Anna1957
Friends, I will forgive the help of the audience now on this issue: the wall under the wire from the sconce was not pierced, because I did not know where the sofa would be. What options are there for the wire now? My craftsmen said about some kind of silk cord, which is made "for old outdoor wiring", but I have never seen this from anyone, and something like that does not inspire me. Maybe someone solved this problem in an accessible way?
lega
Quote: Anna1957
the wall under the wire from the sconce was not pierced,
Instead of a sconce, put a floor lamp, now it's full of different ones. There is a "two-level" light, it will be convenient to embroider. The socket wire can be pulled under the skirting board.
shade
Peace be with you bakers!
Anna--
You have a skirting board with a cable channel
You can use a cord - they are of the antique type - a sufficient amount
You can use a thin cable channel to match the color
Well, don't forget about torsion fields.
Anna1957
Galina, Gal, I don't need a floor lamp. I have a chandelier, sconce and table lamp from the same collection. I never ask general questions, agree




Quote: shade
Well, don't forget about torsion fields.
In order not to forget, you need to know for the beginning. What is that?





Quote: shade
You have a skirting board with a cable channel
Skirting board - yes. A piece above the back of the sofa strains me.
lega
Then, probably, the simplest is the cable channel. To disguise, you can stick wallpaper on its lid according to the pattern, we did this for the TV in the kitchen-dining room. It seems to me that the "semi-antique" cable does not at all fit in style with your interior.
Anna1957
Quote: lga

Then, probably, the simplest is the cable channel. For camouflage, you can stick wallpaper on its lid according to the pattern, we did this for the TV in the kitchen-dining room. It seems to me that the "semi-antique" cable does not at all fit in style with your interior.
In, what you need - stick the wallpaper on the cable channel. Well, I was sure that there would be a simple solution that never crossed my mind. This old man, of course, did not look at me in any way. Only my goats could offer that.
shade
Peace be with you bakers!

Galina I have like this - in the sense of wallpaper and not under paint--
We like it better

🔗
$ vetLana
shade, Anatoly, a good option. It's a pity I didn't know about him before. I don't like cable channels in rooms, in the office - it's normal, in the apartment -
shade
Peace be with you bakers!
So this is my CASH BOX under which I hid the wires \ well, if you change it, you don’t need to squirt the wall \ of course, the heads of the nails must be painted over with a suitable paint. but there is a drop on it, or cut out the dots from the wallpaper and stick it on the hat
in principle, if there are no children \ who strive to tear off the platband \ then you can break through by biting off the head then there will be no noticeable nails
the same can be done with cable channels
Here are the old photos even before pasting the casing with wallpaper - from the switch under the casing and at the bottom of the plinth channel into the cable - it's like a fish while mine were at the dacha, I started repairing and when we arrived they had already brought everything to mind - well, in the sense that they glued it down, well, so that it would be beautiful for everyone

🔗

🔗

Anna1957
I have a slightly different situation: a wire from a sconce will go down a flat wall. I liked the idea of ​​covering the cable channel with wallpaper. Unless my goats had time to throw away the rest of the wallpaper, as they did with the kitchen ones. Piled, naturally, on the ceiling.
Bijou
Anna1957, and what kind of wallpaper? And then in my kitchen they are so chunky that I tore them off if necessary and then glued them again. Do you know where I'm going?))
Mila56
Quote: Bijou
that I tore them off if necessary and then glued them again. Do you know where I'm going?))
Or you may not completely peel off the wallpaper.With a blade, draw over the wallpaper, say from top to bottom, peel off (embroider), that is, spread both parts of the wallpaper in different directions, grind, lay everything that is necessary, putty evenly and return (stick) the previously folded wallpaper. This cut (joint) in the wallpaper may be almost invisible.
Bijou
Mila56, exactly. But all the same, this requires durable wallpaper. And then I foolishly pasted such dead people in the bedroom that you accidentally hook your fingernail and already a hole in the upper layer. ((This is not an option to cut or tear off.

