subiata
This topic was created in order to make information about combines of this series more convenient and accessible for members of the forum. It was born on the basis of the topic about the combine model 68885, which was a little inconveniently located on the forum. Therefore, the participants in the topic got there by chance, and it was difficult to purposefully find information about these combines.
This model of the combine is quite new and is just gaining its fans. And there will probably be enough of them. There is no point in continuing to discuss one model (68885). Therefore, I propose to discuss the entire MSM 6 MultiTalent series. After all, different models may suit different users. It depends on what we expect from this harvester and whether we are ready to pay more for these or those attachments.
Link to topic at 68885: https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=302589.0

To begin with, I offer general information, taken from the Bosch website.

BOSCH MCM6 food processor (MultiTalent series)
The series includes combines that differ from each other in engine power and configuration.
Depending on the engine power, the models can be grouped as follows:
Motor power 1000 W:
- 62020
Motor power 1200 W:
- 64051
- 64060
- 64085
Motor power 1250 W:
- 68840
- 68861
- 68885
(The list may be updated as new information becomes available)

Components common to all models:
Large plastic bowl with lid and pusher, volume 3.9L for 750g flour + the same amount of ingredients (max. 1.5 kg)
Blender (plastic), volume 1.5 l
Wavy edge knife
Kneading attachment (plastic)
Double-sided disc - shredder (coarse / fine)
Double-sided disc - grater (coarse / fine)
Stainless steel whisk steel for whipping cream, egg whites and light dough
Disc holder

Attachments depending on the combine model
Food processor Bosch MCM6 (MultiTalent series)
subiata
https://Mcooker-enn.tomathouse.com/in...=com_smf&topic=302589.20- here is a photo with measurements of the combine
https://Mcooker-enn.tomathouse.com/in...n=com_smf&topic=302589.60 - photo report
Here are the reports of using the combine 68885 by user Aina, my inspiration for the purchase. Before that, I was looking for a combine of this shape and with dicing for a long time and to no avail. I already wanted to buy 5529, but then I accidentally saw Aina's message and found a suitable option.
Tatiana0303
And where can I buy additional attachments for 68885, are they expensive, I can't find something
subiata
The girls write that there is not enough medium grater for 68885 (MUZ45KP1 - as far as I understand). I personally have enough equipment. Therefore, I was not much interested in places and prices. I only know that you can buy them in service centers and home appliances stores. In Ukraine, there is Foxtrot, full of Internet shops. I saw the cost of grater disks / shredders from 70-80 to 130 UAH. I do not know where you are from, but in any case, you can enter the code of the desired attachment in the search and see what online stores in your region sell them.
Tatiana0303
Thank you for your participation, I am from Chita, this is Transbaikalia and we have little that we have, this model is not in the whole city, I arranged delivery, I am waiting the other day. I have already tortured everyone at home, they are probably more waiting for me to switch to the combine. I want a fries attachment for it. By the way, if anyone is interested, today I came across the transfer of Yulia Vysotskaya, there they advertised this combine, told and showed about it here is the link 🔗 There he prepares "Open Pie with Chicken and Eggplant, Spaghetti with Trout and Gin and Chocolate Soufflé" dated November 24, 2013
Tatiana0303
🔗 here's the harvester in the program
Tatiana0303
Well, finally, I got my long-awaited Boshik68885. There are pluses, there are minuses, if anyone is interested in this model, ask, I will be happy to answer, since I myself had many questions.
subiata
Congratulations. Let him serve faithfully.
Paul @
Quote: Tatiana0303

Well, finally, I got my long-awaited Boshik68885. There are pluses, there are minuses, if anyone is interested in this model, ask, I will be happy to answer, since I myself had many questions.
Very interesting about the pros and cons. The combine should be brought to me one of these days.So, if it's not difficult, please tell us.
Tatiana0303
Quote: subiata

