Multicooker Dex DMC 65 (reviews)

My husband bought ... And at that time, in active searches, I ran all over the city ... Well, I did not find analogues of this model (value for money) and those programs that I need. There are many copies, but everything is not right ... then there is no manual mode, then the quality is not right, then the price is several orders of magnitude higher ...
Trust in DEKH has won ...
I also wanted 60 ... But he is nowhere to be found ... In Internet stores, too ...
Then I decided to take a break, "fold my legs" and after the New Year look for a cartoon.
Suddenly, instead of one fancy multicooker, I got 2 cool appliances (my husband was generous ... he kept asking me what I needed in secret and riddles.)
I was deeply happy from such gifts

In a discussion on Rozetka, on January 3, they raised the question point-blank about buckwheat - they turned directly to Rozetka with a request to explain the situation - as a result, this message simply disappeared (and my comment on it too). And the comment was Dex-a's answer. Of course - if everyone rushes to change multi - you will not run out of losses. I am not so worried about this buggy mode as the fact that all this multi-touch mode has 2 - of which one (50%!) Is not working. This means that in the event of a breakdown of the remaining one, the cartoon will remain without a touch mode at all. And then it will become a very noticeable disadvantage. I wonder if Dex told the manufacturer or not?
Sparta - what is your second best device?

Pressure cooker polaris 0305

[sparta]

I am not so worried about this buggy mode as the fact that all this multi-touch mode has 2 - of which one (50%!) Is not working. This means that in the event of a breakdown of the remaining one, the cartoon will remain without a touch mode at all. And then it will become a very noticeable disadvantage.

This multi has huge advantage - the ratio "opportunity-price" !!!
Grits-crumbling is cooked on "rice", grits-porridge-mash - on "stewing" ...
But what a "frying" amazing, and even "manual" at 30 degrees - generally super
It was these 30 degrees that personally seduced me into this model ... I use Deksik every day, I even put my favorite Panasik aside, it looks like I’ll leave it only for baking biscuits and in case of special rush jobs ...
Different multi passes through my hands, but did not linger. Now only an old Panas, brand 6060 and now Deksik ... Very pleased with the set !!!!

sparta
Congratulations on your new technique !!! Let it only please !!!!

Elena, what are you cooking at 30 degrees?

In this mode ideally yeast dough is suitable for pies, cheesecakes, bread ... I like it this way more than in the oven. The dough does not wind up, it warms up evenly, the yeast works well ... I especially noticed the difference on sourdough bread ... Try it - you won't regret it!

Pilaf cooking almost ended in failure.
After stewing, I started the rice mode - and nothing, that is, despite the running square and the burning light bulb, the program did not work. And yes, I am sure that I ran the program correctly and it started. After waiting an hour, I reset the program and started it again, after which the water finally boiled. Hike after starting the program, you still need to listen to the multicooker - is it bubbling there or not

[Jambat]

Jambat
Try to wait 5 minutes after frying for the ten to cool down

Uh, or even there was no frying mode.

No difference.
I had the same, in connection with which I can sympathize with you and advise you to make a return. No, try to find an approach to it after all ... many advise to wait a little time before cooling the brain.
shl. the new one has not yet been tested in this regard.

Yeah, I remember your epic.
Will it work like this every time or periodically? Just in the stewing mode the temperature is 100, and in the rice mode -105, there is nowhere to cool.

Good day to all! There was a question - the "Rice" program did not work. I made pilaf, stewed meat and vegetables, poured rice, added water, set the "Rice" program and .... silence ..... the display shows the "Rice" program, the dotted window blinks without time, more than 3 hours have passed and no movement. What could be the problem? maybe someone came across this? Thank you.

I saw a similar problem above, tomorrow I'll just try to cook rice, although it's not entirely clear how to make pilaf then, wait for a while after stewing?

