Bosch food processor - cuts into cubes!

And I want to clean up even more to admire and admire :))) But I'm afraid the family will not eat so much :)

[Skazi]

Skazi
Good day!
Thank you for your message! We were glad that we were not the only ones who did not understand why the self-tapping screw for the BOSCH Cubix pin was for.
Could you share information on how you used this self-tapping screw? The fact is that the pin itself does not fit on the "native" drive. The hole in the pin is slightly narrower than the broken one.
Thank you very much in advance!
PYSY: in the service they shrug their shoulders ... (((

And Boshik has a kunkurent
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=33122.0

[Marusya29]

I was asked here to take a picture of waste when shredding-rubbing in Boshik, so I took a picture, or rather, a whole video was shot by a maniac, what can you do ...

Marusya29, take

[Marusya29]

Marusya29
After watching a video from Lisss's what can you say - is there even less waste in your combine, or the same amount or more?

Well, you can answer right now and without filming a video .... Lisss posted it, so there is something to start from and with something to compare.
I'm just comparing different models ...

[SilviaBum]

SilviaBum, I had a Bosch MUM 4756, and now I have a MUM 47A1 (it has fewer nozzles). and the cutting of the above two models is the same, like this:



my personal opinion is that there is more waste in the MUMs when cutting than in MSMs .. but the "plus" of cutting MUMs is that the release goes into any container, and not into the bowl, as in MCM. that is, we are not limited in scope.

[Lisss's]

Lisss's - Thanks for the detailed answer

Girls, I bought this miracle in the online store today! But I have a question (I live in the Crimea), should a pusher be included in the delivery set of Boshik's cube to remove residues from the cube cutter? I didn’t have it, and the delivery service said that it was necessary. Call the manager to understand or not?

[Karsa]

Karsa, must be included! Understand, the thing is necessary, without it you are tortured to clean the nozzle.

The manager says that such a package, they say, the goods were sent from the warehouse, packed. Type it is not supposed to have this pusher. It is sent for packaging on the Bosch website in Ukraine and in the drawings in the instructions. And there are only basic nozzles. I say that this pusher is included with the cube cutter, and not as a separate attachment, but they tell me that there is no such thing and should not be. By the way, there are no brushes for cleaning nozzles either, but should there be?
I would like to ask those who have bought in Ukraine in recent months. And where can you get the mandatory equipment in order to speak reasonably with the manager.

Yes, it is impossible to clean the cube cutter normally without this pusher, and even on the Russian site of Bosch it is not included in the complete set. There is no evidence and nowhere to buy .. (

Dear hostesses, help me figure out if all the attachments fit the cube from the list:
Bosch - MUZ4RS1
Bosch - MUZ4PS2
Bosch - MUZ-45 AG1
Bosch - MUZ-45 KP1
but then I finally decided to order, but I doubt something especially the last two are embarrassing ...

[Karsa]

Karsa
Look at the instructions for the combine, the first clamshell page. Figure M and Figure K. M shows how to disassemble and wash the mixer and you can see that the mixer knife is washed with a brush. In fig. To disassemble the nozzle "cube" and it is shown in fig. No. 3 that only a pusher can push through the "cube cutter". In the instruction itself, page 29 (Russian language). "Cleaning and maintenance": "cleaning the dicing device" says that food residues are removed from the cutting grate by means of a special tool, reference to figure K.
And on page 44 instructions in Ukrainian. lang.

[kisyonok]

kisyonok
Bosch - MUZ4RS1
Bosch - MUZ4PS2
These fit exactly. Information from the instructions for the combine.

I bought a CD for Julien MUZ 4 JS 1. It fits exactly.

Bosch - MUZ-45 AG1
Bosch - MUZ-45 KP1
It is written about these attachments that they are for the MUM 4 and MUM 5 combines. But you can do this: go to the store and try on the disc attachment from MUM 4 or MUM 5 on the Bosch cube. If it does, then the ones you indicated in the list should also do.

[kisyonok]

kisyonok
Bosch - MUZ4RS1
Bosch - MUZ4PS2
These fit exactly. Information from the instructions for the combine.

Thank you!
Where did you buy the Julienne CD in Moscow? I generally thought in the refrigerator. ru to order. I don’t know where else there is ...

[kisyonok]

kisyonok
Bosch - MUZ4RS1
Bosch - MUZ4PS2
These fit exactly. Information from the instructions for the combine.

I bought a CD for Julien MUZ 4 JS 1. It fits exactly.

Bosch - MUZ-45 AG1
Bosch - MUZ-45 KP1
It is written about these attachments that they are for the MUM 4 and MUM 5 combines. But you can do this: go to the store and try on the disc attachment from MUM 4 or MUM 5 on the Bosch cube. If it does, then the ones you indicated in the list should also do.

I don't have the opportunity to go shopping, so I wanted to order online. where did you buy the julienne disc, in Moscow? I generally thought in the refrigerator. ru to order. I don't know where else is there ...

Where did you buy the Julienne CD in Moscow?

No, at home In a neighboring state ...
You do not need to go shopping, just go to the nearest one and try on any commercially available disc for the MUM 4 or MUM 5 series combines on the MCM "cube". Boshiki is not in short supply, I think that the "cube" and MUM should be available. But it looks like the MUZ-45 AG1 and MUZ-45 KP1 disks will fit the "cube". They have a fitting hole, which is the main problem. This hole is different in different series. There are triangular, for example ...

I want to order a crooked disc and a medium grater, but we don't have them in Simferopol, can someone tell you an online store in Ukraine where you can buy them?

[Karsa]

Karsa
I bought the disc for Julien MUZ 4 JS 1 in Comfi. By the way, it was much cheaper there than in online stores.

online store
The price is reasonable, even with delivery.

Girls, help out please !!! The other day, my cube completely gave oak ... the story is briefly as follows - I wanted to beat a few eggs with a blender, well, beat it, began to unscrew the blender, and he figured it out right on the combine! that is, I only have an empty bowl in my hands, and the plug with knives and all the eggs remained on the combine! accordingly, all the liquid immediately leaked inside ... the husband cannot disassemble the harvester, because there are very tricky fastenings ... hence a few questions to the knowledgeable forum participants:
1) how to disassemble this stupid combine to see if the engine is wet or not? is it possible on your own or only in service? (we just now live in the Ryazan region, 100 km from Ryazan, and it is very problematic to transport to the service, I would like to do it on our own)
2) we are going to Moscow in June on business, can this ***** (untranslatable pun) combine be exchanged in the service for another one under a warranty card? because this is not his first breakdown, and he already got me ... a completely "raw" combine .... he already broke down - on the stick on top of the gear (where the bowl is put on), the bowl wedges if on an uneven surface worth it, the gum broke in the first two weeks, the bottom was also scratched quickly, in general, not a harvester, but one frustration ... I really look forward to your advice, since my husband was completely upset ... because the idea to buy this harvester was mine. ... sorry for writing so much, it just hurts ... many thanks to everyone.

Any technique can jam if it is deliberately misused. If you put the washing machine on an uneven surface, it will also quickly * oak * from wild vibrations of the drum. So you need to operate any equipment carefully, accordingly, the instructions are just a set of plastic with an engine ... I really like the combine, well, just a great helper. No cooking is complete without it. And it saves time, and most importantly, you don't get tired as before. I cook potatoes for Olivier on a wire rack in a pressure cooker for a couple, in advance, so that they cool down, then the cubes do not stick together. There is a minus - an ill-conceived set of graters, I had to bribe an average and a julienne grater. I think they did not deliberately complete the necessary and expensive graters, the additional income of the company ... If they offered another alternative to this combine, I would still choose it.

[Lionsea]

I think that Lionsea waiting for practical advice, not reading notations!

Absolutely no notations personally, although everyone is free to see what he wants to see in any information. :) What advice can there be? -Do not repeat other people's mistakes, read carefully the operating instructions ... The engine axis flew from the bowl skewing (put it on an uneven surface), flooded the engine (I did not disassemble the blender bowl correctly), although the instructions contain all these points described in detail ... I agree with many that the system for turning on the drive button on the case has not been finalized ... And the girl's message is dated April 19, so the period for giving advice on this particular occasion has long expired, so I can only wish her good luck .. ...

Absolutely no notations personally, although everyone is free to see what he wants to see in any information. :) What advice can there be? -Do not repeat other people's mistakes, read carefully the operating instructions ... And the girl's message is dated April 19

Sorry, I don't understand the meaning of your good wishes after 1.5 months. Here, all adults and everyone without these reminders understands how to handle technology. Especially when their "hard-earned" payments have been paid for it. I think it is incorrect to use other people's mistakes to raise their own self-esteem.
With good wishes!

Do not apologize ... Any forum was created in order to express your thoughts and wishes on some topic ..

Do not apologize ... Any forum was created in order to express your thoughts and wishes on some topic ..

An apology in this context is just a form of polite treatment. I think this discussion can be ended.
With good wishes!

