Problems and breakdowns of Moulinex bread makers

It looks like the power transformer is buzzing - it shouldn't make a sound that much. It may burn out over time due to overheating. You better try back to the store quickly. Or, if it's too late, go to the workshop.

Rem, thanks. I called one of the service centers, they said that the mulinexes really make a small sound when plugged into the outlet due to the fact that the transformer itself is small and works at low frequencies (if I remember correctly from the words). But how to determine how strong the sound is is not clear
Maybe someone has no sound at all ...

I can definitely say that at a distance of two meters from the stove in silence, you should not hear anything from the stove when it is simply plugged in! You can go to the store and compare the noise with any, even another company. This will be a confirmation that the store is obliged to change the oven or give money.

Were in Mvideo with hp, they refuse to return the money, they say a technically complex product.
And to hand over hp for examination because of the sound, it is unlikely that anything will come of it. Like this

[Helenka]

Helenka, but don't you have a law on the possibility of returning / exchanging goods within 14 (for example) days? Not because it is defective, but because it did not suit you?

[2. In the event that a similar product is not on sale on the day the consumer contacts the seller, the consumer has the right to refuse to execute the contract of sale and demand the return of the money paid for the specified product. The consumer's demand for the return of the money paid for the specified product is subject to satisfaction within three days from the date of return of the specified product.]

2. In the event that a similar product is not on sale on the day the consumer contacts the seller, the consumer has the right to refuse to execute the contract of sale and demand the return of the money paid for the specified product. The consumer's demand for the return of the money paid for the specified product is subject to satisfaction within three days from the date of return of the specified product. This is an excerpt from here:

🔗

Helenka , read carefully. Don't be fooled!

hmm .. the jokes continue ... after a couple of glitches described above, my stove finally uchudit ... I put it on rye, forty minutes have passed, I hear my dear squeak ... I come, it is hot, three letters HNN are blinking on the screen. Apparently the tents did not shut off when the dough was being raised. in general, a piece of dough had to be thrown away and the stove was taken to the service today, I had to buy store bread (n) better I won't eat bread at all than that ...

Here I want to inform you that my "new" bucket also broke. The breakage is the same, only I will not change it anymore. I will buy another stove ....... from another company. Moulinex for me disappeared from stores ...............

They say the Delongues aren't bad stoves

The fairy tale has long become a reality for this brand. My story is similar, I bought a mulk, after 2 months it broke down - the reason is the same. How many nerves were spent, how many tears were shed !!! I felt like such a fool and a failure !!!! I came to the forum, for the first time and immediately received the support and understanding of the kindest people, bought myself 253 Panasonic, since then I live on the forum, I chew bread (and not only!), I don’t bother.
What I wish you too !!!! : flowers: And the messages of the new victims of the overseas moulinex still take to heart! And Moulinex, after so many messages about marriage, does not even think to improve ...

The bread maker starts to beep constantly during baking until the bread is finished. We were taken to a service center, diagnosed, and said that everything was normal. There were problems with the bucket - changed. Today we tried to bake bread with a dark crust on mode "2", an hour before the end of the program (when baking), the oven began to beep continuously. The bread was baked, but the stove sounded until the end of the program. What do you recommend to do? Should we take it to the service again? (There is a week left until the end of the guarantee) Thank you in advance

I think the fault is in the control board.If they tested it in the service center and did not find anything with the test, this means that the malfunction appears in the real baking mode, when the heating elements are turned on. Perhaps, during heating, the electronic unit malfunctions and the signal turns on. I advise you to contact the service again and try to prove to them the need for a full check.

This problem does not occur with every baking, but let's say in 2 cases out of 10. And it's not a fact that this problem will appear in the service during full testing. I get the impression that the HP is overheating and the sensors start beeping. Maybe I'm not right.

In any case, this is an electronics malfunction. It is not the sensors that beep, but a sound-reproducing device ("buzzer"), which is activated by a signal from the control board. The control board is a microprocessor device (microcomputer) that works according to the program that you ask the bread maker. Programs are stored in the permanent memory of the processor. The baking end signal must be issued at the end of the program. The fact that it appears at the wrong time indicates that the control board is not working properly. The fact that this does not happen every time indicates an unstable operation of the electronics of the control board. For repairmen, such a malfunction is unpleasant, since it is disappearing in nature and painstaking work is required to determine the cause. Insist on replacing the machine while it is under warranty, or replacing the electronic unit. This is your consumer right.

Can you please tell me what to do to carry for repair or am I dull? The situation is this: I bought the stove 4 days ago, baked it 3 times, everything was ok. Now I put in the ingredients, everything is the same as before, but after the launch nothing happens. The countdown is running, but the dough is not kneading. For repairs?

[alenkaa]

alenkaa Turn on the dough without components, if it does not twist, then to the service

In the mode, the dough also does not twist. Heating goes on, but the dough does not knead. It's a shame when something new doesn't work.

In the mode, the dough also does not twist. Heating goes on, but the dough does not knead. It's a shame when something new doesn't work.

I had such a case once too .... HP just decided to rest until morning.
And the next day it worked. I have already managed to be upset a hundred times, but everything went well with her. I wish you the same.

Thanks Iriska. I really hope for it.
Could this be due to electricity? The light blinks all day. And in general, at our dacha, there is rarely 220 in the network.

Uv. Alyonka! Try testing your bread maker with a dough machine. Sent to your Email.
Test in an attached file from the "Repair and Service" journal, page 55 of the journal. The article is called Moulinex Bread Maker Diagnostics.
View the file with DjVuViewer. The article will be viewed on page 71.
The test checks all the units of the bread machine.
Based on the test results, everything will become clear.

Good day!
Can you please tell me how things are with the bucket from the 6002 model, is it identical to the 5000th models and the bucket has the same diagnosis - frequent breakdowns, or are these models of stoves doing well?
Thanks in advance!

[acura]

acura The design of the bucket was changed and possibly for the better, as time will tell. There were other problems 🔗
The straight line did not work right after the purchase - it only kneaded the dough, the dough baking did not start. Due to the lack of spare parts, a month later they were replaced with a new one. The second one burned out after two weeks of operation. There are no spare parts again, wait at least a month ...

After a month of use, a backlash appeared on the rotating shaft. During the kneading, there was a strong grinding and clanging sound. We gave it to the workshop under warranty. After the repair, the bread began to burn, the shaft malfunction was not eliminated! :(] After a month of use, a backlash appeared on the rotating shaft. During kneading, there was a strong grinding and clanging. They gave it to a workshop under warranty. After the repair, the bread began to burn, the shaft malfunction was not eliminated!

Ill-conceived, too fast programs that prevent the test from going well.As a result, all baked goods baked in accordance with the program are of extremely low quality: heavy, sticky crumb, crumb pores can be either very small (the dough did not fit before baking), or large, but with very thick walls. In the case of programs for baking buns and baguettes, manual correction is possible: after cutting the dough, you can leave it to come up in a warm place and only then bake in manual mode, since the program has time to reset by this time. Very labor intensive. With bread, there is no possibility of adjustment.
3. Agitators almost always remain in the baked loaf of bread, each time you have to pull them out with a special hook that comes with the kit.

4. Most of the original recipes require adjustment, the most common problem - it is proposed to use more flour than necessary, the dough turns out to be very steep, with all the ensuing problems

Burnt out on the third baking !!!
I can't say anything else bad. I liked everything very much, with careful handling, it would have served for a long time if it had been of proper quality.
Comments are superfluous ...