Congratulations. Let him serve faithfully.
Thank you!
Tatiana0303
Quote: Paul @

Very interesting about the pros and cons. The combine should be brought to me one of these days. So, if it's not difficult, please tell us.
Look right away so that there is an instruction, I found it only at home, now I have to go after it, the short cord did not please me, it is pushed back with difficulty, the blender has no spout, but in general I do not consider all this to be minuses, so small flaws, I am very pleased with the purchase, grated carrots on a fine grater, beets on a coarse one, made dough on dumplings, chopped onions, mixed minced meat, grated potatoes on potato pancakes, mixed them in a bowl with onions with knives (they wrote about this on the site), made a cocktail in a blender, in general I use it to the fullest. The quality pleased me, everything was done soundly, it is fastened well, nothing dangles. Of course I would like to add. nozzles: fries, medium grater, grinder. But everything is just fine
subiata
Comparing with Filia, it seemed to me a little more difficult to collect and wash the attachments. For example, there are four protrusions in the bowl because of which washing the bowl is worse. But, as it seemed to me, these protrusions, in addition to the direct function of holding the grater attachment, contribute to the throwing of products from the walls to the center when chopping with a universal knife, which improves chopping. So all the disadvantages that I noticed are not so important. I'm already used to assembling and disassembling. So I am very happy.
Paul @
Quote: Tatiana0303

Look right away so that there is an instruction, I found it only at home, now I have to go after it, the short cord did not please me, it is pushed back with difficulty, the blender has no spout, but in general I do not consider all this to be minuses, so small flaws, I am very pleased with the purchase, grated carrots on a fine grater, beets on a coarse one, made dough on dumplings, chopped onions, mixed minced meat, grated potatoes on potato pancakes, mixed them in a bowl with onions with knives (they wrote about this on the site), made a cocktail in a blender, in general I use it to the fullest. The quality pleased me, everything was done soundly, it is fastened well, nothing dangles. Of course I would like to add. nozzles: fries, medium grater, grinder. But everything is just fine
Wow, how much have you prepared. How noisy is it? When do the dough not try to escape? Have you tried whipping whites? It's a pity that the blender has no spout, it's not very convenient to pour.
Tatiana0303
Quote: Paul @

Wow, how much have you prepared. How noisy is it? When do the dough not try to escape? Have you tried whipping whites? It's a pity that the blender has no spout, it's not very convenient to pour.
By the way, when I poured the cocktail, I forgot about the nose that it was not there, the cocktail was too good, I used to do it only submerged, but that's not it. Not very noisy, turned on maximum speed, quite acceptable noise, cube 5529 makes much more noise. It doesn't run away with the dough, but I kneaded for 30-40 seconds, that's enough, I put it in a ball and in the refrigerator, the dumplings are super, I haven't reached the proteins yet, only two days I have it, everything is ahead
locman
And this food processor is not hard to clean if there is no dishwasher? What parts do you need to wash - nozzles, bowl, what else?
subiata
No, it's not hard at all. I always wash it with my hands. Everything is washed, except for the motor unit, of course. It can be wiped with a damp cloth as needed. Everything else is washed like ordinary dishes. I just try to keep less water on the connectors on the blender underneath and inside the whisk reducer. Although there is nothing wrong with that. If suddenly the bowl and knife are heavily smeared, for example, into the dough, then you can pour a little water with detergent and twist at a low speed for a couple of minutes. On my old Phillips, I even had a special button for this.
Paul @
Hurrah! Yesterday the combine was delivered to its permanent place of residence. Handsome. Made very soundly, does not take up much space.
First of all, I made a vinaigrette, great. Washes very quickly and easily. In the process of unwinding the bowl lid, I forgot to pull out the pusher
and he accidentally fell on the tile, you need to buy a new one. And so, while the purchase is very happy.
Tatiana0303
Quote: Paul @

Hurrah! Yesterday the combine was delivered to its permanent place of residence. Handsome. Made very soundly, does not take up much space.
First of all, I made a vinaigrette, great. Washes very quickly and easily. In the process of unwinding the bowl lid, I forgot to pull out the pusher
and he accidentally fell on the tile, you need to buy a new one. And so, while the purchase is very happy.
Congratulations!!! Our ranks have grown! Be careful!
Paul @
Quote: Tatiana0303

Congratulations!!! Our ranks have grown! Be careful!
l

Yes thank you. I didn't immediately understand that this pusher can be divided into two. Can you tell me how to use it?
By the way, just in case the price of each part of the pusher is 35 UAH.
Aina
Quote: Paul @

Yes thank you. I didn't immediately understand that this pusher can be divided into two. Can you tell me how to use it?
This is convenient if you want, for example, to cut a thin and long cucumber into slices. If you insert it into a wide "throat" towards the end of the cut, the cucumber will settle flat and will be cut not across, but along, and if through the insert, then the neck there is rather small, it will not allow either the egg or the carrot-cucumber to roll over. I have recently been using the insert to crumble the onion in half rings or quarters, because in the big throat the onion jumps and turns over, as a result, "sho horrible" is cut
Link to another topic about
Food processor Bosch MCM 68885
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=302589.0
Aina
subiata!
It's good that we opened the topic where it belongs!
Tatiana0303
Quote: Aina

This is convenient if you want, for example, to cut a thin and long cucumber into slices. If you insert it into a wide "throat" towards the end of the cut, the cucumber will settle flat and will be cut not across, but along, and if through the insert, then the neck there is rather small, it will not allow either the egg or the carrot-cucumber to roll over. I have recently been using the insert to crumble the onion in half rings or quarters, because in the big throat the onion jumps and turns over, as a result, it is chopped "sho horrible"
Djn pljhjdj That's great, but I myself didn’t know why there are two of them, I haven’t figured it out in such a short time. What a useful site after all!
subiata
While I was writing a detailed answer, you have already managed to tell everything about the pusher.
It's good that we opened the topic where it belongs! Girl winks
It seemed to me that here it would be easier to find for those who are interested in a particular combine. It's a pity, of course, that a lot of information remained in that topic, but I posted links here. I think it will be convenient.
Aina
Quote: Tatiana0303

What a useful site after all!
From this "usefulness" in my kitchen I can't push through
But all that is necessary and working, damn it ...
Aina
subiata, Svetochka, please make all references to the old topic active
Go to the "edit" of the message, then select the entire link starting with http //, then above the emoticons there is a panel with icons, click on the "blue globe with a leaf" (aka a hyperlink, aka 4th in the bottom line). It's more convenient to use links
subiata
Unfortunately, I no longer have such an opportunity. Before December 9th, I can't fix anything.
Aina
Quote: subiata

Unfortunately, I no longer have such an opportunity. Before December 9th, I can't fix anything.

badly...
Aina
I want to share my delight with kneading dough in this harvester. The dumplings, tight-pertuge kneads perfectly with a plastic knife, if I mix this with my hands, then I will not have the strength to roll and sculpt.Everything is quick and simple here
Since the purchase of the combine, we eat dumplings / dumplings every week, if not twice a week
Yeast - also kneads with a bang! I have no bread maker, there is nothing to compare, and I am not a master of yeast, but with this combine I have a desire to cook!
He was bought, by and large, for the sake of graters and, perhaps, for the whisk, but he turned out to be a jack of all trades. Graters are now less in demand than a kneader and a whisk. I enjoy all its capabilities, except for the blender bowl (I have a blender-immersion leg and I love it very much). Like this!
As for graters: a little annoying to chop a small volume - I chop the old-fashioned way by hand, well, if one onion, for example, (for this purpose, I dream of a compact vegetable cutter)
Fanta
Hello! It's good that there is such a site where you can find out and ask everything !!
That's all I'm thinking about this combine, I really liked it externally ...
But I really want a miller to join him !!! Do they exist at all?
And the question of the price puzzled: on Fotos - UAH 2764, and on GSL - UAH 1778 ??? 1000 UAH difference ??? Why?
subiata
I don't know the reason, but I can only say that there are Polish stickers on the box and it was sent from Lvov. Apparently the store has some kind of cheaper purchasing mechanism than others. I bought from them myself and am happy with the product. I also had my doubts, but everything is fine. I used to buy meat grinders from them for a gift and was satisfied. There are millers for them. They are equipped with two models from this series. But they don't have a cube cutter. I think they are on sale somewhere. Well, or soon they will.
Aina
Quote: Fanta

