Furniture for kitchen

Girls, thanks for the tap tips. So now with side handles can be considered. Oh, I'm completely lost))

[Svetlana]

Svetlana, and you take a photo and throw us here))) we will help))))

[iris. ka]

iris. ka, it is possible that the masters are telling the truth and have really broken up. And keep in mind that there were a lot of holidays in December and January.

[Svetlana]

Svetlana, and you take a photo and throw us here))) we will help))))

Here I will give a website better. The shop of leroy is merla. I bought a black sink in Ikea. At first I also picked up a black crane, but now I think that an ordinary one will be fine)
🔗

Is such a design convenient for the kitchen? Doesn't anything drip or get dirty from dirty hands on the base?
As for me, there are generally a lot of unnecessary gestures - to lift my hand high, I am used to regulating with one finger at all. Well, or close it with the back of your hand.

Oops, sorry, I thought everything was with top adjustment, but they were only on top. I beg your pardon. )

🔗
I have a different crane, but with the same lever. Expanded into the shell. After this, you can't force me to use others for any price.))) A couple of people also appreciated and applied them to themselves.

But here, in the subject, the girls were actively against it, they say, they used it at a party and basically did not like the turn inward. So all people are different.

[Lena]

fundamentally did not like the turn inward. So all people are different.

Lena,. I have a similar crane, only with a different section. True, the handle is on the right, since I'm right-handed. In general, changing the orientation of the handle during operation is not a problem at all: loosen and turn in the right direction. And my friend's handle changed its position, that is, it seems to be turned out now. So, in my opinion, you need to choose a crane according to completely different criteria.

I also have the same mixer in the kitchen. In my opinion, this (side) is much more convenient than vertical.

Here I will give a website better. The shop of leroy is merla. I bought a black sink in Ikea. At first I also picked up a black crane, but now I think that an ordinary one will be fine)
🔗

I have one in the kitchen. The crane itself also moves left and right. Very comfortably. Most often I open it with my wrist. Already three years as it is. Dripped in summer. I bought a detail (some kind of square, the store told me where I went to buy a new crane) for as much as 100 rubles!

Karoch, I was planning for a long time - finally, I came to take a picture.)) I apologize for the size, I would be glad to put thumbnails, but they do not allow it.







That is, you can see how this intestine can be bent, depending on the need - you can pick up a bucket and the divider will close, you can press almost inside the sink itself and then not a single spray will fly out at all. True, he used to be more stable before, but after 2 years of my constant bending, it seemed like a bit weakened. As soon as I don’t wrinkle it!))) Well, the mixer itself is a fine fellow - we have water in the tank in the attic, I try not to waste too much, so while I wash a few plates, turn it on and off twenty times. And nothing is leaking yet.

By the way, I already bought several of these ganders "in reserve" (they cost from 300 to 500 rubles), but yesterday I was generally told that they can be adapted to any mixer. Need to try. Because after such a little soul, I look at all the others with great suspicion.

Girls, how do you position the sponge and the pousda cleaner? Well, a rag for the poop-teas must be fixed somewhere so that it dries quickly and everything looks aesthetically pleasing.

[Mirabel]

Mirabel, I don't hold sponges, the washcloth often dangles inside the sink, the napkin dries out on the door handle, they are all horizontal, washing in the dispenser, which sticks out of the tabletop, you can see in the previous photos.If you get bored, then I take out just such a thing, there is a dispenser, and a bowl for a washcloth, and it looks "decent".

[Svetlana]

Svetlana, this is mine

used to be Ikeevsky, the cheapest, also quite satisfied, and I washed the dishes with my hands in front of him

[Bijou]

Bijou, Lena, I bought my mom such a gut. Apart from the mixer, I just changed it instead of a gander. Straight bastard from him! Wherever you want to bend it, you want a jet, but you want a little douche! And most importantly - it doesn't splatter on the sides! I love him dearly! I set myself more beautiful, so straight it infuriates, you bastard!

[Nirinka]

Nirinka,
Urrraaa !! I thought I was the only one ... non-standard. Which no one else likes.)))

Yeah, what is interesting, if before I somehow calmly perceived the standard ganders, they say, this is how it should be, then after that the Chinese girl is "enraged", this is true.

[Lena]

Lena (Bijou), this class is an ejecting thing. Does he mean for two years not completely "drooped" his head? I also want to change the gander at my mixer to such a bending one. Only it still seems to me that they are like spare kidnappings, than in the kit. But I'll probably risk it if it fits my mixer.

[Bijou]

Bijou, what is this non-standard one !? You are rational! Well this is a nice thing. I now want to part with my beauty straight. Although outwardly I like it Pts. And nothing can be screwed on it. I didn't know that nothing fits the Ikeevskys. So, for such a price, and such convenience and pleasure of use!

