Furniture for kitchen

Not about the kitchen, but cool

[Svetlana]

Svetlanawhat a great kitchenette !!! Just a dream!!!

Hood Faber with retractable visor

Svetlana, but you can specify the model, or at least the basic parameters. Please! You can in a personal. I already broke my head with a choice ...

Svetlana, but you can specify the model, or at least the basic parameters. Please! You can in a personal. I already broke my head with a choice ...

I join! very interesting!

[Aunt Besya]

Aunt Besya,

Bul, Yulia, PalmP, Tamara, today, towards evening, I will look for instructions and write a model, FABER is written on the hood itself and nothing else

[Bulia, Julia, PalmP, Tamara,]

Bulia, Julia, PalmP, Tamara,, built-in hood Faber VELVET X / V A 60

🔗

Power consumption: 380 W

Whoa! I believe it is "high performance". Even mine is a little weaker.

[Cvetaal]

Cvetaal, Svetlana, Thank you my dear!!!

[Sveuulyaya]

Inna, I keep my promise to you

Sveuulyaya ...

I take off my hat and give a standing ovation !!!

Well, nooo, I don't even have to dream of this ... and that's for sure)) ...

I just have trouble with my imagination, I don't even know which side to approach my kitchen ... where to run, where to start ... it looks like I'll grow old without a new headset ...

[mosk and imagination]

Ladies, thank you for that, it's not difficult for me to post pictures, but if at least someone will be helped by this, I'm only glad

The hood is very good, but the price for it is not weak either, 6 years ago we paid 18,000 rubles for it

Kroshik, do not slander yours mosk and imagination
, run to some good kitchen salon (there are a lot of them in Moscow)

in my life there were three kitchens, two of which are built-in, and both are from "Stylish Kitchens", before they did not take money for a design project, as now I don’t know, and at least sketch out and sketch until you find your own version

both of the "Stylish Kitchens", before they did not take money for a design project

Svetul, they didn't take it only if you order the kitchen from them, and if you just go to different salons and do different projects, then it was worth a thousand, at least 10 years ago it was. Moreover, you pay for the project right away, if you leave to "think" how I did it, and then, when you come back, deciding to order (there already at least three hundred times redo the project - for free), then the money you paid is not returned in cash , but deduct them from the total amount of the order.
So before making a project, it is better to first find out everything, maybe that has changed. Otherwise they will write that it is free, but they will not indicate that this is only when ordering, and you will lay out an unexpected deny for your "just project".

I don’t understand .. What prevents you from drawing several options yourself in detail on several sheets of printer paper? Anyway, someone else's aunt will not come up with better owners. And in your own project, every centimeter will be tailored to the owners.

Well, if you order furniture according to ready-made templates, and not according to your proportions and sizes, then it is even easier. We use special services on the Internet - it seems that Ikea recently had a kitchen planner. Well, or download something like Pro100 and even draw our own proportions.

Then, with a picture, dimensions and description, we go to the salons and ask how much it will cost in this or that performance.

A lot of nerves, money and time are saved, and the result will turn out to be one hundred percent verified, especially if the final version is allowed to rest - I give a grudge, anyway I will want to change some little things in it.

[Elena Tim]

Elena Tim, Lenus, maybe so, but they didn't take a thousand from me 6 years ago, they drew three times, if not more, in the salon on Prospekt Mira, but ordered it in Fryazino, in the salon at the factory, it turns out, they took my word for it? :

and in the "kitchen yard" on Varshavka they drew for free ....

[Inna]

I don't even know which side to approach my kitchen from ... where to run, where to start ... it looks like I'll grow old without a new headset ...

Inna, take an example from my husband. The other day we bought a small plot outside the city, on which a house was built, in which there is only a roof and bare walls.So in three days, while I could not leave the city, my husband and a couple of friends leveled and whitewashed all the walls, bought and installed a kitchen set, a sink, bought and glued tiles for an apron, ordered a laminate, well, for little things ... Now I don’t know whether to scold him for not asking about my opinion about what the kitchen should be like (I haven’t seen anything yet), or to be glad that he saved me an extra headache

[Erhan]

Erhan,

Give thanks and kiss on the top of your head! Thank you again and kiss again!)))

[Erhan]

Erhan,

Give thanks and kiss on the top of your head! Thank you again and kiss again!)))

Well, you can still bite once - Schaub and it was easier for you, and he was not very arrogant

Here I am for advice ... save, help!
bought the bottom of the kitchen, now you need to order the top.
the whole catch is that the bottom has curved facades, and I want the top with glass, the manufacturer says that it doesn't do a concave one with glass, order a deaf concave or straight facade with glass.
The question is, will it be very striking, the bottom is concave, and the top is straight with glass .. or will the glass smooth everything?

IMHO, glass won't flatten

[GriNata]

GriNata, well, it will be noticeable, of course. ((Why didn't they plan everything in the same style right away?

It depends on what is bent. And depending on what shape the boxes are at the top. If with hinged doors, then you can order a couple of bent doors and leave them open, making accents on them. And the rest is how it goes. Not?

Or you can spit by ordering even glass, if you think that this will be more convenient for you.

IMHO, bent bottom and top - bust (excluding corner elements).
But if we are talking specifically and only about corner elements, then, of course, the top and bottom should be the same.
If your manufacturer does not make curved glass facades, then you can separately order glass by size, for example, at Nagatinskaya, or in other workshops.
But think about the fact that glass facades are not always convenient. Often people complain that because of such a facade, the insides are visible through untidy multi-colored spots. And even all kinds of colorful stuff on the tables and walls - it turns out very untidy. Do you need it? You will not have a picture, but a really exploited room.
Maybe make the upper facades also deaf, only lighter, for visual facilitation of perception.
Or it is precisely these corner elements that should be made without facades, with open shelves. Or combine glass and blind at the top.
It would be nice to have a photo to understand what this is about.
In general, such things must be thought out before ordering.

Thank you very much for the feedback!

Why didn't they plan everything in the same style right away?

The cost of what suited my husband (he is a perfectionist) turned out to be too high. We decided to order in turn, so as not to disturb the family budget so much.
There are only 2 bent elements: corner and end, corner, I wanted to make it like a sideboard - arrange the ceremonial dishes ...
At first, the manager agreed to everything, made a project ... before ordering, we faced a problem.
Now we are looking for solutions (as in the saying, there was no sadness, a woman bought a pig ...)
The top will be light vanilla, the bottom is dark chocolate))

[highly]

But think about the fact that glass facades are not always convenient. Often people complain that because of such a facade, the insides are visible through untidy multi-colored spots. And even all kinds of colorful stuff on the tables and walls - it turns out very untidy. Do you need it?

I have had plain frosted glass for many years. The photo looks much more transparent than in reality. Still highly I like that through it something slightly shines through with "untidy spots". I even have a separate box (like a "rack" for some members of the forum) is with the same design. Like a closed box - and at the same time not deaf coffin cupboard. ))

🔗

Although, of course, how many people, so many opinions, you cannot argue with that.)

The cost of what suited my husband (he is a perfectionist) turned out to be too high.

A familiar picture.)) Only here it concerns me.

Come on, something will come up.

I wanted to make a corner one like a sideboard - to arrange the dishes for the ceremonial-weekend ...

Yeah, so the glass is transparent? Can you really order from another company? You cannot leave the ceremonial dishes open, this is a fact. ((

Well, do not suffer! And so your top will be visually lighter compared to the bottom.
Make all the upper facades blind, and if you really need a showcase, you can make one straight line with glass doors in the center. Then anyway, either curtain it from the inside, or re-order the deaf when this "stain on the kitchen biography" gets bored.

Thanks for the advice)))))
I did NOT find a photo of the entire kitchen - this is the problem corner:

it turns out they took their word for it?

Probably, it's just that the company's policy has changed in four years. Well, rightly so, with prices like theirs, at least the projects should be free. Chesslovo, paying the total amount at the cash desk, I did not even notice this "thrown off" thousand.

Well, you can still bite once

Toka be careful! Ethno excites them terribly ...

But he deserved it, damn it. Ay yes muuush!

I re-read almost the whole topic, I reviewed all the sites on kitchens in our city, looked at Ikea ... I don’t want to live with one tiny cabinet anymore ...
You have a good husband!

I don't want any kitchen anymore

: spiteful: nauseous, huh? And I had the same garbage. Having traveled through a couple of salons, having looked at a bunch of photos on the Internet, I wanted to leave everything as it is and not bother. Sit down, rest for a week and the desire will reappear.

torments of creativity, it's so interesting))))
I drew my kitchen three hundred times in Ikea, ran around the salons, then redrawn 300 again, downloaded a bunch of pictures on the internet ...
and then friends invited us to a housewarming party, I go into the kitchen and understand. So here she is! The kitchen of my dreams!
and since the head of the family of friends is just engaged in the production of furniture, it’s like in a song - I, Vasya, want the same !!!
and in the end my kitchen is not at all like friends'))) because while they were drawing, counting, arguing, I changed my mind 10 times

[Irina]

Yes, Irina At the moment in my kitchen I have a "hodgepodge" of all kinds of lockers
I have already definitely decided on the style and color scheme, now I need to save up for "Wishlist", maybe I will save up by the spring

[Tatyana]

Tatyana, this is interesting, I do not argue Only there is not enough money for the kitchen of a dream

I am planning LED lighting in the new kitchen. Is this stuff convenient? 🔗

Girls, I'm sitting planning Ikeevskaya cuisine.
What a small selection of colors ((
and basically the film was written about the material, and I realized that this is not very good.
Should I consider it or discard the film right away?
There are also cabinets on the floor, and there are ones on legs. Is it for different countertop heights? I am short, consider the one that just stands on the floor?
As I understand it, if on legs, then you can also build in basement drawers, right?
Porridge in my head, but it seems like we are planning to go to Ikea tomorrow, I don’t know if it is necessary, I haven’t understood anything yet (

[Svetlana]

Svetlana, I have ikeevskie with a film, they are very good, I even pass them with a steamer when I genial. And the legs and the floor are an option, they are all on legs, your business is to cover with a panel or not. Although it may have changed in three years, it used to be like that ..

[Lisichkalal]

Lisichkalal, I don't know about you, but we have the opportunity to order a layout, that is, call the manager and draw together, they help, or you can plan on the spot
I have not seen the cabinets on the floor, they are all with legs, you can just close the legs with a plinth or leave them free
they have painted facades, but those that are inexpensive, I was told, are quite capricious, a dent from the chair may remain, for example, if a child sharply moves the chair
and their film is good, the more the quality in your country will be higher than in our

Now there are 2 types of legs: small 8cm (they are closed with a plinth) and high metal ones - they are placed openly under frames with a height of 60cm.At the same time, the total height of the cabinet with the tabletop is the same, that is, high legs simply reduce the capacity of the cabinet - I see no point in this ...
I don't know what quality their film is, but painted white facades are scratched even with a fingernail.

Girls, thank you very much !!!! what I would do without you)))
I think that we also have a furniture planning service with an ikea worker, but without a husband in French, I’ll probably plan it))) and my husband always works !!!
So I'm sitting now, I'm poking around))
it's great that you can take it with the film, especially since you can wash it with a steam cleaner!
Legs ... yeah, I get it! Consider those that are small. Can a plinth for 8 mm legs be made in the form of pull-out drawers?

Can a plinth for 8 mm legs be made in the form of pull-out drawers?

little can be. In my opinion, they make boxes from 10 or 12 cm ...

Understood, this question will need to be clarified in the store.
Another naive question)
but how to plan the insides of the boxes? it is clear that drying is needed, a piece for spoons, forks, etc., but what else?
I just met here, complete the kitchen in full))
And I have a small tabletop oven, and the furniture was built-in standard sizes. It turns out to take a rack for 2 microwaves? and just put them there, an oven, and a micru on top.
If so, then they still do not get up, like built-in ones? Above and on the sides, for sure, there will be places?

Lisichkalal, if your equipment is not built-in, it has technological holes from overheating on top or on the sides and it is undesirable to close them.
Moreover, in a tabletop oven, the upper part can heat up and spoil the shelves and cabinets during cooking.
Consider bracket options for this technique. or just an open shelf.

I am planning LED lighting in the new kitchen. Is this stuff convenient? 🔗

Why don't you answer me?

Can a plinth for 8 mm legs be made in the form of pull-out drawers?

This feature was in the previous series of kitchens. Not now.

but how to plan the insides of the boxes?

They have special dividers in boxes, and containers of different formats. Tins for bulk products are made clearly for their cabinets or drawers, there is no useless empty space. Today I bought myself a container for flat lids. Very convenient. You yourself must decide what will be in the box or on the shelf and, based on this, already buy the insides. This does not have to be done right away. There may be a lot of unnecessary things.
Any technique, if it is not an installation, will not fit clearly into the space designed for installation. There will still be gaps.

Why don't you answer me?

Oh, I'm just against LEDs, so I don't express my opinion. I have a classic look at kitchens.
I know that who did the backlight, everyone liked it, it was cozy in the evening, if only one backlight was lit

Oh, I'm just against LEDs, so I don't express my opinion. I have a classic look at kitchens.
I know that who did the backlight, everyone liked it, it was cozy in the evening, if only one backlight was lit

There we are talking about a switch, I'm just not very much in the subject - is it convenient. The price is very attractive compared to ours.

[GriNata]

GriNata, very interesting, why against LEDs? If it's not a secret, tell us!

Anna 1957.24 buttons !!! this will be a disco
In general, we had a kind of remote control from the fan - quickly lost in view of his puny.

[Ksenia]

Ksenia, and what kind of container? I also need for the lids

Rita, nothing technical, well, except for the short service life of the tape and the fact that it changes entirely, as well as their widespread cramming. It's just that my personal perception of them is not and that's it, it's easier to arrange the lighting with lamps, it will be like home

Girls, still HUGE THANKS to you !!!