Furniture for kitchen

but maybe there are also better quality plastic products ..?

But you can also order photo printing on plastic.

[V-tina]

V-tina, yes, yes, I saw these kitchens .. But in my case neither tiles nor glass fit .. I choose films from the apron or photo printing on plastic ..

But you can also order photo printing on plastic.

I think so .. I will consider this option as the main one .. well, I want to print photo on the apron))) I just didn’t tell me anything except glass that they rested on their film apron to match the color of the table top ..

[Yasmina]

Yasmina, the plastic will become cloudy over time, there are scratches on it from everything
as for the cutout of the holes for the sockets, then there is no problem at all
sockets are placed in a block and a rectangular cutout is made in the glass for the entire block
cut holes are not kitchen installers and manufacturers
and the manufacturers of the apron measure themselves, cut themselves, install themselves

well, I want to print a photo on an apron)))

Why not? It will not be too expensive for plastic, you get bored - you can always change it. The only thing is, if the cooking gas and the high-power burner are in the back, then you need to be more careful. I have a plastic skirting board along the wall - and normal (but the tabletop is slightly wider than sixty cm), and someone complained that it melted.

[tana33]

tana33, no, I'm in favor of ordering the first trial balloon in plastic.)) Now, in a fever, Yasmina will order something extravagant like that orange sunset, and in a couple of years tastes can easily change. Then he will re-order the glass. Plus, these cuts are all very expensive. ((

[Yasmina]

Yasminawhen you look at beautiful pictures, mentally imagine what you will always be on these countertops.
For example, if you like everything to be on the tables and always at hand, then the type and color of the wall panel is almost irrelevant.
And if you consider that all these things on kitchen tables, stoves, roof rails are most often multi-colored, then it is better not to add extra paints, but to make wall panels and countertops in the same material and color.
But if you keep the countertops empty (exactly you hold, but you don't want to hold , because you will still do as you are used to), then does it make sense to additionally color the kitchen? after all, there are also towels, and curtains, and walls, and a table-chairs with contents, and it is not colorless itself ...

[Yasmina]

Yasmina, the last one is just a dark film, in my opinion it looks very decent

But if you keep the countertops empty (you are holding, and you do not want to keep

I doubt that I will succeed and there will be a bunch of equipment on the table .. all the beauty will be obscured - and it's true .. hmm .. probably will have to stop at a plain apron matching the color of the table top ..

[Yasmina]

Yasmina, and it will be a good stop))))

[Tatyana]

Tatyana, probably)

[firuza83]

firuza83Yasmina, maybe something like this

[Cirre]

Cirre, very nice! But the refrigerator doors must be re-hung 100%

Girls! I am to you for advice!
In my new apartment I have gas, which is unspeakably happy, but not a stove, but a cooking stove and an electric oven. And this var has no cover.
What can you think of? how to replace the cover? After all, all kitchen assistants, in my opinion, should work under the hood.

[Vika]

Vika, I have a large cutting board - I use it when needed

[Tina]

TinaSo it is made of wood, this board. Probably it is necessary that there was something cool.

[Vika]

Vika, so the stove is turned off, but from the multi or grill the same - what will it do, but in general I have plans, as there is more time, to decorate this wooden board with ceramic mosaic only, I'm afraid it will become heavy

I don’t know. always write, put on a heat-resistant surface. But, I also have a large cutting board, so I will use it

[Vika]

Vika, many technicians just stand on the table and think nothing, for peace of mind, you can cover the board with foil

[Tina]

TinaYes, you can! Thank you!

And put it (board) directly on the burners ?? Well, I also have gas in the repaired ... I'm also interested _{By the way, I'll show you the kitchen very soon.}

Found this recommendation

Girls, here I am sitting in this Temko, I look - a photo only with a built-in stove. And I have a gas one, and it radiates quite a lot of heat from the oven. I will not change the stove, I like it, the oven is used every day for baking bread, stewing and baking meat, fish, pies. And now it's time to repair, you still need to make an apron. Now I still had light wallpaper. Kitchen furniture - walnut-like MDF, tabletop - marble-like. What else can you make an apron besides tiles and glass? Which color? I see nothing but light, almost white. Or change the tabletop too? Maybe you will come across something clever? Well, I have no design gift.

[Victoria]

Victoria, attach any heat-resistant material behind the oven, and the apron, in addition to tiles and glass, is made of the same MDF, plastic. I have both a gas hob and a cabinet, I settled on the stove all the same - and it is easier to care for and looks very dignified
here is another interesting option - it will work with a regular stove

Walnut-like MDF, marble-like countertop.

walnut of different shades happens, and marble chips too. What is yours?

[Tina]

Tina, an interesting apron at the stove, but how is it in care? I also have a gas stove and it must be separated with insulation, otherwise the furniture will deform. Especially if you bake bread at the maximum temperature in the oven. The tile is still responding well, but there are microcracks, not everyone has good eyesight 1

[Oksana]

an interesting apron at the stove, but how is it taken care of?

Oksana, I have an apron with tiles, in the photo it looks like a sheet of stainless steel, at first I wanted to do it, then we didn't find such a sheet anywhere, my husband offered to order such glass, but by that time I had just had this topic

[Tina]

Tina, Thank you. I would also like, most likely, tiles. But my husband ... wants nothing, grumbles, puffs. And he himself cannot make repairs, and it prevents me from hiring someone. I glued the wallpaper because I coped with my daughter without it. And our walls are terrible, we need to start for a long time. So I'm looking for something to do this faster, to listen to it less.

[Victoria]

Victoria, order them in the color of the kitchen and do not get fooled then, my husband does everything himself - and furniture, including, it's easier for me .. though, longer

Girls, hello again everyone))
I got to the choice of the tap. Can you please tell me what to look for?

[Lisichkalal]

Lisichkalalas my plumber said - choose by weight. The heavier the better.

Yeah, thanks, I get it.
And what else? ))

[Lisichkalal]

Lisichkalal, the rest is up to you. My sister really likes the faucet with a high bend and a switch lever from the inside. Like this

🔗

[Svetlana]

Svetlana, in no case should you take the mixer from silumin, it is a very soft alloy, all rotary parts are quickly erased and begins to flow from all cracks. You also need to choose with a ceramic cartridge and aerator (spray divider), as well as conveniently single-lever and with a swivel shower. In the photo that I offered as an example Chamomile1, shows a mixer with similar characteristics. The design is very varied.

Thank you so much!
And what is a divider for?

The divider is needed to save water.

Then, indeed, the right thing!

The divider is needed to save water.

And I thought that there would be no splashes.

[Svetlana]

Svetlana, I showed my mixer, I like it!
For tall objects, washing the sink is very convenient.

Stafa, I found which one I have, they are not sold in Russia like) PAINI COX 591 - no splashes, just at all, despite the deep sink. I think it depends not only on the height, but also on the internal structure. But tall items are easy to wash.

And I thought that there would be no splashes.

this is its purpose, water is well saved and special nozzles the truth is this, teskomovskaya, on a gander with a wider diameter, the third year in my kitchen is worth it - I like the fact that the stream can be directed in different directions by turning the nozzle

🔗
How do you like that? Ikeevsky.
Height 40 cm, isn't it a lot?

her, not high for me without a current drawer, there is enough height both for baking trays and under the AG bowl, and in general - the amount of unwashed dishes is limited only by the height of the tap - so

Just like in the picture, you don't need to position the mixer. Need a handle inside the sink.

About dishes is to the point
Well, mustache then, behind the sink and the tap I go to ikea.
Do you need this hose? really convenient? Or pampering?
And is the jet splitter sold separately?

Lena, right? Convenient ? Can you install it this way and that?

Girls, well, I can't imagine that I would order without you !!!!!

Need a handle inside the sink.

Now I have it this way, this opener handle really interferes with washing, I touch it all the time, the sink is not one meter long, no, we will do a little repairs in the kitchen after NG - let the husband do whatever he wants, and does the opener on one side, as in the previous mixer, it was cute.

I confirm, the handle inside the sink is inconvenient. While our repairs were going on, we lived with dad. He had a mixer just like this. I got confused. All the time I remembered with a "kind word" the one who advised me to install it.

The pull-out watering can is very convenient !! Pour the saucepans on the table so as not to put them in the sink, a basin on the floor or just wash the sink
And I bought this for my son, only smaller
🔗

[very low]

I had a previous kitchen mixer of this type, a very convenient opener - but !!!!! very low The gander is located, it is impossible - it interfered with the hands, every now and then threw it to the side, therefore, having seen the markdown (for the last copy), I bought a mixer with a high spout.

While our repairs were going on, we lived with dad. He had a mixer just like this. I got confused. All the time I remembered with a "kind word" the one who advised me to install it.

And deploy? It's that simple.))

But I breathed out straight when it was unrolled. Nothing flows from the hand to the side of the sink, eternal wipes and a duty rag have died out like a class, open and close with a slight movement of the finger towards you, away from you, nothing interferes with me in a tiny 45 cm sink.

Girls, the mother-in-law came to visit and said that the installer had badly silikonil the sink. There is a gap left and water will flow there over time. Is it possible to add silicone