I've read horror films about Moulinex already scary. We have never had this, no problems with the bucket, or with programs. I have had mulinex ABKE 41 for 3 years. When I bought it I baked bread just super. Then they hid it for 1 year, and when they started baking bread again, she refused to do it. It kneads well, but the bread doesn't grow well. I changed flour, yeast, loaded everything with warm recipes. And before the recipes, there are many comments. How can you run out bread weighing 750 grams. with ingredients weighing 450 grams?
Can anyone tell me if this xn has a function for baking bread (separately), and if still not, can you bake bread using the function of making jam?

Thank you very much ! My doubts were, therefore, justified ... I really wanted Moulinex 600230, I won over with its appearance, design, and the ability to bake small buns and baguettes, but you probably have to make a choice in favor of a backup option, namely LG 205CJ, and bake baguettes in the oven .. ...

Yesterday I bought a Mulinex bread maker model 200036. I have long dreamed of such a unit. Today I decided to try it .... I laid everything, but how it turned out to be wrong with the flour. And nothing happened. The stove of the dopeka until the end, when it began to emit a squeak, I turned it off by pressing the start button. Having decided to turn it on after 2 hours, I was given an HNN error. Already 4 hours have passed, but nothing has changed. I'm upset. What's wrong with her .... broke .... ??? hung .... what to expect, what to do ???

Girls, I had an emergency yesterday:
when kneading bread, my HP (Mulinex 2000) fell off the table (not even from the table, I was doing something on the table), but from a higher curbstone and now it does not work Nothing is broken, but it does not work ... touched, apparently there was a strong vibration.

That is, the bucket does not fit tightly into its place in the body, accordingly the agitator does not rotate, and the sound is not the same as always.

Maybe it happened to someone, how serious can it be? Tomorrow I will call local services.

made a mistake with the flour. And nothing happened. The stove of the dopeka until the end, when it began to emit a squeak, I turned it off by pressing the start button. Having decided to turn it on after 2 hours, I was given an HNN error. Already 4 hours have passed, but nothing has changed. I'm upset. What's wrong with her .... broke .... ??? hung .... what to expect, what to do ???

Katya, according to your description, the problem is not entirely clear (at least to me). Your oven is almost the same as mine, but mine baked beautifully and worked for almost 3 years (until yesterday evening), but I have not the same problem.

Did you get an error when you turned off the button? And you tried to pull the plug out of the network, after all, the bread was finished? I read this thread - the girls write that sometimes the stove starts working normally after a while. Don't panic, wait and try again.

Katya, according to your description, the problem is not entirely clear (at least to me).Your oven is almost the same as mine, but mine baked beautifully and worked for almost 3 years (until yesterday evening), but I have not the same problem.

Did you get an error when you turned off the button? And you tried to pull the plug out of the network, after all, the bread was finished? I read this thread - the girls write that sometimes the stove starts working normally after a while. Don't panic, wait and try again.

I went to the store where I bought it. They said that it was electronics flew and they changed my bread maker. But I refused this model and did not regret it. Phillips chose. I've been baking for the second day and everything turned out very tasty the first time. And the crust matches the desired one.

Which Philips model did you change? There are like 2 of them (light and black), I looked at them a little.

Hello.
I bought this question in November 2010 Moulinex OW 5024. Bringing home I baked bread according to the recipe from the book "Milk Bread" it turned out the first time and the loaf is high and the bread is wonderful. The only thing that confused the fried, although I put the lightest crust. The oven worked quietly, a month later, when kneading the dough, there was a slight grinding sound, in the rest everything was fine. And since January, the stove hummed, insert the plug into the outlet and there is a pretty decent hum. before, I even set the timer with a delayed baking so that in the morning there was a warm bread, but now I don't put it on because of the hum. And now, in general, the bread has ceased to turn out, the rest are all the same. And the bread does not turn out even when there is no smooth crust with torn edges at the top with pieces and cones. and just did it yesterday.
Can you advise anyone who had such problems?

Uv. Alyonka! Try testing your bread maker with a dough machine. Sent to your Email.
Test in an attached file from the "Repair and Service" journal, page 55 of the journal. The article is called Moulinex Bread Maker Diagnostics.
View the file with DjVuViewer. The article will be viewed on page 71.
The test checks all the units of the bread machine.
Based on the test results, everything will become clear.

