Washing machine: which one to buy

The 3-year warranty for Atlant is captivating, although the master does not advise.

so she bribed me for something more expensive, anyway, there was no money, I voiced my thoughts to the master, I figured out what a daily wash would be for me at the price of a machine and we decided that even if it crumbled right after three years, then I still won't lose anything. especially since my mother has been plowing for many years without a single call from the master

Today I bought an Atlant, also with 16 programs and a sneaker wash

Marina, and write what model, pzhl.

Posted on Wednesday 27 Apr 2016 11:43 AM

My something also began to emit extraneous sounds during spinning,
Can it be time to change again?

Len, if you still want to use the machine, you need to change it as soon as possible. I pulled until the last, in the end, there the bearing was completely worn out, the drum was removed for repair, soaked, more cho it was welded to us to death. The master said that you can't run like that. (

[Elena Tim]

Listen, folks, how do you know if the car you are selling has a collapsible tank?

Elena Tim, Lenochka, there is only one algorithm: you write down the name of the washing machine you like and call the SC. They know there. You can also look at the "trunk" with this question in the profile topic. There are enough experts there.

Marina, and write what model, pzhl.

ATLANT СМА 50У82-010
I clarify: there are 15 programs (I made a mistake), today a test flight will be
I was more guided in my choice by the presence of protection against voltage drops, a collapsible tank and, of course, the price

I looked for information and reviews about Atlant. Many people write, a very noisy spin, and even jump can ...

Nonsense, the pumps make the same noise for everyone. The closed door cannot be heard. During spinning, a vertically installed matchbox does not fall at 1000 revolutions. The upright cigarette falls. At the same time, there is a machine on linoleum!

You can also look at the "trunk" with this question in the profile topic.

What is a "trunk"

[Omela]

Omela, if possible, then take a full-size one (without the letter "U"). Fullsize is more stable. This applies to ALL models and brands.

Added Wednesday 27 Apr 2016 12:01 PM

What is a "trunk"

Form iXBT. There is a very large branch for washing machines, and for different models. He helped me a lot with the choice.

For a seed, go to this page that I have saved.

🔗

[Wit]

Wit, I see, thanks.
As for me, it's better for me not to go there ... I'll still be upset
As they say, "it's too late to drink Borjomi", the choice is made, the beast is in the stall

[Marinka]

Marinka, Thank you!

if possible, take a full-size one (without the letter "U").

Wit, thanks, that's what I wanted. I chose this one.

🔗

[Omela]

Omela, how did they rise in price !!! If you are not strained with money, then look also at ... С1010. She is with aquaprotector and 1 program more. However, overpaying 4000 somehow doesn't inspire.

Here in great detail from the 30th page and informative: 🔗

Well, you can take a walk and watch videos. How they do it: 🔗

Vit, thanks! No, I was just strained with money. (((((I had no noise at all (my drum was pounding so much that it was impossible to talk in the kitchen), I don't care about the number of programs) (I use 2-3). The main thing is to wash well and did not break in a year.

Good luck to you!

Len, if you still want to use the machine, you need to change it as soon as possible. I pulled until the last, in the end, there the bearing was completely worn out, the drum was removed for repair, soaked, but it was welded to us to death. The master said that you can't run like that. (

What are you? And I sit quietly ... Thanks, druhh! And then you really have to buy a new one, and then the price is aaaa! ...

Helen, there is only one algorithm: you write down the name of the washing machine you like and call the SC. They know there. You can also look at the "trunk" with this question in the profile topic. There are enough experts there.

Oh, Vit, thanks, my dear! I will definitely do so.

today visited several local stores, mostly LG horizontal everywhere
from vertical boxes, or whirlpool, bosh, zanussi
Atlanteans for some reason do not carry at all

And they didn't. Only in online stores. And why don't they carry it, try to guess three times.

Mams, Olenka, now you simply must share this rare jewel with us.

Lena, I would love to, but unfortunately, the phone of this wonderful person was lost. This is how we usually do not store what we have

A! Doctor ... water! 🔗

Lenushka, my dear, do not be upset. The saddest ..

And they didn't. Only in online stores. And why don't they carry it, try to guess three times.

yes I asked) of course there were all sorts of excuses ... then the brand is not promoted, then what else
just along the way for the same LG they wind up well for the price
it is also strange that they can bring any to order except Atlanta)

Lenushka, my dear, do not be upset. The saddest ..