After reading the entire Temka in detail, I now ordered a cube. On Monday they will bring)) Oh, I'm worried kaak)))
So I will soon join the ranks of the happy owners of the cube!))

SOS !!! They brought me a harvester, but it does not turn on !! ((I read somewhere in the topic about some kind of lock ... but now I can't find it and I'm sooo nervous. Help, please!

don't panic

close the bowl very tightly until it clicks, then put the lid on and push it in too tightly, it will also click. only after that it will turn on. usually don't expect it to be so tight, and don't snap, then it won't turn on. don't be afraid, there it will NOT break.

the arrow on the lid must match the arrow on the handle. it is important. I was so worried for the first time until I realized where this "bisova" arrow was.

The combine will not turn on unless the blender is removed.

Thanks It works!! urrraaa !!! I really didn't screw the lid of the bowl to the end, like there was a click, but it turned out not to be the same ...

First of all, of course, I tried the cube: raw potatoes, carrots and beets. The result exceeded all expectations! Super!

Kupusta chopped 1 mm,
cheese on a fine double-sided grater (medium for hard varieties - do I understand correctly?),
turned sea buckthorn into mashed potatoes.

I also just could not help but try to knead the dough (for dumplings) with a knife - to say that I am very happy to say nothing)) Super!
Of course, you can't do much, but that's enough))

In the process, the lid of the blender came off several times, but pressing it down well, everything continued to work)

Then it came to the blender. I decided to grind the chocolate, put everything on, but again it does not turn on ... and then an inner voice hisses "without a bowl with a lid on, it does not work!" Well, they came up with the same !!!!

... As a result, she pleased her home-made with hot chocolate milk) and then another raspberry cocktail)

Thank you all!!!!
Now I sit, look at the cube and start to rejoice

In the process, the lid of the blender came off several times, but pressing it down well, everything continued to work)

but this should not be. then it did not snap tightly. Sometimes I have a combine almost on the table itself, but the lid never (mmm) left ...
and carefully read the instructions.

blender compartment cover, apparently, huh? there it is necessary to wrap the clerical mustache with an elastic band, and everything will be comme il faut!

Well, today I made mashed potatoes - mmmmmmm ..... no words, some emotions) Such an airy mashed potatoes turned out)

and on what mode mashed potatoes and cutlets?
I somehow twisted boiled potatoes in a blender, so my wallpaper paste turned out ...

and on what mode mashed potatoes and cutlets?
I somehow twisted boiled potatoes in a blender, so my wallpaper paste turned out ...

I made potatoes with a mash nozzle) or whatever it is called ... press mash ... with screws which.

and cutlets with the main knife. I ground the onion (separately, however, because I needed a lot) I chopped a little bread, then threw the meat in pieces) The only thing was that my volume was large and therefore I had to go in two passes. But it didn't bother me. Well, I had to mix it by hand) in extreme cases I have a hand mixer with "mixers"

And a portion at a time, I think everything will mix perfectly with a knife))

[mamarishka]

mamarishka, buy additional hook attachments for the dough in the SC - this is such a thing for minced cutlet

I now grind the meat with a meat grinder directly into the bowl with hooks, and then beat the minced meat - mmmm, juicy cutlets

yes, I really want to buy a nozzle) and graters)

I tried a whisk disc today. The first emotions are not squeaks or clumsy, yeeees! Well, I was really afraid) Yes, how wonderful it beats! I made a charlotte, well, and decided to test the disc))) so the eggs were sooooo tightly beaten that it seemed to me I had never seen anything like this.Then sugar and flour mixed with eggs in a matter of seconds. I like it!

I also forgot to say that I don't have any silicone gasket in the cube.

I certainly don't cry, but I was very upset - the second use of the disc left a huge mark in the bowl. yes so strong and shavings on the disk well ...

I certainly don't cry, but I was very upset - the second use of the disc left a huge mark in the bowl. yes so strong and shavings on the disk well ...

Musik, don't be so upset! let it be the biggest trouble in your life!
"even if you are eaten, you still have two ways out of the situation."
first. you return to the mazin and demand that you replace all this "happiness" with normal.
second. you throw a party and at the climax you launch this fucking disc from the 16th floor! (I did just that, it was too far for me to go to the shop for a showdown).
I here somehow got in touch - intellectual - with one uncle from the service. so he said that indeed some of these discs came out with a spouse. and they had a secret order to change the bowls and discs for clients without unnecessary noise, so that the excitement did not rise. but, alas, I talked with my uncle after the warranty period. so I didn't get a free replacement.

