Problem situations in the operation of dishwashers

if for the first time a liter of water to keep it wet, and then 1.5 kg climbs on hurray, I also have a narrow machine

well, it's okay, it still says that if water spills out, don't pay attention, add salt while it is pouring

[redleafa]

redleafa, pour at least kg of salt for the first time, while water will overflow. After that, the salt indicator will go out. And further. After pouring salt, PMM needs to run one cycle without dishes - this is how it was written in my instructions ...

That's where the dog rummaged !!! The water was already there! I just installed it yesterday, I washed the dishes with tablets three times, and the indicator is on! Well, I can't admit it, I read a lot, bought salt and go ahead, act!

Yes, Olya, this is very familiar to me! When I installed it, I was not yet familiar with it, I had to shovel the instructions and the vastness. Now it's good, I asked the question, SKOKA immediately answers the people. You look, and Guru-Alexander will pull up. And then ... There was no one to throw in a waistcoat.

[mowgli]

mowgli, * Anyuta *, marinastom, thanks, I'll go and fill up the salt. Indeed, good people have gathered here, they will prompt, help!

good day
tell me if someone has this: baskets began to ride badly. PMM year, bosh for 14 sets, I use phosphate-free tablets and add salt. What could be the reason

baskets began to ride badly.

I use phosphate-free tablets and add salt

Well, this is clearly not interrelated ... Pull the baskets out completely and see if the casters are clogged at the junction with the basket. Maybe there is something "wound" ...

The first thing that comes to mind ... take out the baskets and check - rinse, clean the wheels. Are there any deposits there?

[* Anyuta *]

* Anyuta *new ava you are so sexy
I began to feel uncomfortable in a cap ...

so sexy

... I tried ... I had the same for a long time on the same forum, I missed her something ...

Although in nature, like 6y, there are stainless steel rivets, but I have not yet met with my own eyes on pans.

I have rivets on stainless steel pans in my set. In PMM, they are washed perfectly, there are no raids on them. But on the glass covers, aluminum ones, also mine in the PMM, did not notice a raid.

tell me if someone has this: baskets began to ride badly.

Once I had this too. I even started calling the master. Then I decided to wash with tablets for cleaning washing machines and PMM "Frau Schmidt". It helped.

Once I had this too. I even started calling the master. Then I decided to wash with tablets for cleaning washing machines and PMM "Frau Schmidt". It helped.

thanks a lot, I'll try

I have rivets on stainless steel pans in my set. In PMM, they are washed perfectly, there are no raids on them.

And what kind of dishes are so high quality, can you brand / series? I don't buy one at all, just in case. While it is new, you cannot distinguish it by the quality of the rivets, and after the start of the garbage dumps, hello, you are a surprise. Inside, it is clear that they remain shiny, but outside the aluminum gets scary and washes out. One member of the forum even wrote that instead of the rivets washed off into the sewers, he screwed in stainless bolts. Okay, huh?

Well, about the fact that the rivets from kitchen knives have dissolved, I have already read this on this forum.

[mowgli]

mowgli, * Anyuta *, marinastom, thanks, I'll go and fill up the salt.Indeed, good people have gathered here, they will prompt, help!

I can still tell you. I had salt to the eyeballs, but then they advised to stir with a spoon. I just poked on top, and she is a gurgle, and failed. I was still sleeping.

I poured all one and a half kilos, I also interfered with a spoon. In general, the instructions said that two kilograms of salt fit.

Tell me who knows, if the dishes are a little slippery, when I take them out of the PPM (hot) in which direction to look? what could be wrong? I only use it for a couple of days, I will not understand what she needs.

probably the water is soft, but there is a lot of rinse aid, try to reduce

probably the water is soft, but there is a lot of rinse aid, try to reduce

exactly, the water is very soft, I did it according to tests, I set the salt to 1, although it was probably possible not to put it at all?
Thank you very much, I'll try to make it smaller, but how much better is it?

I just have salt regulated-more-less, put on a minimum or a little more

Dear experts, please give advice! My PMM began to hum in the process of washing, the indicator blinks that water is not flowing. I turned off the machine, but when I turned it on, it immediately hums continuously, I set the program, the water is not collected, the water meter is spinning and, judging by the sound, the water is immediately drained into the sewer. Maybe there is some clogged filter at the inlet? It's just very problematic to call service workers in our region now, maybe it's okay there (with hope)? Or is it still trying to deliver the master? PMM under warranty, Electrolux 43005W model.

[Snusmumrik]

Snusmumrik, Masters, you will not do it yourself, especially under warranty.

[sazalexter]

sazalexter, Thank you! Eh, who we have here now will fulfill the warranty obligations. Okay, I'll try, maybe they'll repair it for money at least.

Save-help! Yesterday we connected (ourselves) our brand new Siemens SC76M522RU dishwasher. She poured salt (into the water, as instructed), poured rinse aid, put a pill. I loaded some dishes, turned on the Eco program (3 hours) and went to bed - it was already too late.
The next morning I opened it - the tablet did not dissolve, so it remained in the door, the plates seemed to be clean, the dishes from under the cutlets were greasy, and most importantly, everything was wet - both the dishes and the walls and water near the filter.
I thought the dishes should be dry. Perhaps I messed up with the pill myself - I put it there tightly, I probably should have just put it. The instructions say that the pill should get into the car, but it stuck to me.
Why is everything wet?

[SvetaI]

SvetaI, well, now try washing on a normal program. If there are problems here, then we will think about what to do.

[SvetaI]

SvetaI, I had such a problem when, following someone's advice on the "auto" soap "- at first I thought it was an accident, but when I repeated it, I was convinced that it was this program that was to blame and, moreover, it was in my car - for girls everything was wonderfully washed on it , but for me the tablet did not completely dissolve, and the powder from the tank did not dissolve entirely

[SvetaI]

SvetaI, I also have Siemens and I do not use Eco mode, although before that I had an Indesit dishwasher and I constantly turned on this program at night. At Siemens the dishes after Eco are wet, apparently some kind of flaw in the program. I like Auto, Intensive (70 degrees), and short for 29 minutes.

[Bijou]

Bijou, Scarlett, Annutka, thanks for your answers and sympathy. The instructions for my typewriter say that Eco is the recommended program, so I chose it for the first time. Today I will try Intensive or Auto (if my men don't wash all the dishes out of habit again during the day).

(if my men again, out of habit, do not wash all the dishes during the day

My husband doesn't know which side to approach the sink from

And mine says: I feel sorry for you, then you will wash after me anyway.

And mine says: I feel sorry for you, then you will wash after me anyway.

And mine is in a hurry to wash it by hand before I come home from work, so that I do not drive the machine in vain and spend money.As a result, I wash everything in PMM and it turns out only an overrun of everything

So, I am reporting. By the evening they had saved up my dishes, set the program Intensive 70 degrees. Everything has been washed, dried, glistens and creaks. U-ff ...

The instructions for my typewriter say that Eco is the recommended program, so I chose it for the first time. Today I will try Intensive

I don't like Eco program. I have a different dishwasher company. I always wash the dishes on intensive at 65 g ..

Yes, it looks like this Eco is too economical - she doesn't spend anything and doesn't wash anything.

Yes, it looks like this Eco is too economical - she doesn't spend anything and doesn't wash anything.

Environmentally friendly. By the way, I stopped taking any washing type "Eco" - not only is there zero sense from them (well, you will not explain to others, sho stains on your things from the fact that you are a green peer), so also I watched the show that not all eco-products are actually eco-friendly

Dear, please help, I don’t understand what the problem is, after washing the machine turns on the e22 error and the tap lights up, as if there is no water, the dishes are clean

Tell me, maybe someone had this ...
The water is soft, salt at 1, rinse aid at 2. I have not changed the settings, and in the last couple of washes on transparent dishes, the plaque is white. This is when washing with gel. A tablet of soap - everything is fine.
I don’t understand what’s the matter ((

[Ulitk @]

Ulitk @, Wash with separate means, clean the filter, rinse the PMM with a cleaner.

[Ulitk @]

Ulitk @, Wash with separate means, clean the filter, rinse the PMM with a cleaner.

Salt and rinse aid are always filled-in.
I use powder and gel more often. That is why I don’t understand where the plaque comes from (
With a tablet of soap, pans and a baking sheet with a wire rack from the oven, well, and the dishes that were ...
The PM itself was washed with a product a couple of weeks ago, the filters are clean.

[Ulitk @]

Ulitk @, The PMM tablet sees itself or you switched it, maybe you forgot to return it to its original state?

[Ulitk @]

Ulitk @, The PMM tablet sees itself or you switched it, maybe you forgot to return it to its original state?

She has no program or switching to a pill, she thinks it is powder. That is, the salt and rinse aid never turn off.

[Ulitk @]

Ulitk @.Write a PMM model

Dishwasher (60 cm) Electrolux ESF6210LOW
Now I have launched a powder washer. I hope there will be no raid, I will unsubscribe how it will wash up.

[Ulitk @]

Ulitk @, 􀀙􀀑􀀕􀀃from the PMM instruction page 37
􀀙􀀑􀀕􀀃Clause 6.2
When using tablets containing
salt and rinse aid, do not fill
salt bone and rinse aid dispenser. In‐
the rinse aid announcer always lights up,
if the rinse aid dispenser is empty.
1. Set the level of the water softener
to the minimum value.
2. Select the minimum dosing level
rinse aid.
In case of transition from
combined
detergent tablets
funds for separate
use of detergent,
rinse aid and dishwasher
salt, do the following:
1. Switch on the device by pressing the button
"On off".
2. Set the water softener to max.
the maximum value.
3. Make sure that the salt container and dosage
rinse aid is full.
4. Without loading detergent into the appliance and
cookware, run the shortest
gram including rinsing step
niya.
5. Set the water softener according to
depending on the water hardness level in your
our region.
6. Set the rinse aid dosage.

This has never happened when changing the means. She did not perform such long-term actions.
And now, after the gel, maybe it deteriorated (
In general, I'm waiting for the end of the wash with the powder. If it will be the same, I'll turn the settings.

Everything was washed with powder perfectly, no plaque and stains.
Alexander, thanks for the advice.

I report:
During these 2 weeks, after reading the Internet and testing all my detergents and programs, I came to the conclusion that Japanese gel is not suitable for the hottest intensive program in our very soft water (
All stains from the dishes were washed off with powder, nothing else appeared. Now I use the gel only for the IVF program.

Good afternoon, everyone ... I have questions, I can’t find answers (((I recently installed the dishwasher (I use a week) Bosch SPV53M10EU. to put the sink at night, and in the morning to take out the dishes, it remains IN CONDENSATE ... I can't understand how it should be. Maybe someone can suggest something specific ... a model with active drying along the way (with a heat exchanger
)

I can't understand how it should be.

this is how it should be - it's okay!

[VeraCh]

VeraCh, I also have Bosch, but the tabletop and the same story. There is little condensation, but it is always present. I put it half the time last night. She took out the dishes in the morning, and the dishwasher was wet on the ceiling. Once I tried to turn on the additional drying to make the plastic dishes dry better. It didn't help, the dishes (plastic) remained in several cavities (shallow) with water. Apparently something is wrong. Thank you, Annie.