Yes lan, I'm kidding, Ol. Tomorrow I will call from Iceberg, I like how they work.
Hospad, at least there will be an excuse to bring a shmon behind the typewriter, otherwise tamaaaaa ... Once again, you will not drag her from place to place ... and not too much - too.

[Alex100]

Alex100, your train of thought is correct). Belarusians do not give kickbacks for promotion. So why sell the area to occupy Atlanteans, if "skis" pay well.

[Alex100]

Alex100, Atlanta top-loading washers do not produce 🔗
Alternative Polish Electrolux or Slovak Whirlpool.

[sazalexter]

sazalexter, I'm just choosing a top-loading machine. Which one do you recommend?

[sazalexter]

sazalexter, well, actually, there are still miles ... just at one time I looked - in size like a narrow front camera, but the toad strangled a little and the fact that nothing could be put on top ...

[Anna1957]

Anna1957, Anna, bought in August 2015 Electrolux EWT 1066 TDW https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=68115.700 Polish assembly https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=68115.820 very satisfied.

[Anna1957]

Anna1957, Anna, bought in August 2015 Electrolux EWT 1066 TDW https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=68115.700 Polish assembly https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=68115.820 very satisfied.

Thank you. I need a lot of dishwasher recommendations. I seem to have decided on a refrigerator.

[Anna1957]

Anna1957, Anna, "trash" is the same AEG or Electrolux, maybe Bosch, I won't tell you about the model. AEG has super quiet "dumpsters" for those who wash dishes at night, for example.

For some reason I am drawn to Bosch, the very first compact has been working for more than 15 years without a single breakdown. Then there was Candy, it also does not break, my son is 2 years old Bosch, but my Candy-trio is periodically clogged with fat, I have to clean it with a Mole. With others, such problems did not arise. This is despite the fact that I am on a diet, I practically do not eat fat where it comes from

[sazalexter]

sazalexter, Alexander, I read your reviews on verticals, so to speak for the future. Thu-thu three times, even if it won't come in handy soon. And then I remembered the last time I called the master, he said: "You think about changing the typewriter, just don't take the vertical!" It seems to me that they do not advise what they do not know how to repair
Anna1957, Anna, I have a Bosch dishwasher for about two years, I am very pleased with her, she washes well, she has never been clogged with fat yet, quiet, so I always put a "wash" almost at night

[Alex100]

Alex100, Atlanta top-loading washers do not produce 🔗
Alternative Polish Electrolux or Slovak Whirlpool.

Alexander, thanks)
But there are practically no vertical units available ... the whirlpool did not look, and the electrolux is only on order and the price is certainly not small
it turns out like 2 Atlanta
And the washing machine through the Internet store is still somehow scared to order

[Alex100]

Alex100why? If the store is reliable ... I ordered a refrigerator and a gas stove through the store base - everything was delivered perfectly and the equipment has been working for more than 10 years. But there you need to know exactly which model you need.

[Svetlana]

Svetlana, yes, where I ordered before, there are no required models
In principle, there are discounts on ozone, only they have never ordered large items

[Alex100]

Alex100, Look at here 🔗)

[Alexander]

Alexander, Thank you
You can make delivery from them to me, since the nearest store is 100 km away
and of course there is a great choice

In Citylink it is cheaper.

For some reason I am drawn to Bosch

I have it exactly), Boshik, 5 years old I understand that 5 years is not an indicator, but still)) already rattling, t-t-t ...

a washing machine through an Internet store, after all, it's somehow scary to order

I have all large household appliances, although why only large ones ?! And small too, from online stores, I have no complaints ...

In my case, online shopping is a good help, I live in the village ...

In Chisinau, we try not to take anything in ordinary stores - they will definitely slip something in (faulty, replace what they chose in the store and deliver something else). Therefore, for several years now we have to use the services of online stores. Until pah-pah ...

Hello everybody. Today I finally freaked out. I just came to my senses))). Maybe she was in a hurry. In short, I bought LG F80B9LD. Nothing extra. Inverter, without a belt, the program is the necessary minimum, I still have not penetrated in detail. Although today I tested it on some rags, at the same time I drove away the factory dust - and it seemed that I wanted to spin more abruptly, of course (declared - max. 800). Although I exhibited 600, maybe at max. will be enough. Girls, can anyone have it, share it, I won't regret it? I am spoiled by Indesite 1040 for two waters, with drying, so I want the "new one" to satisfy. So far I don’t know ... When I was going, I planned a thousand for 5, but I bought it for 8.5))) ... This is about 350 USD.

In short, I bought LG F80B9LD

I also have LG - however, different markings. It was purchased in January 2003 and has been plowing for 14 years every day. I called the master last year (to clean the drain) - so he "made me happy" - he says that the machine has worked for 10 years and will work for another 10 years. Reliable, infection!

Lenochka, a car in 2003 and a modern one, these are two big differences)). I am familiar with the quality of the equipment of that time (at the very eighteen-year-old Indesite!) Now a completely different approach, which is sad ...
And I am worried if 800 rpm is not enough at maximum? .. There were her "sisters" at 1000-1200 rpm, but more expensive ... I don’t know if I was in a hurry? .. Although the machine itself seems to be decent in terms of functionality. ..

I have just 800 rpm - it squeezes great. As for the programs - even if there are 1000 of them, in fact we all use a couple of basic, most convenient ones. My friend LG, however, is only 4 years old. I'm also happy. You have a 10 year engine warranty. It says a lot. You bought a great assistant.

Added Saturday 28 May 2016 09:15 AM

And why do you need 1200 rpm? Tear the buttons off your clothes? Still, 800 turns are safer for fabrics.

Not enough. We rarely use 1000 rpm: the engine is less stressed and the laundry is more intact. Scrolling it 1000 times 5 ... 6, traces of tissue destruction may not be noticed. And for the 8th time ... How long can you endure such "mockery" of sheets with blouses? Of course, the laundry will be practically dry. But, during the night it will dry even when spinning at 800. I have comprehended these wisdom on the "trunk" - a lot of debates on this matter were there.
I was in vain, I just had to give a link confirming that I was right

🔗

If you search in Yandex with the request "spin modes in the washing machine", you can find a lot of interesting things. I warn you about the recommended jamb to wring out terry clothes at 1000 - ditch the terry. It is generally better not to wring it out - let it drain and dry. For a long time, of course. So good luck, Inna!

Added Saturday 28 May 2016 09:31 AM

You have a 10 year engine warranty

Everybody gives a 10-year guarantee for the engine, there is practically nothing to break. It's like a bicycle warranty: for a bike itself - 1 year, and for a frame - 10 years or for life.

- On the one hand, the reliability of "vertical" washing machines is theoretically higher than "frontal" ones. This is due to the fact that in them the drum is fixed on two sides, and not on one, as in front-loading devices. Naturally, this affects the service life of other parts, for example, bearings, which in "vertical" devices are "spaced" to different sides (in accordance with the drum mountings).

This nonsense alone is enough to make the article somewhat doubtful.

Scrolling it 1000 times 5 ... 6, traces of tissue destruction may not be noticed. And for the 8th time ...

Yes, at least 28. If the spacious machine inside is arranged correctly, and the user has not crammed the linen "from his feet", then everything will be fine. A small amount of linen stretched along slightly protruding grippers can be squeezed out as you like - this is almost equivalent to spreading it out on the table and on top sit down press down with a load. Classic hand twisting is many times more traumatic.

For 9 years now I have been squeezing almost everything by 1200 so that there is less powder in the laundry. At first, after reading similar horror stories, I was also nervous and used 1000, then stopped, watching the linen (and shabby from the old times too). Now I put a thousand or even eight hundred plus light ironing only for one linen - for curtains. Just in case.) If some nylon suddenly breaks, then you can never straighten it.
And sometimes I regret that there is no 1600 in the car.))

And so, if on the subject ... then even 800 revolutions is much better than squeezing by hand

This nonsense alone is enough to make the article somewhat doubtful.

The categorical tone of your post is enough to doubt it somewhat

Yes to your health.)) Just do not write at every step that you allegedly read Iksbt. If you don't remember anything about what is repeated there from year to year, including by the repairmen.

I also freaked out (read reviews) and bought the cheapest Kandy (40cm). The instructions say that you did not compromise and bought the best, congratulations!))))))))))) Let's see ...

I also freaked out (read reviews) and bought the cheapest Kandy (40cm). The instructions say that you did not compromise and bought the best, congratulations!))))))))))) Let's see ...

By the way, Kandy with vertical loading has been working for 9 years without any complaints.

I squeeze out almost all the linen at 1400, I put on some shore - 1000. I do not overload the machine and the linen is in complete order.
Previously there was a machine for 800 revolutions, so she pulled the threads out of socks with her washing and spinning

Just don't write at every step

I will decide what to write.

On the trunk there is a persistent misconception about Elektorlux verticals, as if the company does not manufacture them but orders them from Brandt.
The facts tell the opposite 🔗 In Oławska, the plant manufactures various types of machines, including Front loader (front-loading), top loader (top-loading) and small compact models.