Bosch food processor - cuts into cubes!

Unfortunately, there is nothing to take a picture of Galina! Just dial bosch micron 5540 on the Internet and see the picture!

Unfortunately, there is nothing to take a picture of Galina! Just dial bosch micron 5540 on the Internet and see the picture!

That is, Alena, what is suitable for the Cube is that which matches the 5540? I mean the whisk. It looks like one that is on sale for 68885, but some small photos on the Internet, it is not clear ... But it is not written that it fits 5529 - neither one nor the other ...

The photo was right here, a corolla from 5540 reply from October 10 There you can see that I beat them (4 speeds on the regulator), and the lid is from the cube.

Yes, they are the same, I mean harvesters, they differ in power, a cube nozzle, so the whisk fits, the girls bought in addition, somewhere in the subject there is a report!

The photo was right here, a corolla from 5540 reply from October 10 There you can see that I beat them (4 speeds on the regulator), and the lid is from the cube.

[STOP - CUBIX has the same bowl !!!]

I have already congratulated in another Temka. Regarding the choice, I will say this: if there is a small kitchenette, BUT the distance from the countertop to the cabinets above it is quite large - then 68885. We hope that Aina will measure the height - in a different Temko. If your distance is less, it means Cubix. The cost is 68885 - about 10 thousand. We bought a cube in the summer for 5300 in the online store. Additional Cube attachments can be ordered ex tempore - as required. They are already included with the 68885. Is the power high? The slicing difference is in seconds. People are silent about the whisk. And this is where power plays a role. I have to ask. And it's also good that the 68885 has a larger bowl - 3.9 liters. Are you preparing such volumes? Then yes. Kubix is ​​enough for me. STOP - CUBIX has the same bowl !!! , I was mistaken. And I have already ordered all the attachments I need, together with the "handbag" that is included in the 68885 kit. In total it turned out cheaper than buying 68885.
Problems with the whipping disc in the Cube? Undercut. And new ones are now being released without this marriage. There is no disc in 6885, there is a rim. You can buy a whisk for US. Who else would tell me all the same how he is spinning in our 5529 ?!
Management 68885 - only impulse, at least as it is written in one of the online stores. You can't go away, you have to nurse! And we have a pulse mode, and 1, and 2 speeds. No, I'm for the Cube. And you really decide!

I also really wanted Cubix at first and still think it is a great option! It's just that I managed to take this harvester for $ 200, and the cube costs 160 + I really wanted a julienne grater and a whisk, but it would have come out somewhere the same, that's all the math
This one is more compact, not much of course, but still. Power for shredders, slices does not play a role at all, but for kneading beaters it is very even. And back in 68885 NOT ONLY PULSE mode, as you might think, there are about 4 speeds (they just are not labeled) + Pulse mode (I don't know what it is yet) + "M" mode (this is just a pulse, the handle is back)
I haven't whipped the squirrels yet, but I whipped 20% sour cream today, I won't say that it was super fast, but still it was whipped and pretty good. just 20% I practically did not whip with an ordinary mixer, only the sugar broke, but here it is fluffy

The photo was right here, a corolla from 5540 reply from October 10 There you can see that I beat them (4 speeds on the regulator), and the lid is from the cube.

In general, we must bra-a-at ... I understood everything, thank you very much. I wonder if this whisk fits the cube, why is another whisk offered for 68885 ?! And this is not a Bosch service, a spare parts service ... And the corollas seem to be different. Boggles the mind ... Everything is interchangeable, except for the whisk ??? Very strange.

[NOT ONLY PULSE]

And back in 68885 NOT ONLY PULSE mode, as you might think, there are about 4 speeds (they just are not labeled) + Pulse mode (I don't know what it is yet) + "M" mode (this is just a pulse, the handle is back)

I looked about speed on the Internet, it was written there ... They make a fool of our brother! Rather, my sister))

The 68885, as I saw in the picture, has a replaceable rotating shaft or something similar, maybe it is incompatible in the grooves. I would feel it in the store.

I'm here, but not for long. Yesterday I took pictures, went to the forum ... I hear a strange sound from the computer - the fan on the video card has broken. He went through three repairs, the last one a few days ago. Judging by the noise from old age, the bearing is crumbling. I have now applied a soldering iron, machine oil and the life-giving power of blue electrical tape to him - it knocks, but somehow it works. While he is more likely to live, so I quickly post photos:

This is the rotating shaft 5529 and 5540. See the difference? Me not.

This is a whisk, like this it sits on the shaft of 5540:

and so it burst, while stirring semi-soft oil


The point is this: the whisk should spin quickly, so its gears cling to the fastest rotating part of the shaft, and it makes circles two times slower - so the lower part of the nozzle falls through to the third "step" of the hooks on the shaft. I hope I wrote it clearly

Hello block lovers!
I am in the process of a difficult choice between Cubix, 68885 and MUM 54251. The kitchen is small, so the second option will most likely be ordered. But, there is no berry wiper in it. Tell me, is the cube wiper suitable for 68885?

Hello block lovers!
I am in the process of a difficult choice between Cubix, 68885 and MUM 54251. The kitchen is small, so the second option will most likely be ordered. But, there is no berry wiper in it. Tell me, is the cube wiper suitable for 68885?

unknown Itself would like to try

I'm here, but not for long. Yesterday I took pictures, went to the forum ... I hear a strange sound from the computer - the fan on the video card has broken. He went through three repairs, the last one a few days ago. Judging by the noise from old age, the bearing is crumbling. I have now applied a soldering iron, machine oil and the life-giving power of blue electrical tape to him - it knocks, but somehow it works. While he is more likely to live, so I quickly post photos:

This is the rotating shaft 5529 and 5540. See the difference? Me not.

This is a whisk, like this it sits on the shaft of 5540:

and so it burst, while stirring semi-soft oil


The point is this: the whisk should spin quickly, so its gears cling to the fastest rotating part of the shaft, and it makes circles two times slower - so the lower part of the nozzle falls through to the third "step" of the hooks on the shaft. I hope I wrote it clearly

And the 68885 has a completely different rim design with one large gear.

I will ask more here. I found on the same site two Kubik combines at different prices, they look the same, but one of them has BOSCH MCM 5529+ MUZ45RS1 added in the name. What exactly does this abbreviation - (... + MCZ4RS1) mean? And in the BOSCH MCM68885 combine, though on different sites, I found the same difference. Maybe that's why the price for them is different? BOSCH cube MCM 5529 - ( 🔗 ) is more expensive than BOSCH MCM 5529+ MUZ45RS1- ( 🔗 ) I do not understand what the question is?

I will ask more here. I found on the same site two Kubik combines at different prices, they look the same, but one of them has BOSCH MCM 5529+ MUZ45RS1 added in the name. What exactly does this abbreviation - (... + MCZ4RS1) mean? And in the BOSCH MCM68885 combine, though on different sites, I found the same difference. Maybe that's why the price for them is different? Cube BOSCH MCM 5529 - () turns out to be more expensive than BOSCH MCM 5529+ MUZ45RS1- () I don’t understand what the question is?

I took Bosch 68885 in this store. They also promised me a grater, and then they apologized and said that it was for another series of combines. About 5529 + grater - I don't know. And I can only say good things about the store: it was delivered on time, the price was right, everything is whole and everything works, besides, as it turned out, it’s Polish (we bought and brought it from Poland).

I took 5529 + MCZ4RS1 (grater for potato pancakes) as a gift, but I do not remember which internet store. I'm happy.

I will ask more here. I found on the same site two Kubik combines at different prices, they look the same, but one of them has BOSCH MCM 5529+ MUZ45RS1 added in the name. What exactly does this abbreviation - (... + MCZ4RS1) mean? And in the BOSCH MCM68885 combine, though on different sites, I found the same difference. Maybe that's why the price for them is different? Cube BOSCH MCM 5529 - () turns out to be more expensive than BOSCH MCM 5529+ MUZ45RS1- () I don’t understand what the question is?

MUZ45RS1 pancake disc (round disc)
Description Grater for making fresh vegetables puree (for example, for grating raw potatoes for pancakes or potato dumplings). Material: stainless steel.

Bosch Slicing disc MCZ4RS1 shredding attachment (rectangular)
Application for cooking potato pancakes, vegetable salads

Will the information help?

I took 5529 + MCZ4RS1 (grater for potato pancakes) as a gift, but I do not remember which internet store. I'm happy.

Great! And I will have to buy.

The point is this: the whisk should spin quickly, so its gears cling to the fastest rotating part of the shaft, and it makes circles two times slower - so the lower part of the nozzle falls through to the third "step" of the hooks on the shaft. I hope I wrote it clearly

Wasp, thank you very much for your answer! Hi tech-savvy users! Now I know for sure that the shaft is the same! But I didn't understand how to prevent this breakdown. And who fails where, so that I do not accidentally fail him ?! I think the oil needs to be taken very soft, also because 5540 is more powerful than 5529.

Wasp, thank you very much for your answer! Hi tech-savvy users!

Thank you for the kind words, I feel I need to open a separate topic, purely for technical support: what connects to what, which nozzles fit where (with pictures and crash tests).
I noted in the picture how I imagine dividing a rotating shaft into "fast" and "slow", the dotted line runs along the gap between the plastic parts. So the corolla nozzle sits firmly (all the way) on the lowest teeth, and the plastic gears that transmit movement to the wires of the corolla cling to the upper teeth.


I pre-soften the oil in the microwave. Although the 5540 has more power, but at first speed it spins rather slowly and if something goes wrong, you can stop the combine literally at the "first turn"

Thank you for the kind words, I feel I need to open a separate topic, purely for technical support: what connects to what, which nozzles fit where (with pictures and crash tests).
I noted in the picture how I imagine dividing a rotating shaft into "fast" and "slow", the dotted line runs along the gap between the plastic parts. So the corolla nozzle sits firmly (all the way) on the lowest teeth, and the plastic gears that transmit the movement to the wires of the corolla cling to the upper teeth.


I pre-soften the oil in the microwave. Although the 5540 has more power, but at first speed it spins rather slowly and if something goes wrong, you can stop the combine literally at the "first turn"

Yes-ah ... Cool! THANK YOU!!! I think you can try to cut the butter into pieces - well, so as not to choke. Somehow I don't want to go in the microwave, I heard that the radiation is there. And then at one time I was sitting next to (we had repairs) with a microwave, and I had big health problems
Corolla after such a super-detailed consultation - ordered!
In general, I must say that I arrived the other day from the dacha. How I arranged all my devices ... and I also think that there is nowhere else to go. It is necessary to master the space in the country house. We barely fit with a Cube, a bread maker, a blender ... And the dryer now walks between the kitchen and the room ... I still think to drive the bread maker into the room. And Cube with a blender - no way!

Somehow I don't want to go in the microwave, I heard that the radiation is there.And here at one time I was sitting next to (we had repairs) with a microwave

You really don't need to sit next to her, at least 80 cm from the door ... or it is better to put it in a corner so that no one is irradiated. Mom's standing on the fridge and "beaming" above their heads, ours is at the entrance a meter from the table. It is necessary to write technical clarifications in the topic about microwaves

You really don't need to sit next to her, at least 80 cm from the door ... or it is better to put it in a corner so that no one is irradiated. Mom's standing on the fridge and "beaming" above their heads, ours is at the entrance a meter from the table. It is necessary to write technical clarifications in the topic about microwaves

And the products? They are also irradiated ...
And the whisk with the holder will take a long time. I ordered an order, but it is not available, they will be taken from Germany. So for now I will learn "from cats", that is, purely theoretically. So what was the "stupidity" that led to the breakdown? Did he just dislike the hardness of the oil, or was the speed too high? Here in another Temko Aina said that brutal power is not really needed. Although the dough and whipping is just the very clinical case when you need it))

And the products? They are also irradiated ...

Nothing in the microwave can be irradiated. The principle, in brief, is the effect of ultra-microwaves on the water molecules in food. Forcing them to change their motion following billions of times per second. This is why they heat up and our food heats up.
That is, these are waves - electromagnetic waves. Radio, TV, cellular, etc., only of very high frequency and power. Yes, if the cell phone was 800 watts, then the brain would boil. But there is only 1 watt. The stove is well shielded. A million measurements were taken. And the fact that you, for example, come to the stove and feel how your head begins to heat up, we ourselves are "winding up". We make you think so. This is a well-known technique, as charlatans, supposedly healers, lead their hands around the head and we feel warmth. We set ourselves up like that.
I absolutely do not want to convince anyone, but open the Internet and read at least the wiki. Sorry for offtopic. But stoves appeared decades ago and all this supposed harm was checked 100,000 times. I can sit with her in an embrace for hours and nothing will happen.
It is important to understand the correct meaning of the words - exposure and radiation. It's like different things.

Nothing in the microwave can be irradiated. The principle, in brief, is the effect of ultra-microwaves on the water molecules in food. Forcing them to change their motion following billions of times per second. This is why they heat up and our food heats up.
That is, these are waves - electromagnetic waves. Radio, TV, cellular, etc., only of very high frequency and power. Yes, if the cell phone was 800 watts, then the brain would boil. But there is only 1 watt. The stove is well shielded. A million measurements were taken. And the fact that you, for example, come to the stove and feel how your head begins to heat up, we ourselves "wind up". We make you think so. This is a well-known technique, as charlatans, supposedly healers, lead their hands around the head and we feel warmth. Yes, we set ourselves up like that.
I absolutely do not want to convince anyone, but open the Internet and read at least the wiki. Sorry for offtopic. But stoves appeared decades ago and all this supposed harm was checked 100,000 times. I can sit with her in an embrace for hours and nothing will happen.
It is important to understand the correct meaning of the words - exposure and radiation. It's like different things.

