Thermomix (discussion and feedback)

[Oksana]

Oksana, yes, 2 cups are convenient, but now it takes me away from the prices

[Laslovna]

Laslovna, I now use induction caches, so it's not difficult to rinse and dry with a paper towel.
I'm more worried about where to keep the park of these bowls)))))

I have a plastic ice cream bowl for Keshik, if necessary, it helps a lot!

[Pchela maja]

Pchela maja, no, Marin, in TM spare parts were inexpensive, they had such a policy before, like you bought TM and already a member of the family, and everything to you at cost price, a ring in a lid cost 300 rubles, a new knife 3000, a bowl with a lid and a measuring cup 7000 (even it is not half of the TM, but one-fifth), but then it cost 38000 rubles, which translated into euros was 1100. And now with this whistle with a course

Girls, if you have Keshi, then there will be much less work for TM and the second bowl is completely unnecessary.

I do not argue, especially for such a price! Although for the sake of interest I will ask how much a bowl with a lid costs!

but there are a lot of complaints: sealing gum, knives fly off, vibration during replacement, noise level

my thermomix is ​​already about 5 years old, the gum began to skip literally 3 weeks ago with constant use, nothing broke during all this time, did not become dull and did not change. I only broke a shoulder blade literally in the first six months, because I dropped it into a working TM and the knives chopped it up.
I don't have any vibrations and jumps, only when I made a tough dough on dumplings with more flour than it should be according to the instructions. And it does not make noise and is quite adequate for the work performed.

Further, I consider it obligatory to order such an expensive device only after the presentation or after trying it in action with friends. I myself have repeatedly been disappointed in purchases that I acquired blindly based on reviews from the forum. Everyone has their own priorities and preferences, some need one thing and like it, others another. Therefore, you need to see with your own eyes, touch with your hands.

[Laslovna]

Laslovna, 18800 kit costs extra

And if there is no way to get to the presentation, and friends do not have such a car, they want to REALLY STRONGLY !!!!
We have to hope for the forum and the Internet!

[Laslovna]

Laslovna, 18800 kit costs extra

Whoa! This is for Thermomix. I'll find out tomorrow to Maikuk!

[Irma]

Irma, and how much does the new TM 31 cost now?

18800 kit costs extra

but this is a complete set assembled - a bowl, knives, a lid with an elastic band and, in my opinion, even a steam insert or maybe without it, I don't remember. Everything can be bought separately for less.

[selenа]

selenа, 69,850 rubles, this is 31, and a new one is expected for 90 thousand

[Irma]

Irma, paraphrasing the saying "if you can't, but you really want to ....." "if it's expensive, but you really want to ..."

[Vei]

Vei, no without a basket. Bowl without stand 13,600, bowl support 880, lid 2,160, knife 4800, seal 880 - more expensive separately

[selenа]

selenа, I really want to have a 10/10/10 loan on the Thermomix office, I would even take it, but our office does not give a loan at all.

10450 rubles
the price of a bowl with a lid and knives. For the price it is a little happy. The main thing is that there are no disappointments in the device.

There is not a single negative review about Maikuk, a bunch of video recipes on YouTube, I think you will not be disappointed

Tell me where you can buy such a thing for an outlet? Looks like a voltage regulator

And it seems to me that this is a timer.

what's the point?

Girls, but in my opinion it's just a "double", isn't it?

It looks more like a twin adapter from our outlet to an American one.

what's the point?

Well, if the new one turns on itself, then you can program the turn on then.

But I took a closer look ..

More like an adapter]

Read an article on making yeast dough
🔗
It seems to me that the temperature range of Thermomix is ​​still better for the test than Maikuk
Who thinks about it?

I activate the yeast in TM and knead the dough. Fermentation all the same takes place either in MV, or in a warm place.

Who thinks about this? [/ Quote]

I think that in MK the temperature should not rise above 42 degrees, if you meant it. Temperature accuracy and induction is famous!

Girls, congratulate me and now I am with Thermomix, there are no words, I was not so happy about my new car ... here:

I congratulate you, I sincerely rejoice together with you !!! Share your impressions, very interesting!

[Galina]

Galina, share, turnout passwords, addresses where you bought, how much, what will you cook?

[Laslovna]

Laslovna,
Matilda_81,
The girls bought thanks through network marketing, the girl is engaged, the box was jammed, gave it to me for 55, in a whole box of 62, in front of me they opened everything, the foam is whole, I took everything new in general, I'll go melt cheese in it, then I'll tell you .. ...