Good day to all! There was a question - the "Rice" program did not work. I made pilaf, stewed meat and vegetables, poured rice, added water, set the "Rice" program and .... silence ..... the display shows the "Rice" program, the dotted window blinks without time, more than 3 hours have passed and no movement. What could be the problem? maybe someone came across this? Thank you.

Wow, the law of paired cases is straightforward
Hello colleague in misfortune.
It seems that there is no problem with the rice program if you turn on a cold multicooker. There is a problem if you include this program after another.

Wow, the law of paired cases is straightforward
Hello colleague in misfortune.
It seems that there is no problem with the rice program if you turn on a cold multicooker. There is a problem if you include this program after another.

Well, the campaign needs to adapt to the cartoon, although I tried to cook according to the recipe book, at least for a start, so as not to mess up ..

And after extinguishing the cartoon, it goes into heating mode. Do you turn it off before the rice?

yes, I turned it off, then fell asleep rice, but the "Rice" program did not work. As a result, the pilaf was cooked on stewing.

And after extinguishing the cartoon, it goes into heating mode. Do you turn it off before the rice?

In the heating mode, you cannot select the rice mode, like any other. Hence yes

Well, this is some kind of torment. I think - you need to take it. And to everyone who has glitches. Then maybe Dex will nevertheless inform the manufacturer and you see, in half a year the problem will be fixed.

By itself, the "Rice" program works for me, especially now I cook a glass of rice for the dog boils, you can hear what it is cooking, of course it is not convenient to pause between programs, maybe this is a temporary phenomenon?

Well, this is some kind of torment. I think - you need to take it. And to everyone who has glitches. Then maybe Dex will nevertheless inform the manufacturer and you see, in half a year the problem will be fixed.

Yes, the feeling of ownership is not very pleasant. I am sure that in future parties all these jambs will be corrected and can be exchanged for a cartoon without glitches, after all, the warranty is two years.
Since two weeks for a refund have already passed, I see no reason to make an exchange for exactly the same buggy one.

[sparta]

I already wrote about my Dexik earlier

sparta
I cooked a roast. I will describe it step by step.
1. "Frying" - I fry the meat. It fries itself, I peel the onion and cut it.
2. "frying" - stir the meat to almost perfect frying, add onions, fry until the onions are ready, stirring more often. At the same time I peel potatoes, cut them. If the onion is not fried, but the program is over, I re-set the "frying". Habit from Panasik. There frying works for 20 minutes on the machine.
3. I put potatoes in the cartoon, add water, put salt, spices ... I turn off the "frying" program with the "cancel" button. I turn on the "extinguishing" program.
4. On a signal, I check for readiness ....
I kept it on heating for 20 minutes - I was waiting for my husband ...
Everything is fine, tasty and not troublesome.

Any program can be disabled by "canceling" and enable the desired one at a given moment.
By the way, the dex buttons are harder to press than the panas buttons. Maybe you are still underestimating ???
On the "rice" program, of course, you cannot open the cartoon (steam will come out and there may not be enough water, the rice will be damp), but there is no need to wait 3 hours. After 3-4 minutes, look into a saucepan - it boils, does not boil, especially if there is not enough experience with toons.After all, you can rush in time, restart ...
Although, everything is just right for me! And at the neighbor's ... And at the relatives!
And I do not pause between "frying" and "stewing", "frying" and "rice". Everything turns on, everything works, it doesn't even fog up, like in the 60s

Well no! If the programs do not turn on, it is necessary to take and exchange ...
I say, I took 3 at once and all are normal, without glitches (except for "buckwheat" - but we will consider it a multi feature) !!!

I have already written about my deksikAny program can be disabled by "cancel" and enable the desired one at the moment.
By the way, the dex buttons are harder to press than the panas buttons. Maybe you are still underestimating ???
On the "rice" program, of course, you cannot open the cartoon (steam will come out and there may not be enough water, the rice will be damp), but there is no need to wait 3 hours. After 3-4 minutes, look into a saucepan - it boils, does not boil, especially if there is not enough experience with toons. After all, you can rush in time, restart ...

There is really little experience, I think that the buttons were pressing, because the menu for selecting a program was highlighted on the display, do you suggest to cancel the program next time, open and check, or can you look without canceling the program?

Since two weeks for a refund have already passed, I see no reason to make an exchange for exactly the same buggy one.

It doesn't matter if 2 weeks have passed or not ... you can turn it in at any time if it's buggy. The delivery procedure was described earlier, if you are interested, rewind, read ... 2 weeks is for a technique that was completely unused (there is no smell from the saucepan, everything is in perfect, unused condition). If the cartoon has been used at least once, a period of 2 weeks will not help. But with such glitches, the cartoon must be taken away ... And I wrote to the dex. Someone else write, post here what they will advise you ... And I try to fry - mushrooms, and then on pilaf mode.

There is really little experience, I think that the buttons were pressing, because the menu for selecting a program was highlighted on the display, do you suggest to cancel the program next time, open and check, or can you look without canceling the program?

Irina, won't help. I even got to the point that a click was heard to turn on the program - and the result is 0

Do you suggest canceling the program next time, open and check, or can you drop by without canceling the program?

you can drop in without canceling the program

I didn't wait for the next pilaf to be checked.
He poured water, turned on the frying for five minutes. Then I turned on rice. The water in the pot has stopped boiling. Disabled - enabled, nothing. Two minutes later, again, again nothing. Five minutes later, once again, the water finally began to boil again.

Can I insert 5 kopecks of mine? If I were you, I would not suffer, I would exchange it and that's it! Moreover, there are normal Dex 65. The Dex company gives such a guarantee, use it (guarantee), and do not suffer !!! Where did you buy it? If the seller does not want to change, write to the official Dex website, they will immediately help. I bought a Dex bread maker, the touch buttons did not work correctly, I bought it in the Dex line online store. They began to say that they would look at it in the service, repair it, and I demanded a new one. In short, two sides argued: the store and me. But after my letter to the official Dex office and his intervention, they sent me a new bakery and I didn't even pay for the delivery, the store paid for it.
🔗
🔗

Good day everyone! checked the delay start and "buckwheat", the timer was set at 9-00, the "buckwheat" program started working at 8-15 and at 8-30 it was already over, the buckwheat was ready. Question - is buckwheat buggy? why was the timer at 9, but got ready at 8-30 and switched to heating mode? Thank you.

Good day! Apparently because the normal buckwheat mode should work for 40-45 minutes and the timer knows about it.
Therefore, it is included in 8-15. But since he really cooks for only 15 minutes, that's what it turns out.

Well, after all, by the time the buckwheat was cooked? And it boiled all this time, languished or simply warmed up - it doesn't really matter when you cook with a delay ...That's when "it is necessary here and now" - you have to bear in mind and give another 15 minutes for heating - everything is fine. Well, or extinguishing ...

[Alisa-Topol]

Dex 65 clearly has problems with the Buckwheat program
And I don't quite agree with Alisa-Topol - well, it's cooked? - yes, it was not cooked, but it was heated up, so to speak - and if you cook not buckwheat on this program, but other cereals (after all, the name of this automatic mode does not oblige the user to cook buckwheat on this program, you can cook millet, say). And take into account all the time in your mind these 15 minutes of heating, on which the cereal comes after such a shortened cooking - sorry, but where is the convenience from using cartoons, then it is easier on the stove.
After all, the beauty of the automatic program is that it runs before the liquid has evaporated (that is, the time of this program depends on the amount of liquid - the more, the longer the program runs).
In Dex 65 it turns out how much liquid you do not pour - the program runs for the longest 15 minutes. This is a clear cant.

We have already given information (this is from the instructions for Dex60, but it will also be for Dex 65) that Grechka Ave. - T up to 110C and the time is approximately 40-50 minutes. !!!!!!! (but I will repeat it again, approximate !!!!), and etc. Rice T up to 105C and an approximate time of 35-45 minutes. As you can see, Buckwheat is even a longer program than Rice, and hotter. So tell me how Buckwheat can be cooked in 15 minutes. maximum. And bringing it to readiness on heating is just a way to bypass the incorrect operation of the program, this is already a trick. It shouldn't be like that.

I am in Dex 60 on Buckwheat (and on Rice, since both programs are until the liquid has completely evaporated) and I cook Beyron potatoes - the program sometimes works for 45 minutes (as I put in fewer ingredients), sometimes it happened for 1 hour (like a bookmark to the maximum) ... And there is never any liquid left in the saucepan and nothing has to be evaporated by heating.
Just imagine - the program runs for 15 minutes. and in a saucepan, as a result, half-baked potatoes in liquid. Is it possible then to say that everything is fine and on Heating will come. Unlikely!

Therefore, those who believe that in DEX 65 it was conceived by the manufacturer and that this is not a jamb are either mistaken, or just soothe themselves.
And here I personally see 2 ways out - either to accept it and (do not complain accordingly, because there is nothing to help here), or to hand over the multicooker. I would choose the latter - after all, the money has been paid, and the device does not work quite correctly.

All of the above is my vision of this problem as a happy user with a two-year experience of multi Dex 60. If anyone listens to me, that's good.

Happy Holidays everyone!
I want to give it to mom. On sale dex 65 and in the metro saw one piece 60. The price is almost identical. Advise who used both, what to choose? Thank you in advance.

I only use one, my 60th. If I were you, having read a few pages of this topic, I would not take the 65th. And then see for yourself. Well, that's the kind of person I am. If I find at least one review not good, then I immediately change my mind about buying

I only use one, my 60th. If I were you, having read a few pages of this topic, I would not take the 65th. And then see for yourself. Well, that's the kind of person I am. If I find at least one review not good, then I immediately change my mind about buying

60s is no longer on sale and in the metro there is only one piece from the showcase, as they say, the gift look is lost
I correctly understood that for 65 the main problem is a bug of the buckwheat program and touch buttons on?

[Michael]

Michael, yes, you understood correctly - the Buckwheat program glitch and the Rice program are in question. Well, the touch buttons are neither a minus nor a plus.

But do not be lazy, read the topic - there are not many pages, take time to read and form your opinion.

[in my 3 65 dex]

Dex 65 clearly has problems with the Buckwheat program
All of the above is my vision of this problem as a happy user with a two-year experience of multi Dex 60. If anyone listens to me, that's good.

Well, about "buckwheat" and I immediately wrote as soon as it became clear ... It's not worth attacking like that ...
And I am a "happy user with seven year old experienced multi panas "I can say - everyone has their own shortcomings. You need to know about them in advance ... For me the program "buckwheat" (I will repeat myself once again) is not critical .... And at 60 dex to me lacks 30 degrees, which is 65. Touch buttons in my 3 65 dex work great ("product selection" and "temperature") !!!! The "rice" program too !!! Tugovato (in comparison with Panas, Polaris, Redmond - personally pressed) the buttons "start" and "cooking time" work. On the rice program immediately after frying without cooling down (as in 60 dex the owners advised) govila and potatoes, and pilaf, and crumbling cereals for a side dish ...
The "yoghurt" works perfectly - it does not overheat, exactly 40 degrees ... But 60 dex is a sin. Yes, not all 60s overheat, but there are some !!! And what, people refused? Or resigned?
And the fogging of the screen in the 60th dex when steaming?
These are also reviews from the branch about the 60th dex ... And also no one refused from multi because of this. A for me fogging, overheating of yogurt and even the absence of a 30-degree regime are serious disadvantages, much more serious than under-boiling buckwheat ... But this for me... And we select multi for yourself and we put up with something, we struggle with something ...
By the way, biyron potatoes are cooked in Panas on the "pilaf" mode, which means in dex on the "rice" program, which is for me basic and important ...

And the fogging of the screen in the 60th dex when steaming?

There is no fogging of the screen when cooking with steam, but the disappearance of some Menu names (the word Baking disappears from me) when heated. When it cools, it appears again.

And I have nothing fogging up in the 60th (only windows if something is being prepared on the timer and everyone is asleep), but buckwheat, if the water is 1 to 2 m, it can fry slightly, it means it overheats. Likewise, pilaf and roast. I don’t fry anything beforehand. I put everything that needs to be fried on the bottom, on top of rice or potatoes. Very cool French potatoes are obtained on baked goods. And about the touch buttons, I read (since I ran into this in a bread maker) that the retention rate is from 3 x to 5 seconds

Well! Problem again? I don't have 3-5 seconds, my touch buttons turn on right away. It's another thing to remember where are sensory and where are ordinary
Nothing disappears from my screen, neither when frying, nor when cooking of any duration ...
And to be honest, after Panas I just get stuck with frying !!!!! That's what I really missed !!!!!

Girls, do not fight, anyway, objectively compare these two models and only a person who has used both of these models can draw the same objective conclusions, but not one day. In general, it will be possible to judge about 65 only after a year of work, as well as about 60 at first it was difficult to evaluate anything until time passed.

Well, about "buckwheat" and I immediately wrote as soon as it became clear ... It's not worth attacking like that ...

peace-friendship-chewing gum
God forbid, no attacks, honestly I just expressed my opinion

PS when steaming my Dex 60 everything is OK But I want to add - the problem with the Steam in the Dex 60 was much less common than with Buckwheat in the Dex 65 (and I repeat - these are not attacks at all) And I am very sorry that Dex to some extent worsened the quality of its products, because I myself use a cartoon, a blender and a Dex yogurt maker and this fact is unpleasant to me
But I agree - 30C and I would not be disturbed

Thank you very much for your answers, probably the most active forum I've seen
It is clear that all MVs have pros and cons to which you can get used to. To be honest, I thought that the difference is only external in design, but in fact the devices differ quite seriously.
Again, I am taking it for a person of age, for whom simplicity and predictability of results should be in the first place. Otherwise, the gift will end up in the pantry and cooking will continue on the stove.

Right! I once suggested buying a Yummi-505 as a gift for an elderly woman (when the Dex-60 was out of stock). For the price it was like Dex.Then there turned out to be so many jambs that they wore it for repairs three times and as a result, the daughter who gave it, took this device for herself and bought her mother a Dex-60 (fortunately in October it had just appeared). Now MV works daily and the hostess is happy. And Yummi is still idle, one frustration. And it is impossible to hand over, only they are repairing, but there is no sense (the temperatures are too high there), the fee is changed, but the same is laid down there as in the previous ones.

[Alisa-Topol]

Girls, this is probably a batch of buggy dex released.
Perhaps, at the beginning, when this model was released, high-quality sensors were installed ... then a promotion appeared, the demand for the model increased and something was replaced there at release (in order to reduce the cost of the multi).
In general, I have the same bullshit,Like the "late" owners of the DEX-65, the same glitches are repeated as they were. The day before yesterday I thought that it seemed ... today it was confirmed that it did not seem ... After stewing or frying, the pilaf program does not turn on, we have already discussed buckwheat ... in general, this cartoon plugs in, like the previous one. But!!! Agree with Lena Alisa-Topolthat the cartoon is generally good. During the exchange, the possible purchase of a new multi, I considered a lot of models. For such a price, such quality, I did not find anything (perhaps a habit). And now I don't even have a doubt- horseradish with touch programs, if you remove the buckwheat rice, the cartoon won't get any worse, and the set of functions is good. I will not do any more gestures, as one of the girls wrote below ... I "forget" about these problems and enjoy morning cereals, cooking, hot and favorite pastries (chocolate on boiling water - "bomb")!
But the most basic (thanks a lot Jambat),: hi: for his part, he helped me in the experiments ... it seems that we found a reason for not turning on the "rice" program after frying or stewing.
Probably, there is something overheating and it takes time for the brain to cool down and the program turns on.
That is, if you wait a few minutes after frying the meat, then the rice turns on without problems.
Whoever has glitches (except for buckwheat, buckwheat does not count), try this "experience" with water.
Simulated cooking pilaf. We poured half a liter of water into the cartoon, put it on frying (for 3 minutes). The water began to practically boil, the program stopped, another half liter of water was added (we tried the temperature with our hand - the water is hot, but not scalding). We put it on extinguishing for a little - about 3 minutes, the water practically began to boil. Then they added another 2 liters of water - they mixed the water in a saucepan, again, the water turned out to be hot, but not scalding. We put water on rice. Slowly but surely, bubbles began to appear at the bottom of the pan, which means it works! After 10 minutes, the water became much hotter than it was after adding 2 liters of water. If anyone tries this experience and everything works out, please unsubscribe ...

If anyone tries this experience and everything works out, please unsubscribe

As a beginner multiuser, I tried this method twice. The first time the rice program worked right after stewing without any problems - and I was glad that everything was fine with my "mulychka". On the next day, having cooked soup on the "stewing" program for the sake of sports interest, I switched on "rice" - no movement, silence .... let it cool for a few minutes - no result - the rice program did not work again. The next day I repeated the experiments with water - after stewing, the rice does not turn on. Although separately, this program works fine. I am still confused - to exchange or cook pilaf on a stew while enjoying other programs ...

[sparta]

With a fright, in 2 cartoons (my own and my neighbor's), I checked the programs almost like sparta advised - the flight is normal, another one with relatives - they called and called back to each other, according to their reviews - everything is fine, except, of course, "buckwheat" - well, let's count this - a feature of dex 65 !!! (and they think so - they are not spoiled, 1st cartoon). My cartoons were checked almost immediately after the purchase, as soon as negative reviews went ... Checking with thermometers, a stopwatch, a timer ... Well, we got into an "almost perfect" series, apparently ...
Advise I to anyone this cartoon? And yet YES !!!! Of course, if you have money - take the latter's panasik - everyone knows the same, but the difference is significant in money. But if "why pay more" - dex 65 will help you !!!

All the same, starting rice after the previous program depends on the temperature. He poured more than half of a saucepan with cold water, started frying for five minutes, the water warmed up, but did not boil. After the end of frying, I immediately started the rice - the program started working and the water boiled. I drained the water, poured some cold water and in the frying mode it boiled, then turned on the rice again - and nothing worked.

Something, but the cakes-pies in this cartoon are perfect!
Made a chocolate on boiling water cake https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=12826.0
Everything is according to the recipe, in our multi-mode "baking", the baking time is 1 hour 20 minutes, then it stood on heating for about 10 minutes. I make the second time, the cake is easy to make, the biscuit turns out to be very high, loose ... Immediately cake I divided it into 2 parts, one will remain for us, the second will go to visit. I will show you in the context later.
Merry Christmas to you!

Hello! Take into the ranks of the owners of Dex 65. I really like everything about it (pah pah pah). I even liked buckwheat. Buckwheat was cooked in buckwheat mode and plus on the advice that I read in our forum, I kept it on heating for a couple of minutes. Of course, it turned out not boiled, but not completely cooked raw, full-fledged porridge. Therefore, choosing a slow cooker again, I would choose only her !!!

[Kseniya 77]

Kseniya 77, welcome!
Do you have a problem with turning on "rice" right after "frying"? Do not need to give 2-3 minutes for cooling? And then we had whole battles here
Well, if only your deksik pleases you !!!!