Furniture for kitchen

[Irina]

Irina, you can add silicone, the main thing is to crawl gently so that later the silicone does not shine

That is, you can't remove the sink, silicone it and put it back on? Need to climb into this millimeter gap?

[Irina]

Irina, call the installer better)))

[Irina]

Irina, I asked my husband - I said it is possible, but then it is better to clean out the old silicone, but your sink is already planted on silicone - you need to rip it off from it

call the installer better)))

great advice, who, if not the installer, knows how he installed it

Oh, thank you very much girls.

her, not high for me without a current drawer, there is enough height both for baking trays and under the AG bowl, and in general - the amount of unwashed dishes is limited only by the height of the tap - so

Girls, here I have the same one from Ikea, the current is white. Well infuriates straight, bastard !!!
How beautiful and so uncomfortable. Well, the spray is flying in all directions, I'm already bored!

Is it a bad choice after all?
Such different opinions (opposite

[Lisichkalal]

Lisichkalal, maybe only I was unlucky
Irsha I didn't write anything like that.

[Lisichkalal]

Lisichkalal, Svetlana, I will interfere in your conversation.
If you plan to install a water filter, then in order not to cut the sink and not have 2 taps, pay attention to the combined taps. With built-in filtered water channel. They are quite new, but many manufacturers already have them. Choose at a price that suits you.
We installed this. Very satisfied. Average height. Both tap and filtered water.

[dana77]

dana77, that's the idea! But it will not come to us soon, but if it comes, then the price will be hoo. And a hole has already been drilled under the second tap.

[iris. ka]

iris. ka, Irina, why not soon? Back in September, we delivered them to all branches in Russia. To Novosibirsk too. It's kind of near you. I barely managed to snatch myself. now the second batch has arrived. So you just have to search your networks.

They have been on sale for a long time. I installed one 2.5 years ago. I also have a tap with a high spout. Splashes fly in all directions. The splitter mesh is worth it, but it does not save you from splashing.

Well, how can I tell you next to ... Far from us. And if you take into account that a more or less decent store is 80 km away from us, then Come on, I say we have already drilled it.

[Ksenia]

Ksenia, I do not argue. These mixers have been selling for a long time, but now quite budget options appear.
This one has a medium height and I have a fairly deep shell. Therefore, I do not experience any inconvenience with splashes. Although they certainly are.

The sink that I looked after, again in Ikea, 18 cm deep.
What is the height of the crane then to take?
The filter, but I didn't seem to plan, we have tolerant water)), although there is a lot of calcium.

I also have a double. I am very pleased with him. I had two taps before, it's a horror for me. Ugly, uncomfortable. And when I saw it, they immediately took it, and put it in the old kitchen. The only thing that splashes. Ideally I would like to have it with a pull-out shower. But these have not yet been released ... Ehh

Such different opinions (opposite

I have not the same, but the same height, I wrote about the height, which is very convenient for me, but as for the spray, yes, if without a splitter, the jet falls from a height and splashes, I have a Tescom's nozzle screwed in.

Teskom's nozzle is not suitable for Ikeev mixers. I bought, I had to donate.

I also have a double. I am very pleased with him. I had two taps before, it's a horror for me. Ugly, uncomfortable. And when I saw it, they immediately took it, and put it in the old kitchen. The only thing that splashes.Ideally I would like to have it with a pull-out shower. But these have not yet been released ... Ehh

Unfortunately, they are unlikely to be released. The design will not allow.
I had a choice, either with a shower, but two taps, or one, but without a shower. I chose with a filter. I don’t regret it.
And I had a normal choice. I have been working in a sanitary ware company for 10 years

I have been working in a sanitary ware company for 10 years

Well, since with such experience, a specialist says that they will not be released ... then okay ... I will suffer. But you monitor, maybe they will release something interesting. Keep us updated

About the storage of pans. Drawers appeared on wheels like Chinese produced by "Polymerbyt" for about 300-400 rubles.

I have one, it stands under the sink with all kinds of "chemistry", I like

And what is his size, such a box? I see that 10 liters, but in centimeters?
Found: Dimensions 462x162x272

Girls, who has a bar in the kitchen? Is it convenient instead of a dining table?

I want to attach it to the wall without fanaticism and that's it.

[Marina]

Marina, I had a bar in the last apartment.
At first everyone really liked to climb on high chairs, and then they began to miss a normal table.
Here with a table and it seems sooo comfortable.

My son, having moved to my father's apartment (where there was a bar), after a while asked for permission to rent it, because he wanted to sit on normal chairs at an ordinary table.

[Marina]

Marina, acquaintances who set up a bar for themselves, say that they acted rashly.

[Marina]

Marina, the bar is handy when not as the main table!
Children love to snack on it. If there is a choice, then definitely a table!

I'm not going to put it high))) There will be no high chairs. The only difference from the table will not move but will stand still.

[Marina]

MarinaMarina, we, too, she did not stand at all high and sitting in single file at lunch after a couple of years was very tired.
Yulia advised you correctly, if the bar counter is plus to the table, this is not bad, but you will quickly get bored with this option of the dining table, IMHO.

[shurpanita]

shurpanita, I also do not recommend the bar counter, only in addition to the table, if the area allows. You will not relax with her over tea, sit sideways to a friend constantly, like in a bar, where she exists precisely for that, to drink a glass or coffee for one sip, eat an olive or a small sandwich and move on.

sit sideways to a friend constantly

Yes Yes! Exactly! it is not convenient.

Thank you girls for the advice! Bydu to consider tables)))

I had it in addition to the table, and still didn't do it in the new apartment - she bothered me, only interfered.

I had it in addition to the table, and still didn't do it in the new apartment - she bothered me, only interfered.

And I even stopped going to drink tea to one of my neighbors! You sit like a chicken on a roost, and the hostess is busy behind, now we drink more often!

The pull-out watering can is very convenient !! Pour the saucepans on the table so as not to put in the sink, a basin on the floor or just wash the sink
And I bought this for my son, only smaller

Elena, but you can find out the brand of your refrigerator, which is in the photo

[highly]

Elena, but you can find out the brand of your refrigerator, which is in the photo

You can't see the name here, but I'll try to guess by the handles ... At first it was either Toshiba or Sharpe. I bought mine already 8 years ago. Two years later, many firms began to copy this form, but then disappeared. Now we have few such models where you can find ... The chamber of the refrigerator itself is very roomy, but the freezer highly small...
Now I'll take a photo and post it ...

Here is a photo...

Girls, hello everyone! Again to you with a question)
There are sinks with a tap hole, and there are without. Then cut the holes yourself? In the sink or countertop?

[Lisichkalal]

Lisichkalal, it is very problematic to cut a hole in the sink, so either buy with it, or cut it out in the board.

[Svetlana]

Svetlana, if cut in the countertop, then over time, the countertop at the tap starts to rot and the tap falls. After all, no matter how carefully you use it, water gets there anyway.

[Svetlana]

Svetlana, the hole is cut, if the sink is stone, then it has special notches
if it is rusty, then cut it where you want
in ikea I saw a special tool for cutting a hole in the sink
the installer cut me through both in stainless steel and in stone, no problems

🔗

[tana33]

There are sinks with a tap hole, and there are without. Then cut the holes yourself? In the sink or countertop?

IKEA sells sinks without a hole and sells a special tool for cutting holes. Friends bought, they say that it is convenient and easy.

🔗

removed under the spoiler, since they have already shown))))
tana33,

Girls, thanks !!! Well, go crazy, how many nuances. I accidentally noticed that not all sinks have holes ((, and it is precisely in those that I chose them that they are not!
And also, I met a granite-rubber sink in the store. Good stuff ? Are these the very stone sinks that can crack if something heavy is dropped?

Yeah, thanks for the info about the tool. I'll show my husband, let him decide.

[Svetlana]

Svetlana, I don’t know about granite-rubber, but probably this is about the same as our granite sinks, they are only called stone or granite, in fact, it is an alloy of stone chips and composite
I have this one, before that there was a stainless steel
I don’t see much difference, I chose the color and depth of the bowl, I have a brown tabletop
would not find brown, would buy a suitable stainless steel of the required depth
a silicone mat for sinks was placed on the bottom of the bed, it is very convenient in terms of knocking dishes on the bottom, it does not rattle, does not scratch

[Tatyana]

Tatyana, PPKS! About sinks! The last apartment was made of granite, here it is stainless steel. both are normal, it's just that it's bigger and it's more convenient.
Girls, advise me too, please!
Now I have a kitchen and a living room as one whole, that is, an American kitchen, which I don't like in a prince, so I make a clear boundary between the 2 zones.
The hall has its own dining table, let's say, ceremonial. It is made of glass, you can cut something on it, knead it, roll it .. well, it doesn't work. In general, it stands far from my kitchen area.
They also bought a very small table for the kitchen and it stands on the border of 2 zones, but it is very far from the stove, kitchen cabinets and so on. if you move closer it looks unimportant.
I want some small work table so that I can remove it without problems, whether it is some mobile device, not heavy and compact, easily transformable, but with a work surface.
Any advice?

[Mirabel]

Mirabel, one of the cabinets of the kitchen series of a suitable size (you can with a door, you can just open it) put on the fixed castors, on top of the same working board as the main one, with a canopy at the edges for convenient work ..

Girls, what can you say about Ikeevskaya inexpensive stainless steel. By the way, it costs 99 euros here.
🔗

[Lisichkalal]

Lisichkalal, I have the smallest of this series. Ordinary stainless steel, if cleaned too zealously, scratches remain.