Furniture for kitchen

[Cirre]

Cirre, Galina, and this is the kitchen of which company (manufacturer) Very cool !!!

[Cirre]

Cirre, Galina, and this is the kitchen of which company (manufacturer) Very cool !!!

Lyudmila, this picture is just from the Internet. I think that someone who makes to order can do this

[Galina]

Galina, it's like assuming that those who bake the cakes will repeat what they want from the photo. doubtful
Ludmila, search for the picture in a search engine. it makes sense. stylish kitchen, execution is not handicraft, visible

And I ordered chairs !!! waiting !!

A very unusual color combination. Positively

Someone was looking with a bar


and there are many different things

[Yasmina]

Yasminalook, it seems to me that it looks like your plan, but without the BS
Ikea kitchen

[Tatyana]

Tatyana, yes, yes, it is similar to my layout) the dimensions are almost the same .. with the help of these photos, you can imagine how the BS will look from the window side .. Thank you)

[tana33]

tana33, very good layout, I really like it.

[Sens]

Sens, are you a designer? I have problems with the layout.

[Sens]

Sens, are you a designer? I have problems with the layout.

Until today I was a dentist

[Rita]

Rita, this is a category, every dentist can become a designer, but not every designer is a dentist ....

Virgin, look, plz, is such a sink convenient? Or is a small one too much, is it better just a wing?
And one more thing: there is a color beige, and there is a brown. I remember there were discussions about color, but now I can't find it.

🔗
It says: reversible, and 2 tap holes. And what is the unnecessary 2nd close?

Anya, a small sink is convenient, you can defrost it, soak greens for washing, here the power of habit and preference is already working
if necessary, you can close it with a special lid and there will be just a wing
by the way, I have a mixer of this brand

there are initially no holes, only marking, and the installer will punch a hole where needed

🔗

I have a car wash of this company.
🔗
Initially, there are no holes, as Tatyana wrote, they are marked and knocked out by the master on the spot. It seems to me that the little extra bowl is convenient. I then have 2 equal bowls. I bought it on the basis of using the second one as a fruit dryer, for drying dishes after a dishwasher, etc. But, Anya, I do not advise categorically buying this light-colored sink. After 2 weeks, it became indelible. I have champagne color. The bowl that is used as drying is ok, but the main horror is terrible. There are plans to replace it with dark brown. The sink is only 2.5 years old.
Anh, we discussed the sinks on page 115. I then posted pictures after the repair and complained about the sink. They gave me a lot of good advice then, but alas. And recently Larisa (Doplet) also complained about her car wash that she was not being washed. But hers. in my opinion another company.

I have a car wash of this company.
🔗
Initially, there are no holes, as Tatyana wrote, they are marked and knocked out by the master on the spot. It seems to me that the little extra bowl is convenient. I then have 2 equal bowls. I bought it on the basis of using the second one as a fruit dryer, for drying dishes after a dishwasher, etc. But, Anya, I do not advise categorically buying this light-colored sink. After 2 weeks, it became indelible. I have champagne color. The bowl that is used as drying is ok, but the main horror is terrible. There are plans to replace it with dark brown. The sink is only 2.5 years old.

Thank you, the opinions of users are very important to me.

[Anna]

Anna, I have a sink of the same company, but only with a wing, black, round, I really like it, deep and roomy, but if you don't wipe the water on time, then water spots are visible, and my son and her husband don't look very much that they put and pour in the sink, so I certainly would never have washed a light

And here - what is the apron from? I can not understand. 🔗

[Anna]

Anna, I will wedge into your conversation, because just a few days ago we changed the sink. True, the company is different, but I'm very happy with it. The bowl is deep. Washes well so far. The drops are not visible.
The holes on it are 2. One for the mixer, the second for the pneumatic lifting of the mesh in the sink, there is a button in the kit, you press it and the drain is closed. You can draw water.
But we inserted the waste grinder start button into this hole. It turned out to be very convenient.


We bought here.
🔗

with wing, black, round,

But I can't decide: round or square? I tend to be more square.

Virgin, look, plz, is such a sink convenient? Or is a small one too much, is it better just a wing? And one more thing: there is a color beige, and there is a brown. I remember that there were discussions about color, but now I can't find it

The fact that there are two compartments is very convenient. Here they correctly write that a dark sink is much more practical, for 10 years I have had a dark green one with two bowls, angular. Everything is fine. No color laundering problems. For a new kitchen in another apartment I will use the colors of wet asphalt. The only thing I don't like about your sink is that it is not designed to connect a shredder.

I have such a sink:
🔗
I like it and most importantly it is not expensive.

And here - what is the apron from? I can not understand. 🔗

it is plastic i think
I saw such

The only thing I don't like about your sink is that it is not designed to connect a shredder.

Shit, but I thought - they fit all sinks.

it is plastic i think
I saw such

Not worth considering? In addition to the cost, I am in the glass is stopped by the difficulty of installing the sockets (I will probably miscalculate and then want to increase their number)

Shit, but I thought - they fit all sinks.

They fit all sinks drains, and Lyudmila probably meant where to bring the start button.

[Tanyusha]

Tanyusha, I seem to have bought the same, only anthracite!

[Anna]

Anna, sockets can be mounted in the closet in the end, the attendants, and the permanent ones need to be thought out right away, this applies to the bast apron, you will not break the tile later, you will also need to lead the cable to it

here are examples

And ALL furniture makers and electricians with whom fate brought me together dissuaded me from such outlets - they say they are not very reliable ..

[Anna]

Anna, sockets can be mounted in the closet in the end, the attendants, and the permanent ones need to be thought out right away, this applies to the bast apron, you will not break the tile later, you will also need to lead the cable to it

here are examples

And their prices are horse

Not worth considering?

as an option, it is worth considering that the plastic is easily scratched and after a while the apron will lose its gloss

Quote: Exocat from Today at 10:00 pm The only thing I don't like about your car wash is that it is not designed to hook up a chopper. Shit, but I thought - they fit all sinks.

No, not to everyone. Many do not have something to hook the chopper on.
Your description specifically states:
• Installation mortise
• There is a wing
• Food waste disposer no

They fit all sinks drains, and Lyudmila probably meant where to bring the start button.

I meant what I wrote. When I recently started looking for a new sink, I found out that you can't attach a chopper to many. And manufacturers already indicate this in the descriptions. And if there is no indication, then you need to specifically clarify. Several options disappeared at once.

And their prices are horse

ahha)))
that's why the toad told me not to hover and think everything right away

[Anna1957]

Anna1957,
And they will occupy the precious space in the closet.

No, not to everyone. Many do not have something to hook the chopper on.

Thanks, I'll keep it in mind.

[tana33]

tana33, I looked at such sockets, but they take up a lot of space in the closet, so I refused them and put them like this:
🔗

[Ludmila]

I meant what I wrote.When I recently started looking for a new sink, I found out that you can't attach a chopper to many. And manufacturers already indicate this in the descriptions. And if there is no indication, then you need to specifically clarify. Several options disappeared at once.

Ludmila, I certainly apologize for commenting on your entry, but since I also recently dealt with the issue of the shredder, it turned out that they fit all sinks, for rare with the exception of cheap metal sinks, which have a small diameter drain hole.
And the grinder is installed instead of the siphon to the sink, and does not cling to the existing siphon.
And what kind of consultants come across in stores who really do not know what they are selling and have not seen their goods in the eyes

Sorry again.

Why apologize, we are here - a collective mind, everyone shares their experience. It is impossible to know everything.

Lyudmila, I certainly apologize for commenting on your post, but since I also recently dealt with the issue of a chopper, it turned out that they fit all sinks, with the rare exception of cheap metal sinks, which have a small diameter of the drain hole. And the grinder is installed instead of the siphon to the sink, and does not cling to the existing siphon. And what kind of consultants come across in stores that really do not know what they are selling and have not seen their goods in the eye. Sorry again.

I have been using the shredder for 8 years already, I can imagine how it is mounted.
The difference is that you have recently been engaged in a shredder, and I have recently been involved in washing. And the shredder is exactly the size of the hole that fits most, since the hole size has a standard. But with the design of sinks is more complicated. If you have already connected the shredder, then you understand how it is done. So there are sinks in which the hole is not intended for the possibility of mounting a grinder.
Personally, I came across this, as I picked up a sink that was suitable in shape and size, but did not buy it, since it was specifically indicated in its description that it could not be connected.
Therefore, it is better to overlook and exactly deal with a specific sink, and not to claim that everything fits everything.

[Ludmila]

Ludmila, and I got a sink and a chopper at the same time)))
And you were guided only by the description for the sink or saw it and realized that it would not fit?

There are a lot of mistakes in the description. And the owners of sites, stores may not even think about it.

I just wondered why it does not fit specifically?

And you were guided only by the description for the sink or saw it and realized that it would not fit? There are a lot of mistakes in the description. And the owners of sites, stores may not even think about it. I just wondered why it does not fit specifically?

I trust the manufacturer and always follow the manufacturer's instructions. I don’t count on the fact that there may be an error in the description and I don’t experiment with undescribed or forbidden functions. Here I am such an uninteresting and bone man. And also because I drink a full spoon from my experimental users of the problem. In the selected sink it was specifically written that it was not intended for mounting the shredder, as I understand it, the hole was cut so that there is no way to fix the shredder.

[Ludmila]

Ludmila, ok, let's each stay his own.
Good night and happy shopping!

ALL furniture makers and electricians with whom fate brought them together were discouraged from such outlets

When we went to the furniture makers, we were told, on the contrary, that you shouldn't have made sockets in the wall, right now they say everything will be installed in the table (retractable sockets), well, that's kind of like in the picture ..

When we went to the furniture makers, we were told, on the contrary, that you shouldn't have made sockets in the wall, right now they say everything will be installed in the table (retractable sockets), well, that's kind of like in the picture ..

Maybe that's why they said that this is additional money for furniture makers?
After all, electricity is, first of all, reliability and safety, and on retractable parts it is very doubtful for long periods of operation.

And ALL furniture makers and electricians with whom fate brought me together dissuaded me from such sockets - they say they are not very reliable ..

two families of friends have these, for more than a year, for sure, the hostesses like it, firstly there are no sockets on the apron, and they both have glass, and secondly, sockets are used as a stand-by option for equipment such as got-cook-cleaned
my furniture maker recommended it to me just, he also has one, top mounting
but I felt sorry for the money))) while I have enough block, which is installed in the corner and obscured by a bread maker))) and the main part of the apron is not spoiled by the appearance of sockets
I plan to make an ikeev lighting, in which an additional socket is provided

[Exocat]

Exocat, for my furniture maker it would not be extra. money, and add. hemorrhoids, because I can buy a block on my own, but put it all on him and he won't take a lot of money, it's not so expensive to drill a hole in the countertop and in the cabinet

Exocat, for my furniture maker it would not be extra. money, and add. hemorrhoids, because I can buy a block on my own, but put it all on him and he won't take a lot of money, it's not so expensive to drill a hole in the countertop and in the cabinet

Well, maybe ...
Doesn't a hole in the countertop reduce its useful life? I have a kitchen for 8 years, at the joints the countertop has already begun to look not new, after all, no, no, and something will fall.

personally, I am also suspicious of all these innovations .. Therefore, in my kitchen, I probably will not do this. Let it be better the old, but proven method of placing sockets - on the walls) and once again drilling a hole on the table is not hot .. Although, "our" furniture maker said something, like not on the table itself, but will move out from the table, like when it is necessary to put it forward - turned it on, but it will not be necessary inside, not to interfere with anyone .. I don’t know what and how they meant, I just didn’t delve into it, because I immediately decided for myself - I won’t do it ..

Exocat, I was so hooked on the info about the compatibility of sinks and grinders that I started looking. And this is what I found:
🔗
I thought: maybe there is an incompatibility in some models of shredders? I aimed at the cheapest one for 10tyr.
I also found a lot of washes at an affordable price, but for some reason not insert a link - it throws it to the Yandex page.