Could you please post this article here. I am sure many would be interested. The stove also fell silent - suddenly a month later.

[sid2857]

Could you please post this article here. I am sure many would be interested. The stove also fell silent - suddenly a month later.

Read here
https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=36855.20
Knock on PM sid2857

BOUGHT MULINEX 200036, AT THE FIRST USE IN BAKING MODE STARTED CLICKING SPONTANEOUSLY, PLEASE PROMPT WHAT IS THE PROBLEM? IT MAYBE IT'S TIME TO RETURN THE STORE! THANK YOU!

[IRINA KOV]

IRINA KOV
In my HP in the "Baking" mode, clicks are also heard periodically (but not at all often), I somehow do not attach much importance to this, since it clicks, then it is necessary! Since June, it has already been clicking, and despite this it works perfectly (t-t-t)!

My Mulka (6002) is 3 weeks old. Bakes great.
But today I noticed that it was humming, it looked like a transformer. I didn’t notice this before (maybe I didn’t pay attention?).
The question arose - is this normal?
Owners of such HP, please respond - how are you?

Today they presented HP to Mulya 2033, so when you turn on the network, a sound like a transformer is heard ... live someone is this normal?

I have 6002. It works like a clock for almost a year. If you put your ear to the stove body, you can hear a subtle background noise of 50Hz.

Thanks for your feedback

And I had it so right away. And recently this noise began to be heard even two meters away ...

Hello dear! I have such a problem. My Moulinex 5024 bread maker was purchased a month ago. Yesterday I noticed that one of the mixer shafts, or what they are called, I don’t know correctly (I’m a blonde) is loose. Is it necessary or necessary to carry it for repair? The stirrer remains in the bread, initially it was not. She began to notice that she was mixing badly, but she sinned for flour.

[Morkovo4ka]

Morkovo4ka check if the corresponding knot in the bucket rotates easily by hand, if it is tight or with a backlash - service under warranty

I inserted the bucket into the oven and it can be easily rotated, only literally 45 degrees or even less is just scrolling ... Did I understand you correctly?
Now I just put the dough, so the bucket is so cowardly in different directions

[Morkovo4ka]

Morkovo4ka drag to the service

Today I took my stove for repair, stopped kneading the dough. It is very insulting because she is only 4.5 months old!

Hello! After the last use of the stove (kneading dough), a pin comes out of the bucket, on which the mixer is attached. Can you please tell me why this is so (the second sits tightly) and what is the threat?

So I handed over my Mulechka for repair.
Yesterday the motor stopped working: there seemed to be no noise, no sparks ... nothing.
I turn it on, but she is silent ... 5 months after the start of operation ... it's a shame.

peace be with you!
Annette --- what is the threat?
replacement of the bucket / repair in the service

however, you can use it like that - the inconvenience is that you have to lay food with a bucket inserted into the stove and refuse a late start

So I handed over my Mulechka for repair.

And after waiting 45 days, I took the act in the service and went to get a new stove (mulinex). And while I was waiting for my repair, I bought a Panasonic 256. Now I have two stoves.
Panasonic bakes bread, and Moulinex makes snacks and pie dough.

[Olenka82]

Olenka82 , and what was the problem, you were told? (like the symptoms of our stoves are similar)
By the way, I was already warned that most likely they would not be able to find the necessary parts (this is if the engine burned out)
Mulinex does not have warehouses in Russia, and is unlikely to have time to arrive from abroad.

[Olenka82]

Olenka82 , and what was the problem, you were told? (like the symptoms of our stoves are similar)
Mulinex has no warehouses in Russia, and is unlikely to have time to arrive from abroad.

These are the personal problems of the company, let them study the zopp and change or return the money!

In the act they wrote that the engine was covered, the buyer was not guilty.