Bosch food processor - cuts into cubes!

Send my parts (cube cutter). Issue price 3,300. It will be possible to test it only late in the evening, the report will be in the morning. It was funny when the guys on the SERP started asking me: "What are the differences between the 29,30,40 models?" In services, you see, as in stores, they don't really know the difference. They just climb into the computer.

Yesterday I installed and tested a cube cutter from MSM 5529 on MSM 5530. Perfect fit. Everything is cut, nothing clings, does not jam. So if anyone thinks will fit or not, then do not hesitate. URAAAAAAA !!! Now I have a pro cube too!

Yesterday I made a vinaigrette with a different row of potatoes. She cooked in a uniform in a double boiler + cooled it near an open window (-10 C overboard) and put it in the refrigerator for several hours.
In the evening I took out a cut, I was already prepared to do it with a knife and Oh, a miracle!

The test potato was cut without problems with a Cube, respectively, all the rest was cut in the same place.
No "snotty smear" was found on the cube cutter, except for beet juice.

[In general, the thirst for cube cutters overpowered and the ribs inside the rod were brutally grinded]

I have a 5540 combine. Inspired by Matyuni's example, I ordered a cube cutter attachment.
At home, trying to attach a nozzle to the combine, I realized that it does not fit the bowl
Part number 0305 has a rod at the bottom that does not sit on the central pin of the removable bowl. Not a combine, but a bowl.

It turned out that there is a thread inside the rod of part 0305, the ribs of which prevent it from sitting on the bowl.
In general, the thirst for cube cutters overpowered and the ribs inside the rod were brutally grinded
After the performed operation, the cube cutter nestled in the bowl and everything worked fine.

[Skazi]

In general, the thirst for cube cutters overpowered and the ribs inside the rod were brutally grinded
After the performed operation, the cube cutter nestled in the bowl and everything worked fine.

Skazi, bravo! there is nothing to expect favors from nature, we must take them ourselves !!!! Well, you are great, you are not taken aback! I would have sobbed over the nozzle for another week until I decided on tough measures

By the way, I previously read in the subject that the nozzle does not fit on earlier models, precisely because of these ribs - someone was conducting an experiment ...

Hello Uv. forum users.

I have a problem. I live in Germany, Berlin.
I climbed everything, the entire Internet, nowhere can I find this harvester on sale.
Google, oddly enough, finds, but not everything in my region.
I suspect that this model is not meant for Germany simply.
Are there fellow countrymen who found where to buy it? Online store or real store?

I will be glad to receive any information

[Skazi]

Skazi Strange! I do not sit down only if the insert with knives (cubes) is not opposite the loading hole. But this is protection from the fool, that is, if you put it right, then everything sits amazingly. Perhaps you really have an earlier model, since the bowls of the 5540 and 5530 are the same.

Hello. Thanks a lot to Anastasia and everyone, everyone who gave good advice here. On one of the forums (I don't know if I can write on which one) there was a link to Temko here. So on February 12 in the evening I began to get acquainted with the messages. Yesterday I reviewed 40 pages and most of the video materials. And yesterday I became the owner of the "cube". Have already tried Olivier. There is practically no waste. Potatoes got more or less, but there is not much to choose from. Generally happy as an elephant. I will try everything else and unsubscribe

This is Siemens in Ukraine. MK 55290,55300,55400. The differences seem to be purely decorative, at least the bowls, the attachments are the same as Bosch.

This is Siemens in Ukraine. MK 55290,55300,55400.

yes, but we have Boshi 5529, 5530, 5540

I remembered !!!! it is in the Baltic States, he walked like Siemens !!!! the girl seemed to be from Riga wrote that everything was searched, and there is no Bosch 5529, and they have Siemens 55290!

forever !!!!!

I don't know if this will help you, but someone wrote above that in their country (like Israel?) this model was like Siemens ... 29. Can you try to look through Siemens?

Hurray, I found it !!! Indeed, we have an analogue of Bosch Cubix - Siemens MK55290

Free sale.
If someone suddenly needs a link to an online store in Germany, then:
Thank you all for your help

I used a whisk disc many times. Everything was fine. Yesterday I had to beat the whites. I put the disc on the holder, I also checked whether it sat down well. She turned it on and heard a grinding sound, quickly turned it off. There were plastic shavings on the disc, and a deep scratch remained on the bottom of the bowl. She took off the shavings, checked everything again and started it again. This did not happen again. And I also began to arbitrarily raise the lid from the blender nest, I need to press it and then the combine starts working.

