Multicooker CUCKOO 1054 - steam problems

Nut, I have it and at a lower temperature it comes out very well.

No, I didn't ask about the temperature. Just during cooking, steam should come out or not, on the programs that I tried, steam comes out, somewhere more, where you can hardly hear - is this normal?

Ir, I answered about the steam that comes out.

My steam also comes out differently. Yesterday I cooked meat in a large piece with pre-frying and then with vegetables. So the steam was not released intensively during cooking and at the end. And sometimes he fucks so hard at the end. It is necessary to trace when it comes out stronger - with or without liquid

Anya, tell me the representative did not say whether it is dangerous to use with cracks on the lid? And what if they increase?

Just appeared, read all the messages.
As they explained to me, cracks do not affect the operation of the device, they are on the decorative panel. What to do with them in case of increase .... I don’t know
steam comes out more strongly with a high liquid content. When food is without liquid, so ... a light pshiiik ...

I asked my husband and he replied that the sensor is a little thing that reminds (I don’t know) of a large nut near the red wires in the middle of the "pimp" should go up and down.
now everything has reported
🔗
Yes, to unscrew the lid, you also need to remove the gray decorative panel at the handle. there, too, cogs - tongues. (this is for the one who decides to disassemble himself). in the photo above from another site, this is also written.

Ufff, reassured Thank you

Girls!!! Expensive!!!! Anyone who has questions .... contact me live on skype !!! I will explain everything that interests you! Zvezda-5697

I have a cookie for 1.5 years. There is a crack almost from birth. And today a new misfortune was added - the lid did not open. or rather, it opened a little along with the pan. I called the service, they say press harder on the lid, maybe the lock is jammed, and you will be happy ... I said that the plastic is weak. They tell me, don't be afraid, press! In short, I got a second crack. Who is to blame but yourself? Although I pressed lightly, I guessed that it could be so. But after all, advice was given in a specialized service ... In short, the lid opened itself, opening and closing the lid. I was delighted. She poured the broth, washed everything to celebrate and decided to steam clean. The cover is jammed again! Here I will go to the servicemen. What will be the summary, I will write. In general, Koreans will never become Japanese. Then the price should be adequate to the plastic on the lid and servicemen.

After reading the entire branch, she took her glasses and went to examine her cuckoo. The saucepan is, of course, battered, but not fatal. A crack on the plastic - a crack or not, I don't know. I will not say that the crack is just like a junction of two halves, but it seems to me that it was from the very beginning. On the release of steam: I never saw it, I just turn on the cuckoo and leave. I come up after a ku-ku, if the porridge is delivered, the cuckoo calls - stir the porridge. That's why I can't say anything about the couple.

[Beetle extractor]

Beetle extractorContact the service ...... You are from Moscow: girl_skakalka: Check out the thread about Kukushechchi in the Trading House !!!! Everything will be decided

I have a cookie for 1.5 years. There is a crack almost from birth. And today a new misfortune was added - the lid did not open. or rather, it opened a little along with the pan. I called the service, they say press harder on the lid, maybe the lock is jammed, and you will be happy ... I said that the plastic is weak. They tell me, don't be afraid, press! In short, I got a second crack.Who is to blame but yourself? Although I pressed lightly, I guessed that it could be so. But after all, advice was given in a specialized service ... In short, the lid opened itself, opening and closing the lid. I was delighted. She poured the broth, washed everything to celebrate and decided to steam clean. The cover is jammed again! Here I will go to the servicemen. What will be the summary, I will write. In general, Koreans will never become Japanese. Then the price should be adequate to the plastic on the lid and servicemen.

1. To open the lid of the multicooker, before opening the lid, turn the handle to the "OPEN" position. And only then you have to press the key.
2. Please specify where the crack has formed? And where did the servicemen advise you to push.
3. If you don’t understand the cuckoo, come to the service center at the Moskovsky department store, we will help you without turning into Japanese.

Today I went to the Moskovsky department store, called the store's help desk, but they know nothing about Kuku's service. Where can I find a direct telephone service? Before that, I talked with the service indicated in the guarantee and Roma (on Mayakovskaya), they repair Bork and Cook, they gave unqualified recommendations, I absolutely do not want to be repaired by them. On which floor of the Moscow one should I look for service? Thank you in advance.

[Service of multicooker CUCKOO]

Service of multicooker CUCKOO

All questions can be asked on the site 🔗

Service maintenance will also be rendered in Russia, 🔗

If need be replace the pan, or something else 🔗

Attention! You can always ask a consultant by phone in Moscow about the technical characteristics and operation of the Cuckoo multicooker:
+7 (967) 235 -97-20 (daily from 10:00 to 18:00).

Dear users of multicooker Cuckoo CMC-HE1054F, in connection with your complaints, we would like to inform you the following:

Please send all data to the Customer Service Department of the Trade

More details: https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=167898.0

Thank you! But I don't understand why write to the service mail? In any case, they will tell you to bring the pressure cooker. By the way, I found a service in the Moscow department store. I'll go now, then unsubscribe.

Good afternoon again! We arrived at the service, they spun the cuckoo for us, cleaned it, it was very dirty where it was impossible to wash it (between the lid and the decorative panel), the rubber band was replaced. Perhaps, if we were vegetarians or ate one rice, it would be at its best, otherwise professional cleaning is necessary. The guys are good fellows, neat, they did with us, shared their best practices and recipes. For cracks on the lid, nothing, that is, the factory jamb, can not do anything yet. They have extra. pots, but no handles. I didn't take it, mine is still in good condition. In short, my problem was solved by cleaning, which I am very happy about

[Beetle extractor]

Good afternoon again! We arrived at the service, they spun the cuckoo for us, cleaned it, it was very dirty where it was impossible to wash it (between the lid and the decorative panel), the rubber band was replaced. Perhaps, if we were vegetarians or ate one rice, it would be at its best, otherwise professional cleaning is necessary. The guys are good fellows, neat, they did with us, shared their best practices and recipes. For cracks on the lid, nothing, that is, the factory jamb, can not do anything yet. They have extra. pots, but no handles. I didn't take it, mine is still in good condition. In short, my problem was solved by cleaning, which I am very happy about

Beetle extractor Well, all's well that ends well. I can imagine how worried and nervous, but now everything is in order.

[Beetle extractor]

Beetle extractor, was your cuckoo under warranty or did you pay for cleaning? Mine is almost 2 years old!

I have been philosophical about everything for a long time - there are bigger problems than buggy technology. About the guarantee: it used to be 2 years (for me), but grease and dirt do not fall under the guarantee, the elastic band too, so we paid for the services.

Dear, help !!! They began to disassemble the lid of the cookies ...Do I need to completely remove the entire decoration panel from the cover? (which is large in color), it can't be removed for some reason ... SOS My beauty is lying all over ...

stopper - a ring on an iron thread in my opinion - removed from the valve?

remove the plate from the handle by prying it with a sharp one and loosen the handle screws.

Anechka, we removed the handle, and now we want to remove the large decorative panel (which says "closed-open") The large plate comes off along the edge at the back, and something holds it in the center ... And how to hook this panel from the front ...

I do not know. Are you asking for silver?

unscrewed the screws, but I don't remember at what moment - my husband is not at home yet - screws at the junction of the cover and the case. I will come and ask

Yes, I have a golden one (still old). In general, do you remember whether you need to remove this big thing at all, or look for bolts elsewhere? We have already detached the lid, unscrewed everything, only it itself (the lid) can not be disassembled to clean the inside ...
That's it, we dismantled the lid, now we will clean it ...

I didn't shoot: girl_skakalka: but I'll find out more precisely ..... I'll write !!!!

We have already detached the lid, unscrewed everything, only it itself (the lid) can not be disassembled to clean the inside ...

Girls, well, you give! Here are the extremists! Itself would not climb in life, it is easier to send my husband with a cookie to the service center (despite the golden hands of hubby). Unsubscribe how it went, pliz!

You will be extreme if the service center is far away

Yes, I have a golden one (still old). In general, do you remember whether you need to remove this big thing at all, or look for bolts elsewhere? We have already detached the lid, unscrewed everything, only it itself (the lid) can not be disassembled to clean the inside ...
That's it, we dismantled the lid, now we will clean it ...

Rimma and what had to be promoted? (and you don’t need your husband in the morning).

I unsubscribe !!!! Everything was disassembled (a colored piece, plastic, it was not necessary to remove it, in vain they suffered). Then my husband cleaned everything, the valve, etc. It seemed to me that nothing escaped in my cook, it turned out that the valve was decently clogged with food debris ... After cleaning and assembly, everything works !!!!! You can congratulate me ...
By the way, we understood why a crack forms around the steam release valve. There is a screw under the plastic, which is most likely pinched during assembly. And at a high temperature, the plastic cracks in the thinnest place. Some of the girls described this problem exactly like that, absolutely exactly.

[Rimma71]

Rimma71, accept my congratulations that everything ended well for you!

[Pilgrim73]

Pilgrim73, Thank you! Yesterday I drove my cookie all day! First she fried the meat, then stewed it, then buckwheat in a cooker, then chocolate in boiling water, then rice, in short, it works, my good !!!

[Rimma]

Rimma, I congratulate you for doing it on your own.

[Rimma !!!]

Rimma !!!I'm very glad that everything ended well !!!! Avoid using 120 * when cooking with vein

Thank you girls for your support !!!
And I never cook at 120 degrees ... But it still got clogged. The husband says: now we are not afraid of anything, cook as much as you want, what you want, we know how to clean!

Respect to my husband !!!!!!

At the multicooker, after the words "steam is released", steam does not come out, although there is steam during the cooking process.
You have to tilt the valve with something to get the steam out. What could be wrong?

I have the same bullshit. The service said that it was necessary to disassemble the lid itself and clean the valve inside (as Rimma71 did). I don’t trust my husband, I’ll go to the service, but in the fall, because now I have a rest all summer at the dacha. I just open the steam valve myself every time. Something like that.

And I need to clean the valve, but I'm afraid Mf is not an assistant to me even once and the service is far and unavailable. Girls, can someone show on Skype how to clean it? Or maybe someone already has a video?

Lena!!! Contact me !!!!!!

Tell me how many screws you need to unscrew to clean the lid, I see 2 under the lid and in the handle
What needs to be disconnected, what's under the lid?
and how to detach the entire cover from the case?

It would be great if someone showed a video or at least step by step draw a diagram - where are the screws, how to crawl there, what to unscrew - in short, everything is in order

[Neither manufacturers are representatives of any responsibility, and even more so I do not bear!]

I can show ... but I warn you right away !!!Neither manufacturers are representatives of any responsibility, and even more so I do not bear!!!!!

I agree

zvezda! and you will show right in this thread what and how to disassemble? My cartoon is worth nothing. Semi-disassembled. The cover does not lend itself! : this: Provide informational assistance.

drove his to the service, 1000 rubles. and everything works
were told to do steam cleaning once a week, and if something "ran away", then immediately

Write in a personal or skype zvezda-5697

So this problem with the release of steam came to me. Steam comes out intensively during cooking, but at the end, after a warning, no steam comes out. I read the whole topic and realized that I needed to clean the lid. So? I just don't understand why this valve clogged up so quickly. The cuckoo is six months old, I don't cook often. I can't imagine how I will clean this cover. Now the cuckoo will stand in the way. And it's a pity to throw it away and have nowhere to put it. It would be better if this Multikuk did not sell them anywhere except Moscow.