[mamarishka]

Girls, I read the whole Temka voraciously. I ordered a Bosch cube, they should bring it tomorrow. True, I have read the topic to the end, I have already forgotten the first pages. So sorry if this has already been discussed. The question is: will the MCM 5540 dough hook attachment fit the "cube"? I want to buy it in SC.

mamarishka, buy additional hook attachments for the dough from the SC - this is such a thing for minced cutlet

Judging by the opinion of the professionals, should it fit? Has anyone tried to put this attachment on the "cube"? Are there any nuances that need to be kept in mind when planting?

[Valeria +]

Valeria +, everything fits! my sister has a cube, and I have 5530, so she tried my hooks and bought herself the same. uses it very often. no nuances

for minced meat they are simply irreplaceable and my sister says she mixed something else with curd. but they knead the dough badly - they just drag along the bowl with them

but they knead the dough badly - they just drag along the bowl with them

Here are the ones on! And I wanted to order this hook precisely because of the dough.The other day my bread maker broke down, so I thought while I’m going overboard: I’ll knead the dough with the help of a combine, and bake the bread in the oven (and in the meantime I’ll think about which bread machine to buy myself + I’ll save up money for it). I saw your video here, where you kneaded rye dough with a combine using a hook and using a utility knife.

So, for yeast dough, the hook won't work for me, right?
How about that utility knife that comes with the cube? Will he knead the dough for me?

let's just say - I mix in small portions, up to a kilogram - it can't cope with such a volume. puts on hooks and wears proudly on the bowl .. I don’t like that, I think if there is more dough, he will behave better ..

utility knife - kneads very well, but you need to adapt to it. it heats the dough a lot. while I was learning to knead with it, I threw out the finished product a couple of times - the knife overheated the dough and the yeast died, the product was flat like a pancake .. secondly, if the dough is watery, it tends to climb under the knife, along the trunk of the combine, and then it stops kneading .. the knife kneads sooo quickly, literally in 2 minutes, it is difficult to keep track. that is, you can knead them, but there are many nuances, and personally I only interfere with them a few rolled recipes. more often I use a hook in another bosha, although, of course, the knife gives a gorgeous gluten, you can't get such gluten with a hook ..

here, in Japanese bread - it is just absolutely downy. my beloved, I don't know how far it can be seen from the photo, but take my word for it - swan fluff:


sister kneads dough in HP. I have no HP

utility knife - kneads very well, but you need to adapt to it. it heats the dough a lot. while I was learning to knead with it, I threw out the finished product a couple of times - the knife overheated the dough and the yeast died, the product was flat like a pancake .. secondly, if the dough is watery, it tends to climb under the knife, along the trunk of the combine, and then it stops kneading .. the knife kneads sooo quickly, literally in 2 minutes, it is difficult to keep track. that is, you can knead them, but there are many nuances

I will try to adjust. I'll start with a pulse mode + I will add chilled water to the dough. As soon as I more or less adapt, I will immediately inform you and post the photos.

I don't know how much you can see from the photo, but take my word for it - swan's down:

I believe. But the photograph also shows that the bread is downy.

By the way, you know what's interesting? Only a few days since my bread maker broke down, and during this time I have baked bread in the oven three times already. So my husband (and myself) likes bread from the oven more. Although I did not change anything in the recipe itself, I just kneaded it with my hands and baked it in the oven.

there is a different crust in the oven, it gives an aroma, the oven does not compare with HP .. mine never recognized HP bread - it is them .. any sweet, even salty had to adapt ..

on kneading with knives - here at Luda mariana-aga from Toronto in LJ see the article on the development of gluten when kneading with knives, I was interested

and the main article - the stages of kneading with knives - is unfortunately not available now .. if you need, I can search, maybe I have it somewhere in the files ..

and the main article - the stages of kneading with knives - is unfortunately not available now .. if you need, I can search, maybe I have it somewhere in the files ..

: red: can I, too?

So my husband (and myself) likes bread from the oven more. Although I did not change anything in the recipe itself, I just kneaded it with my hands and baked it in the oven.

I wonder how))) Now I probably will definitely risk it without a bread machine!
Did you use a special form?

I already missed my cube so much, I'll go pick it up today. They told me on the phone that I had "gnawed" my own bowl), that is, they refused to replace the bowl and the whisk disc. These are such wonderful masters)

I already missed my cube so much, I'll go pick it up today. They told me on the phone that I had "gnawed" my own bowl), that is, they refused to replace the bowl and the whisk disc. These are such wonderful masters)

No one has canceled consumer protection yet.meanwhile, they receive their salaries from our money! so let them work out!