In the living room, they are durable, but with embossing - this only can be removed with a cloth. But without losses - they are also strong. But the lobby is so lovely that no matter how you cut them, it is generally imperceptible! There is a wall almost entirely made up of pieces. Even if you poke your nose - no one notices. )) I liked the wallpaper, but not enough. They bought in addition from another batch, but they are different, they put new ones on another wall. So she was shit with old shreds.)
Anna1957
My nerves are already at the limit. I'm not writing everything here yet. I'm afraid that I won't survive the option of tearing off the wallpaper. It is impossible to buy them - we changed the collection where I bought them.
lega
Quote: Mila56
Or you may not completely peel off the wallpaper. With a blade, draw over the wallpaper, say from top to bottom, peel off (embroider), that is, spread both parts of the wallpaper in different directions, grind, lay everything that is necessary, putty evenly and return (stick) the previously folded wallpaper.
This is a job for builders - "jewelers" and should be expensive. In addition, if you do it, then there will be a lot of dust and dirt, and there are already ceilings, wallpapers and upholstered furniture. Start repairs over again?
Bijou
Quote: lga
In addition, if you do it, then there will be a lot of dust and dirt
A few days ago, my husband just punched a channel under the heating cable in a damp corner.) A hammer and a chisel - and no dust and dirt.

But I agree, the shot was "in the milk."
Mila56
Quote: lga
This is a job for builders - "jewelers"
This is yes.
shade
Peace be with you bakers!

Well, it depends on which wall, if the internal partition, then it is not capital -
than shtrobat + vacuum cleaner. so that the dust does not fly

under the wire it is not deep and wide it is necessary --- I think it will not be noticeable
Mila56
Quote: Bijou
A hammer and a chisel - and no dust and dirt.
Yes, this is a more gentle and not dusty method, but more laborious, and when the punch is in operation, of course, dust and stones will fly.
$ vetLana
Anya, the only way to keep your nerves is to score on perfectionism. Try to set yourself up for a little compromise. (Don't scold right away, like "I know all this without you"). You are not alone through repairs, construction took place. I understand you very well .
Anna1957
Capital.
shade
Peace be with you bakers!

With capital it is more difficult, of course, but solvable - not fast, but possible

If you set a goal, then you can even wrap the noodles in rims vaasche it will be slightly noticeable
Anna1957
Quote: shade
noodles
What's this?





Svetlana, I already wrote that 10 years ago this master suited me for everyone - that's why I turned to him. And now - the joint on the joint.
shade
Peace be with you bakers!

Well, the wire is not round to pull, but flat for a sconce, then the cross section is not large
Anna1957
It is clear, also an option - to wrap with wallpaper.
lega
Quote: Anna1957
It is also an option
Not at all an option ... the collective farm will be, because it must somehow be fixed to the wall. What's the switch on your sconce?
Anna1957
Quote: lga
there will be a collective farm, because it needs to be fixed somehow to the wall.
Yes. And I don't remember about the switch, any can be done, probably. What do you need?
lega
So it already depends on the design of your sconce, they are different - with a cord (the switch is built into the sconce), or built into the wire, or with a separate switch, which also needs to be placed somewhere
Olga VB
Anya, now there are wires of all colors and shades. If this has already happened, then look for yellow or green - which one suits you best in this place, and I assure you that very soon you will stop noticing it altogether.
Anna1957
Olga, you can, of course, look, but I doubt that I will find a suitable color, they are very delicate and pastel there.
Niarma
Quote: Anna1957
I doubt I'll find the right color
take a white flat wire and paint with acrylic paint (Theory!), but you can try on a piece.
$ vetLana
We painted the cable channel from a spray can
shade
Peace be with you bakers!
REMOTE SWITCH-REGULATOR SAPPHIR-2503 VIKO

Remote control of lighting with any remote control that is at hand at the moment. Going to bed you do not have to get up to turn off the light, you can turn it off using the TV remote control.

Manual (touch) lighting control (in place of a conventional switch).

Smooth adjustment of light brightness. The choice of lighting level according to mood and circumstances.

Imitation of your presence in an empty apartment.

Smooth lighting on, extending lamp life.

Automatic shutdown of lighting after 12 hours.

Affordable price with a high level of quality, design and comfort.

Compatible with incandescent and 220V halogen lamps.
The switch is not tied to a specific remote control, it reacts to any remote control at the moment you need - just point the remote control at the switch and hold any button for a little more than 2 seconds. The switch will understand that you are addressing it and will begin to respond to commands! And if it is more convenient to manually turn on or adjust the light (for example, when entering a room), this can be done by hand.

Anna1957
Marina, but where do they even buy these paints? I finally do not understand them.
Niarma
Spray cans, in my opinion, are in car dealerships, but just paints are in goods for creativity
$ vetLana
We bought in Ob. Spray cans are sold in auto departments. This is car paint.
lega
Spray cans are better not needed, ordinary white acrylic enamel + color schemes, you can choose almost perfectly to match the color of the wallpaper in a particular place. You need very little, you can buy small bottles of paint in art stores. The packaging is large.
Olga VB
Quote: Anna1957
I doubt that I will find a suitable color, they are very delicate and pastel there.
Now any tone can be found, especially in textile winding there are many gentle tones, but there are many in vinyl too.
You just have to find the right place.
Song
Quote: shade

Peace be with you bakers!
REMOTE SWITCH-REGULATOR SAPPHIR-2503 VIKO

Remote control of lighting with any remote control that is at hand at the moment. Going to bed you do not have to get up to turn off the light, you can turn it off using the TV remote control.

Manual (touch) lighting control (in place of a conventional switch).

Smooth adjustment of light brightness. The choice of lighting level according to mood and circumstances.

Imitation of your presence in an empty apartment.

Smooth lighting on, extending lamp life.

Automatic shutdown of lighting after 12 hours.

Affordable price with a high level of quality, design and comfort.

Compatible with incandescent and 220V halogen lamps.
The switch is not tied to a specific remote control, it reacts to any remote control at the moment you need - just point the remote control at the switch and hold any button for a little more than 2 seconds. The switch will understand that you are addressing it and will begin to respond to commands! And if it is more convenient to manually turn on or adjust the light (for example, when entering a room), this can be done by hand.

Thing!
🔗
Wit
Quote: Song *
Thing!
Uh-huh ... and only 1200 rubles. Well, Anya will put it and what? it is still necessary to gouge a ditch for the wiring to the brE. Or cover and paint with wallpaper ... Sheer garbage! And a colored wire is a mess! By the way, I came across in the thorn how the wiring can be refined. Only how to find it? I've come up with a way out for another reason. A sconce's cartridge broke in one of its horns. And this infection turned out to be not standard. Well, nothing can be shoved into this place - such a stupid design. Not collapsible. And do not let a new wire. Then I ran two green wires outside in such an arc and attached green leaves from artificial flowers that I found on the mezzanine to them. It turned out two branches. It turned out beautifully and original.I'll try to dig up this site and give a link.
In! Found! 🔗
Song
Quote: Wit
Uh-huh ... and only 1200 rubles.
Do not press Wit... Per the ability to lie on the couch comfort has to be paid. You so fought for the lazy club! Now what, into the bushes?
Anna1957
Quote: Olga VB
there are many gentle tones in textile winding,
And where should we look for them? Should there be Leroy, Maxide and Obi?
Olga VB
No, you need something specialized, like, electrical shops
shade
Peace be with you bakers!

Niarma
Very interesting! Anatoly, how will it look from a sconce (like Anna's)? What and where will you need to mount?
Wit
Quote: Anna1957
Friends, I will forgive the audience's help now on this issue: a wall under the wire from the sconce didn’t puncture because I didn’t know where the sofa would be. What options are there for the wire now?
I read such a blunder: "The preliminary diagnosis is a contusion of the right heel. The final diagnosis is a contusion of the LEFT heel." What is the switch on the fig to the sconce, not connected to the 220 V power supply !!! ??? Has everyone already forgotten what Anya is asking for?

shade
Peace be with you bakers!
Well, no matter how to a specific person
And on the topic - it may be useful to someone

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers