Kitchen machine Kenwood (2)

Again - 25!
How can you give recommendations without knowing what you are cooking, how often, in what volumes, for what period you take the equipment - with a perspective or for a year, and then you will change everything ...
It would be the same if I asked you to advise me which earrings to buy without looking at me or at my dress.

Brothers, who uses the AT955 meat grinder?
I just can't decide for myself whether to take it or still AT950 ...
There, after all, for the same power, a larger diameter is obtained, and I am tormented by vague doubts about how effective the 955 is, whether it makes sense to take additional convenience and lose efficiency at the same time. Or is nothing lost there?
And what do sizes 8 and 10 correspond to? What is the actual diameter of the inlet and outlet, please measure.

[0]

ZEElena,
I would choose KMM 020 + the desired attachments.

I did not find pure KMM 020 in the offers Nozzles naturally I will dream dough splitting, high speed, cube, cups

How can you give recommendations without knowing what you are cooking, how often, in what volumes, for what period you take the equipment - with a perspective or for a year, and then you will change everything ...
For the future, of course, there is a garden-vegetable garden, blanks, a family.

Elena, look at KM020, it's the same thing, only in a different configuration.
In Ukraine, I took KM020 purely with 4 nozzles for dough and cream, plus a glass blender.
The most minimal equipment.

I would also take kmm 020+ nozzles.
In general, one must proceed from the proposals. It is more profitable to buy 023, and sometimes 020 + nozzles. It's up to you to decide what you need first.

Brothers, who uses the AT955 meat grinder?
I just can't decide for myself whether to take it or still AT950 ...
There, after all, for the same power, a larger diameter is obtained, and I am tormented by vague doubts about how effective the 955 is, whether it makes sense to take additional convenience and lose efficiency at the same time. Or is nothing lost there?
And what do sizes 8 and 10 correspond to? What is the actual diameter of the inlet and outlet, please measure.

I subscribe to the question. I also don't know which one to take. Considering that 955 is practically not found in Moscow. On one of the sites I read that the 955 is more effective than the 950. But I think it will be possible to understand this only with both models.

Since the 955 meat grinder is a new device, you can suggestwhat is more improved, there live inventors invent. If you have something to work with, then wait a bit until reviews of real users appear.

[on their]

For the future, of course, there is a garden-vegetable garden, blanks, a family.

Then take the one for which you have the attachments you need.
At Kenwood, these are almost all the models that you are considering.
As for the power, then, in practice, only the meat grinder needs maximum power, everything else, including steep dough, any of the KM you choose will provide you with.
So back to the beginning: navigate on their needs.
And if your needs are satisfied by a number of CM, then for design, price, prophetic dream, ...

[ZEElena]

ZEElena, I, too, faced a choice like this and took 086 as a result ... because after reading, flipping through the entire Internet, I realized ... that all the same, everyone who has a cache, ideally wants all the attachments, and in the complete set 086 there were a lot of them, this time. With a garden-garden, as well as without it, you still want to try rubbing, a vegetable cutter, a potato peeler, etc., etc., etc., because you like it or not, but you become a fan ...

Secondly, the presence of a super slow cooker, which really cooks, also interferes with this, has not prevented anyone.Third, the volume should still be larger, in my opinion. Fourth, fifth and tenth - he is ready ...

You choose, this is just my subjective opinion ...

URRRAA! And I became the mistress of the super-duper unit 013 :) Yesterday my husband brought it to Komfi at 8 pm and says - for him, my dear :) I can't sleep for a month - it started with the "Wishlist" Boshik 5529, but when we went to feel it live, I didn't proper impression. But Kesha both me and my husband immediately sunk into the soul. The price, of course, is ay-yay, but for the sake of such a biscuit, which I already treated the whole family to breakfast, and such incredible convenience and reliability of the unit, it is worth spending ...
I went to read the twig again, study Kenwood, as they say, in practice :)

[majyshenka]

majyshenka,
Congratulations! And what is your 013 configuration?

[Vei]

Vei, Thank you!
Blender AT339
Citrus press AT312,
kitchen scale AT850
Multifunctional shredder AT320
Food processor AT640,
meat grinder attachment AT950
whisk, flexible beater, K-attachment and dough hook
And they took it very profitable for such a configuration 7777 UAH

+ while we bought a dough sheeter, for the future I want cubes and an ice cream maker. So far I've tried only a whisk and a hook -

[Mayan]

Mayan, Congratulations!
Indeed, for such magnificence, a very good price!

[majyshenka]

majyshenka
CONGRATULATIONS!!!!!
When will I get ...

Hello. I've already broken my whole head, but I can't understand how 080 differs from 084? help, pzhl.

The difference is in the configuration. 084 should have more attachments.

Elena, look here item 6

started with "Wishlist" Boshik 5529, but when we went to touch it live, it did not make the proper impression.

Aaaaa, congratulations .... I, too, after Vysotskaya every weekend Boshik was the ultimate dream .. and then accidentally stumbled upon videos on YouTube ... and my soul rushed ... after two years it seems to me ... bought .. so my husband he still tells everyone that this technique has been working for people since the 50s ... and I am very proud of myself, I did not even think that he would like my idea in his time.