I know everything about molecules. We will not be in this thread. Thanks for your attention anyway.

Yes ! bummer another time! But I beat the eggs, but the flour neatly with handles, the dough turns out to be airy, and the biscuit rises well! (y) Another dough can be done with a combine, but a biscuit: pardon: Yes, the squirrels in the cube are gorgeous!

And what was whipped? Disk? I don’t understand if my disc is sitting low or not. It looks like sitting. It is necessary to cut ... I have a Slovenian assembly.

And what was whipped? Disk? I don’t understand if my disc is sitting low or not.It looks like sitting. It is necessary to cut ... I have a Slovenian assembly.

I whisk Galina with a whisk from 5540 and I have Slovenia!

And what was whipped? Disk? I don’t understand if my disc is sitting low or not. It looks like sitting. It is necessary to cut ... I have a Slovenian assembly.

Have you ever tried it with a disc? Try without "sawing", maybe you have it normal!

Have you ever tried it with a disc? Try without "sawing", maybe you have it normal!

Sits low ... what if he scratches my cup ?? I will not survive! And then I read that if idle - not sawing, but with food - it can.

Sits low ... what if he scratches my cup ?? I will not survive! And then I read that if idle - not sawing, but with food - it can.

and where should he scrub the bowl?

And what was whipped? Disk? I don’t understand if my disc is sitting low or not. It looks like sitting. It is necessary to cut ... I have a Slovenian assembly.

I also have a Slovenian assembly - the disc did not scratch anything
Also included with a shuddering heart .. but everything is ok))))

So what was the "stupidity" that led to the breakdown? He just didn't like the hardness of the oil ...

Yes, it was the hardness. The oil was heated on the table, it felt normal to the touch (in my opinion), so I put it in four large cubes (the size of 1-1.5 matchboxes) in the bowl. Started out at low speed. The whisk cut off the soft top, then on the N-th pass he crushed a piece of butter under him and clamped it between the twigs and the central "pipe" of the bowl. The wires did not cut through the cold central part of the oil, the rim would go up - but then the lid did not let it in, then it somehow bent to the side, twisted, from which the top "cover" of the nozzle bounced off, or rather, the latch support, which had shown earlier, burst on it ...

Yes, it was the hardness. The oil was warming up on the table, it felt normal to the touch (in my opinion), so I put it in four large cubes (the size of 1-1.5 matchboxes) in the bowl. Started out at low speed. The whisk cut off the soft top, then on the N-th passage he crushed a piece of butter under him and clamped it between the twigs and the central "pipe" of the bowl. The wires did not cut through the cold central part of the oil, the rim would go up - but then the lid did not let it in, then it somehow bent to the side, twisted, from which the top "cover" of the nozzle bounced off, or rather, the latch support, which had shown earlier, burst on it ...

Sorry for the whisk ... He wanted the best! And here I got my own hook for dough, medium grater for potato pancakes and a bag. I also ordered a new pusher by mistake. I thought it was something that narrowed the hole for products even more. But alas. This was far from obvious on the website. Of course, nonsense - only 200 rubles, but ...
I have an average grater with a curved squiggle, although I ordered a straight line. It is interesting to know how the curved shredder (on the back of the middle grater) differs from the straight one. I haven't tried anything yet. I asked on the site, they told me that these are such supplies now, and they can not offer me anything else. So okay! What's the difference ?!
Yesterday at the post office there was a queue of 17 people, today - at 15. I had to defend ... Despite this, I paid for the order for a whisk - don't bother! Wait up to 45 days. This is a "spare parts" site.

I also have a Slovenian assembly - the disc did not scratch anything
Also included with a shuddering heart .. but everything is ok))))

Gerda, how high is your disc relative to the bowl? Could you measure? And then I dodge this attachment, or maybe in vain.

and where should he scrub the bowl?

Well, it just SHOULD NOT))) But it happens that the disc sits low and scratches the bottom of the bowl, some right up to the shavings on the bowl. Do you have a CD in the set in 68885 too?

[Astrologina]

Astrologina, from the bottom to the top point of the disc approx. 7-8 mm
From the bottom to the bottom point of the disc approximately 1-1.5 mm
It is difficult to measure more accurately

Well, it just SHOULD NOT))) But it happens that the disc sits low and scratches the bottom of the bowl, some right up to the shavings on the bowl. Do you have a CD in the set in 68885 too?

