Multicooker Dex DMC-60 (reviews and discussion)

Why don't you all so stubbornly want to use search? Just type "pizza in a slow cooker" on top and that's it

It is enough to raise your eyes a little higher, we see: the topic "Recipes for Dex multicooker", there is a recipe for pizza.
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=103573.0.html

Girls, is it possible to put a saucepan from our deksik in the dishwasher?

Hello, friends! Has anyone encountered an E3 error (open or short circuit in the upper sensor circuit) How serious is the problem? Take it to the service or can you try to cure it yourself?

Do not treat yourself, take it to where you bought it, not to the service.

Why not service?

Because the small Dex equipment is exchangeable and not repaired.

Why not service?

If 24 months have not passed since the date of purchase, then you take it to the store with a sales receipt and a guarantee and they will exchange you for a new cartoon, which should also be accompanied by a 24 month warranty, or if they do not have such a multi now on sale, then according to you or change to another model or are fully obliged to return the money for how much you took it there.

Girls, good night! I'm a little off topic to you. How do you mix food when frying in a saucepan? I noticed that even when stirring in a saucepan with a plastic spatula, it is still like scratching the saucepan. But my shoulder blade was not perfectly smooth, but a little combed. I'm getting ready for a new cartoon, I want to buy accessories for it.
thanks for the answer

Will you answer me? can our saucepan be put into the dishwasher?

The instructions only say about the first time: wash with a special detergent, rinse with water and wipe with a soft cloth.

Silicone spatulas and silicone spoons. I just bought a silicone ladle, a colander and a large spatula. I have not only in Dex, but also in Panasonic, which I use every day for the 3rd year, there is not a single one, even a small one. scratches!

How do you mix food when frying in a saucepan? I noticed that even when stirring in a saucepan with a plastic spatula, it is still like scratching the saucepan. But my shoulder blade was not perfectly smooth, but a little combed. I'm getting ready for a new cartoon, I want to buy accessories for it.
thanks for the answer

Everyone buys silicone spoons, scoops, ladles. I bought at Epicenter.

Girls, good night! I'm a little off topic to you. How do you mix food when frying in a saucepan? I noticed that even when stirring in a saucepan with a plastic spatula, it is still like scratching the saucepan. But my shoulder blade was not perfectly smooth, but a little combed. I'm getting ready for a new cartoon, I want to buy accessories for it.
thanks for the answer

Olya, you have a wonderful online store in Mariupol
euromaster
Here many of us bought the spoons and spatula you need, and slotted spoons, and silicone tongs. The ladle was just not there when I bought, and the rest is. This spoon is a queen spoon

And those that come with plastic with a multicooker included, then they must be thrown out, they are bad. And do not take nylon, also not a fountain. Silicone only.
The owner of the shop there is a very responsible girl. You can pick it up there by yourself, no need to pay for the shipment. And the prices are very cheap compared to Epicenter, for example.

Tanya, I am now, such a good store nearby ... but I did not know ...
Special thanks for the queen, I will definitely buy it!
... I somehow had no idea to buy silicone spatulas.I thought that it was necessary to use only a plastic kit.

This spoon came to me in the mail, so when I pulled it out of the box, it just went nuts from its size and quality factor. I even have 2 spare ones, just in case, so that there will be enough buzz from using it for many years.

Hello, friends! Has anyone encountered an E3 error (open or short circuit in the upper sensor circuit) How serious is the problem? Take it to the service or can you try to cure it yourself?

Our multicooker started giving this error a month after the purchase. We had no opportunity to return to the seller.
They coped with the breakdown themselves: he moved away from his place, or rather, the contact was not even inserted into his place.
This contact had to be inserted into its place until a characteristic click, and it was simply attached during assembly at the factory.
And by the way, no seals were found. If you have some experience, it is possible to disassemble and check if all contacts are in place, not difficult.

Marina! Yulia V wrote that she washes her saucepans in the dishwasher, but I'm getting a point.

I also used to take glasses, and now I also wash them, both from Dex 60, and from a pressure cooker, and there they are of worse quality, and everything is okay!

Our multicooker started giving this error a month after the purchase. We had no opportunity to return to the seller.
They coped with the breakdown themselves: he moved away from his place, or rather, the contact was not even inserted into his place.
This contact had to be inserted into its place until a characteristic click, and it was simply attached during assembly at the factory.
And by the way, no seals were found. If you have some experience, it is possible to disassemble and check if all contacts are in place, not difficult.

Seals are not required. An experienced service technician will see that the device has been opened even without seals, and goodbye to the warranty. Well, I warned, if anything, and then as you know.
If there is an opportunity to return where you bought it, I see no reason to risk the guarantee.

Seals are not required. An experienced service technician will see that the device has been opened even without seals, and goodbye to the warranty. Well, I warned, if anything, and then as you know.
If there is an opportunity to return where you bought it, I see no reason to risk the guarantee.

I agree, if there is a possibility, it's better to return.
We didn't have such an opportunity. We called the store where the multicooker was bought, they, taking into account the circumstances themselves, advised to see what was inside, whether the contacts had gone away. In the event of a serious breakdown, we agreed to accept it under warranty. Fortunately, everything worked out. It would cost us half the cost of a multicooker to take it back to the store ... And also because of such a nonsense breakdown.

I will not open it, of course I will return it, since it is a simple exchange. Moreover, they have 60 available, judging by 🔗, there is also. It is surprising that since my two-month purchase, the price has increased by almost 300 UAH.

Our multicooker started giving this error a month after the purchase. We had no opportunity to return to the seller.
They coped with the breakdown themselves: he moved away from his place, or rather, the contact was not even inserted into his place.
This contact had to be inserted into its place until a characteristic click, and it was simply attached during assembly at the factory.
And by the way, no seals were found. If you have some experience, it is possible to disassemble and check if all contacts are in place, not difficult.

Tell me please, how did you find the very contacts that you left? It's just that in my previous 60-ke there was also something similar, only the error was E4. we were also advised to tighten the contacts. Her husband took it all apart. We did not find any contacts that could be clamped there. Where are they at least to know just in case?

[Lisenok_828]

Lisenok_828 Not I was doing the repair, but my husband. He showed me what was there, what went away. There was no need to clamp anything, it was necessary to insert the wires with a pimp into place. The process itself cannot be explained in words. My husband is an electronics engineer by profession, has experience in repairing equipment, he was engaged in a multicooker for the first time, he said that it was a typical case.: girl-th: It was a year ago, and can no longer remember what and how.

[Mona1]

Tanya, Mona1 , thank you for the reference!
Today I ordered everything in the store ... I'm glad to disgrace! In the afternoon I ordered, in the evening I took the order. No shipping charges They even got my favorite color scheme right! Now I am with spoons, spatulas, silicone mats ... only multi is not enough for complete happiness!

Marina! Yulia V wrote that she washes her saucepans in the dishwasher, but I'm getting a point.

Yes, mine, and with a powder, not a gel, and from SV too

Hostess, tell me, are the Dex 60 and 65 bowls interchangeable?
I want to order a cup for my 60-ke, but on the site I need only for 65-ke.

no, they are different.

Girls, I have never cooked jellied meat in our deksik.
Somewhere here in the subject already read that on languor (I can not find). The question is the cooking time and when to put the bay leaf with pepper immediately or at the end?

I have already cooked several times, first I brought everything to a boil on the stove, then I washed the meat and the leg, put it in a slow cooker, added spices right away, a little salt, then you can add salt, put it on simmering for 8 hours, in the morning a transparent tasty jelly, added garlic I disassembled the meat and poured it on plates, I remove the fat with a napkin in the plates, we don't like it, it should be absolutely clean.

[pour cold water and boil over high heat on gas]

And I cook first on Stew, then on Stew. So more boiled meat comes out, on one languor it came out oaky, although it seemed to be set for 8 hours. And it's not about the meat, we cooked half of the pork leg after the second run using a different method and it turned out super. I did this:
Clean the pork leg. Place the meat and bones in a saucepan and soak for about 10 hours, changing the water periodically. Then pour cold water and boil over high heat on gas.
Drain the boiled liquid completely together with the foam. Then she washed the meat and bones well with cold water and put them in the Multiu, poured boiling water and for 2 hours - for Stewing... (When it boiled, I opened the lid, let off some steam. And half an hour before the end of the Stew, I salted it).
Then, after extinguishing, immediately exposed Simmering 7 hours and went to bed. In the morning, while I woke up, it stood for an hour on the Heating.
I threw the carrots and onions whole an hour before the end of the languor, that is, early in the morning, but I think it was possible to throw them and peppercorns at the same time when I threw the salt so that I would not twitch at night.
In the morning I threw spices into a saucepan - a bit of rosemary, dried basil, lavrushka and a little of my mixture, which I make for rye bread (mostly coriander + less cumin and a little less anise and fennel) They add spice to the chill. And I closed the lid for another 20 minutes and continued to stand on the heating.
After I put the meat in the bowls and poured it with strained broth, sprinkled it with finely chopped garlic on top.

What do you think,
can you make jellied meat just by stewing for 4 hours?
boil on the stove, remove the foam, then pour boiling water in a cartoon and extinguish it for 4 hours?
We cook it on the stove and set it on a small fire for 4 hours, and then take it apart and fill it in?
Or is it necessary to dance with a tambourine, changing modes?

I have had a cartoon for more than a year, but only now I have "tasted" it and am switching to this method of cooking.
(I also train with baking)

It would be convenient for me to soak it in the evening, clean it in the morning, boil it in a cartoon for 4 hours, then disassemble it for lunch and pour it over.

it is possible and so, but it may not be very transparent, but what dances with a tambourine on languor? set it up for the night and sleep for yourself, in the morning they took it apart and filled

It's just that in the daytime the cartoon is usually busy preparing ordinary food, the jelly takes a long time for the cartoon, but at night, when the cartoon is usually not used, it's time for the chill, either entirely on languishing, or before leaving to sleep a bit on the stewing, and then on Languor and sleep as you please. In any case, this will all happen at a time when the cartoon is not usually in demand.

[Mona1]

Girls, thank you all very much for your help
I cooked jellied meat.
First, she brought it to a boil on the stove, drained the water, washed the meat and put it first on stewing as Mona1... At the end of the program, simmer for 8 hours overnight. Then another 2 hours on heating (while we got up, we had breakfast).
I decided to do so, because I cooked from beef. tail, and gov. cooked longer than pork.
When laid out in forms, the meat was soft-soft. Everything froze very well. Here is my first jelly

Our multicooker started giving this error a month after the purchase. We had no opportunity to return to the seller.
They coped with the breakdown themselves: he moved away from his place, or rather, the contact was not even inserted into his place.
This contact should have been inserted into its place until a characteristic click, and it was simply attached during assembly at the factory.
And by the way, no seals were found. If you have some experience, it is possible to disassemble and check if all contacts are in place, not difficult.

I wouldn't risk doing that. They replaced the dex bread maker with a new one and even paid for the delivery (the store). For this, there is a guarantee. And if now there is a serious breakdown (God forbid, of course) and suddenly after the intervention they do not change

Oh, what to look for there, there are only one page of topics, they removed the excess. Here it is, I wrote a year ago:

Did you soak the wheat in advance?

Girls, hello! I have not written for a long time, although I regularly read our forum. I want to ask your advice. I need to buy a cartoon for my eldest daughter. I couldn't find my 60th model. What do you recommend, Dex 65 or Redmond RMC-M60?

Dex 60 there are a lot of offers on the Internet. But if you still don't take 60, I would take 65. Maybe it's just that I am very skeptical of the Redmond

Redmond RMC-M60?

Redmond RMC-M60 is not worth it. I have a Dex-50 (old darling) and RMC-60 (I needed a 5-liter and with a multi-cook - I bought an advertisement and a promotional price) - I use it - I use it, but not that ...

[lily971]

lily971! The forum has a topic about the 65th Dex. The girls complain that the program is not working correctly - Buckwheat. We chose a friend just before NG, after all, we stopped at 60.

Julia, they didn't write anything about bonuses to me. 50 bonuses, and how much is it in UAH?

[Olyushka]

Olyushka,
thanks for the help. But there is some confusion with that site. Unable to complete checkout. By the way, when registering, the price is reduced by 200 UAH. That is, you can buy for 799 UAH. But is it possible?

The price is reduced for a registered user in this online store. And here in Vinnitsa it is reduced only by 132 UAH. But I haven't tried ordering.

I ordered my mom in this store on Saturday, by the way, there was no action then.
Brought yesterday, there is definitely in stock.
It is a pity if I knew about the action, I was in no hurry with the order.
And they were in a hurry because the DEX 60 is almost nowhere to be found ...

Thanks for the support . Yes, I'm not particularly upset, the main thing is that I bought my mother exactly the slow cooker that she wanted and already made her happy. And when mom is happy, what a frustration there can be. And the money ... I'll earn more. Although the little toad periodically crawls out and croaks)).
I have a DEX 60, at first I thought my mother would take 65, I was seduced by the manual mode from 30 degrees, but the glitches on the touch programs in the whole last batch were very confusing. Wait for the next batch ... it is not known whether the manufacturers will correct their mistakes, and if they correct, where is the guarantee that some others will not come out ... In short, I was already thinking for a month, until the 60th began to disappear from sale , and after the New Year freaked out and ordered.

Whoever has Dex-65 is the first MV, they don't want another, although it is buggy. And those who have 60 do not want to "play" with 65. I would be upset too that it doesn't work that way.

Girls from Ukraine, tell me who bought the spare bowls - where did they take them (if not very long ago), they are also ripe for purchase.
Do not offer stainless steel, I want the original Dex bowl.

Len, you really need a cup from 60, especially since it is perfect for your Scarlett.

Girls from Ukraine, tell me who bought the spare bowls - where did they take them (if not very long ago), they are also ripe for purchase.
Do not offer stainless steel, I want the original Dex bowl.

in our city were, it seems, 200 hryvnyas, if I need to look.
Yesterday I went to the local Voltmart, there are 60s, 1100-something, about 1200 UAH.

[Annushka]

Annushka, I just need a cup.
If there is where - take a look, please.

[Annushka]

Annushka, I just need a cup.
If there is where - take a look, please.

Yes, Lena, I realized that the cup. I'll see - unsubscribe. And I wrote about Dex 60 so simply, suddenly someone cannot find it. The bowl was not in Woltmart, it is not there, there is only on Dex 55 and 65, but in our local small shop.

Girls from Ukraine, tell me who bought the spare bowls - where did they take it (if not very long ago), it is also ripe for purchase.
Do not offer stainless steel, I want the original Dex bowl.

I bought here on November 15:

🔗

Girls from Ukraine, tell me who bought the spare bowls - where did they take it (if not very long ago), it is also ripe for purchase.
Do not offer stainless steel, I want the original Dex bowl.

Lena, on our forum Lika_n sells dex bowls.

Thanks to everyone for the help in the search, I have already figured it out, it turns out that the bowl for them is called Dip - 6, and not DMC-60 (I was looking like this
So now I have at least 3 options. And the difference in the price of 5-10 UAH does not matter.

[CurlySue]

CurlySue,
dexline- com-yua
section Kitchen appliances → Accessories for kitchen appliances
there are bowls for the "old" 60 dex (Saucepan for a multicooker DEX DIP-6)

And I cook first on Stew, then on Stew. So more boiled meat comes out, on one languor it came out oaky, although it seemed to be set for 8 hours. And it's not about the meat, we cooked half of the pork leg after the second run using a different method and it turned out super. I did this:
Clean the pork leg. Place the meat and bones in a saucepan and soak for about 10 hours, changing the water periodically. Then pour cold water and boil over high heat on gas. More details: https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=147095.0

Girls, you discussed the technology of making jellied meat so tasty.
I also love him madly, but my husband, alas, does not like jellied meat. It's not because I'm so bad at cooking. just my husband is picky.
I got pork asp after surgery on the gastrointestinal tract. I don't have any chicken ... I still can't get to the market to buy fresh beef ... by the way, which is better: legs? tails? Well, sooo want jellied meat. Holidays have passed - and again I have not tasted such yummy.

Yes, by the way, I ordered a saucepan from Lika - she found me herself - I don't know how. Probably one of you handed me over.

Girls, can you tell the girl Lika_n only deals with dex bowls? And how to find it, is there a Temka? I am looking for a 6051 brand non-stick bowl, it is 14 cm high, everywhere either 13.5 cm or 14.5, but there is no such thing. Thanks for the help.