[ellanna]

ellanna, Here I am about the same :) My husband loves good technology, Kenwood appreciated at first sight. In principle, he initiated the purchase, for which many thanks to him!
Of the advantages of the machine, I can name one that is important for owners of small-sized kitchens: in the Khrushchev 5-meter manune, the combine stands up perfectly, really saves space and increases the ergonomics of the working area ..

Dear forum users.
There is a desire to take the harvester mainly for dough. Baking bread.
There is Bosch. 500 watt. outdated model.
What do you advise, what to replace.
Toli Bosch is newer, Toli Kenwood chef. What model. What is the difference.
Is the price much different from the foreign one? I can take it there too.
I would be grateful for your help.

[pushkar]

pushkar, I advise you to go to the hardware store and touch Bosch and Kenwood. It will be easier for you to decide. As for me, Kenwood is more suitable for your purposes, because it is positioned primarily as a kneader, in the sense that it was created for this. Consider either KMS 010 or KMS 020 (the difference is in the volume of the bowl)

I advise you to go to the hardware store and touch Bosch and Kenwood. It will be easier for you to decide.

Thank you so much.
If they were a magician. together. Our choice is minuscule.

Even if these combines are in more than one store, you will catch the difference immediately. But this is my personal opinion

If you need a purely kneader, then you can take quite budget models from other companies.
For example, there are fully metal kneaders of different volumes for a quite "calm" price such as Boman, ProfiKuk and others.

Hooray on Wednesday they will bring me 023 !!!!!

For example, there are fully metal kneaders of different volumes for a quite "calm" price such as Boman, ProfiKuk and others.

If possible, then more specifically by model or link. I will be grateful.
Rather like a kneader. And Boshev's latest 1400 watt models, won't they fit?

Why does the mixer need such power? This is for a meat grinder you need more powerful, and the dough, even very steep, you and less powerful will knead well.
Although, if you have large volumes ...
Models and links will be posted in PM.

Why does the mixer need such power? This is for a meat grinder you need more powerful, and the dough, even very steep, you and less powerful will knead well.
Although, if you have large volumes ...
Models and links will be posted in PM.

.
Thank you.
I have a Bosch-550vat. Honestly, not enough. It is felt by the sound. Working hard at second speed

I got the link. Thank you very much. I will study.

Hello everyone, can you please explain to me in more detail, is a medium-speed nest in Kenwood so vital? What is it for? We have only the KENWOOD KMC 570 model on sale, the delivery is not expected yet, the price is 29799 .... Maybe someone has it? Tell me plizz

And, here's another KENWOOD KM289 for 13909r., But as I understood it from the Prospero series, it is small-sized, and its power is less ...

Hello everyone, can you please explain to me in more detail, is a medium-speed nest in Kenwood so vital? What is it for? We have only the KENWOOD KMC 570 model on sale, the delivery is not expected yet, the price is 29799 .... Maybe someone has it? Tell me plizz

I have one. I'm glad. And I do not suffer from the lack of an average nest)

I'm in trouble !!! I made the sauce in a mini grinder and did not spin the glass well. Bottom line: some of the liquid leaked out. It seems that practically nothing got inside, mainly the sauce spilled out around the nest. Don't you think it's scary ?! My husband offered to spin the upper part of the nest to make sure that nothing was numb, but I was afraid that something would be disturbed. And as they say, trouble does not come alone. The bottom from a mini chopper, which cannot be wetted, was washed by the mother-in-law under the tap. ((((it is drying now on the battery. and what will happen now ?! Maybe someone had something like that ?!

[Musenovna]

Musenovna,
with the bottom from the mini chopper, nothing terrible should happen - ours bathed repeatedly. Most importantly, dry well before using it. As for getting inside the high speed nest of sauce - try looking from above. There is no personal experience, therefore, I do not presume to assert, but something tells me that I can safely disassemble (unscrew two screws) and check. If spare parts are sold. parts, including this plastic pad and pin, then there should be no pitfalls.

is the mid speed nest in kenwood so vital? What is it for? We only sell the KENWOOD KMC 570 model

I have 570 and 3 years I did not suffer from a lack of this nest. But now I ordered a separate Phillips blender, because it will be much more expensive to change the car.

Bottom from mini shredder that cannot be wet

And which bottom of the grinder cannot be wetted? : pardon: I wash absolutely all the parts in the dishwasher from the mini chopper.

[kseniya D]

kseniya D, and I had a blender included. But I don't use it.

I do not mean a tall glass blender (I have one), but for a medium-speed socket that comes. Round, with knives. For shortcrust pastry I want. And, in general, recently many recipes have come across where just such a blender is used.

Ah, this is a food processor with knives. Got it.

[Ksenia,]

Ksenia, think carefully, if you still have the opportunity to replay: A hand blender is much more convenient than a bowl with knives inside.
For example, mayonnaise, nutella is difficult to pick out from it.
And if you need to make a puree soup, then pouring boiling water back and forth is not convenient, and dangerous.
And submersible and wash much easier and more convenient to use.
For example, I didn’t want to take the mixer to Kesha at all, because I had experience, and I knew that I would only use the submersible.
But it came in the kit, and without it I simply could not find it.
That is, I found it, but it was more expensive without a blender than with it.
So once again the suspension, which one to take.
Now I looked at what Mashenka wrote, I realized that you were not writing about the blender, but about the processor.
Clear.
I had a Filya harvester, a well-made processor. I stood idle for several years, and I mixed the shortbread dough with a mixer with soft butter.
Musenovna, do not worry: it will dry out - it will be as good as new.
And if your spouse has both right hands, then let him look carefully so that you feel calmer.
And don't be angry with your mother-in-law, she helped you out of the best intentions. Now she probably even got a ticket to a holiday home for a month for helping with the housework. And just during this time you will calm down and forgive her everything ...

I have a submersible. I want such a processor and, by the way, settled on Phil. Sometimes it seems to me that there is no urine: plach7: And, in general, I usually use all the equipment that I buy. Not worth idle. Therefore, the husband is quite calm about the new purchase.

[Ksenia]

Thank you girls for your support !!! Calmed down. I will dry the mini chopper and spin it more carefully next time. By the way, it is not very conveniently made in terms of pouring everything into a glass, and then it is difficult to exactly twist this very bottom. I wanted her so much, but something has not yet impressed me with this nozzle. I tried to grind a cinnamon stick, so he didn't want to grind it entirely, I had to break it into smaller pieces first. With the sauce, the trouble came out. In general, I have not made friends yet.
Ksenia, I think you can do without this socket. As for the shortcrust pastry, the K-nozzle does an excellent job with it. And shredding can be replaced by a high-speed slicer.

I'm in trouble !!! I made the sauce in a mini grinder and did not spin the glass well. Bottom line: some of the liquid leaked out. It seems that practically nothing got inside, mainly the sauce spilled out around the nest. Don't you think it's scary ?! My husband offered to spin the upper part of the nest to make sure that nothing was numb, but I was afraid that something would be disturbed. And as they say, trouble does not come alone. The bottom from a mini chopper, which cannot be wetted, was washed by the mother-in-law under the tap. ((((it is drying now on the battery. and what will happen now ?! Maybe someone had something like that ?!

When I chopped the rubber band, I also poured some of the sauce onto the car, wiped nothing with a rag, did not close the nest for the night, everything dried out (ugh, ugh, ugh, it already works so much. and after the sauce you need to wash it like that. Everything will be fine !!!

and then it is difficult to exactly twist this very bottom.

This comes with experience ... although I was also a little disappointed ... bought for baby food ... now sometimes I make mayonnaise ... it's cool that you can leave it in a jar. And sauces are easier to submerge.

Knives, too, were always washed in the dishwasher, only now I was thinking whether or not, but there really is an alloy inside that should not be washed.
As for the overflow, I often had, especially at the beginning, something overflowed, but this did not affect the operation of the machine, so do not worry too much.

Ksenia, I think you can do without this nest. As for the shortcrust pastry, the K-nozzle does an excellent job with it. And shredding can be replaced by a high-speed slicer.

I know that you can do with a K-shaped one, and I do so. And I have a high-speed one. But sometimes you have to grind, say cookies, for the backing of the cheesecake, but nothing. It comes through a meat grinder, and the output is very small crumbs. And recently it was necessary to grind a decent amount of nuts, but again not into crumbs, but coarsely. I had to make several bookmarks through the mini shredder.

I know that you can do with a K-shaped one, and I do so. And I have a high-speed one. But sometimes you have to grind, say cookies, for the backing of the cheesecake, but nothing. It comes through a meat grinder, and the output is very small crumbs. And recently it was necessary to grind a decent amount of nuts, but again not into crumbs, but coarsely. I had to make several bookmarks through the mini shredder.

Is there a blender with a bowl ?! I do this in it. Of course, it is difficult to achieve the same crumb, but in general nothing.

This comes with experience ... although I was a little disappointed too ... bought for baby food ...now sometimes I make mayonnaise ... it's cool that you can leave it in a jar. And sauces are easier to submerge.

Knives, too, were always washed in the dishwasher, only now I was thinking whether or not, but there really is an alloy inside that should not be washed.
As for the overflow, I often had, especially at the beginning, something overflowed, but this did not affect the operation of the machine, so do not worry too much.

I also bought it for baby food, but I don’t make baby food there. )))

Is there a blender with a bowl ?!

I only have a glass, tall one, which is for liquid products. And with a bowl, no, because there is no medium speed nest.

I only have a glass, tall one, which is for liquid products. And with a bowl, no, because there is no medium speed nest.

I'm talking about him. I grind cookies, breadcrumbs, etc. in it.

Yes, but the instructions say that you can't use it without liquid? So it never even crossed my mind to try.

Yes, but the instructions say that you can't use it without liquid? So it never even crossed my mind to try.

I specially took out the instructions and it says (I have a heat-resistant glass one): using a blender, you can make soups, drinks, pates, mayonnaise and bread crumbs, and grind nuts, cookies or ice.