Ksyusha, we have him for 3-4 years and no problems.

[Irina]

Irina, which is directly sold as a spare part? They initially seemed to me softer than assembled mixers. But I will put it all the same. The main thing for me is that they come to mine.

Only it still seems to me that they are like spare kidnappings, than in the kit.

They are just different. Here on my very first little shower is silver and the holes in it are punctured in three rows, across the entire area. The spare one when I bought it for the first time was the same and the other one with black plastic at the bottom. There seemed to be two rows of holes and in general it looked rougher. I chose silver, like my old one. Recently I wrote out a similar assembled crane from an Internet store, but from another "manufacturer" - brass, one and a half kg, 1400 rubles, a silver divider, but alas, the holes are not continuous, but two circles closer to the center. Whether this changes the properties of the most flexible tube - I do not know.

Now you just need to find some pipes for sale and there will be beauty in general - everything else can be simply rearranged from the previous model.

They initially seemed to me softer than assembled mixers.

Already she went and squeezed her.) No, it seems exactly the same. Even more rigid than the old one on the sink - it fixes bends more tightly. I bent him so abruptly - holding on.

Well, great. Thank you. I doubted everything.

[Bijou]

Bijou, Lena, or you can link to your crane or at least its full name. I have not seen such in our stores

[Irina]

Irina, which is directly sold as a spare part? They initially seemed to me softer than assembled mixers. But I will put it all the same. The main thing for me is that they come to mine.

Yeah, spare part. We have a lot of holes with black plastic. ))) If a standard mixer will do.

[Bijou]

Bijou,

Lena, is this "douche" attached to the end of the tap? Did I understand correctly? If so, what is the correct name to ask in the store?

And thanks a lot for the citric acid advice. I washed all my flower pots and saucers from perennial scabs. A lot of scale came out of the iron too.

Ksyushk @ -Plushk @,

Ksenia, how clean and beautiful you are! And this is with the baby in her arms!

[Katya]

Ksenia, how clean and beautiful you are! And this is with the baby in her arms!

KatyaThanks a lot, of course, but this photo was taken in April 2012. Then (at that time) the youngest son was about a year old. I had time for everything. Now the web does not hang, of course, but I have less time.

[Katya1234]

Katya1234, I do not really understand you. This is a flexible gander with a "small" neck at the end.The shower is removable, with a switch, it can flow in one trickle in the center, it can be a direct shower as in my photos. Whether it is possible to wind a shower on another gander, I do not know.

Bijou, Lena, or you can link to your crane or at least its full name. I have not seen such in our stores

I can't find anything like my first one either, they are more and more in local shops, and not in online stores, probably. ((But there are many similar ones. You should search for something like "kitchen mixer brass spout flexible"Only prices sometimes pop up, well, completely inadequate! IMHO, it's easier to wander around the local shops-markets or look at the construction market - good is purebred China, that's why it is more common there.) And it's even better to ask around just one gander and screw a mixer on the mixer at home.

I ordered my last one before NG here for 1430 - 🔗
But this is a local shop. And there are wrong holes in the shower - two rows instead of three.
________________
Girls, you’ll laugh.)) Just yesterday we talked about what was left for me to dig, where not even ganders with a wound divider for 400 rubles are sold, but in general a flexible stick without a douche, as on you - today I go to a village store and see it on the shelf exactly what you need!

It turns out that it’s just someone stole a soul, and one "stick" was sold to me for 100 rubles instead of 340 written on it.))

Bijou

, I have seen such gander with a little soul, but the seller said that they do not fit all mixers. In particular, they do not fit Russian-made mixers.

for mixers made in Russia

Well, I also did not think that you can change, but the seller, and then in the subject said that you can wind up. It is necessary to check somehow ... Again, depending on what is meant by "Russian production" - my first such mixer is called Sanaks and has Russian citizenship. ))
In fact, the Chinese, of course.

In! Somewhere we had an ancient Soviet-style mixer with valves. We must try it on.

Try on, please, if not difficult

[Niarma]

Niarmabut it is not now. It is generally necessary to go to another house and plow on my husband. And now he sleeps between "days".

My answer is that there is no question of photo printing in the contract itself. It's like additional fabrication. Today it turns out that one wall photo print has broken, and the other corner is intact. Since I have been living with an almost finished kitchen for two months already, it turned out that the upper cabinets were too high for me to hang. It should be 5 cm lower. I say: "One hell, you will order a new photo print at the factory, do it already." They: "And the one that remained? How to deal with her?" Me: "Return it to the factory and have them cut it by 5 cm." Girls, is it really possible to do it at all, or can the drawing float?
I was already advised here to go and consecrate the contract in the church. It's just awful to wait since August and there is still no end.

Toffee, I was also going to sprinkle the kitchen with holy water when it was installed for 3 weeks. And now it's not all over yet. This is a feature of our area !!!!

Girls, and I kind of stopped with a tap on the German brand grohe.
Only until I have decided on the model, there are a lot of them there again.
Does anyone have these taps? They write that the quality is very good.

[Lisichkalal]

Lisichkalal, I have such cranes for fifteen years working without complaints!

I, too, have been in the bathroom for 15 years in May. Great taps. TTT

[Lisichkalal]

Lisichkalal, Light, in my last apartment and here this firm. Everything works great, buy it boldly!

Evechki, what can you say about Ikeevskaya inexpensive stainless steel.

I don't know what is considered inexpensive now, they basically changed the entire kitchen line. But my mother's stainless steel sink from Ikea is almost 10 years old, indestructible, very practical and easy to clean. It was not the cheapest, average in price. Just a deep square sink without a fender. Very comfortable, it would have been better with a wing, but we didn’t fit it because of the ventilation box.

Thank you, I understood, it remains to choose a model.

[Lena]

Lena,. I have a similar crane.

Ksenia, are you satisfied with this crane? High), how about splashing?

[Svetlana]

Svetlana, there is spray. That's why I want to roll his head off and change it to a flexible one.

Well ((I am approximately the same and choose (
Ksenia, how many cm do you have?

This is quite simple, 18 cm depth of the sink plus 22 cm height of the tap. 40 cm comes out. High?
🔗

Still like that, it is kind of more sophisticated, with a shower, with some kind of gadgets for saving water, but for me personally, a less comfortable handle. Well, there are several reviews that the shower then starts to move away from the tap a little, but mostly the reviews are good.
🔗

Or take a regular, medium height
🔗

Girls, what do you recommend? I am not sure about these taps, but time is already running out.

Ksenia, how many cm do you have?

To the place where the water is pouring 25.5 cm. The depth of the sink is 20. The splashes got out. But he has not holes in the diffuser, but slots, maybe because of this.

[Ksyushk @ -Plushk @]

Ksyushk @ -Plushk @, my relatives have taps on the sink in the same way, the sink is slightly different. I'm not comfortable at all. The crane is very small and you can crawl under it. In the middle, the crane is somehow more familiar and more convenient. You can turn it to the sides, but this one cannot. As you wish?

[Bijou]

Bijou, here is your crane much more pleasant to me.

this one cannot

Why not? Mine turns my head 360 degrees.

I bought a grohe tap today, the one that is not high. I don’t want spray. Although I wanted so much high and with a shower)
Now I choose the sockets.
I think 4 pieces and so 3 times along the apron. 12 pieces only on an apron, ok? Or knock knock at all? Maybe 3 is enough?

The crane is very small and you can crawl under it.

I understood what the trick is. did not immediately drove about what speech. My high. The total height is more than 45 cm from the bottom of the sink.

Svetlana, better more than not enough later.

I think 4 pieces and so 3 times along the apron. 12 pieces only on an apron, ok? Or knock knock at all? Maybe 3 is enough?

It depends on how much rubbish you plan to graze on the countertop all the time.)) Here, in my photos with a tap, blocks with sockets are visible on both sides of the sink. There are three on the left and four on the right. I was afraid that she would be missed. Figo! In the left corner, only the kettle is permanently plugged in, and now more and more a food processor. The third is never used - there is no more room for technology. Well, 4 pieces on the right could easily fit in one - there is only temporarily stuck in what is currently working from technology - a blender there, a meat grinder, a waffle iron, a pizza maker and the like.

But at the same time, the bread maker and two multicooker with an airfryer-lid have a permanent postscript in other places and are constantly turned on.

Nobody knows your conditions, desires and techniques, therefore, it's up to you to decide.

I think 4 pieces and so 3 times along the apron. 12 pieces only on an apron, ok? Or knock knock at all? Maybe 3 is enough?

For everyone who looks at our forum, the more the better!
At the same time, it would be nice if at least some of them had their own switches - for those equipment that are constantly plugged into the outlet, such as some coffee makers, kettles, etc., and for those that do not have their own switches, such as Kesha, princesses and others.
You just need to remember that the load on one line is not infinite, that is, both the voltage and the current in each line must be calculated in advance, and they must be taken into account when switching on. And then what's the point of having 10 sockets that all together can barely pull 1 device.

or of this type.

[Olga VB]

Olga VB, Olya! I am to you for help.
I have only 2 sockets on my apron, under the spoiler you show how you did it to yourself. Is this a kind of extension cord thing?