[Boo Boo]

2 Boo Boo So you put food on the disc or first the food and then the disc?

Always on disk and everything was always ok except the last time.

And I also began to arbitrarily raise the lid from the blender nest, I need to press it and then the combine starts working.

My lid also began to move away. I noticed that the pin on the lid, which presses on the button, is somehow greasy. I wiped it off with a paper napkin, the lid stopped snapping off. Try it, it might help :).

I used a whisk disc many times. Everything was fine. Yesterday I had to beat the whites. I put the disc on the holder, I also checked whether it sat down well. She turned it on and heard a grinding sound, quickly turned it off. There were plastic shavings on the disc, and a deep scratch remained on the bottom of the bowl. She took off the shavings, checked everything again and started it again. This did not happen again. And I also began to arbitrarily raise the lid from the blender nest, I need to press it and then the combine starts working.

Everything is exactly like yours with a disc and a blender lid + sometimes a disc or un. the knife sometimes flies up during operation and grooves are formed on the longitudinal projections of the holder. Girls, who tried to grind ice in a plastic blender bowl?

Boshik's instructions say in some recipe - put ice cubes. I haven’t tried the ice, but I crumble strawberries and other fruits regularly frozen with a blender - it copes in 5 seconds, only it almost tumbles on the table - for the first time there was an impression that the bowl would fall apart nafig, so it was sausage.

I continue to report on the use of the combine.
I diced raw vegetables for borscht (potatoes, carrots, beets, onions) with a dicing device - everything is very good. True, quite a lot of the last potatoes were left in the grill. With its cleaning, I worked a little. But this is due to inability - it was not possible to immediately push the cubes with the device).
Shredded cabbage with a double-sided cutting disc - coarsely into borscht (due to carelessness) and finely into salad. I was satisfied. Grated carrots on a salad with a terek disc - finely (you will probably have to buy a nozzle). In the evening, she kneaded the yeast dough with a multifunctional knife. Everything is very fast and high quality. Nothing was left on the walls of the bowl - it didn't stick. Grated apples on a double-sided grating disc - large (I wanted smaller).
Yesterday I tried to juice 4 oranges. In principle, nothing special. It was a little necessary to get used to the pressure of half an orange. The juice splashed slightly, but I wiped it off at the end of the work without much difficulty.
Of all that has been tried so far, only the citrus press is not particularly impressed. It will be easier for me to manually squeeze a couple of oranges.
Everything is cleaned very easily. After the juicer - a pleasure! I am very pleased with the purchase and the time saved, even more so.
And about additional disks - someone asked. See page 30 for instructions on which and what they are for.

Everything is exactly like yours with a disc and a blender lid + sometimes a disc or un. the knife sometimes flies up during operation and grooves are formed on the longitudinal projections of the holder. Girls, who tried to grind ice in a plastic blender bowl?

So you also have a mess with the utility knife and disc, or rather with their attachment to the rod. Today my cube did not start at all. I all bowls and this and that, and the answer is silence. It turns out that the cover of the nozzle on the blender is skewed - the lock works. You have to hold the lid with your hand and shove the vegetables with the other. The people spoke about this a little earlier. Probably have to return this marriage

You have to hold the lid with your hand and shove the vegetables with the other. The people spoke about this a little earlier. Probably have to return this marriage

It's a shame that troubles with a blender nest cover are becoming massive! Do not even think, if there is a desire and opportunity, return the combine to the store and not for an exchange, but for a return. You won't really help yourself with this, but suddenly the next buyers! Maybe in the event of a massive return of the marriage, the company will constructively come up with something else or another lid or other blocker! If I were in their place, I would generally remove the blender from this combine!

In general, with such a massive marriage, I would further recommend that potential buyers think 10 times before buying this model of the combine and possibly refuse it. It's better to save money than to regret buying later! Alas, the model is new and apparently not yet fully finalized !!!

Colleagues, advice is needed! ... in 2 times my silicone gasket, which is in the "cube" nozzle, burst. ... So, what do you think, is the presence of this gasket essential? If so, can you have any ideas how to replace it? I think that contacting the service for this small thing is useless and you need to get out yourself.

Probably, in comparison with other problems, this does not seem very important to many, but ... it is unlikely that there are "extra parts" in the combine. My gasket also torn apart - though not after 2 times of use, but after 2 months of operation of the combine in general and the cube cutter in particular. Since this was not the first thing that happened to me, and all sorts of little things like such a gasket are clearly not a warranty case (or am I wrong?), Who solved this problem how? The harvester is working, the cube cutter is regularly supplying vegetables in cubes, but still?

[Lydia]

Probably, in comparison with other problems, this does not seem very important to many, but ... it is unlikely that there are "extra parts" in the combine. This gasket also torn for me - though not after 2 times of use, but after 2 months of operation of the combine in general and the cube cutter in particular. Since this was not the first one that happened to me, and all sorts of little things like such a gasket are clearly not a warranty case (or am I wrong?), Who solved this problem how? The harvester is working, the cube cutter is regularly supplying vegetables in cubes, but still?

Lydia, I am unlikely to help you with my answer, and in fact, this is probably not an answer to your question in principle, but still I will quote from another resource about the silicone gasket - I have not found other answers yet:

"06-01-2010 / Ken
If there is such an opportunity at the service, then it is better to put a new gasket. This silicone insert is needed purely so that moisture does not get on the mechanism, and so it can work without it. I myself discovered this insert by accident when I tried to insert the nozzle into the bowl with force, I still did not understand then, this is a joke with arrows, and I almost broke it myself. When you expose the arrows on the bowl and on the nozzle like this (> <) (sorry you can't put a photo), then the nozzle easily and without problems fall into the bowl, the main thing is to do everything without effort.If you do not set the arrows correctly, then this silicone insert will block the nozzle itself, and it will be almost impossible to plant it in the bowl, or, alternatively, you will simply tear it. "

But if it's true, write a massive complaint to the manufacturer about this snap-off cover? On the internet. And all the "victims" to subscribe. There are already a lot of us ... I will not return my Cube, either, precisely because in this case it is easier to come up with something than bother with returns and repairs. But this is not the case ... Let them at least take care of future customers, since we have carried out such mass testing for free (not even free of charge, but at our own expense!)!

On 5530 -2 pins with teeth are latches, and the lock is a small pimp on the side. If you wish, you can stick a toothpick or a match there.

At 5530 -2 pins with teeth are latches

We have a pimp. But these two pins, where are they?

In the center, opposite the blender drive.

Exactly! Everything is the same as on 5529 for me. But why then do many people still have a lid?

Exactly! Everything is the same as on 5529 for me. But why then do many people still have a lid?

The lid is fundamentally unfinished. I also have a Bosch 2200 combine, so there is no blocker on the blender lid. Only a lock on the bowl and bowl lid. And for 4 years now it has been working reliably (not counting the truth of the marriage of plastamass) And the new Bosch cube is walking all over. As you put the bowl, the block with the motor sways. And this is the pedantry and accuracy of the Germans?

On 5530 and 5540, the cover is opened with a button.

Hello everyone))) After reading you, I really wanted a cube cutter and a grater for dranniki. There is only one, but, I have an MCM2220, will they fit it? If so, where can you buy them, especially the cube?

Hello everyone))) After reading you, I really wanted a cube cutter and a grater for dranniki. There is only one, but, I have MCM2220, will they fit it? If so, where can you buy them, especially the cube?

Hello! Neither a cube attachment nor a grater for chippers will fit your model - you have a bowl, where they should be inserted into a completely different, smaller diameter.

I also almost cried on the eve of my birthday after I decided to try whipping cream in a food processor. This is for sure, they do not seek from goodness. All my life I have been beating with a hand mixer, it is much easier to control this process there, but in a bowl it is really more difficult to do it. So when whipping cream in Bosik, the main thing is to stop in time

I was going to buy it as a gift to my mother ... I called today the Internet store with the question: if suddenly the same story with marriage is in the bowl, then whether it is subject to return / exchange or how, they said the following phrase: well, this is an already used thing (with ).
Now I don’t know. I understand that not everyone comes up with a marriage, but it will somehow be sad if it appears. The feeling that it’s easier to buy a cow ... Besides, you can use it later for meat, but with the combine, as you can see, you can’t do much ... I really don’t know whether to buy or not.

I really don't know whether to buy or not.

