Sausage syringe

[Stavr]

StavrWe mainly buy on Ali, with free fast shipping 10-14 days.

There, horizontal suction cups such as biovines are from $ 27.46 to $ 47.41 (0.5 kg, 1 kg, 1.5 kg, 2.5 kg, if syringes are used to measure in liters, then the figure must be multiplied by 2). There is the same type 2.5kg. but made of stainless steel and besides the suction cup also on a clamp to the table, to choose from.

There are also vertical ones, likegalchonok, 2.5 kg aluminum and 2.5 kg stainless steel for $ 76 and 79, respectively. There are 3 kg. such a format.

And there is also a horizontal big one for 131.

But these are the prices of today. There periodically promotions, discounts, there are seller coupons. That is, if you wait for the moment, to pry, you can take it much cheaper. I here with a seller's coupon and Ali's coupon and a discount for a mobile application sooo cheap bought my own, somewhere for 1100 + - rubles.

Added Monday 04 Jul 2016 11:48 pm

It is convenient to wash. Washed in the bathroom. He understands almost everything.

That is, it is still difficult to slip it under the sink? Need a bathroom?

I am most confused about washing in this format. Well, to stand in the closet. There is also a clamp like chicken legs, probably it is necessary to prop it up.

Although all these are trifles, if the thing is cool!

[Miranda]

Miranda, I have a mixer in the sink high + on a flexible hose, but it didn't fit, so the soap in the bath was convenient for me to wash.

and vertical is difficult to put so as not to fall?

I lowered the plunger all the way down, took off the handle, turned the syringe over and put it with a clamp up in the corner of the cabinet - it's great, it doesn't lean on anything, it's very convenient! I took a photo from both sides - it just stands on the floor and does not lean on anything and does not fall, so it stands wonderfully in the corner of the cabinet and does not interfere!

A sausage syringe after a meat grinder seems like a miracle

, I agree to all 1000% - the stuffing goes quickly, like clockwork, and no air and torment for you because of this!

[galchonok]

galchonok, cool how it stands, twist like a handle, can be carried

[galchonok]

galchonok, can I also link to the seller?

[Miranda]

Miranda, that's exactly how I wear it, like a pen
Svetlana, the link was sent to the LAN.
By the way, the price there today is 180 rubles. less compared to yesterday, only there is still no coupon

[galchonok]

galchonok, congratulations on the purchase you need!
If possible, then me too, please discard the link to the seller.

[Marina.]

Marina., Thank you ! I threw the link

[Check mark]

Check mark, I already ordered it. Through the mobile application it cost 4,940 plus 7% cashback. Thanks again!

[Anya]

Anya, Congratulations ! And I forgot to say about cashback, I have it too (as much as 334 r). So the syringe cost me less than 4500r

[galchonok]

galchonok, I, too, "kolbashes" for about a month, my husband gave a vertical "HAKKA", bought in the EK. At 3 liters, I'm also happy like an elephant, and most importantly, my husband fell in love with him tenderly and tremblingly, now I have two fun in a day: bread and sausages. I am mastering cervelates
Congratulations little dag on the new thing !!!!! I know from myself how much emotion it is, it's like a car after a bike!

Mine in the PMM, I push the rest of the minced meat from the flask into the casing with a bag through the stump, removing the flask. In general, not difficult.
And most importantly, the filling process takes minutes (there is something to compare with).

I built mine for storage on the balcony, in a locker, we fry Ukrainian sausages on the grill in the same place, I also asked my husband for a computer universe (Feuerdesign Mayon anthrazit mit Grillzange), in general, the topic was delayed not like a child



Sourdough bread (white and rye) is also mine

Girls, how happy I am for all of you! Let's share the recipes!

Added on Tuesday 05 Jul 2016 04:39 PM

I also bought a syringe the same from a sausage, for 3 liters, it does not cost. But under the clamp you need a small piece of rubber to ride a little.I wanted biovin for 3, liters, no one on the forum had, they unsubscribed. The price for biovines has risen. I bought it cheaper from Kolbaskin. One of these days I will do sausages. It is convenient to wash. Washed in the bathroom. He understands almost everything.

I also looked at this syringe, I liked it, but I thought that it would not be convenient to wash in the shower, and my husband relaxed in the store near Kolbaskin, watching his "sausage" videos, so I talked him to Hakku.
Now a new sadness - I want a smoke generator ...

[Larissa]

Larissa, beautiful photos)
Yeah, the topic is addictive ...

[Larisa, Lorik]

Larisa, Lorik, thanks for the congratulations! And I congratulate you on such a necessary and thorough purchase! I am very glad that you and your husband decided to buy! Yes, this business is so addictive! I there (in a personal) told you what you wanted

[galchonok]

galchonokthank you
I first dragged my husband to the "Pie Dvorik" on Razyezzhaya, fed him, he relaxed in the store on the sofa in front of the TV (his favorite home position) - "and do with him what you want"

[Miranda]

Miranda, I bought a 2.5-liter vertical 4900r.

[Check mark]

Check mark, Konstantin, and fastening a vertical clamp is convenient?
I, too, tend to vertical for some reason .. it seems like a natural movement of minced meat from top to bottom into the belly ...

[katko]

katko, Conveniently, just if the minced meat is cut for sausages, but in the horizontal it can vytikat. Therefore, I decided to be vertical just in case.

cut for sausages

went to google)))
I haven’t dreamed of sausages yet))) while I’m only looking at the simplest sausages

[Katyusha]

Is it convenient to mount a vertical clamp?

Katyusha, yes, very convenient! Manual meat grinder principle

Added Wednesday, 06 Jul 2016, 05:40 PM

I haven't dreamed of selling sausages yet)

And just today we were in the EK store and bought everything for dry cured meat and sausages

I am grateful to the author of the topic for opening the topic and a link to the budget syringe. Like many, for 10k, well, I did not dare to buy, but then why not.
I ordered a syringe, in parallel on it ... ki everything you need for sausages)) I took a small syringe, 1 kg. At first I tested the ham, the flight was normal, but there were large pieces, so I didn't really feel the advantage over the meat grinder. But when the sausages came into play ... yes! Thing! True, part of the minced meat was leaking out, the package did not help, but I did not guess about the napkin)) now I will know) In general, who else is thinking about buying - do not think - buy !!!

In finished form

I took a small syringe, 1 kg.

Can I have a link? Vertical or horizontal? Also considering the smallest.

[Anna]

I ordered a syringe, in parallel on it ... ki everything you need for sausages)) I took a small syringe, 1 kg

I also ordered one, now I will wait)
By the summer-summer season, he probably won't have time to come to grill sausages on the grill, well, nothing
Anna, there is a link on the first page.

[milka80]

milka80, Irina, please write a recipe for sausages

[milka80]

milka80what beautiful
Glad you liked the syringe.

I think that those who do not dare to buy an expensive syringe for 10 + - thousand can easily afford an inexpensive one for 1800-1900 rubles. And on it to understand how often it is used, what volumes. It may so happen that it will be enough. Or, on the contrary, make sure that you need a big and solid one.

What's your recipe? No nitrite salt? How was the blank prepared?

Bargained with the seller for the missing cookie attachment for 200r. She opened a dispute and he immediately accepted it.

[galchonok]

galchonok, How are you? Gal, I recently went to Aliexpress to see what's there, what prices and saw a syringe like yours, just a slightly updated model. There, a metal piston in a silicone edging can even be removed from the piston to wash like a Hakka. And the flask itself at the end is made differently. Smooth bottom with a hole on the side for the passage of the minced meat into the tarsus. It seems to me that there will be more minced meat in the pipe than in yours.Please look at this model and tell me your opinion. Price for this model 5882-82 with used delivery.

[velli]

velli, and you still have the link? or is it the same store?

Miranda, the link has not survived. I just went to: Buy a sausage syringe at Aliexpress. There I found such a syringe.

[velli]

velli, Valya, now I went to Ali, I saw there only a syringe, which was 5863r, now 5200, but delivery to it is 4409r - are you talking about him or is there a specific link? Throw in, please.

How are you?

Well, we bought all sorts of sausage bells and whistles - we will try to make cervelat, dry-cured sausage and sausages, only I'll wait for the jewelry scales with Ali, they should just get it, without them we can't weigh the "starts". Valyush, with me, pliz, on "you"

[galchonok]

galchonok, Checkmark, and can I explain for the "especially gifted", hu from "starts"?

[Marina.]

Marina., these are starter cultures that are needed in the manufacture of dry-cured sausages

[Check mark]

Check mark, got it. Thanks for the clarification. I don't even dream about dry-cured ones.

[Anna1957]

Anna1957, the syringe is horizontal, there really are links on the first page))
kirch, Miranda, recipe with it ... ki, "baby sausages". Instead of beef and pork, I took a turkey. With cinnamon, you need to be careful, according to the comments on the recipe, I reduced its amount, but still the taste was interesting. This is far from a store-bought taste, but my family got the sausages quickly. I didn’t cook any more of these, but my mother and I "disassembled" the recipe and decided that for greater juiciness either you need more cream or add pork.

[galchonok]

galchonok, You are writing about some incomprehensible unit! I'm talking about someone like yours, on a clamp, only an updated model! And these syringes have both plastic and metal stems. With metal it is much more expensive. On Ali there are many subforums on which I found I do not remember. I put in the basket like yours an updated model with a metal piston and a silicone gasket along the edge. There, the bottom of the flask is made differently, not like yours. That's all I think about which one to redeem, which one is more convenient, in which mince meat remains less in the pipe and tarsus. Or order Biovin for 2.5L vertical now advertising on them goes for 4.490 offer! But why are they selling them so cheaply? there is something alarming about this action.galchonok, look again at Ali on this syringe. A site like: Meat. Sausage. Syringe. China There are Chinese people, we still need to understand them!

I put in the basket like yours an updated model with a metal piston and a silicone gasket along the edge.

If you put it in the basket, then you can get the link from it. And then, however, it is not clear which model you mean. What is its renewal?
***

Instead of beef with pork, I took a turkey.

I often add chicken. There is not always the right beef in the house. And with chicken is more tender. But I am the fatty part of the chicken for juiciness - legs, fat. I know that many people twist the skin, it’s the fat, but I don’t.

I looked at cinnamon in some video, began to add, I like it.

If the type is dairy or baby, then milk is required. I can freeze it in ice. If the pork is not fat, then the cream.

[Miranda]

Valya, looked again, like I found it a little more expensive, but found no difference in it. As he writes,Miranda, in the basket you can click on the product and then at the top, where is the address, this will be the link. I would like to go and see on it, otherwise I do not find

girls and me to you. the courier brought a message from China. ordered from the same seller as Miranda. and grabbed a mold for dumplings, I've been looking at it for a long time, the price is bite. but decided, it is perfect for the dough sheeter.

[Ljna]

Ljna, Evgeniya, CLASS !!!

and grabbed a mold for dumplings, I've been looking at it for a long time, the price is bite. but decided, it is perfect for the dough sheeter.

Please give a tip on what to enter in the search engine in Ali ... How can I find this form? I need it urgently. I didn't even think that the Chinese have already released such a necessary mold.

[Svetlenki]

Svetlenkiif I understood correctly, and Ljna bought from the same seller that sells syringes, then here are all its forms

🔗

And so you can type the word Ravioli in a search engine and it will give out a variety of forms, although a lot of unnecessary ones, but if you write other words, it is even more difficult, because these forms are either molding, then the press, you will understand them. But the word Ravioli is definitely there.

Added Wednesday 13 Jul 2016 11:35 pm

Only his forms are expensive, more than 1 thousand rubles. turns out. You can then look at Teskomovskie

[Svetlenki]

Svetlenki, Sveta, link below

Added Wednesday 13 Jul 2016 11:45 PM

expensive forms, more than 1 thousand rubles. turns out. You can then look at Teskomovskie

I agree, dear ones. didn’t know what teskoma had

There is a topic about all kinds of forms for dumplings, dumplings. There, and new items flicker, and then after a while reports, although not always. But the question will be answered.

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=18833.1600

Yesterday they brought me a syringe. How cool he is! I bought from the same seller as galchonok. Arrived so quickly, in just a week. Plastic trowels are excellent. At first I wanted to buy additional metal ones, but it's good that I didn't.

[Anya]

Anya, Congratulations ! Let it serve and please for a long time!

Plastic trowels are excellent. At first I wanted to buy additional metal ones, but it's good that I didn't.

And at first I also doubted, but in vain, the tarsus are of high quality!

[Anya]

Anya, Check mark, thank you, reassured about the quality of the tarsus

[notglass]

notglass, congratulations on your good purchase! Let it please

and I ordered on July 10, it is written on the way, I also wait very much

[galchonok]

galchonok, Check mark hello! I wanted to ask you about installing strings in the tube of the flask. Are they securely fixed, and do they fall out during operation, because judging by the photo there is no fastening washer. Minced meat does not go through the cracks?

[Valentine]

Valentine, Hi ! The stubs are attached securely - they are inserted into the outlet and turn, in my opinion, counterclockwise (I don't remember). The strings and in the outlet have a thread (and there are really no washers!) - this is how they join and fasten - everything is very securely fixed and nothing moves when the gut is stuffed, and therefore the minced meat does not pass out of the cracks

[Check mark]

Check mark, Checkmark, thank you so much for the quick response! You not only reassured me, but also saved me from unnecessary overpayment of money for a syringe like yours, only there are metal tippers and there are 4 of them. For 3 liters of minced meat with a new piston. It costs 7.639-05 delivery!

Valyusha, not at all! And the stingray and I have 4 pieces

And they brought me a syringe today, it came in 10 days
I have not yet had time to buy a womb and study the recipes.
And no one filmed the video, what's what, for dummies?)))