marinastom
I also compared the sizes, of course, only visually, there are no calipers for mnu ... Visually, I do not see any differences. Neither with nozzles, nor with lanyard rings. Of course, if I bought one nozzle or one of the three did not fit, then this is one conversation. And if all three, and at the same time, relatives have no problems at all, neither in the main set, nor in the additional ...
Svetlana777
Quote: Zima
And if you do not tighten it all the way?
This option will not roll at all, if you do not twist it all the way, then the dough will first squeeze the type nozzle into place, and then it will trample along the thread and then unscrew the figs. My dough clogs up the spaces between the nozzle and the outlet, sometimes it gets a little into the thread, and then unscrew it without frantic force
Quote: marinastom
Damn, it carried me for these attachments ...
"Everyone ran and I ran ..."
we are all like that, we will buy it, and then ... here I am, too, not to buy one, test it, and then buy it, ... but no, they will suddenly take it apart




Quote: marinastom
Visually, I see no difference.
they are, sooo not noticeable, but there
Marfusha5
Girls, the seller accepted my return. They prepare some kind of return label. They will probably have to return the nozzle. Interestingly, sending is paid? It is written that the seller reimbursed me the cost of the nozzle. But in paypal I can't look at anything, the account is limited. They ask to send the documents, but I have an inn with a repair in some box removed. Now you won't get it ... I wonder if the money will come to the account or immediately to the card? In general, there are many questions so far ...
caprice23
Quote: Marfusha5
Girls, the seller accepted my return
Congratulations!)
And what claim did you write that it does not work well?
Marfusha5
caprice23, Natasha, thank you. No, I wrote that the nozzle goes deeply and that the scraper cannot cut off the macaros because of this. And attached the pictures.
Ilmirushka
Quote: Marfusha5
and I have an inn with a repair in some box removed.
Irina, your TIN number can be found on the official. tax website.
Marfusha5
Quote: Ilmirushka
Irina, your TIN number can be found on the official. tax website.
Ilmirochka, I didn't know. Thank you. I'm looking at it now.
Svetlana777
Quote: Marfusha5
and I have an inn with a repair in some box removed. Now you can't get it ..
Irin, you can enter not an INN, but an insurance one
Quote: Marfusha5
I wonder if the money will come to the account or directly to the card?
to the account (well, at least I was credited to the account, and the amount was less than I paid (bribe for the transfer) and this amount was dangling, how much, I could not withdraw it without interest, maybe now it is different)
marinastom
And something doesn't answer me today ...
I'm afraid the admins will have to write ...
Cvetaal
So I never answered three letters, wrote to the support service
caprice23
Girls, took my nozzles from the post office today. 2 large seashells and square ones. All attachments fit well into place, level. I tried to do it quickly for lunch, everything turned out very well! It is not difficult to unwind, a little taut, but quite normal.
Here is:
Pasta machine Philips HR2355 / 09
Pasta machine Philips HR2355 / 09




I also realized for myself that the better to tighten them, the easier it is to unscrew them later. I have so




The shell is cleaned without any problems at all, but with a square one is more difficult. Soaked it, I'll see how it clears up later.
OlgaGera
Quote: Svetlana777
there is a difference in height by literally 0.5 mm
and if you saw it off on the leg? Not?
It's just that there are / are no attachments at hand already.
My elephant is already with children. Look.
Ilmirushka
Quote: caprice23
Here is:
Pasta machine Philips HR2355 / 09

Pasta machine Philips HR2355 / 09
Natasha, well, pretty girls!
Marfusha5
Svetlana777, Svetochka, thank you very much. Probably not immediately credited to the account.I'll go and see what the paper wants from me.

marinastom, Marish, I attached a photo with a deepening of the nozzle and a photo with a scraper attached to this case, which does not reach the nozzle and wrote that it was a defect. Can I attach more pictures? Or really, connect ebay? Once it is silent ... I did not answer, I just received a letter in the mail that the seller accepted the return.




caprice23, Natasha, very beautiful macaroshki. Can you write the dough again? Otherwise I won't find it.
Natalia K.
caprice23, Natasha, it turned out very well.
Scarecrow
caprice23,