No, I only have a whisk. I just realized just now what kind of disc it is, such a white one with pimples? But how can they beat something?

[Astrologina]

Astrologina, from the bottom to the top point of the disc approx. 7-8 mm
From the bottom to the bottom point of the disc approximately 1-1.5 mm
It is difficult to measure more accurately

Gerda, thanks !!! It seems to me that I have no distance there at all. And when you put the disc on a white long holder, even without a combine, you can see that the circle, which is at the very base of the holder, protrudes. I think he will scratch. When spinning idle, it doesn't scratch, but I don't spin for long. And what will happen to the products? ..
This is how it looks when worn on the holder:

It can be seen that the holder turns out to be higher than the disc when this whole structure stands on the combine. And the holder does not stick out - the disc ring sticks out. When all this rises on the bowl, then the gap between the bowl and the disc is not visible at all.

No, I only have a whisk. I just realized just now what kind of disc it is, such a white one with pimples? But how can they beat something?

Yes, it's white with pimples. And if it worked (well), then it would beat - whites, for sure. But some beat not only eggs, but also butter them.

[Astrologina]

Astrologina, dada, he stands at the bottom of the disc ... and this is exactly how he stands ...
I went to look at it again ... it looks exactly the same as in your photo ... the holder is above the disc
I remember my first impression when I bought a harvester ... everything is kapets ... the disc lies at the very bottom and will scratch ..
But she dared to beat the eggs - everything is ok)))

then whisk - whites for sure

he whips squirrels, but I DON'T LIKE ((((((
heat up very quickly

but to be honest ... I used this disc only 2 times ... once whipped the squirrels and once the eggs on the charlotte - I didn't like it ... the charlotte with a mixer turns out tastier, more porous

... a charlotte with a mixer turns out to be tastier, more porous

Well, let's beat it with a mixer. Yesterday I made a wonderful charlotte - a mixer. And the fact that it is only 280 W did not hurt at all. Why are we going to hammer nails with a microscope. The cube is for more elevated purposes

Well, let's beat it with a mixer. Yesterday I made a wonderful charlotte - a mixer. And the fact that it is only 280 W did not hurt at all. Why are we going to hammer nails with a microscope. The cube is for more elevated purposes

And I really like the whisk The main thing is that both hands are free

And I really like the whisk The main thing is that both hands are free

And the corolla is like a bouquet tied in front of a running horse! Ordered, expected!

all

Thank you so much for kicking me

Harvester conversations are always helpful!

Then they answered me with "spare parts" about the disk. THE CONSTRUCTION HAS NOT CHANGED. IT'S USUALLY RUBBERS WITH AN EMPTY BOWL, BUT SHOULD NOT BE WITH A PRODUCT. Of course it shouldn't. who would argue! BUT rubs well, erases the bottom of the bowl ... And just with the food, and not without them.

Then they answered me with "spare parts" about the disk. THE CONSTRUCTION HAS NOT CHANGED. IT'S USUALLY RUBBERS WITH AN EMPTY BOWL, BUT SHOULD NOT BE WITH A PRODUCT. Of course it shouldn't. who would argue! BUT rubs well, erases the bottom of the bowl ... And just with the food, and not without them.

Galina, have you already tried it?

Could you please tell me which number, article of medium grater, to mum 4756? And will the grater fit this wiper?

Galina, have you already tried it?

No, and I won't. Since the design has not changed, then it is dangerous.

I answered the wrong place, mixed up two topics

Could you please tell me which number, article of medium grater, to mum 4756? And will the grater fit this wiper?

The holes are the same as for MSM 5529 and 68885. Looks like:

right!
I myself will buy ... an average grater like this:

It is better to be guided by the type of holes, and not by the article. For example, on the site "spare parts" the articles are: "Disc-grater / shredder average 463690 = 468742 = 573024 Bosch Siemens" Actually, what do you need an average grater to clean ?? All graters that match 5529 and 68885 (namely graters) will work with mum 4756.

Could you please tell me which number, article of medium grater, to mum 4756? And will the grater fit this wiper?

What is a "grater"? I still don't understand the site where they are all under article numbers
Here are all the attachments

🔗food-processors-attachments-and-accessories.htm

graters

🔗food-combines-disc-graters.htm

MUM discussion https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=136353.560

... a site where they are all under article numbers

The link with the articles - alas, does not work. But the rest works. Thank you!

Corrected everything to other links. Bosch works on the site continuously