Better then not to take it yet. Suddenly, later, Bosch will modify something in this model and there will be no such shortcomings, then it will be possible to buy. And they really won't be able to exchange you if the marriage doesn't come out right away. And he is unlikely to immediately appear.

I cut the potatoes with a crook and the microwave made a casserole. Itself was surprised how simple, and most importantly quickly

[Lika]

And I also adapted to cut vegetables in Boshik for future use for cabbage soup. I immediately cut a double portion of carrots and onions, fry everything and 1/2 in a cartoon, another 1/2 in a container. Also with potatoes and cabbage. I cut on a cube cutter. 1/2 in a cartoon, the other in a container for carrots and in freezing.
A ready-made portion for the soup - saves time and the "undercut" cabbage roll does not hang out in the refrigerator

Lika, and the potatoes in the freezer do not darken? I seem to have mastered freezing everything for a long time and use it with might and main, and froze the potatoes (already cut) - then I threw out half of the darkened ones. Or is there some trick here?

[Lika]

Lika, and the potatoes in the freezer do not darken? I seem to have mastered freezing everything for a long time and use it with might and main, and froze the potatoes (already cut) - then I threw out half of the darkened ones. Or is there some trick here?

No, it doesn't get dark. I put everything in a container with a tight-fitting lid. I add to the soup, NOT defrosting, in one piece.

No, it doesn't get dark. I put everything in a container with a tight-fitting lid. I add to the soup, NOT defrosting, in one piece.

Well, what not to defrost is understandable. My potatoes darkened right in the freezer, I got it out of there. True, it was frozen in a plastic bag, not in a container. Maybe the potatoes weren't very good? I'll try with another one.

[I have the same problem and it is a little annoying. I suggest you unsubscribe to everyone who has the same problem. Very interesting how massive it is]

In general, the cover of the seat of the blender glass has ceased to snap properly (although I hardly use it), and until you press it, the engine does not turn on. And during operation it can bounce off the vibration (well, not bounce, but slightly move away, which is enough for the inner button to weaken), and then the combine stops.

I have the same problem and it is a little annoying. I suggest you unsubscribe to everyone who has the same problem. Very interesting how massive it is.

Today I was looking at my round whisk disc, I kept thinking why it happened that he began to scratch me. It turns out that if you put it on to the end (gospidya, I forgot all the words))))), well, let it be on) the holder, then it turns out to stick out below this very holder, and accordingly scratches the bottom of the container.

Good day everyone! Thank you very much for this Temko) for a month now I have probably been getting on the Internet and choosing a harvester. oh, how much I wanted) but a long time ago, I saw an advertisement for this Boshik. and I loved the dice function so much. as she imagined how much time can be saved on Olivier alone) but still doubted about him. all the same, there will be more functions on other combines. and a couple of days ago I wandered into this forum in this Temko. I read - I could not tear myself away) I have not read everything yet. but all the same, I was inclined to choose a cubic cutting Boshik for me, the difficulty is that I have never used combines, so there are doubts ... there are so many different models. so many functions. but then I watched the video, and the photo, and the fact that nozzles if you can buy others) but I think for a start I have enough of these nozzles)
in general, today I ordered it in the online store. and now I'm sitting on my nerves) I'm worried. firstly, this is my first purchase in an online store .. so I don’t trust them too much. but still the difference of 400-600 UAH bribed me.
and I burn out with impatience) I want to feel it and try it)))
forgive me for writing a lot, but emotions are just overwhelming, and I wanted to thank you all for such a detailed description of the combine, its functions, for videos and photos ... for sharing the experience of using it .. I think it helped me not alone will determine the choice.
Well, now I'm all waiting ...

Good day everyone! thank you very much for this temka)
in general, today I ordered it in the online store. and now I'm sitting on my nerves) I'm worried. firstly, this is my first purchase in an online store .. so I don’t trust them too much. but still the difference of 400-600 UAH bribed me.
and I burn out with impatience) I want to feel it and try it)))
forgive me for writing a lot, but emotions are just overwhelming, and I wanted to thank you all for such a detailed description of the combine, its functions, videos and photos ... for sharing the experience of using it .. I think this helped me not alone will determine the choice.
Well, now I'm all waiting ...

Good afternoon to you too! I am glad that you wandered into our forum and all our materials were useful to you when choosing a combine! Do not be afraid to buy in online stores - I have almost all the equipment in my house bought in them! The most important thing is to slowly check everything upon receipt - and the device itself - be sure to let the courier turn it on! and the documents that are attached to it, so that all the stamps are and the warranty card is filled! So happy purchase and further use of the combine! Then share your impressions!

Now, before turning on the Boshik, I have a ritual: to move my hand, as if stroking, along the cover of the blender attachment compartment. So, just in case. Scared ... Although so far (mmm!) Nothing is leaving anywhere. But I still love him (Boshik).

I made minced chicken with Boshik knives (I didn't want to pull out a meat grinder because of one and a half chicken breasts) - with onions, soaked bread and an egg. It turned out well, however!

comrades, is there any thread of the international committee on consumer protection?
By the way, does anyone know how all sorts of automakers recall their cars, if there is a design error? what is needed for that? God forbid, a couple of deaths or the problem is solved a little earlier?

I only have an example of how Samsung recalled its expensive refrigerators for repair, here I wrote about it https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=28870.0

[Sweetka:]

Sweetka: "I often talk with technology, and stroke, and I can push painfully"

Yeah ... Remember: "Don't humanize computers. They don't like this passion"?

Dear members of the forum, tell me, please, in what sequence is it best to cut vegetables on Olivier? After all, you already have vast experience in cutting Olivier "into cubes".
As far as I understood after reading the forum, cooking vegetables in advance is also a very important point. I plan to boil it tonight, and tomorrow, as soon as I have a combine, chop it all up.
There will be guests - I want to do everything beautifully

Dear members of the forum, tell me, please, in what sequence is it best to cut vegetables on Olivier? After all, you already have vast experience in cutting Olivier "into cubes".
As far as I understood after reading the forum, cooking vegetables in advance is also a very important point. I plan to boil it tonight, and tomorrow, as soon as I have a combine, chop it all up.
There will be guests - I want to do everything beautifully

potatoes - the most special attention. otherwise, instead of Olivier, you will eat a burgundy mass :) although it is tasty, but no aesthetics. Personally, lately, I got a headache, first cut everything into cubes, and then cook for a couple. We like Pts. if the potatoes are not particularly starchy, then perhaps it will turn out to be boiled and cut into cubes.
good luck!

Hello lovely girls !! THANK YOU VERY MUCH!!! hooray! now I also have a cube !!! Can you tell me, someone seems to have ordered additional nozzles in Kiev, can you find out exactly where?)

my report: I have been using my Boshik for several days. cut potatoes and onions into rings with a disc - shredder .. it turned out well. and waste, oddly enough, there was almost no ... then baked in the oven with chicken. although the chicken was half thawed, I did not dare to shove it into the harvester)) I really wanted to see if he would make cubes out of it or not))) although I didn’t need small cubes) so .. interest was sneaking)
Well .. and yesterday I made pies with cabbage. I chopped the cabbage into cubes. the beauty turned out and also kneaded the dough with knives in a bosik. blooper ... I didn't really bother with the dough before ... then there was no time, then there was a desire ... but here the desire to cook, cook and cook again))) today I want to make pies again)) because yesterday I was preparing a small portion ... the cat also stole the last two pies ... and I was just thinking of leaving them for the morning ...
the truth is, when I started to clean the cube cutter from the cabbage, I thought I'd go crazy .. at first I completely forgot about the thing that came with the kit.to push through the rest of the food. then she took it, but still could not push it through. the solution was simple)) I first disassembled it, and then began to clean it. and holding on to the edge of this knife with cubes trying to shove the remains of cabbage ... she kept slipping out of her hands ... and then she took it, again inserted it into the hole of the disc, where it stands and pushed it without any problems, holding onto the disc. (well, or not a disk, as it is called there .. a plastic disk into which this nozzle is put on)
in general, the purchase is very pleasing and saves a lot of time

if there is an opportunity to buy a cube attachment, it is better to buy a 5530 or 5540. I bought a cube with a blender, but the problem is like everyone else's.

if there is an opportunity to buy a cube attachment, it is better to buy a 5530 or 5540.

only the cube attachment costs separately as half of the combine

So that the bottom of the thicket is not scratched with a disc for whipping, you need to cut out a small strip from the plastic cover ... I cut out two of them :)

Maybe one thing is enough ... I'd probably put two :) The lid closed normally and everything whipped ... without any scratches