The pasta nozzles are easy to read with a stiff dish brush. You poke on it, the bristles pass through the cracks, the dough is pushed out.
Ilmirushka
Quote: Scarecrow

caprice23,

Pasta nozzles are well cleaned with a stiff dish brush. You poke on it, the bristles pass through the cracks, the dough is pushed out.
Nata, I didn’t work after penne. I wanted to dry it and ... again, nothing. I had to soak it and knock it out with a toothpick. And yet, I have this nozzle split into two parts (it consists of two parts !, which I could not even suspect).
caprice23
Quote: caprice23
Soaked it, I'll see how it clears up later.
After 10 minutes I tried to clean it with a brush that came with the elephant. In principle, everything was pushed out normally by the bristles.




Quote: Marfusha5
Can you write the dough again? Otherwise I won't find it.
1 measuring cup under the knife Makfa TS + flour up to the mark egg and water. No flour sun.
Scarecrow
Ilmirushka,

))) Well, yes, it consists of two. It was just that they were blinded by the test and you did not immediately understand)). Soaking is even better. Not a problem, literally give 10 minutes in hot water.
marinastom
I tried to clean the square one right away, it didn't work. The next day I cleaned the dried up with my dental instrument. With difficulty, but cleaned out.
Rituslya
caprice23, Natul, and I also really liked your macaroshki! ZdOrovsky!
They are all smooth and neatly twisted. Handsome men!
Marfusha5
And I'm still fighting with the paypal ((
It is the inn that asks for, it does not allow to enter snils. I can't find the inn, but the tax service website says that the inn was not found. Vicious circle.
aniramka
We used to put a stamp with an inn number in our passport, do you accidentally have it there?
caprice23
If you freeze the rest of the dough, then how to use it later? Defrost first or throw it like that?
marinastom
Defrost. In the same place, as a rule, it remains a little, defrosts quickly.
Marfusha5
Quote: aniramka
We used to put a stamp with an inn number in our passport, do you accidentally have it there?
Not in the passport. I called the tax office, they said, just get registered again. Okay, I'll wait. Maybe I will. I do not plan to order more attachments in the near future. These are enough for me for now. We must also try to make square ones today. And then I received the nozzle a long time ago, but my hands never reached it. And Natasha made them painfully beautiful.
dana77
And call at work? Maybe even a former job
You will not find the inn on the tax website, it is now confidential information. Only if you have a personal account connected.
On public services, the TIN is usually indicated.
Ilmirushka
Quote: dana77
Only if you have a personal account connected.
so it's natural. I, too, zahaniril my certificate somewhere, registered at the office. my number appeared on the website and in my personal account.
Cvetaal
My package was found, I saw the track only on the receipt. But these tips are a big lottery, I got a marriage. It does not fit into the nest tightly, like a family, it dangles, as a result, it is problematic to tighten the front panel exactly. I managed somehow. An impressive gap was found on the right between the body and the nozzle, on the left - everything is fine. I started the car, literally in a few seconds I saw with horror how the front panel moved very far from the top of the case. I turned it off, tried to disassemble it, but it didn't work, I just couldn't unscrew the screws. I had to resort to pliers and somehow unscrewed through a towel (the scratches still remained on the handle). Found a bunch of crawled dough. The screw got stuck, too, with remarkable efforts, it pushed out just barely. I will write to the support service. I will get 2 more attachments soon.
Svetlenki
Cvetaal, Light, I sympathize very, very much. Something Vietnamese relaxed with the blockage of Russian orders. Very disappointing. You have a big elephant. I was already preparing for new masterpiece curly pastes in your performance
Cvetaal
Yes, Sveta, big. Our Vietnamese is driving the marriage. This nozzle is clearly curved.
caprice23
Cvetaal, Svetlana, what a pity. What is it then. I hope they will replace your marriage.
Svetlenki
Girls, if the product is the same, write to him that you will leave a negative review. They are afraid of it like fire! I always read reviews before buying. And it will warn someone against such a sad purchase.
marinastom
Listen, it's just some kind of kick! ..
I would like to scream like the driver of a stubborn ambulance in a Caucasian captive ...
Cvetaal, Light, hold on!
Svetlenki
By the way, within 1 month you will be able to correct your review on ibey upon request from the seller. Let him fix his jamb, send a new nozzle, and then it will be possible to change the review to a positive one.
caprice23
Quote: Cvetaal
The screw got stuck, too, with remarkable efforts, it pushed out
I had this, pushed, pushed. Useless. Then, without a nozzle, she simply turned on the machine for an additional run for just a couple of seconds, she turned the screw, a piece of dough came out and in the end everything was easily sorted out.
Marfusha5
dana77, the company went bankrupt, and before that it worked in Moscow, and you won't find it there. In the state services, too, does not find an inn. Nothing wrong. I'll leave it for later.

