Multicooker Stadler Form Chef One SFC.909

I was confused by someone's statement (I don't want to climb to look for) that 8t. R. a little expensive for 11 programs.

I wrote about 11 programs, and since I was one of the first to buy it and bought a 4-liter one for 4990 rubles, of course I think that 8tr is a little expensive ... On what basis did they raise the price by two thousand? ... Although I looked at their website , Stadler has all expensive, designer equipment ...

Irin, it seems to me that at first they attract buyers at a low price, and then, as people swell that the thing is good, they start buying it. And as sales have gone, prices can be raised. And thanks to Temka (which you opened), we write good reviews. Free advertising is on. Respect and respect to you

Hello! And I baked a cake again, now I don't even want to bake in the oven, it's so good. I found a minus in the multicooker: now I forget to turn off the stove, it does not beep. Interestingly, when and where the bowls can be bought?

In big cities, you can come with a bowl to the store where all the cartoons are and compare them with our bowl.
you can't do this in small towns, we don't even have multicooker in stores.

Interestingly, when and where the bowls can be bought?

The representative of the company Nadezhda assured us that the bowls for our multicooker, when it is not known, should go on sale. And since our bowl is sooo different from the bowls of other mv, we can hardly replace it with a non-native one, especially me, since I have a 4-liter saucepan. Although it is possible a brand pot (5 liters) may work (they are on sale), but this needs to be checked only empirically (that is, by typing)

I found a minus in the multicooker: now I forget to turn off the stove, it does not beep.

Yeah, I was baking in the oven here, too, I got nervous all the while I was running, checking, looking in, I’ll turn down the gas, then I’ll add ... Multi spoiled me very much ...

Today I made a chicken liver SOUFLLE. It got very tasty and tender.

400g chicken liver, 3 medium carrots, 3 onions mince. Beat two eggs with salt and add to the liver, mix. Then pour in 100 ml of cream, salt and pepper. Add 5 tbsp of flour and mix the olives. Put the mixture in a greased multicooker bowl and turn on the Baking mode for 50 minutes.

Hello everyone. For three days now I have been studying different models of MV (I broke my head, honestly). Immediately stumbled upon your topic. I liked this MV very much. As we study, questions arise, I will be very grateful if you can help. I'd like to end it and buy it tomorrow. The main disadvantage of this model is that they write that the automatic switch to heating, that is, it is impossible to refuse in advance. And you can set the heating time (for example, 30 minutes) or it will heat until you turn it off. And if you stay somewhere, what will dry up?

[alpha]

Hello alpha ! The fact is that in all multicooker, after cooking, the programs go to heating. The only exception is so far only redmond m70 and brand501 will appear soon. Of course, it is not convenient when you need to turn on the program and leave home, but I’m already used to it, because if you cook on the stove or in the oven, then you control the process and are also tied to the kitchen. In a multicooker, there is practically no need to control the process, press a button and wait for the end signal. If you take proven recipes for multicooker from the forum, then during cooking you can go about any of your business, without thinking about the fact that you have something there that burns or runs away. The main thing in a multicooker is the presence good the right programs and the good quality of the bowl, this one has it all.And heating is already a minor detail, if the dish stays on heating for a while, if not for a long time, it is unlikely that it can spoil it.

And if you stay somewhere, what will dry up?

Hello, Alfia! It happens to me that dishes are heated for 2 hours, they are made only better, stewed, like from a Russian stove.

Thank you very much for your feedback. We are already going for my assistant. I have 9 months. baby, I think I will appreciate the efforts of MV and there will finally be time for myself. And you can still ask the question that is probably boring to you, does not milk sour overnight in the CF and what about semolina? Although of course it is not difficult to cook it on the stove (you can not find fault), but still ...

Don't know, I've never cooked porridge on the timer, I don't have such a need, and I haven't cooked semolina for a long time, kids are adults ...

And my grandfather and son and I adore her, and rice too. We often have breakfast with cereals. It would be great not to jump around the apartment in the morning, not knowing what to look after, daughters or porridge. Has anyone ever had a case that having come home, say from work, dinner for some reason was not prepared?

Well, I came back from the store. People, I didn't buy it ... The consultant was very disappointed, it turned out that I know more about this model. Refuted all his descriptions. As a result, he delved into it and agreed with me. The only thing I could not argue with him about the non-stick coating of the bowl. I read on the site that "The bowl is made of anodized aluminum (3.6 mm) with a multi-layer non-stick coating NEOFLON from Daikin (Japan)", in general, he convinced me that this is the same Teflon, it seems that they even found a line about it in the booklet. He killed me by saying that ceramics are worse than Teflon, wear out faster and more harmful. But it's not so ??? !!! I really didn’t like the stand for the steamer, it was covered with burrs, and in general the assembly was somehow sloppy. Bliiin maybe I just came across this, I'm so disappointed. Well, I didn't want to give 7000 for it. And it was also the last one on the window. The seller says that they brought 10 pieces and in 1.5 weeks they were dismantled, like no one made a return. As for the stand for the steamer, I thought it would be a larger area, it turns out to be so tiny and is installed on the bottom (and therefore small), that is, it will not be possible to cook at the same time. In another store I came across a Redmond m 70 (cute, fancy and expensive). On Friday there will be delivery, m. B. will bring Stadler, I'll go try my luck again

said that ceramics are worse than Teflon, wear out faster and more harmful. But it's not so ??? !!!

As for more harmful ... who knows ... who knows ... But it wears out faster ... for most users it is. Because you cannot heat containers with a ceramic coating, and then lay food on them - the pores are so clogged, and then everything sticks (you must first lay out the product, and then heat it up), and the ceramics crack easily. BUT! The ceramic coating in Brand 37502 is time-tested, and for reasons unknown to me, this does not happen (in the sense, it does not stick, but cracks ... yes, there was such a case - they dropped the bowl and cracks appeared on its coating).

And the difference between the coating from Daikin and Teflon is that Daikin does not use the very acid, which is why Teflon is considered to be harmful to health.

Thank you. And when you bought this CF, you didn't have any sloppy parts? Here, honestly, I wanted to take a nail file and fix it After all, the thing is expensive.

There is a little uncut plastic on the outer part of the mv, but very little, at the junction of different colored plastic.
But after all on the price tag it is written made in China, from there and these jambs!

Have you been using it for a long time? As I understand it, you have 919, are there any fundamental differences?

I have been using it for 2 weeks and it works great.
Yes, I have 919, I was told that only the volume of the bowl is different, in 919 - 5 liters, in 909 - 4 liters.
Before buying a cultivator, I probably sat on the internet for 2 weeks in the evenings and studied all the models, the choice was from the Philips new model and 919, but still I came to the conclusion that this is better, I did not even take into account the rest of the firms, since there is no trust in them. I apologize in advance to those who have different views on these firms, this is my personal opinion.
Bork and the cuckoos looked, but their price is too high.

Alfia is up to you to decide what to buy, but I am very happy with our multicooker. There were no complaints about appearance at all. As soon as I saw her, I immediately fell in love. A wall-mounted double boiler can be ordered from Brand. I have been using it for two months. I like the bowl coating very much. Fried chicken with bones until not a single scratch.

Irman, thank you. What else can you order? Forceps? Are they really necessary? Some more scoop spoons ..

I get by with two silicone spatulas. There is a spoon in the kit. Her husband processed me with a fine skin and can also be used.

I bought myself this:
1. Tongs for lifting the bowl;
2. Soup ladle.
3. Cutting board edges are folded for convenience to pour the food into the multicooker.
4. Rice spoon.

I take out the bowl with silicone potholders.

Wow, how advanced everything is. : girl_cleanglasses: I never paid attention to such silicone gloves. I wonder if they are in our hypermarkets? N-vartovsk, I really look forward to the result of your dish.

I don’t know in your hypermarkets, we don’t have similar ikai, okay, metro, leroy merlin, etc.
Therefore, you have to buy in foreign online stores, and wait 25-45 days until it arrives by mail

[alpha]

alpha steamers and the top and bottom can be ordered on the official website of the brand, I have them and they fit perfectly. I have a multicooker without any burrs ... very good quality assembly! But I bought for a long time, in August, maybe they already started to cheat in subsequent batches ...

who knows the Brand website where accessories are sold? I can’t find something on the internet.

Look at our smacks.

Bowl from Brand 37501 is coated by Daikin
And the picture is not displayed, because on the autocorrect forum: Brand is always with a capital letter, and in the address on the picture must be with a small

Aaaa bowl, I already wrote they are almost identical, only the bottom of the stader is larger. The brand bowl fits well into my mv stler, only I cannot check for closing, the stler is 4 liters, and the brand is 5 liters.

So I need to check)))

How do you check? Does anyone have a brand? There you have to try to cook, the multicooker may refuse a new bowl and work incorrectly. I read it somewhere ...

If the bowl fits well, it will work. I bought two for Moulinex, a stainless steel from ARC, and a coated one from LandLife.

[Ira]

Ira, we always see you in romas, even in tulips.
And the tulips are really smart. Let winter not come, but spring immediately, with tulips, grass and other things

No, let it come! Let the snow cover all the mud! I want a New Year! I will dress up in a Christmas tree before the new year, but for now I look like my face ... I will leave the tulpans for the spring ...

Well, how can I know in face into an avatar, since you change it so quickly ... and you won't keep track

[Evgeniy]

Evgeniy, measure your bowl from all sides. Let's start with the dimensions.

Top: 23.9 cm.
Bottom: 21 cm.
Height: 14.5 cm.

The Brand's bowl has a width of 15.5 cm at the bottom inside, there is a narrowing at the bottom. And literally a centimeter higher - already about 19.5 cm.
Height - 14.6cm and top width - 23.6cm.

Branda has 23.5 at the top and 15 cm in height. And the diameter? As it is interesting in Ira, she fit into a 4-liter cartoon
Diameter (measured under the side) - 70 cm.

Branda has 23.5 at the top and 15 cm in height. And the diameter? As it is interesting in Ira, she fit into a 4-liter cartoon
Diameter (measured under the side) - 70 cm.

And I have 67.5 cm under the side! My waist is thinner! I had no doubt that everyone's tapes are different, I have several of them and they all show differently ...

I measured it with a tape measure and our 0.1 mm from above are not significant, but the height - my husband double-checked me, otherwise my eye still has that diamond.

I hope it fits, I ordered it on the site.))

Eugene under the side his bowl of measurements in a circle, how much will it be?

Somewhere 69.5

Thank you Irin, although all the numbers turned out differently, I tend to conclude that the brand's bowl will fit the stler.

Eugene under the side his bowl of measurements in a circle, how much will it be?

somewhere 69.8

I then thought that the upper diameter of the multi itself is much more important, and not the bowl. So Brand's is 22.2cm. Try to measure it in the Stadler.

[Manna]

Mannaand I thought the same thing. But as Ira, I think I should come up. They are made at the same plant, right? who knows?

The most multi, which is the place?

I then thought that the upper diameter of the multi itself is much more important, and not the bowl. So Brand's is 22.2cm. Try to measure it in the Stadler.

in 919 it is 22.4cm.

They are made at the same plant, right? who knows?

I don’t know ... but where do you know from?

Does not fit in height. I measured about 14 cm with us, diameter 22

[Ira]

Ira, so the one cover is Japanese Daikin, I assumed.

In general, they measured, they didn't measure anything, everyone's numbers are different! We will wait for Eugene to receive his cup and test the STE case ... And when will they send it ???