Kitchen machine Kenwood (2)

Good day! Can you please tell me, is 1200W power enough to knead dough for dumplings and noodles?

We were just raising the issue of kneading a tough dough. It depends on which model of the combine. In principle, everyone can cope, but some models "sausage" more. For such an amount, she is worried about something that does not break

I'm interested in this one: Kenwood KMM 770 10 Major Premier. Unlike the 20 model, there is no mid-speed jack, and the power is 1200W. or still take 1500 W? for active home use, dumplings and manti are very popular.

It's hard for me to say, I have 080. Of course he kneads such a dough, but it's very sorry for him. The whole shaking goes. But in principle, at the lowest speed it copes with its task. They wrote that 010 behaves better. Nobody seemed to complain about 020 either. But I do not presume to assert. Maybe someone from the users will tell you.

On a dense dumpling dough, 20 also jumps at 3rd speed. On the 2nd it is normal.

interested in this one: Kenwood KMM 770 10 Major Premier

I have a KMM 570 with a smaller bowl than 770 perfectly kneads dough on dumplings and pasta, for this I bought it. Nothing twitches or jumps during kneading.

thanks for answers! in short, you can, just be careful.

On a dense dumpling dough, 20 also jumps at 3rd speed. On the 2nd it is normal.

Girls, according to the instructions, the tight dough does not knead at the third speed)))
Maximum for the second ...

On a dense dumpling dough, 20 also jumps at 3rd speed. On the 2nd it is normal.

Oh, and I only bring dense to the 1st, and then I worry about ...

I have a KMM 570 with a smaller bowl than 770 perfectly kneads dough on dumplings and pasta, for this I bought it. Nothing twitches or jumps during kneading.

I confirm! My 560 also does not jump when kneading dumplings)

girls from Moscow who transferred the money, was in the bank today, they said they do not transfer it in hryvnia, or rubles or dollars, and the money will not come to the card ... how and where did they transfer? and most importantly, if not in hryvnia, how to calculate how much to translate

girls from Moscow who transferred the money, was in the bank today, they said they do not transfer it in hryvnia, or rubles or dollars, and the money will not come to the card ... how and where did they transfer? and most importantly, if not in hryvnia, how to calculate how much to translate

Translated today in a private bank, they also do not transfer to the card, only to the name of the bank. I translated rubles, they said that they were converting there, but they didn’t transfer them correctly at the exchange rate, it turned out to be little, what kind of bank employees

so I'm interested in how to translate so that it is enough ... I could not count ... but can I not in a private bank? somebody knows? otherwise I have here who makes the transfer the golden crown, but this is not a private bank ... and there, as I understood them, simply by the name of the transfer and receipt according to the document ...

I called a private bank, they told me that if you pay through the golden crown, it doesn't matter through which one, only if in a private bank, then without interest, and if somewhere else, you have to pay interest. so I made the transfer in a coherent one, they also do it through the golden crown, they took 2% for the transfer, it's cheaper and faster for me than in a private bank. I hope everything will work out. they said that you can get it in a private bank, but you can get it in any other where there is a golden crown.

Girls, good evening! All a Happy Women's Day !!!! Can you find out in Kazakhstan, Aktobe, can you deliver such equipment? We liked your feedback very much.

[ASS]

ASSWhat kind of Vavs apparatus are you interested in?
There are so many different models.
In order to decide, you must first understand your needs, and then carefully read the threads dedicated to the choice of CM in general and CM Kenwood in particular, if this particular company interests you.

Olga, I read all the reviews, and I would like to have a meat grinder in it, I have it, but it doesn’t run veins, it needs to be opened 2 times, a mixer, a potato peeler, we Kazakhs love beshka, so the dough, I read this device itself understood), chop vegetables, for every day, the most important thing is that it is small. These are the requests, well, if it works, I would like to purchase.

I would like to use such a device every day, not once a year. Whenever possible, I use recipes from the forum, there is not always enough time either. Therefore, I want not big.

[specific]

Look, only Kenwood has several dozen models:
🔗
Other firms also have a lot of models. Some of them discussed here, but this is not a complete list.
Therefore, you first need to somehow study this issue, choose at least a group of machines that might suit you, and then ask specific questions about their characteristics in order to determine the final choice.
After all, there are many models that knead the dough, roll it out, chop the meat, and do much more. And you must agree: the concept of "small" is different for everyone.

Hello everyone. I want to give my wife a Kenwood km 084 kitchen machine. I can’t find any reviews. At first I thought to buy km 086, but it costs 70,000 rubles, and this one can be bought for 49,000. I climbed on the Internet and saw that the difference between them is what is included in the kit, because in 084 there are only 5 mixer nozzles. But the price tag is a big difference is this normal? and how is the car in general? Thank you in advance.

[Serglez]

Serglez, check out this topic, there is a lot about the 080 series.
And you can buy a complete set 086 for 54 sput, and with us and with an official guarantee.
And 084 is only gray, that is, with an unofficial guarantee, but, indeed, cheaper - from 46.5tr.
And the car is beautiful.

Yes, for now, at the expense of the nozzles, we think that the cube cutter is a cool thing))) We also think about taking a nozzle for sifting and wiping, an ice cream maker and for now)) well, in general, I would like to take a citrus nozzle, but for now I think)

Today I made mashed potatoes and stews (vegetables and chicken). Something like chakhokhbili. I marinated the chicken with spices and chopped tomato, then chopped onion, garlic, chili, bell pepper in a blender. I mixed everything with chicken and put it in kenwood))) It turned out great)))) I boiled the potatoes on the stove, decided to beat them on a spherical whisk, but did not crush the potatoes first. It turned out of course not as I wanted, there were still lumps. And I add mashed potatoes, butter, cream and milk, sometimes it's cool with the addition of bacon)

Brothers, help me figure out what I bought ...
The box says AT955, but there are questions about the characteristics of the official site.
For example, at the office. the website says that it weighs 2.9 kg, and it is not clear whether this is net or gross.
Most likely net, but then is it the total weight of the whole set or ...?
I have a meat grinder itself with an auger, a knife and a grate, without a tray and a lid, weighs 1,392 kg.
For comparison, according to the characteristics of the office. site AT950 should weigh (net? gross?) 1.6 kg.
They must also differ in diameter.
I have discs with a diameter of 69 mm, the inlet is 55 mm outside and 50 inside.
The overall dimensions also do not even closely correlate with those stated at the office. site, but there, probably, along with the tray, dimensions are given.
Also, when I tighten the nut without a knife, it sits freely until it stops, and when with a knife and with a grate, it does not reach the stop about 2 mm. At the same time, the same gap is formed inside, respectively, where products will most likely be hammered. It is right?
In general, a big request to those who have AT950 and AT955: please weigh the attachment with a knife and grate, but without a tray, and also measure the diameter of the grate and inlet.

Katyusha, she was terribly worried, so she divided everything by 2 times and made the right decision, those who had a small bag or backpack were not inspected, but were "cowardly" with travel suitcases.

I understand that we were also worried about you here. And even more for you than for the attachments.
God forbid, next time everything will go well.

Good day! Please help me with a choice, I wanted a noodle cutter for myself at first, I was already going to order, then I saw a video of how cleverly they make noodles on Kenwood, and now, I sit and suffer, maybe it's better to immediately Kenwood? I also want a dough kneading machine (as an alternative to a bread maker). And so much has already been read here on the forum about atlases and all that stuff, eh ... In general, the question is: are the nozzles convenient for rolling out dough and cutting noodles, how are things going with kneading different types of dough, which model is better to choose. I ask, because I can’t master a hundred pages of this topic. Maybe someone else knows about kitchen aid for these functions?

[Ne_lipa]

Ne_lipa, I have kenwood. I am very pleased. Replaces many individual fixtures. I'm waiting for my rolling and noodle cutter. I can't say anything yet, but whoever has it is happy. You know better about volume. You can buy 010 for small volumes, 020 for larger ones.
Kitchen also looked at it, but it seemed to me less functional.

There are also Kevud 570 and 770.

Do all these kenwoods work with dough sheathing attachments? I just need such a Kenwood so that the dough is well kneaded (for rolls, for dumplings, biscuit) and the attachment could be attached to it for dough rolling, all kinds of cuts, graters, potato peelers are not of interest at all, I personally find it easier to cut by hand or on a regular grater, here. It's just that the more attachments, the more expensive it is, but I don't need all these additional functions ... I started looking at prices on the internet, but I still want to

The only difference is some have a medium speed slot, while others do not. The low speed that interests you is in all. In general, you can buy attachments later.
I really like the glass blender. I may not use it every day, but every other day for sure. A food processor attachment is also included. Especially when you need to grate or cut for borscht, for example. It used to take a lot of time + time to clean the kitchen. And now, in 30 seconds, 5 carrots (for borscht, for salad, and for carrot pie).

But there are such Kenwood models that can knead the dough for a small amount of products, for example, 350 grams of flour for yeast dough?

You need a model with a 4.6 liter bowl.
This is kenwood 010 and 570

All Kenwoods are kneaded to a minimum volume. As well as whisk one protein. And the maximum is different.

Tell me, what is the maximum amount of flour that can be loaded into Kenwood KMC010? I am planning to make dumplings. And yet, do you need to download all the components at the same time or is there a sequence?

These recommendations can be found in the documentation supplied with your machine and in the recipe book.

[Olga VB]

Olga VB, only thanks to your help and personal participation, UR-A today received a registered parcel with a book of recipes in the mail! Yes, it's also for my induction machine. Now, then I'm like Pechkin from a cartoon with a bicycle! Olenka! low bow to you!

You need a model with a 4.6 liter bowl.
This is kenwood 010 and 570

Please tell me, do these models actually work with what is the smallest test volume? I will not do anything on an industrial scale, but I would like to know the lower and upper limits, just not what is written in the instructions, but what comes out in practice. Is model 010 (570) a full-fledged kneader, is it possible to make a biscuit for 3 eggs, or beat a couple of proteins, knead the yeast dough for 300 g of flour, for 700 g of flour, how are things with the dumplings dough. Sorry that there are many questions, but there is simply no energy to read the entire thread. I've already read so much here on the forum about kitschen, Kenwood ... the more I read, the less clarity.

Is model 010 (570) a full-fledged kneader, is it possible to make a biscuit for 3 eggs, or beat a couple of proteins, knead the yeast dough for 300 g of flour, for 700 g of flour, how are things with the dumplings dough.

It is a dough mixer.
It is possible for both 300 and 700 g of flour
You can have a couple of proteins, and 10
Pascu mesh only with them KM 010
And everything is fine with dumplings

Please tell me, do these models actually work with what is the smallest test volume? I will not do anything on an industrial scale, but I would like to know the lower and upper limits, just not what is written in the instructions, but what comes out in practice. Is model 010 (570) a full-fledged kneader, is it possible to make a biscuit for 3 eggs, or beat a couple of proteins, knead the yeast dough for 300 g of flour, for 700 g of flour, how are things with the dumplings dough. Sorry that there are many questions, but there is simply no energy to read the entire thread. I've already read so much here on the forum about kitschen, Kenwood ... the more I read, the less clarity.

What is written in the instructions is what it really is. Perhaps there is no minimum, but the maximum still exists. Moreover, the maximum for dumplings dough personally in my car is slightly less than described in the instructions. This is a complete mixer, but for home use.

fewer pages because your Lisenok was sent to the bathhouse for an ad for the sale of baits

[tatiana_30]

tatiana_30 she is lisenok, you were banned for spam in a variety of topics that are not suitable for sale on the forum.
Why do you continue to violate the Forum Rules and create a new account?

I would caution you to buy anything from people who use these methods. I hardly have to vouch for honesty.

[lisenok]

lisenokThank you very much for the attachments! I received everything, Elena gave me everything yesterday, my dream has come true.
PS Chef, forgive us if you broke the rules, do not scold everything works great. If it were not for the Fox, then I would not have had this happiness soon!

I join. True, the boss gave me a verbal warning for gratitude.
Who managed to download the instructions for the dough sheeter share pliz.

[Katerina]

Katerina, look at the topic working with Kenwood nozzles, there is a link.

I join. True, the boss gave me a verbal warning for gratitude.
Who managed to download the instructions for the dough sheeter share pliz.

Why do you need instructions? Is everything clear in the same place? If you have any questions, ask!

Found, thanks
I have a fad, until I read the instructions for the technique I do not fit.

Girls, and someone bought something in a sotomarket, otherwise I want to take 20 cash from them, and their price is attractive, but I don’t know a normal store or it’s worth buying from them.

I took phones from them, first for myself, then for the child. i like the store

sotmarket can?

The goods were delivered to me twice in Ukraine. Long but delivered.

is healthy, so tomorrow I will order from them. otherwise I have been thinking all day today to take from them or not.

Why do you need instructions? Is everything clear in the same place? If you have any questions, ask!

Questions have appeared. I read the instructions, but I still don't understand at what speed to roll out the dough ?!