Ilmirushka, has registered both at the tax and state services, does not find the Inn. No problem.)))

Cvetaal, Light, I sympathize. Write to the seller and attach a photo, let the money return.
And about the fact that everything is stuck in the screw and neither here nor there. My shell attachment got very stuck when I made it on completely Italian tf flour. The dough was compacted, it became rubbery at the nozzle. I barely removed the nozzle, and the screw did not pull out into any, it was tightly stuck. Enabled scrolling back. The dough all got out back into the machine. Only after that I was able to pull out the screw. The dough was originally crumb.
OlgaGera
Girls, don't give Tatiana a reference in the sound box for attachments to the big elephant
julia_bb
Quote: Cvetaal
Our Vietnamese is driving the marriage. This nozzle is clearly curved.
Light, I sympathize. I wait for my spirals from day to day, now I will be ready to shoot on video and take photos, so that if anything, I can make a claim right away.
Natalia K.
Quote: OlgaGera
but do not give a reference from Tatyana in the sound for attachments to a large elephant
Look at page 502 for the answer 10022 in Tanya's topic.
Cvetaal
Quote: julia_bb
I’m waiting for my spirals from day to day, now I’ll be ready to shoot on video and take photos, so that if I can make a claim right away.

Julia, my spirals are normal, and pasta with holes (4 mm) is defective.

Ladies, thank you for your sympathy, I'm ready to write an angry letter, but I can't upload pictures. Not my day, obviously ...
Sofita
Marfusha5, I don't really understand why you can't just come to the tax office: take a coupon and write an application and get a copy of the TIN, in the tax office itself all the information and individuals and legal entities work independently or not. Even if a person has an individual entrepreneur or LLC, etc. TIN is not changeable and regardless of the place of residence and registration. Therefore, if once issued, then there he is, they do not report the number by phone (this is personal personal data, the law prohibits this) only in person with a passport at the tax office, they can provide a copy and give a certificate to be provided at the place of demand. If a person moves to a new place of residence, then he is obliged to leave the register from the old address and register at the new address, but the TIN does not change. According to this TIN, all taxes are charged, including the tax on housing, transport, etc. That is why it is definitely not in the tax office. Do not waste time looking, it is better in the morning before you just visit the tax office and immediately resolve all issues. So it seems to explain everything, I hope it will help you.
Marfusha5
Sofita, I have already ordered a copy, but I need to pay a fee of 300 rubles for a duplicate. I'll do everything tomorrow. Thank you.
julia_bb
Quote: Cvetaal
Julia, my spirals are normal, and pasta with holes (4 mm) is defective.
Yes, Light, I remember that you turned out cool spirals. I hope the normal ones come to me too ...
caprice23
Girls, I'm bringing you seashells. Made on flour tf + 0.5 tbsp. l. flour VS under the knife and water 73 ml.
What pleased us, from beginning to end came out beautiful swirling. I sent 8 things into marriage
Pasta machine Philips HR2355 / 09
Pasta machine Philips HR2355 / 09
Natalia K.
Quote: caprice23
and I'm bringing you seashells
Natashahow beautiful you turned out you will become a pro so soon
Did you cook square pasta?
caprice23
Quote: Natalia K.
Did you cook square pasta?
No, I didn't. Frozen. I'll cook one of these days.
And I decided to make shells on the water because the floor of the freezer is already in pasta. I decided to dry them
Natalia K.
Quote: caprice23
because the floor of the freezer is already in the pasta
And that there is no freezer yet? It's time to start it with pasta
caprice23
Natalia K., so I recently bought a freezer, but I never thought that I was buying pasta
Masha Ivanova
caprice23, Natasha! Do you have 4 shells on the attachment?

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers