Pasta machine Philips HR2355 / 09

[Galina]

they chew well

I would like to be thinner. Lan, let's get used to it)))




Galina, how do you fold the noodles in bunches interestingly. Do you freeze it? or do you eat it right away?

I would like to be thinner.

You are capricious ..
I have a foreigner chewing and not drinking.

how do you fold the noodles into bunches interesting? Do you freeze it? or do you eat it right away?

I twist it half a turn, but into the freezer. Very comfortably. It is brewed the same way, the taste does not change.

well ... hope died.
And I already ordered that ...

why are you messing around? I ordered a fine fellow, the thickness of all standard macaroons is the same, the difference is only from a small one, they are smaller (for example, a penne from a baby 6, from a large 7pcs, etc.) well, due to the speed of a large one, it probably sculpts them faster

You are capricious ..
I have a foreigner chewing and not drinking.

That's why he is a foreigner. And we need thin ones))) I will be more capricious than some foreigners

That's why he is a foreigner

Yeah. understandable .. but I didn't know ..

And we need thin

We would too. but that is what it is ..

why are you messing around?

no, not toil, but want to

no, not toil, but want to

it’s bad, but don’t forget to wash the main thing, Schaub pleased me a lot and plowed like an adult

I forgot to wash the baby

I forgot to wash the baby

not well, if you still have to redeem him. But what about zhezh ... konyakusika pee for his health. And he, apparently, did not like it (He took it and grunted at the first batch .. but we cured him

yeah, I'll rustle him with maracas

[Ilmirushka]

Ilmirushka, Ilmirchik, healthy macaroshki, yes! Do you feel a buckwheat smell in them?

Now I believe that you can mold them from any flour and with any additives. Small fellow! And even more so!

well, due to the high speed, it probably sculpts them faster

about the speed - it immediately seemed to me that Filya, on the contrary, turns the auger a little slower than Viva.
If anything, then definitely not faster.

[Rituslya]

great macaroons, yes! Do you feel a buckwheat smell in them?

Rituslya, to be honest, I'm not a gourmet like many here and macaroons are thick for them, and watermelons are not very sweet, and pearls are small, and roses are dusty ... , I did not see the taste of buckwheat, for me the main thing is to reduce the amount of wheat flour, but it turns out!
And yet, I ate these penne macaros with vegetable marrow caviar, the taste of which is quite rich, so ... everything was delicious to me!
I don’t understand about the subtlety, they are macaroons, why should they be as thin as possible, why chew something then ?! Vermicelli, I understand, in chicken soup you want subtlety, tenderness, and my penne boiled well, did not creep, did not boil, did not stick together! What more could you want? I do not know

Today I added to the flour the seasoning Aidigo Aromatic Shashlik Profi, 1 tbsp. l. for 2 cups in Filia, 2 large eggs + water, flour mixture TK, 1 sec, amaranth, sesame, spaghetti.
From sesame and amaranth flour, the dough is so dark, and from the seasoning it also turned a little green))
Spaghetti cut into 3 cm for the soup.
Soup on chicken wings, carrots, onions, then spaghetti noodles - light soup, there is a taste of seasoning, noodles of a pleasant "warm" color.

What still amazes me is that the pasta from the machine does not boil over, is dense, elastic, and has your taste.

[Irsha]

Irsha, well, great!

[Ilmirushka]

Ilmirushka, oh, not the right word, it's just a wonderful machine, many thanks to Sedne Svetlana for opening this car for us !!

We need a collective mind!
Today I took my attachments from the post office, all three in a sachet and in one box, next to it is inflated with air and a sealed bag.
Began to try on a typewriter. Shells first. I wrapped the ring in the same way as for native nozzles, without effort and there is almost two mm gap left - the nozzle is deeper than the ring. I measure the next and the third - the same. To get it flush, you have to make an effort, and turn it off afterwards - generally with difficulty ...
Something no one wrote about this ... Virgins, how are you? .. I'm worried, suddenly, what's wrong ... I'm already afraid to make macaroons.

My shells are level, but the native penne attachment sticks out at least 5 mm.

Nadya, is the ring tightly wrapped with shells at the end? Is the machine small?

The machine is small, easily wrapped. I got up like a dear)
Shells for 4 pcs.



Still, however, did not use

Wow...
And I was even upset about something. If you twist like that every time or your hands hurt, or the machine breaks down ...

And if you do not tighten it all the way?

So it will be inconvenient to cut: the plane of the products will be in a depression.

Oh, then of course. I thought that like my horns sticking out

Here is the native spaghetti:

Native Penne:

Vietnamese seashells:

What to do? Accept? Moreover, all three, more or less.

[marinastom]

marinastom, and will not it be pushed forward by the pressure of the dough during cooking?

[marinastom]

No, my shells are not so. Smooth and very easy to twist. I think we need to open a dispute, let the seller send normal

marinastom, and will not it be pushed forward by the pressure of the dough during cooking?

If it pushes it out, then the dough will be hammered into the resulting void. Maybe)

That's how I have, well, maybe 0.5 mm, but not noticeable.

[marinastom]

marinastom, Marina, it is necessary to open a dispute, I think. The nozzle is too recessed. Maybe for tape products of pasta this is not so critical, but for curly ones, how to cut them off if the nozzle is so recessed?

Damn, it carried me for these attachments ...
"Everyone ran and I ran ..."

added a little

Rita, a little, this is how much, otherwise I have not yet adapted to my pasta, I also think to add salt

[Deer pussy]

Deer pussy, Olenka, well, quite a bit. For example, for 200 grams of different flour I add one fourth of a teaspoon. Plus, of course, I salt the water.

For lovers of tomato sauce with spaghetti, I recommend the recipe

Chopped tomatoes in their own juice without salt and vinegar (preparation for winter salad and pizza) (Yuliya K)

It's just the harvesting season, you can stock up on tomatoes for the winter

[polliar]

polliar, Thank you! Also aimed at this recipe

[caprice23]

caprice23, I did a little last year, sterilized and stored without a refrigerator, in the room, they stand normally. For bolognese and delicious sauces - just what you need.

Finally, the second elephant reached me. Let me remind you, bought in Eldorado at a discount, like a product from a shop window.
The package is complete - itself, nozzles, measuring tubes, shovel, brush, documents, packaging. No questions at all!
The coolest: 1 - date at the bottom of 1729 (on mine, also bought in Eldorado last year - 1730); 2 - nozzles from Vietnam fit perfectly ... I haven't tried it yet.
I tried to put the ring from the first car on a new one, Vietnamese discs do not sit down. But there are no problems with native disks, neither on the first, nor on the second. So the disks are to blame after all? ..
What to do?..

What to do?..

Marin, open a dispute.

[marinastom]

marinastom, Marina, how are your screws in the first Viva? hold on?

Yes, I wrote yesterday, he suggested that I try again and write to him about the result.
I tried it ... Of course, the nozzle squeezed into place with the dough, but then I barely unscrewed the ring, only with a silicone mat I could. As luck would have it, and my husband is on a business trip ...
By the way, I tried square ones. Cleaning after - tin ...
Irish, while holding on ... T-t-t ...



In general, girls, my enthusiasm has significantly decreased ...

I, too, with the shell attachment after use, unscrews the ring with difficulty. But somehow it does not bother. And I twist it tighter than my family. But it gets up straight, not recessed inside.

Apparently, after all, it is non-native, there is non-native ...
With what force it tightens mine, I myself will not unscrew. And this is not the case, it should not be so.

Apparently, after all, it is non-native, there is non-native ...

Marin, and the attachments that you bought from T.A., how do they sit down?

while holding on ... T-t-t ...

mmm.
And my daughter and son-in-law Viva lives with a hole like that)) my son-in-law does not want to go through the whole city to the service, my daughter doesn’t want to make a hole in the pin - all of a sudden my husband moves out of the house, and I buzz. so that she drove him, maybe some denyuzhka will return to my card after all for a marriage-sss ...

Marin, and the attachments that you bought from T.A., how do they sit down?

Yes. otherwise we are still waiting.
But are they supposed to be "relatives"?

Marin, and the attachments that you bought from T.A., how do they sit down?

No questions at all! Fine!
Here, just, relatives, there are relatives ...

No questions at all! Fine!

That's great. And then I'm already starting to worry.

[marinastom]

marinastom, Marish. I have, if I'm not mistaken, the shells were also drowned. I had to tighten it up. Then she barely unscrewed it. I was afraid to break off the elephant's trunk, barely unscrewed it, in general, the ring did not unscrew at first. Maybe, since this is a marriage, open a dispute too? Girls, is it real if I received the attachment a week and a half or two ago? Or is it too late to open? And how to do it, if not too late? And, probably, the seller has already run out of shells? I need to take a look ...

[caprice23]

I believe that everyone who has problems should write. The more claims there are, the faster the promotion will be.
I wrote in the help / help section the product does not match the description.
Yesterday he answered me, today there is silence. I'll wait until tomorrow, it's Sunday after all.
caprice23,, Natasha and Marfusha5, Irina, write too!



Marfusha5, Ira, so what, that two weeks. Not two months.

caprice23, Natasha and Marfusha5, Irina, write too!

I have nothing to complain about. Now I tried to put on the attachment again, I put it on without any problems at all, I don't even need to pull strongly. Fits absolutely flush with the tightening washer (or whatever it is called). After cooking macaros, it unwinds with difficulty, but not critical. So I'm fine.

And my order was lost, not even in history, I had to complain, I'm waiting for an answer. Later orders will arrive soon, already in Moscow, and this one didn't even have a track, although there was an inscription: the order was sent.
Until today, there were 4 sent orders in my history, and today only 3.

And my order was lost,

Wow. Maybe the pro didn’t send it? Of course you have to write and complain.
My order is already in Moscow. Now I am worried that the nozzle fits.
Light, what kind of attachment did you order, in the order that was missing?

I wrote to the support service, they promised to give an answer on August 16.
Natasha, here is this nozzle: 🔗

and Marfusha5, Irina, write too!

Marfusha5, Ira, so what, two weeks. Not two months.

Marish wrote, thank you. We are waiting for what he will answer and whether he will answer at all.

Hi everybody. I haven’t been to Temka for a long time, there are still problems with the attachments. I went and took out my own, the attachments dress normally, compared them with the hair - it is slightly pushed forward, literally by mm, the flip flops are almost level BUT I have a problem to unscrew after cooking (I showed how the dough clogs, horror) I unscrew it with mad force and bad words. there is always a feeling that it has twisted strongly, but this is not true. I put it next to it for comparison - there is a difference in height by literally 0.5 mm, but this is enough for incorrect work. It seems that he made the first ones normally, and then, seeing the demand, he began to drive, saving on material.Even a microscopic cant means a lot to work properly