Kitchen machine Kenwood (2)

At the expense of squeaks and whistles I will not say. I do not have that. Works quietly. And the shaft can be manually rotated, but with great effort. It has been this way from the very beginning.

Thank you, kseniya D. Have you lubricated the nozzle? I read that manual rolling machines periodically require lubrication. And my shaft does not lend itself manually at all, although it may not be strong enough)
Apparently, the service is waiting for me. It's a shame, the attachment is useful, a lot of money, but that's how it comes out.

No, I didn't. Try to pinch and twist with pliers. For the first time, too, nothing worked out for me, I was afraid to apply force. And then nothing, slowly went. Slightly, but you can scroll to insert it into the slot.

I was afraid of pliers. Although, in theory, there is nothing to break there. Thanks for the advice!!

For many, she does not turn his hands, including me. But a creak may appear if washed or the dough has gotten ... in such cases I grease everything with VD ... but this is not a guide to action, better for service, of course.

By the way, I also turn the shaft with great difficulty in the dough sheeter. Then the fingers hurt.

Yes, I adjusted the whisk and K-tip height today.
And I immediately saw the result) the squirrels whipped faster, otherwise they fiddled along the bottom.
In general, advice to all, adjust the nozzles !!

Well, Masha, the manufacturer, right on the first pages, recommends adjusting all attachments, except for the hook.
That's where I started. But sometimes I think, maybe the hook can be adjusted?
Girls, who adjusted the hook thread?
And, by the way, I hardly use a whisk now, only for something liquid, for example, for semolina or a thin custard.
And she adapted to whip the whites with a K-shkoy at high speed. It beats perfectly, until it is firm, but then you don’t need to pick anything out of it, otherwise you’ll choose everything from the whisk, then either half will remain, or everything will have time to settle.

[Olga VB]

Olga VB, Ol, so I didn't have a key, but today I still got it)
I'm sitting happy))

I adjusted the hook, like other mixers, but now I don't use it at all - I mix everything with the K-shaped mixer, except for proteins. And now I'll try them!

And yeast, and rye, and pasta? .... All K-shkoy?

I like the hook. Yeast dough, dumplings knead very well.

[Olga VB]

Olga VBYes, the hook takes longer and the dough rises up the hook.

[Olga VB]

Olga VB, Ol, so I didn't have a key, but today I still got it)
I'm sitting happy))

Maria, what is this key? I have it too. The attachments do work well. The whisk beats the whites well and does not clog.

[Alla]

Alla, the key is the one that unscrews the nut)

ellanna, thank you. Apparently, the dough really got inside.

Thank you Maria. Did I understand correctly any spanner that fits?

[Alla]

Alla, yes, a wrench.

[Olga VB]

Olga VB, Good day! Do you have the option to share a coupon or e-book in Russian? Regards, Tatiana

Yes, of course, if you tell me your email in a personal message. the address.

How can you write in a personal message?

There is an icon under the ava - a green scroll.

Girls, well, finally, my idiot's dream has come true !!! My KMM 020 is now with me and today I have already whipped proteins for a biscuit!

So, hde a biscuit !!! I wait!!

How can you write in a personal message?

Click on under the NICK of the person you want to write to

My KMM 020 is now with me and today has already whipped my proteins

Congratulations!
I wish you trouble-free work for the benefit of your family and friends!
And we are waiting for new recipes.

I know that I got into the wrong topic.But you girls have become so close to me. I trust your opinion. All the same, I'm thinking about buying a multi. You advised the multicooker-pressure cooker. And which one ?! Or direct where you want.

I really didn't manage to twist the whisk with a key, but I had 6 proteins, so he whipped it all up for me, but not in seconds.

[Vei]

Vei, I whipped it once with a whisk for a minute, then picked it out for an hour.
So now I whip with K-ashka at the 5th speed. And the result is excellent, and you don't need to pick anything out.
And it is advisable to twist the nozzles, except for the hook. It's not difficult there, everything is very clearly painted in the instructions.

Musenovna, personally, I would recommend just a slow cooker.
As a rule, anything that is called a multicooker-pressure cooker is actually just a pressure cooker with very stripped down multicooker functions.

In addition, while the pressure cooker picks up the mode, until then it relieves the pressure, ... As a result, the time is almost the same as the multicooker, and the programs and, accordingly, the possibilities are much less.

A few exceptions are the Steba DD1 slow cooker slow cooker.
The girls praise her, but personally I did not use it. You can watch it on the multicooker forum 🔗

I have a Redmond M150. I bought myself and my daughter-in-law. Both are very happy.
Plus it is very intuitive and easy to use and just seems perfect as a first MV.
Here on the forum she was also discussed among others.

[Olga VB]

Olga VB, Thank you. I will read it. I've been looking at steba. I actually want to use it for sous-vide technology, but I don't want to buy a suvidnitsa, I want a more versatile device.

Girls, well, finally, my idiot's dream has come true !!! My KMM 020 is now with me and today I have already whipped proteins for a biscuit!

Congratulations! Joy and appetite to all your household!

[Olga VB]

Olga VB, Thank you. I will read it. I've been looking at steba. I actually want to use it for sous-vide technology, but I don't want to buy a suvidnitsa, I want a more versatile device.

We have a whole section of the Staff on the forum)

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&board=543.0

In addition, while the pressure cooker picks up the mode, until then it relieves the pressure, ... As a result, the time is almost the same as the multicooker, and the programs and, accordingly, the possibilities are much less.

A few exceptions are the Steba DD1 slow cooker slow cooker. More details: https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=114203.0

I agree with the second.
Not with the first one - in a rough version I compared the cooking times there and there. There is a difference, sometimes the difference in hours is different, just the more time itself is needed for cooking, the more noticeable the difference. And you can also play off forcibly in a dozen seconds (for second courses).

Olga VB, if you do not mind, share the coupon and the book with me (I will drop the address in a personal). Thank you in advance!

Thank you!!! I will study.

Comrades, do not tell me, it turns out that in most domestic stores they sell 086 under the guise of 080?
And in general, apparently, it is not PCT products that are pushed the most.

Comrades, do not tell me, it turns out that in most domestic stores they sell 086 under the guise of 080?
And in general, apparently, it is not PCT products that are pushed the most.

086 is 080 with nozzles.
But different stores have different configurations. I bought mine as 080, but it came with attachments. And in other stores I saw 080 just one combine.
I don't know about the PCT, my PCT.

086 is 080 with nozzles.
But different stores have different configurations. I bought mine as 080, but it came with attachments. And in other stores I saw 080 just one combine.
I don't know about the PCT, my PCT.

Here is 080 in mvideo, but the attachments are like from 086.
Where did you get yours?

In the Media Market. It was also called 080 there.
But in online stores I saw an empty 080.
Don't you need any attachments ?! In my opinion it is convenient.

Don't you need any attachments ?! In my opinion it is convenient.

Needed, needed)) just confused labeling)) wanted to understand.even more complicated by the fact that it is practically not available anywhere.

Needed, needed)) just confused labeling)) wanted to understand. even more complicated by the fact that it is practically not available anywhere.

Probably before the new year they bought everything. )))
Someone here bought a combine in December. Check out the tape. Can someone tell me where at a good price.

Probably before the new year they bought everything. )))
Someone here bought a combine in December. Check out the tape. Can someone tell me where at a good price.

Yes, I've already read everything)) It's cheaper to fly to Kiev, buy everything there and come back)) Even air tickets will pay off))

On mine, on a large box, the label stuck on it read 080/084/086.
On the seller's website, it was designated as 080.
The set, in addition to 5 mixing attachments and an insert-steamer, included a processor with 6 discs per medium-speed socket and a heat-resistant mixer. It was all in one big box with the same label.
The representative explained to me that for different countries - different markings, but in all countries it is the same equipment, only a package of documents in the language of that country. For example, for Russia - 086, for Germany - 084 ... and so on.
But since it is written on the box (see above), each seller writes what he likes best.
But if you bought a "bare" car, that is, without a processor and mixer, then this is an initiative of the seller (dismantled and sold separately) and, most often, a gray delivery.
This can be checked, for example, under the guarantee: if there is no guarantee or it is from the seller, and not from Kenwood (DeLongy), then most likely this is it (gray).
Another sign: if they were brought not in a single large box, but several different ones, or if it is large, but there is a lot of free space in it, it is not tightly packed with boxes. Then this is also a dismantling.
By the way, at one time I was looking for it naked, but I didn't want to take it without a guarantee.
When I found out all these nuances, I had to take a standard set.
I thought that the mixer and the processor would have to be sold, not needed. But no! I use it and I'm glad.
As for the price:
I took less than 55 sput with delivery. But there is now a little more expensive.
Now I know where you can get it for 46, but a "bare" gray delivery with a guarantee only from the seller, that is, at your own peril and risk.

Wow)) thanks for the detailed answer) And you, as I understand it, did not take the PCT, since from somewhere with delivery? Could you tell?

"From somewhere" is from the next street (figuratively speaking).
I took in Moscow, fully official, certified, absolutely "white", delivery was straight to the kitchen, the official Russian manufacturer's warranty for 2 years and an extension to 5 years.
That is, for 54 sput with something, they brought it home to me and I have an official 5-year warranty and full pleasure (mmm, mmm) from operation.
What I wish you too!

Can you tell me the store? I haven't found it anywhere in less than 70 now. Well, just 62 500 v, but it's some kind of muddy store))))

Yes, this is a gray store, they only have their own guarantee, while it is not clear where to look for them if they close.
But people buy there too, because for some items the price is quite tolerable, and when the equipment is a priori reliable, you can take a risk.
For example, I want to order the 955th meat grinder from them. It should be cheaper and much faster than ordering from the bourgeoisie. And you can pay upon receipt, not monthly. And at least some kind of guarantee.
Some people generally buy from the bourgeoisie, and there, in general, payment is preliminary, and there is no guarantee.
By the way, if we cooperate with someone, then it will be possible to save a little more on delivery.
I will answer your question later in a personal, find, check the new price tag and write.

[Olga VB]

Olga VB, it seems you were not very happy with the kneading in the combine with knives. Today I was kneading shortbread dough. I was pleased with the result, very quickly and even better than K-shkoy.

Yes, this is a gray store, they only have their own guarantee, while it is not clear where to look for them if they close.
But people buy there too, because.for some items, the price is quite tolerable, and when the technique is a priori reliable, you can take a chance.
For example, I want to order the 955th meat grinder from them. It should be cheaper and much faster than ordering from the bourgeoisie. And you can pay upon receipt, not monthly. And at least some kind of guarantee.
Some people generally buy from the bourgeoisie, and there, in general, payment is preliminary, and there is no guarantee.
By the way, if we cooperate with someone, then it will be possible to save a little more on delivery.
I will answer your question later in a personal, find, check the new price tag and write.

I want 955 too.

[Musenovna]

Musenovna, thanks, I'll try again with knives, maybe next time it will turn out better ...
About the 955th
Reset the coordinates in a personal, - when I figure it out, I will contact you.
But once again I warn you that the delivery will be gray.

Oh, brothers!
Received a cookbook. At last!
When I ordered, I thought it was common to all CM Kenwood.
But it turns out that they sent it specifically for KM 080, that is, they send it for specific models.
So, if you order a book with a coupon, be sure to indicate for which model.
I also liked that it is described in more detail, which nozzles are best used.
How glad I am!