Hello! It's good that there is a site where you can find out and ask everything !!
That's all I'm thinking about this combine, I really liked it externally ...
But I really want a miller to join him !!! Do they exist at all?
And the question of the price puzzled: on Fotos - UAH 2764, and on GSL - UAH 1778 ??? 1000 UAH difference ??? Why?
Everything is very simple ... smuggling from Poland to Lviv There is nothing terrible for us, on the contrary, these Polish guarantees indicate that this was done for Poland (read for the European Union). I also bought through the Lviv online store. I'm happy with the product. At a price all the more
... And about the mill ... I don't know if there is one for this model, but I know for sure that mills for Bosch combines are microscopic, literally on a tablespoon, and this accessory will cost 100% expensive, up to the cost of a full-fledged freestanding coffee grinder normal volume of the same Bosch manufacturer
Fanta
Subiata, Aina! Thanks for the clarification! And then I was completely puzzled!
Aina
Quote: Fanta

Subiata, Aina! Thanks for the clarification! And then I was completely puzzled!
I was also very afraid to take "not at home", and the price was embarrassing, but everything is fine, so no doubts
Paul @
I also bought in this store, everything is fine. On the box were receipts stating that he came from Lviv.
Russian translation in the instructions and on the box.
Fanta
Wow! I ordered BOSCH MCM68885 ... I hope I will be happy with it !! I'm worried about something !! And I don't even know why ...
Tatiana0303
A familiar feeling, but it passes instantly when the long-awaited "meeting" comes. Today I made a marinated fish and mashed potatoes, so onions (shredded in half rings) and carrots (grated) in two minutes, and mashed potatoes with a knife are just lovely, airy. I was afraid that the same as the leg of the blender will turn out, sticky, but no. I’m still thinking and why I didn’t have a combine before, so much time and effort was wasted. So don't worry, the harvester is superb and the design and quality
Aina
Quote: Tatiana0303

A familiar feeling, but it passes instantly when the long-awaited "meeting" comes. Today I made a marinated fish and mashed potatoes, so onions (shredded in half rings) and carrots (grated) in two minutes, and mashed potatoes with a knife are just lovely, airy. I was afraid that the same as the leg of the blender will turn out, sticky, but no. I’m still thinking and why I didn’t have a combine before, so much time and effort wasted. So don't worry, the harvester is superb and the design and quality
And now I can't imagine life without a combine. Kneading the dough for one or two, I did not even suspect that it was so simple.
My 2 friends have harvesters living on the balcony, and mine works in the kitchen and I love him very much
The other day on the menu were: pickle, pilaf, vegetable salad and a roll with raisins. All this was cut, grated, chopped and kneaded by Boshik. In time, it may not turn out super quickly, until you collect everything, wash it, but I do not get tired of work at all, but I enjoy it, because you can’t cut the cubes so beautifully on a pickle and carrots, but onions and carrots for pilaf (and I I put a lot) until you cut it, rub it, that you don't want pilaf
Fanta
Thank you for your support and help !!!
Oh! And with Nikolaychik ALL !!! Health, fun and GIFTS !!!!
Yulia85
Good day. I am to you for advice. Most recently, I became the owner of this combine. There are no complaints about dicing, everything is fine. but with the dough there is some kind of trouble.the first time I kneaded the dough for cookies, not a tough dough, the second time with yeast - and for the first time, the second time, the dough seeps through the accessory holder and then the whole drive is in the dough. I really don't know what to think, either I'm crooked or something with the combine.
Tatiana0303
Quote: Yulia85

Good day. I am to you for advice. Most recently, I became the owner of this combine. There are no complaints about dicing, everything is fine. but with the dough there is some kind of trouble. the first time I kneaded the dough for cookies, not a tough dough, the second time with yeast - and for the first time, the second time, the dough seeps through the accessory holder and then the whole drive is in the dough. I really don't know what to think, either I'm crooked or something with the combine.
Yes, there is such a thing, but I would not say that it is all covered in dough, only a little below, you do not touch it, I once, by accident, raised and lowered it, so the dough went in there, but I don’t complain. I have already made different doughs, both yeast and dumplings and liquid, and I am happy with everything, I need to adapt. Dare
Yulia85
Tatyana0303, thanks for the quick response. today I was kneading yeast dough so he jumped so much that it even became scary for him, I had to turn it off and knead in another Boshik. Maybe you should get used to it and everything will be ok
Tatiana0303
Quote: Yulia85

Tatyana0303, thanks for the quick response. today I was kneading yeast dough so he jumped so much that it became even scary for him, I had to turn it off and knead in another Boshik. Maybe you should get used to it and everything will be ok
I don’t put very high turnovers, it’s really scary for him, but I read it on the forum for everyone, so it's okay, we'll get used to it
Aina
Yulia85, and you first load the flour into the bowl, and then insert the knife or vice versa? Only once the dough got inside, when I decided to take it out, and then put the knife back and knead it, I don't do that anymore, although there was no particular trouble, nothing got into the motor part itself, just the axle itself got a little dirty - but that's all washes normally.
It was also such that the dough turned out to be initially very steep and already poured water on the formed bun, then the combine resisted not like a child and jumped, and then generally kneaded the dough and wrapped a knife in it and hummed, I was scared - I stopped ... More I don't do that either, now I try to initially make the dough more liquid, and then, if necessary, add a little flour - then a good bun turns out. But I had these "problems" only with yeast dough, but with steep dumplings, I never had any misfires, everything is always going into a bun, even the bowl and knife are clean
Yulia85
Aina, yes, everyone seems to be writing the knife, insert it, then pour in the dry ingredients, turn it on for a couple of seconds to mix, then all the other ingredients. today I will try dumplings dough. let's see what happens.
Fanta
Hurrah! Hurrah! Hurrah! So my handsome man has arrived!
Meet ...
Tatiana0303
Quote: Fanta

Hurrah! Hurrah! Hurrah! So my handsome arrived!
Meet ...
Congratulations!!! Let him serve faithfully :)
Fanta
Thank you!
I liked everything that I experienced yesterday! And the cube, and the blender, and the graters ... I didn't try to beat the whites and didn't understand what to grate on a coarse grater ... such straight pieces ...
So I will definitely order a medium grater and I want it for potato pancakes!
Aina
Quote: Fanta

Thank you!
I liked everything that I experienced yesterday! And the cube, and the blender, and the graters ... I didn't try to beat the whites and didn't understand what to grate on a coarse grater ... such pieces are straight ...
So I will definitely order a medium grater and I want it for potato pancakes!
And I will take the middle one for potato pancakes. If you find something cheaper - beacon!
And we, by the family council, approved a large grater for beets in borscht and carrots in pilaf
Fanta
Quote: Aina

And I will take the middle one for potato pancakes. If you find something cheaper - beacon! : flowers

Oki!
leka
Quote: Yulia85
but with the dough there is some kind of trouble.the first time I kneaded the dough for cookies, not a tough dough, the second time with yeast - and for the first time, the second time, the dough seeps through the accessory holder and then the whole drive is in the dough.

I have the same problem. I made dough three times (not steep, yeast), and washed the drive three times, the dough comes out of the bowl through the attachments. It's not about the quantity (the last time I made the dough from 250 grams of flour and 100 grams of water), the result is deplorable, I scraped off almost all the dough from the drive and attachments. Maybe you need high speed? I did it to a minimum. Girls, share your experience, who kneads the dough (not dumplings or shortbread, there seems to be no problem with it).

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers