Ninelle
Hello everyone! Girls with the coming holiday! Please tell me who has Bosch MUM 56340, MUM 8400, MUM84MP1, MUM 86 harvesters. Has anyone tried to put a cutting attachment on them? Share your experience please ..
sazalexter
The young men will answer https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=136353.20 here I asked a question, they promised to find out. But as they say, to promise does not mean to marry
Anna1957
Quote: sazalexter

The young men will answer https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=136353.20 here I asked a question, they promised to find out. But as they say, to promise does not mean to marry
Yes, I would like to hear from the head of the transport department ...
lunova-moskalenko
Quote: sazalexter

The young men will answer https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=136353.20 here I asked a question, they promised to find out. But as they say, to promise does not mean to marry

Believe me, I myself can not understand where the comrade has gone! When there was a snowfall, there was a connection with it, but here it seems it is almost spring (in some places it is true), and I have heard a dumb ring on the phone for 2 weeks. I can’t go to work, I’ve chilled myself and am lying with neuralgia. Therefore, you can throw at me all the slippers that you have at home, but so far there is no information! Although when we contacted him, he said that in the Bosch service center he was told that all components that are older than your combine, starting with series 5, fit together! But I'm afraid to assert! In order not to buy someone a new harvester later!
Ninelle
Happy holiday, young man! And you, as I understand it, do not have a cubic nozzle? To be honest, for the money I am considering Bosch MUM 56340 .. but I really want to cut into cubes ..
sazalexter
Ninelle No, for Bosch MUM 56340, the nozzle for the cube does not fit, I just assumed that you can screw it through MUZ5MM1
and then I thought that the disc-julienne BOSCH MUZ45AG1 and the disc for french fries BOSCH MUZ45PS1, you need
Ninelle
Here they just wrote on the forum like the fact that the Bosch MUM 56340 has a weak nozzle for cutting into cubes, so I hung up. And I just called the Bosch-Siemens brand store and they told me that it doesn’t fit anywhere except for some 40 combine .. and from this year, they promised a nozzle with cubes for series 8, so for now I’ll probably take a Cube and then give it to my mother , and I will buy for myself already 8 all-metal with a cube nozzle
14anna08
I don’t know where to ask, has anyone ever used an ice cream attachment for MIM 4 combines ...? How convenient and 500 ml is it a very small bowl volume?
Lozja
Quote: sazalexter

And where is such a nozzle? Accessories for MUM4, MUM5

There is such a nozzle, or rather, it was once on sale. You can still find it abroad, namely - on the German Amazon - I don't want to buy.

You shouldn't believe solely the "manufacturer's sites", I put it in quotes, because we have two different ones in Ukraine. Think about it after that. In general, as a merchant, I want to note that if some product is not on your domestic manufacturer's website, then this does not mean at all that it is not in nature, or that it is a fake. Practice has shown that such sites post some part of the product, but not all of the product. Just laziness, I guess.
sazalexter
Lozja Knowing trade firsthand, I can say if something is not on the off-site, then with 90% probability it is not officially imported into the country, hence the lack of any support, unless the device has an international guarantee
Lozja
Quote: sazalexter

Lozja Knowing trade firsthand, I can say if something is not on the off-site, then with 90% probability it is not officially imported into the country, hence the lack of any support, unless the device has an international guarantee

Even if this is so, if it is not imported into the country, this does not mean that there is no such attachment at all, I said this to your surprise. That is, you only recognize the goods that are on the "off-site"? OK. Then tell me which of these sites is the official one?
Judging by the domain, it looks like the first. But after all, domains are such a thing, who got up first, that and sneakers.And what prevents me from creating a similar site, and write that I am of. representative?
This I do not argue, just interesting.

Almost 50% of the goods now have an international guarantee, half of which, by the way, is at the office. sites. Therefore, here you have confused me even more.
sazalexter
Quote: Lozja


Judging by the domain, it looks like the first. But after all, domains are such a thing, who got up first, that and sneakers. And what prevents me from creating a similar site, and write that I am of. representative?

This is decided in court, and as a rule, the owner of the registered trademark wins.
Lozja
Also a store and that's it? And everything looks so official.

Okay, thanks for the educational program. But I still don't understand your surprise about the ice cream maker. There is it, and even was once on sale in Russia, I suspect. They just stopped importing it into your country, but this does not mean that it does not exist in principle. Not everyone is buying exclusively what is only at the office. site.
Lozja
Quote: Anna1957

I have no idea. But when this pops up, I just don't go in.

It is not clear who and how is measuring this reputation there with you. What browser? Maybe a plugin?
Pichenka
Boshe owners, can you please tell me which disk contains the third potatoes for dranniki? I did it for a long time, I forgot which one I was rubbing.
It seems that the grater is not quite suitable. I remember that I picked up some sort of that. Which one then??
Pichenka
Now, I bought them all. I just forgot which one is better. It seemed to me that the one that rubs very shallowly. After washing, everything went into starch.
Well, I will experiment. Maybe from the top combine?
I remembered ... Votzheblin. Turla on this one, on the left.
🔗
and it turned out vermicelli - "bird's nests", not bad, but not that.
But it should have been exactly like this, but in the combine itself - double-sided grater (coarse / fine). He has the one that is small, the very thing that is needed, it is smaller than that of the upper combine.
I think the potato grater is "special" MUZ4RS1 very finely frayed? what is your opinion?
sazalexter
Quote: Pichenka


But it should have been exactly like this, but in the combine itself - double-sided grater (coarse / fine). He has the one that is small, the very thing that is needed, it is smaller than that of the upper combine.
Here on it and rub. What you need
Pichenka
Well, thanks, we figured it out. And then about 2 years ago about this on the conference website 🔗 discussed in the relevant topic. I overcoat everything there, did not find it. Only questions where to get the attachments. The people were just perplexed, everyone wanted to
lunova-moskalenko
Quote: Pichenka

Now, I bought them all. I just forgot which one is better. It seemed to me that the one that rubs very shallowly. After washing, everything went into starch.
Why do you wash the potatoes afterwards? I squeeze it slightly and make shit. As for the small rubbing, here I play as I want to end up with. More gentle shingles or vice versa, more potato-sensing! Then rub on the double-sided too.
Pichenka
No, of course not mine for dranniki, just when I squeezed out after that special one, almost all the potatoes went into starch.
VLeshka
I hope the branch hasn't fallen asleep.
There is a bosch 2050 food processor.
There is no attachment for cutting large pieces of cabbage, carrots, bell peppers, etc. for salad. Yandex says that for this you need to contact the Bosch service center and buy these attachments from them.
I came to the Bosch service center today, they gave me a printed A4 sheet with photographs of the attachments, and I .. could not determine which one was for cutting in large pieces.

I went to the Bosch website, there I found my model bosch 2050, in the accessories there is this nozzle for fries MCZ1PS1 - tell me, is it the same nozzle?
Pichenka
I have different sizes for fries. I shred on them or on the biggest grater
VLeshka
Quote: Pichenka

I have different sizes for fries. I shred on them or on the biggest grater
And you have the largest size for fries, was it included with Bosch2050?
Oca
There is a Bosch MCZ 1PS1 disk
Bosch food processors and accessories
and there is a suspicion that if you tear off the plastic thing, then this disc will fit for series 4 and 5. Who can show this attachment from the other side?
Natasha K
On the refrigerator I want to order a nozzle "Accessory for food processors - Bosch - MUZ-45 SV1" for molding dough, if anyone has one, tell me how much is in demand? You are welcome!
Tiksan
I'll ask more here, otherwise they ignored me in the topic about cubes.
I have a Bosh MCM 68885 harvester. I would like to buy an attachment for wiping berries like the MSM 5529 for it. Perhaps it will do.
Who has MSM 5529, please answer which (top, middle, bottom) part of the drive axle is used for this attachment?
The picture below shows that the drive axle has three types of threads / grooves (I do not know how to do it correctly). On which of them is the berry grating attachment installed?
Bosch food processors and accessories
nika77
Good day, Tiksan!
I will try to answer your question.
My conclusion is that it's still average, look at the attached photo - the grooves on the wiper are identical to the average

Bosch food processors and accessoriesBosch food processors and accessoriesBosch food processors and accessories
in general, I hope it is clear and clearly explained?
Oca
Quote: Tiksan

Who has MSM 5529, please answer which (top, middle, bottom) part of the drive axle is used for this attachment?
Lower (IMHO). I'll show you now...
The wiper has a smooth cylinder with twisted ribs inside, it is slightly wider than the main "trunk" sticking out of the combine. Turned the propeller - scrolls on the upper and middle parts of the drive, clings only to the lower one, putting on it completely, until it stops:
Bosch food processors and accessories Bosch food processors and accessories Bosch food processors and accessories
I saw your early message in the topic of the cube, but something slowed down
nika77
, oops, but Wasp is right
once again looked more closely - the screw is put on to the very bottom (as if it is screwed on a little) and firmly holds on to the lower and middle ribs on the drive axis.
Tiksan
nika77, Wasp, thank you very much! I went to study my drive axle.

I studied. I have two of them - a separate one for the cube cutter. And on it, the grooves are more like the ones you need. Are your cube cutters also put on this part?
nika77
yeah ..... here's a dilemma then ....
it is best of course to try on this nozzle, but as I understand it, there is no such option ((((
I suggest looking at the drive axis in detail, and if all the "protrusions and overhangs" are the same with your axis, then, probably, the nozzle should fit ..
Bosch food processors and accessories
nika77
Oca
Tiksan, it is not entirely clear what is the question Which part to show? I see that you have 5540. So I also have 5540 and 5529, the nozzles between them have long been messed up. The only thing they write is that for a cube cutter in the 5540th model, you need a bowl "with ribs". Honestly, I have not yet seen a combine without four small ribs inside a large bowl.
nika77
yeah ..... here's a dilemma then ....
it is best of course to try on this nozzle, but as I understand it, there is no such option ((((
I suggest looking at the drive axis in detail, and if all the "protrusions and overhangs" are the same with your axis, then, probably, the nozzle should fit ..
Bosch food processors and accessories

nika77
Quote: Oca

Tiksan, it is not entirely clear what is the question Which part to show? I see that you have 5540. So I also have 5540 and 5529, the nozzles between them have long been messed up. The only thing they write is that for a cube cutter in the 5540th model, you need a bowl "with ribs". Honestly, I have not yet seen a combine without four small ribs inside a large bowl.
: girl_claping: Well, everything was resolved - the Wasp put everything on the shelves
Oca
I just removed part of the technique from the profile, so as not to frighten beginners. I'll put the harvester back in place now. If you want, you can buy a Bosch cube at a sale / flea market, it will come out at a price like additional attachments to 5540. I used to be stupid, I was afraid to take used or after repairs to buy, I wanted a new one ... but now I looked at the budget , on the prices, and decided that even after the renovation, it's good: everything that could break has already broken! After all, there is always a chance to run into shoals in new technology, and then you will also run into services to repair them under warranty ... So I bought two combines, an ice cream maker, a slow cooker, an airfryer for 30-50% of the cost - voila, they work!
Tiksan
Quote: Oca

Tiksan, it is not entirely clear what is the question Which part to show? I see that you have 5540. So I also have 5540 and 5529, the nozzles between them have long been messed up. The only thing they write is that for a cube cutter in the 5540th model, you need a bowl "with ribs".To be honest, I have not yet seen a combine without four small ribs inside a large bowl.

Nooo, I don't have 5540, I have MSM 68885. It's just that when I indicated the technique, my model was not there, and even now it is not.
Here I took a picture of my axes.
/ 663ddd4eb9e74792986848be425fba16]Bosch food processors and accessories
I have a suspicion that the MCM5 and MCM6 cube cutters are the same, just different colors. At least, they sit on the bowls exactly - I tried on in the store. But MCM 68885 had removable drive axles and were not on the showcase. So if my suspicion is correct and the wiping attachment is dressed the same way as a cube cutter, then most likely it will do))) Oh, did you write it clearly?

Eh, where to try on that?
Oca
Aah, I see. Yes, the cube cutter behaves in the same way as the wiping: scrolls on the top two steps. They even have the same diameters with rubbing:
Bosch food processors and accessories Bosch food processors and accessories
But why make an uneven inner surface on yellow plastic, it is only put on the central part of the bowl in one position:
Bosch food processors and accessories Bosch food processors and accessories
Tiksan
Yeah, so there is hope! Thank you for participating! I think it fits all the same. One of these days I will go to the Bosch service center, I will torment them there.
Rituslya
I came here to talk. No, not about all sorts of attachments. I don't need them.
It so happened that in the second attempt, one might say, the Bosch of Series 4 fell on my head.
A pot-bellied trifle!
Having a lot of things in stock, I can say with confidence that small Boshiki will provide you with real help
in the kitchen. A very good helper in terms of a small dough mixer and a beater mixer. True!
frauR
Quote: Tiksan

Yeah, so there is hope! Thank you for participating! I think it fits all the same. One of these days I will go to the Bosch service center, I will torment them there.
and as a result? Suitable?
Charline-MT
Dear wizards, please tell me what the kebbe attachment is for. I know about such hollow sausages, but I'm wondering if anything else can be done with it. Can I use for a test? If there are links to recipes - thank you very much)
Chef
Quote: Charline-MT
what is the kebbe attachment for
Kebbe attachment for meat grinder
Charline-MT
Chef, thanks, but it looks like that topic has died ... left a question in it too
bobule
I apologize: moved the message to another topic. Didn't find how to completely remove it from this thread.
Charline-MT
Hello everyone! I hasten to share information, maybe someone already knows, but I think many will be interested to know:
On our MUM 5, or rather on the meat grinder from it (the first digits of MFW15), a nozzle with an identification number on the Bosch website - 00496951 - is suitable for cooking sausages. The size is average, like sausages, but with proper dexterity, you can make thin nipples. I make in natural pork casing
Sashunesha
Good afternoon, finally I was going to ask, help me please figure it out - they gave me a Bosch MSM 5380/02 combine, I can't figure out which nozzle is in it for beating dough like a biscuit, a spinning whisk or the one that is a "propeller"?
Cacktus
Sashuneshawhichever is more convenient for you, the whisk exactly whips, the propeller basically mixes.
Sashunesha
I have not tried any yet, I'm only going to portray the Chuchelkin cake. I used to have a blender, complete with whisks. Changed to a combine, there are no instructions, he still has two lids for the bowl for some reason ...
Tiksan
Quote: frauR

and as a result? Suitable?
Oh, two years later I only saw the question.
Yes, berry wiper fits MSM68885




All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers