Belevskaya marshmallow in Lequip D5 Eco dehydrator

thanks for the experiment ...

It's my pleasure..

ordered such

I still remain an adherent of my own framework. I like it that way. But if you buy 4 identical or 5 silicone pallets, then you can put them all in the dryer, they will not touch each other. I checked it on purpose today. In general, as it is convenient for anyone, do it. The main thing is that it would be delicious.

[gawala]

gawala,
I remember about the frame, tomorrow the master will come to us, we need to weld a small fence in the yard, I'll show him a photo of your frame and my tray, what if it works out?!?

what if it works out?!?

There shouldn't be any problems for a specialist. Cut off and that's all.

[Galina]

Galina, on the site there are 2 sizes S and L, tell me what size did you order? I also want to order a couple of such pallets for Travola, I don’t know how to determine the size, that is, S and L are how many? The dimensions of Travola pallets are 27x30 with a small reserve of 3-5 mm.

there are 2 sizes S and L on the website, please share, what size did you order?

Ilmir, I didn't buy from this seller. A size "Reply # 484 August 26, 2018, 22:57"
And it was bought not at all for Belevskaya, but for the fruit one. Two more pallets arrived yesterday, but they are below 0.5 in total height. They bought from different sellers, since one did not have 4 pieces at once. if not strange.
Well, okay, let the last two roll around, maybe where they come in handy.
I still won't make marshmallows on them. I'm more comfortable with a frame, with paper and other troubles. I am not looking for easy ways..



Deffki prick, who yesterday dismantled all the silicone pallets measuring 30 * 25 * 1.5 from a Chinese seller in German ibey? This size is no longer there .. Only 36 * 28 * 1.5 remains ..

[marlanca]

marlanca, Thank you! I can't get out of this computer on Ali ...

[Ilmirushka]

I also want to order a couple of such pallets for Travola, I don’t know how to determine the size, that is, S and L are how many? The dimensions of Travola pallets are 27x30 with a small reserve of 3-5 mm.

Ilmirushka, here

12102d4mOx7O & ws_ab_test = searchweb0_0% 2Csearchweb201602_3_10065_5920015_10068_5910015_5890015_10696_5940015_10084_5724015_10083_5970015_10618_5724315_10307_10301_5724215_5723517_5724115_5930015_10059_5724415_100031_5725015_10103_5725115_5980015_5724915_5990015_5900016_5724815% 2Csearchweb201603_54% 2CppcSwitch_5 & algo_expid = 1fa8a52a-193b-4b6e-a5d9-72f6ab7a6dc7-5 & algo_pvid = 1fa8a52a-193b-4b6e-a5d9-72f6ab7a6dc7 & priceBeautifyAB = 0 "target =" _ blank "rel =" nofollow noopener ">

pallets are 2 times cheaper at 231 rubles, the size is just for Travolka 31x26x0.9. Ali is full of them, look through it here

I'm still thinking, I found for my Summer resident a larger size 36x28 and with a quite budget price, but the height is only 1.5 cm, and in the Summer resident the height of the pallet is 3 cm, that is, my pancake is 2 times thicker. So I thought about it I need?
But if there was only Travolka, I would definitely buy it. In my opinion, in Travolka marshmallow will not work without this pallet.
Or you need the same frame as gawala.
gawala, did you make or buy a metal frame yourself? Where then?

Did you make or buy a metal frame yourself? Where then?

The husband did it himself. The idea was mine. Stainless steel frame. Welded. Made to fit the pallet. On the first pages I showed this frame 2 or 3 pages. Take a look if interested.

[Lyi]

LyiThank you, went shopping!

[gawala]

The husband did it himself. The idea was mine. Stainless steel frame. Welded. Made to fit the pallet. On the first pages I showed this frame 2 or 3 pages. Take a look if interested.

gawala, all clear. But where can I get a stainless steel? Maybe someone somewhere will come across something from which you can then bungle the same frame, whistle, if cho ...

[marlanca- Galya.]

But where can I get a stainless steel?

marlanca- Galya.... tell us about your idea.

Deffki prick, who yesterday dismantled all the silicone pallets measuring 30 * 25 * 1.5 from a Chinese seller in German ibey? This size is no longer there .. Only 36 * 28 * 1.5 remains ..

Galya, I confess, I took the last 2 pallets.
And I ordered 2 on aliexpress. There will be an opportunity to compare them in terms of quality.

I confess I took the last 2 pallets.

Well, I say that one of ours ..

I ordered it on aliexpress. There will be an opportunity to compare them in terms of quality.

The quality is the same for sure.

Girls, I want to share the idea of ​​a frame until I have a suitable one .....)))
I took a sliding square frame for cakes, got into the pallet perfectly ... ... it is much more convenient and smoother to do in it, maybe someone will find the idea useful ...)))

share the idea of ​​the frame

[marlanca]

Girls, I want to share the idea of ​​a frame until I have a suitable one .....)))
I took a sliding rectangular frame for cakes, got into the pallet perfectly ... ... it is much more convenient and smoother to do in it, maybe someone will need an idea ...)))

marlanca, I liked the idea very much. But I cannot find frames of suitable sizes. Share the reference, where did you get yours and what size is it? And then I can't understand, I found the frame: it says sliding frame 30-58. Do I understand correctly what this means 58 length, 30 cm width? And this does not mean that I can get the dimensions I need 31x26, since I do not know the dimensions of the edges of this frame, otherwise only welding?

[Lyi]

Lyi, I have a square shape, like this ....)))
I took it here ...

🔗

Girls, choose:

[marlanca]

I have a square shape, like this ....)))
I took it here ...

marlanca, Thanks for the link. The website contains dimensions 28x16. That is, I misunderstand that this is a shape only 28 long and 16 wide? Do you need to understand that this shape is a 28x28 square or can it be transformed as 28x16?
What kind of dryer do you have?

Girls, choose:

Olga VB, thanks for the links.

[Lyi]

Lyi,
I have a Lequip IR D5, the same as Gali ( gawala,), yes, it is this frame in my photo, it can be from 16x16 to 28x28, it expands ...

gawala,

You murderer Galya .....

the same as Gali (gawala,)

I'll just clarify. I have two Lequip dryers. but one usual, in which I always make marshmallows. And the second one with infrarot, with sun-shadow modes. like Gali.

Murderer

Well, like that ..

[Lyi]

LyiYou can see your dryer. And then for a request about ,, Summer resident ,, Internet issues only ,, Summer resident ,,. They want to present me here, "Wonder Woman," in connection with the fact that it will be useful to me. So I think to use it on the pastille, there are square trays without a hole and high sides. True, it is vertical.
What are you making the marshmallow on? Gawala and marlanca on Lequip IR D5: horizontal loading, infrared heating, air blower, and height adjustment for pallets with the ability to put them less.
Gal, sorry for the offtopic. But here, after all, those who have already made marshmallows have experience, so to speak.
I didn't manage to level it well on Isidri, and because of this, it is somehow thick at the edges, thin in the middle and as a result not beautiful, although everything eventually dried out. In the oven, you have to rearrange the baking sheets, you need to make mesh and adjust the gap when closing, since you open a lot - the oven stops working. Of the minuses in the oven, this is still a fairly powerful unit and I think it eats energy quite a bit.

[Anya,]

Anya, I do in Isidri, I level with such a spatula.

it turns out quite smoothly

What are you making the marshmallow on? Gawala and marlanca on Lequip IR D5: horizontal loading, infrared heating, blower fan, and height adjustment for pallets with the ability to put them less.

Anh I do only on the Shadow mode. the infrarot is not good for the job. It kind of fries slightly.
But more than three pallets do not fit. T. to the height does not allow. In silicone with a height of 0.9 cm, all five can be crammed. But in the future I will not make in these pallets my frame and the height of 2 cm are more to my liking.

sorry for the offtopic. But here, after all, those who have already made marshmallows have experience, so to speak.

Anya, everything is fine, you need to share any experience.

the infrarot is not good for the job.

Here is Gal, see what a valuable remark from you. So for our marshmallow, ordinary heating and blowing is enough. Then I will agree to a gift to me in the form of a “Miracle”

[Fifanya]

Fifanya, Anh, look, a marshmallow made in the sun mode. Pay attention to the right edge, it seems to be slightly fried. No, it's okay, tasty, but not that. Yet it is learned in comparison and experimentally.

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=501774.0

[4er-ta]

4er-ta, Tanyusha, I also leveled her, but there the height of the pallet is not large and there is a hole in the middle. Probably I have the handles from the pops, I didn't like it. But in the oven it is very good, and evenly and 2 cm in height. Although, I really love Isidri. Now she makes a fish for Timkin
gawala Gal, I realized that the infrared mode is not needed for marshmallow. Thank you

[Fifanya]

And you can see your dryer

Fifanya, since I purchased my dryer in very distant times, then it was called Dachnitsa 4M, now it is produced by the same Penza radio plant as Dachnik 4. Here it is
🔗
The plant itself sells it through dealers, if you open the "dealers" page on this site, you will find the nearest dealer selling these dryers. I'm happy with the dryer. It dries for more than 10 years, practically without switching off from May to October. Slightly slower the top pallet and the middle of the pallet dry slightly less than the edges, that is, very slightly. But she's dear.
The second dryer is Diva Lux. At first I rejected it, as I overturned a full pallet of liquid paste for marshmallow on it, washing it damaged, or maybe tore off the wires. But my family fixed it without any problems. Now she, like everyone else, plows as non-stop. It is more of a hassle with it, you have to rearrange the pallets and, about once every 1-2 weeks, unscrew the protective casing and rinse it. There is nothing scary, just more body movements. But she is 4 times cheaper than the same Summer Resident or as she is now called Summer Resident 4.
So do not be afraid to take our Russian non-killable dryers Diva, Wonderful and others. In the end, even if you kill one, you still have 3 in stock. See for yourself what is best for you: buy more expensive, but for yourself, a more "lazy" dryer, or spend a little more effort when drying, but buy cheaper, and much more.
Good luck with your choice.

[Lyi]

Lyi, Thank you, looked. She, as I understand it, does not have a fan, an infrared heater is worth it. It turns out that a dryer is needed for the marshmallow: 1. with high sides, if vertical loading or horizontal, since pallets (trays) can be removed for height. 2. The presence of an infrared heater, but without blowing, to dry evenly or with blowing, but the usual ten.
In vertical ones, you will have to rearrange the trays for uniform drying, with the exception of the summer resident with infrared heating, since it is without airflow and with the ability to set its temperature for different trays at the same time. Right?
Galyun, here are the remnants of marshmallow from different varieties of apples
Due to the VERY high humidity, now we have (constant rains) the pastille is no longer so porous. But she will not succeed in the abyss, we will eat. And the layers turned out to be multi-colored, since in one baking sheet there was a lot from one tree, in another from another.
I want it like yours. There is something to strive for. Thanks everybody

[Fifanya]

Fifanya, everything is correct. By and large, I would leave the main condition for marshmallow only high sides and, perhaps, the absence of a hole in the middle of the pallet, since when installing the pallet or moving it, you can accidentally tilt the pallet and spill its contents, or just cover the bottom with paper and fill it with it, move and stuff. Everything else is from the evil one, that is, any dryers will do. Well, maybe you still need good power (at least 500 watts) if you cook a lot of marshmallows at once.
Although it is still the best option when the heater and fan are located at the back, that is, nothing will ever spill or get littered. But this is purely my opinion.

[Fifanya]

Fifanya, An, well, normal candy. Soft, you can see it anyway. Sprinkle with powder, it will be absolutely great ..

I want it like yours.

Well, then you need the same apples as mine. By the way, they are completely tasteless, but sweet. for some reason they make the most delicious marshmallow. Airy, soft and tender. And I made it out of carrion. We still have to rustle around the neighborhood, we have a couple more trees in the ravine, we need to get there, pick apples and do it.

... By and large, I would leave the main condition for marshmallow only high sides and, perhaps, the absence of a hole in the middle of the pallet, since when installing the pallet or moving it, you can accidentally tilt the pallet and spill its contents,

I do it in Isidri, the hole in the middle does not bother me. The mass before drying turns out to be thick, I level it with spatula, nothing pours, even if you turn it. Made from Antonovka, the layer height turned out to be about 1-1.2 cm (it dried out quite a bit).

Made from Antonovka,

That's so beautiful!!!
Tasty from Antonovka?

[Galina]

Galina, yes, delicious and very fragrant, although Antonovka is still not quite mature.

[4er-ta]

4er-ta, Beautiful, light what turned out delicious, well done. So I still have pens from the pops. Well, I have already agreed to a present. On Saturday they will bring me to please, I'll tell you about this dryer and the marshmallow in it.

In my Isidri, all the trays are now filled with pink salmon, brisket and squid according to Timkina's carpacci recipe. https://Mcooker-enn.tomathouse.com/in...n=com_smf&topic=521158.0#

So I still have pens from the pops.

But why???

Because with Isidri, we cannot make the marshmallow so that I like it. My Isidri loves my men more. She has very meat, and fish, and the chicken is good for them. They walk around her, stroke her and until I see naughty hands they stick in there, and then they chomp quietly

From idleness I counted the calorie content of the marshmallow.
It turned out 156 kcal per 100g of marshmallow. (maybe wrong, but not much)
For clarity:
Right - 100 gr.
Left - 46g - 69 kcal.

[Galina]

Galina, thank you very much for the recipe and all the recommendations! I read all the pages, took note of a lot. I don't have such a dryer, I did it in Isidri. From 2.5 kg of apples, five trays were obtained. I cut one into four parts, missed and dried, we ate it with pleasure. And out of four layers, I dried it and made such a pie, decorated it with raspberries and presented it.

.
There are a lot of apples this year, I will experiment more.

donated.

Well, now I also do and give. What a flat, beautiful turned out.

I cut one into four parts, missed and dried,

Was it soft after finishing?

I don't have such a dryer

You can do it in any, even in the oven.

thank you very much for the recipe and all the recommendations!

Yes, not at all. The main thing is that everything works out and you like it.

[4er-ta]

4er-ta, Tatyana, a gorgeous marshmallow pie turned out!
For some reason I decided that such a marshmallow would not work in Isidri and dried it in the oven.
At what temperature did you dry it and how long did it take?

[Galina]

Was it soft after finishing?

Galina, it turned out to be soft, but not airy, about like a plump biscuit. francevna, Alla, Thank you! In Isidri it dried for 15 hours in the third mode. And for 4 hours I was drying everything together. Made on baking paper.

[4er-ta]

4er-ta, Tatyana, why on paper, and not on a pallet for marshmallow.?

[Alla]

Alla, I wanted the layers to be even, without rounding, well, and a little higher.

[Tatyana]

Tatyana, and cut the paper with the sides?
Oil on the paper?

[Alla]

Alla, paper without sides, the same as the grid, cut out on it. When it dried, I gently walked along the edge with a knife (you can use a toothpick) and everything went well. I didn't grease the paper, after drying I slightly moistened it with water and took it off. Filmed well, but not entirely, but in parts

Oil on the paper?

All, why are you going to smear with oil there? Forget!

In Isidri it dried on pallets and on paper, on paper it dried faster. It turns out softly, springs a little, but not airy, since the layers are thin, but maybe only with me.

I cut a circle of marshmallows into sectors.
I would like to make the layers higher, but I don't want to dry in the oven, I can't leave it unattended for a long time, but buy a dryer only for marshmallow
Isidri is fine with everything else.

All, why are you going to smear with oil there? Forget!

Galya, I forgot.