Gal, congratulations from the bottom of my heart! Did you buy a new one or what ???

[Vei]

Vei,
Liza aha new, tell me here how the butterfly is inserted or just put on?

Galya, Congratulations, let him serve for a long time and please. And the price is good!)
The butterfly just dresses.

[Omela]

Omela,
Ksyushik, thank you very much ..., I myself am so glad that I am bursting with it ...

[marlanca]

marlanca, Hooray!!! Congratulations!!! Long, strong friendship to you !!!

[marlanca]

marlanca, Congratulations! Let it serve for a long, long time))

[Omela]

Dear girls, thank you very much for the congratulations .... this yes, my wishlist ...
Omela,
Oksana understood, thank you very much ... I already cooked semolina porridge and ate it ... like an airy soufflé ..., I wanted to melt cheese, but there was still a whole tray in the fridge ...

[Galyayayayaya]

Galyayayayaya!!!! Congratulations!!!
I'm very glad for you! And how lucky !!!
What a good discount it turned out !!!!
I really understand your happiness! Then you jump from some kind of shredder with happiness! : goody: And from such a gift in general you will be in seventh heaven !!!!
It's a pity we don't have a branch .... They don't want to open ....
I hope my dream will come true someday too ...

[Seven-year plan]

Seven-year plan,
Thank you Svetlanka, dear ... I'm like a monkey while I'm jumping around him ..., I kneaded the dough for biscotti, crushed nuts, made sugar powder, everything is very good. Like.....

Thank you Svetlanka, dear ... I'm like a monkey while I'm jumping around him ..., I kneaded the dough for biscotti, crushed nuts, made sugar powder, everything is very good. Like.....

I'll burst with envy now, by God

How much dough was kneaded in grams, how did you behave? What kind of gum is on the lid? Everything is very interesting !!!

[Gaaaaal]

Gaaaaal!!!! Are you teasing? Yes??!!!!!!

I will go now and will knead the dough with my HANDS ..... So that I feel sorry for myself ...

But seriously !!! (I repeat once again) Very, very happy !!! for you!!!!!

I'll burst with envy now, by God

Gulnara! Let's unite ... And together we will suffer ... ... All the fun ...

Girls, about Maykuk, since I'm still at a crossroads, what to buy after all, I found a negative review about the marriage of knives (under the spoiler, translation from transliteration, rough, but more or less clear)

🔗

PROBLEM with MYCOOK blades and Taurus technical support

Go frustrated with what I took. I have almost a new car for less than 10 months, and I have it damaged, and even worse, the service does not accept bail.
You ask me what happened because the blades expel me greasy liquid stains and me the whole car and jug.

The truth is that I have found to be malfunctioning very normal of this robot, and of course Taurus indicates that this is a piece of wear and tear from normal use of the machine. Of course, I have it 9 months, and I think that it is not normal, that is right as such.
But first things first.
Taurus has 902 numbers to get in touch with (bad start). Since I could not contact them in the evenings, called in the morning (at the time, they celebrate). I never picked up the phone, the answering machine jumped up where you indicated to leave your name and phone number. I left my phone and no one called me. On the third call, the same, and this day at 15:00, just as he left for work, I call fixed at home, there was a Mycook service. How can you call me installed if I take three days to leave my name and mobile number on the answer as I am indicábais? I say to call the registration number in the block, but the wrong one left on the answering machine (I don't understand). I explain the problem and tell me what is not covered by the warranty, it is worn. Of course, I said that my car is 9 months old, says that this is not normal, it will be consulted and call me again. I tell him call me on the phone. After 5 days with no news (maybe they call fixed) I will call and tell me they checked (technicians answer) and give me a call. This time, yes I call the phone, but I could not catch it. After three or four days I will call back to confirm which is not covered by the warranty and wear knives that cost me € 35.35 and presented to me if I want. Of course, I say no, I don’t want to pay money every nine months, it seems unacceptable that the fact that the fraud label is rubbed and understand that this is not normal.

I leave the office drinking my city and consult with them about this case. They confirm to me that Taurus is eligible, only a free replacement is required, if a failure occurs in the first 6 months, then the consumer must prove to an expert that the part is a production problem. Of course, I point out that, if not necessary, then inform me about the maintenance of the car and make it clear in the special warranty parts that count as clothing (as they do in the car maintenance book). I answer yes.
Therefore, today I have approved the settlement through the consumer office in the city, and I hope Taurus will reconsider this. It is amazing to wear in front of the blade turning mechanism, but the blade itself can obviously be considered wear and tear.

It seems incredible how happy I was with my Mycook before this unpleasant experience happened to me. And worst of all, the feeling of helplessness and deception on the part of the brand is not responsible for the mistakes of its devices.

Obviously, I can't keep posting Taurus recipes until I fix this problem, hopefully soon, and leave it all.
Anyway, I think it is important that everyone knows the possibility of changing the blades for wearing them in less than one year before buying this machine (I would like to know if they were to decide at the time of purchase) if of course Taurus will not decide to change their policy, which will also inform you through my blog.

Eva Flores Dec 05, 2011 10:50 am
me the same thing happened to me in the shoulder blades, did not catch me on the phone service and have consguido to contact them by email. As my Mycook is no longer under warranty, I can order a new set of knives, but it all took almost three weeks to use. Were more attentive and quick to solve this kind of problem before ...

toni Feb. 13, 2012 10:42 am
Hi girls, I have the same problem and said K YAME the blades were worn and I replied that they continue to cut, this is the part I don't understand. because if they wear no cut. Nooo ?. Well, I watched the rubber EVA together, they were a little wide and new Pedi, originally N perdia then started to lose this gracilla that sale.a I too m told that a change that would happen when I lost a solid thing very little, but, when he loses more fluid and liquid graciento food. Last summer, before they changed my name to rubber knives and cost 20 euros and a month later I went to ask them and they told me 35 euros told him that I wanted so a sudden rise in a month and did not leave me all clear ... I installed it on this Yamo.If you want to

Anónimo 23 August 2012, 13:28
I appreciate that you will be wasting numbers. The same thing happens to me. The blades continue to cut like a demon, but leaves a rather nasty rusty liquid. If I knew that I bought a Thermomix.

Pilar 24 August 2012, 0:17
I do not remember the number, do not have it at hand, but the Mycook comes in the instruction book. Even if the knives are more than six months old, you're going to get paid. Greeting.

Pilar on February 13, 2012, 22:06
Only the solution you get, you buy new blades. Greeting.

Anónimo June 12, 2012 7:28 pm
Hi I am wondering if someone is correcting my question, what makes rice pudding today I came out of the jar closed everything I have done this before and has never happened to me.

Pilar 13 June 2012 12:36
Where did he go? For rubber plug or below? Mine didn't happen to me.

ingenua..18 May 2014, 17:55
disaster car. I four months ago, butterflies, when you need to move a lot of food (ratatouille, pasta, potatoes, etc.), although the amounts indicated, the output of the shaft, so a splinter with blades and leaves plastic waste in the food. In the store where I bought it, I changed the butterfly, but I did it again. I fit perfectly and the speeds that are used are specified in the recipe. As food is not removed, other than destroying the butterfly, it remains unprocessed. I had twenty years, Termomix, who did not give the slightest problem and give you confidence in the national brand (which does not reach 300 euros in price difference between them), I happen. I am trying to return and the amount paid by me, because he absolutely does not mind.

On Amazon, I also met a similar response that people had to order a knife.
So, apparently, not everything is so cloudless with these robots ...

The girls bought thanks through network marketing, the girl is engaged, the box was jammed, gave it to me for 55, in a whole box of 62, in front of me they opened everything, the foam is whole, I took everything new in general, I'll go melt cheese in it, then I'll tell you .. ...

Take me to the company of the sufferers too, but I already feel that this year I will definitely buy.
And where can I find such girls, I also want boxes with a marriage for 55!)

[Svetlana]

Gulnara! Let's unite ... And together we will suffer ... ... All the more fun ...

Svetlana, I hope there will be a holiday on our street and we will have an assistant

[Pchela maja]

Pchela maja, that's all you will find! And Thermoix found me reviews on Maikook. After all, I also looked for negative reviews in Google and there was nothing besides praise and advertising, though I didn't think of translating a European site

Yes, yes! but this is completely unintentional, I assure you)
I usually google the name and look at the photo, so I came across a photo of the marriage and I followed the link and read about it. The Spaniards write, they have it very common.
I think that marriage can be in any technique, there are also complaints about Kenwood.
This is absolutely no reason to refuse the model you like.
You just need to know what is found in a jersey too.
I still haven't decided for myself that induction in the robot is more important to me and, accordingly, fast heating or more flexible programming in terms of temperatures and reverse in the thermomix.
ps By the way about Avito. I found an ad through the phone, but for some reason I could not find it from the computer.

Girls, here's a new TM on Avito 45 thousand Moscow
🔗
There are for 50 and for 52, new and and even more expensive)