Choosing an electric meat grinder

or medium, and the onion is necessarily small-small. I hate large pieces of onion, neither in dumplings nor in cutlets. Only in large manti can I eat.

sistra !!!!!!!!

And on the cutlets on which wire rack?
Devuli, tell me, please.
I grind everything on fine, but it turns out that in vain. Last time I ground so meat into dumplings that my husband coughed from dryness. That was a disgrace!
Devulki, pasibki.

I read it. Thank you, my darlings!

[large.]

large.
What meat to scold on dumplings?

Only large

Added on Tuesday 10 Jan 2017 09:18 PM

And on the cutlets on which wire rack?

And for cutlets - large

In general, I do not like minced meat on a fine one, it is not clear what happens.
It would be better to cut finely, but it takes a long time)))) Therefore, we twist it on a large one.

[Rituslya]

Rituslya, Rita! When you turn the meat on a fine wire rack, the pieces of minced meat in the dumplings after boiling turn out to be as if glued together, like in ready-made dumplings at 100 rubles per kilogram (and from what there is this "minced meat" is generally unknown). And the cutlets on a small lattice are also plump. I don't like such people at home, so you need to focus on the tastes of your family.

[300]

and looked at Gammu from behind the mill.

I am reading. But it's embarrassing that the rated power of Gamma is 180 watts for the one that is a combine with a bunch of attachments, where there is a mill (I want to grind spices and cereals for bread).

I decided to "play" with Gamma 7-01 ...
I looked for a used one on "Avito" and "Yule", I managed to assemble almost a complete set of 1 (the coveted mill is available) and two motors, one of which is clearly knocking, from parts for 1000 rubles.
Naturally, the plastic turned yellow .....

I tested a meat grinder on a broiler breast, onion and bread (the knife is dull and the grate is dull), and there was no pusher.
I can confirm that the meat grinder sucks in slices of loose broiler breast 4 cm wide and 12 cm long at second speed, but when it starts chopping meat, it does not push, but buzzes louder.

I tested it on a shredder, the shredder turned out to be sharp, carrots can be shredded into Korean carrots, and salted, as it rubs with medium stripes (that is, narrower than on a standard large shredder).
I chopped the cabbage on a slice, cutting for sourdough, I liked that you could chop the second time if you got large pieces during the initial shredding. But if there is experience in the arrangement of cabbage, then there are very few large pieces (a couple of spoons) per 800 gram head.
And the pusher must be done carefully, otherwise the grater can "chop" it too (although it was the same in the other meat grinder / shredder)

I will test the mill on herbs, but later, because it was for them that I wanted it (first of all) ...

I'll see in a month how the device works.

I took a used one so as not to pay 3500 for a new one (I was very afraid to be disappointed in the power of 130 watts), I gave it up for everything 300 (meat grinder) with motor+500 (loose motor with shredder, grinder, dough roll for dumplings and can opener)+150(three new bushings)

Good evening!
About a couple of times a year, I am puzzled by the purchase of any equipment for the house, and now it's the turn to the meat grinder. Once I gave my brother, on my wedding anniversary, a Selmer meat grinder in full set, like Admin's. But since then prices have increased and I began to look towards Axion 41.0, but I found such testing 🔗 and was puzzled. Question to the owners of axions, do you also have such minced meat grinder?
Py. Sy: I really want to be convinced.

Hello everybody! Maybe there was already a lot of pages. At one time, the identity was puzzled by the purchase of an electric meat grinder. I reread a lot of different opinions, forums, and settled on Braun Power Plus 1300.Why on it? And knives and attachments are suitable for it from ordinary Soviet manual meat grinders. And this gadget has been serving me for 8 years already (pah-pah-pah) and I can't get enough of it.

I'll tell you about my meat-grinder epic.
I ordered a Vitesse VS-707 meat grinder at Ozone. Received. I printed it out. A meat grinder with two speeds, a metal sleeve for the auger, the power is good, 3 perforated discs (the main thing is a small one, for me it was important) but I searched everything, but I did not find a sausage and sausage attachment (it was drawn in the book, it was not available) It was important for me, because she took me to the meat grinder for stuffing sausages. The plastic is very flimsy. The case is not very attractive. It's a pity the knife didn't look for a complete impression.
In general, I refused the parcel due to an incomplete set.
Well, since the meat had already been bought, I went to the CSN to buy the UNIT UGR-457 meat grinder I had looked after for a long time.
There was the whole set, three discs, attachments for sausages and kebe, two speeds, a very nice body (metal), a metal sleeve, in general I fell in love with a meat grinder until I unscrewed and looked at the knife ... This is a thin, shiny piece of metal , I think it will be blunt only this way, and the notches will also go, but where to look for a replacement? In general, I had to return ... I ordered Axion with a reverse, and without bells and whistles. I think that everything will be in order with the knife there and spare parts (grilles, knives, there will be no problems) And with the saved money, I will buy gratings and a stainless steel knife.
Here.
Maybe someone will use my ordeals

The fact of the matter is that it turns out that Axions' knives can be dull and this unit will crush the minced meat, and not fully grind. I understand that the principle "lucky - not lucky" works in this regard!

Axions' knives can be blunt

None of the Axion owners here have complained yet.

[mechanic]

mechanic, some kind of testing is one-sided, for some reason they showed minced meat close-up at expensive meat grinders, but at Axion and Kenwood they did not show, why would it be?
I don’t know about Kenwood, but I often came across reviews that are not very "meat grinder".
And with Axion, everything is clear, why should they promote inexpensive products? It is more profitable for them to sell Phillips for 20 pieces

I bought Axion according to the reviews of our members of the forum from this Temka, my minced meat is no different from what was shown in close-up on those photos. Only the chicken frightened me at first, did not grind me, and then I thought of changing it to a large grate, so I began to grind like from a machine gun.

Knives from manual meat grinders are suitable for Axion. You need to buy only the sickle and this is not a problem, they are everywhere. And who chews, it may be from a weak tightening, the knife does not fit well. My Axion doesn't chew or spit.

[Elena Bo]

Elena Bo, Axion already has a sickle

Mine, too, does not chew or spit, it chops perfectly!
Review of some kind of left. There are so many owners and such reviews that there was no chewing. I believe more forum users.

Elena Bo, Axion is already sickle-shaped

I know. They just sell different knives for manual meat grinders. If you buy a regular one, then it will do, but the result will be worse and it will dull much faster. Well, this is if you suddenly need to update sometime.
The review is generally strange. Meat grinders for 20,000, 11500, 8500 and 4000 Axion. I noticed that the dear ones had a lot of meat on the screw. And they didn't show at Axion. And why? Because he is almost not there. But on what they ground the minced meat is not clear. For me, Panasonic ground it like that, if the meat was not frozen. And at the same time he spat all around. What to take with Eldorado. I don't trust him at all.

Thank you very much for your answers. It was very important for me to hear the opinion of the owners of these units, from the point of view, bought-turned-on-ground and I am happy! By the way, Axions 41 series, in the maximum configuration, are sold only in Eldorado, this is according to the manufacturer's statement, so why deliberately "omit" the goods you are selling? The time is now such that people began to count their money very well and once again the wallet is missing, so the meat grinder for 20 thousand rubles.Not many will buy, but axion is an affordable and most importantly decent option.

Why only in El Dorado? And in Technosila, and in the CSN, and in local networks, I met a complete set.

Why only in El Dorado? And in Technosila, and in the CSN, and in local networks, I met a complete set.

here's a link: 🔗

[mechanic]

mechanicPerhaps you are right, I have not seen the most complete set, only with shredders.

Hello. I also have a problem with choosing an electric meat grinder. I went now to the website of the manufacturer Axion, and there are two of the best - 41.02 (and the novelty is written) and 41.12. I cannot understand what the differences are between them. The price of the first is higher, yes.
I haven't found anything else yet.

[RedmondM70]

Very interesting video.

Added Sunday 05 Feb 2017 08:00

I cannot understand what the differences are between them.

RedmondM70, go here and see the differences

🔗

Natalia K., thank you. And I myself did not find a comparison in Eldorado, I thought it was not there.
I followed the link and read it. So 41.02 is better.

I will also tell you about my meat grinders, read and watched a video about meat grinders (somehow everything is not so shown), I took out my brand new axion 41.2, washed it and decided to skip the meat, just two pieces (about 3.5 kg) of veal with veins were thawed, I wanted to put Gasha's recipe in the headquarters for the night. then the husband came, a little later the son looked into the kitchen and started testing the unit. the grilles, like those of other meat grinders, were washed easily and quickly with hot water and fairies, I remember the new grilles from Panasonic 1800, especially from the fine ones I was tortured to wash out the grease with a brush. skipped the meat, then tested the vegetable cutter and the citrus juicer. All liked it. works not very noisy, missed the meat perfectly, tried all the grates. I bought an axion at the suggestion of Mila1, many thanks to her for the advice, Lyudmila prepared so much tea with the help of the axion and is very happy with the meat grinder. my Panasonic 1800 does not skip leaves for tea, crumples and chews, but all to no avail. I prepared some tea by passing the leaves in a manual meat grinder. I tried to skip it in a meat grinder from km Kenwood, I felt sorry for the car, I didn't buy it for that. I also liked the fact that in the case of an accidental stopper, the protective cap breaks off, and the mechanism remains intact. these caps cost about 13-15 rubles. Moreover, the purchase of the axion cost me - I bought about 3450 rubles for my daughter-in-law, and 2750 rubles came out for myself. I'm waiting for summer now, I'll make tea.

[Tatyana]

Tatyana, you say everything correctly .... !!!

I'm with a report! The machine is a beast, it thrashed everything playfully, without straining. And veins - films, and pieces of frozen. Sings loudly, but bearable. I'm glad! True, now you need to figure out where to put it for work. The previous one was much lower, but with this assembled I am too tall on my tabletop. You will need to settle down on the dining table, come up with something with an outlet.

Now I wonder why the Japanese use the smallest lattice? for which such dishes? There the hole is less than 2mm. This grate is the hardest to rinse because of the grease, and then, when for the final cleaning of the grease I passed any mixture, I had to pick all the holes with a toothpick, and there are a lot of them there. It’s good that I don’t need such a trifle in my life yet, otherwise you will butt with this lattice.

Please tell me what is the name of your meat grinder?

Added Monday 06 Feb 2017 01:07 AM

I'm with a report! The machine is a beast, it thrashed everything playfully, without straining. And veins - films, and pieces of frozen. Sings loudly, but bearable. I'm glad! True, now you need to figure out where to put it for work. The previous one was much lower, but with this assembled I am too tall on my tabletop. You will need to settle down on the dining table, come up with something with an outlet.

Now I wonder why the Japanese use the smallest lattice? for which such dishes? There the hole is less than 2mm.This grate is the hardest to rinse because of the grease, and then, when for the final cleaning of the grease I passed any mixture, I had to pick all the holes with a toothpick, and there are a lot of them there. It’s good that I don’t need such a trifle in my life yet, otherwise you will butt with this lattice.

Please tell me what is the name of your meat grinder?

[vaselisa]

vaselisa, Lga talked about buying Panasonic-1800.

[RedmondM70]

RedmondM70,
I understand that the only difference is that in 41.2 there is a citrus juicer and there is no kebbe, and in 41.12, on the contrary, there is a kebbe, and there is no citrus. The question is, is this citrus juicer needed? And I still do not understand if 41.12 has splash protection.
I'm in thought ...

Mashustik, I got the answer today: ".. The difference between meat grinders is that 41.12 does not have a splash shield and a citrus juicer attachment.

Respectfully yours and your business,
specialist in advertising and exhibition activities
Tokareva Anastasia
LLC Concern "Axion"
Marketing and Advertising Department ".

Added Monday, 06 Feb 2017 1:29 PM

And what is a kebbe. The specialist did not write anything about the kebbe, probably there is a kebbe in both.

".. The difference between meat grinders is that 41.12 does not have a splash shield and a citrus juicer attachment.

Then it's really better to take 41.2.
Kebbe is such a small plastic nozzle, in 41.2 it is not, but it is possible that it will never be needed. For me, option 41.12 would be preferable if there was splash protection. I don’t like to buy missing parts for new units! I was just offended by Axion, because the protective screen is their "feature", a nice bonus, and I thought it was an integral part of the complete set, it's a shame ...

And what is this kebbe used for?
I wrote to Axion again about the kebbe.

in the complete set Axion 41.2 there is a nozzle for kebbe and for sausages 2 pcs of different diameters. and the splash screen is generally lovely.

I received an answer from Axion - ".. both meat grinders are equipped with attachments for" Kebbe "."

I have a 41.01 meat grinder in the kit there are 3 grates, a knife, a citrus attachment, a removable casing, nozzles for sausages and kebbe - I tried to take the minimum, I bought it cheap :) I like

Girls, I, too, for two months can not decide on the choice of a meat grinder. I don't know which one is better to buy. Axioms 3101 or 4102. I reviewed many manufacturers and decided to stick with Axioms, but I don't know which of the two to choose.

Girls, I bought Axion 41 02 last week. It does a great job, I'm a little noisy, but the overall impressions are very good. Thanks to Masha Masinen for the recommendations.
Here are the pictures

The back, where the cord and attachments are hidden.

I haven’t had time to try the juicer and cutting machine yet, but I think it will be great, the reverse is good, the sausage attachments have also been tested. Value for money

Jouravl, please tell me the price. Did you buy at a discount or in full?

[RedmondM70]

RedmondM70, I bought in ozone, where I used points from MTS, points from Ozone and thanks from Sberbank, I got minus 900 rubles, the price is about 3,400 plus free delivery outside the city.

Jouravl, thanks And thanks for the photo. In general, how many bells and whistles are included in the kit, in total?

Jouravl, thanks And thanks for the photo. In general, how many bells and whistles are included in the kit, in total?

Oh, I didn't count. Lot!
Meat grinder, vegetable cutter attachment with 4 removable drums, one for pancakes, citrus juicer attachment, 3 screw attachments for juicer attachment, 2 sausage attachment, for kebbe, three grates, protective cover against splashes.

I have a 41.01 meat grinder in the kit there are 3 grates, a knife, a citrus attachment, a removable casing, nozzles for sausages and kebbe - I tried to take the minimum, I bought it cheap :) I like

Tell me, does the meat grind well? Did you use a juicer? Does the juice squeeze well?

I bought in ozone, where I used points from MTS

And how you can use these balls, I did not find something on the Ozone website.

And how you can use these balls, I did not find something on the Ozone website.

If you have a phone or your loved ones, you pay for the phone on time, you accumulate points, you can check this in your MTS personal account, enter your number and click on the button send the password via SMS. A password is sent to your phone and you enter your account. You see the amount of accumulated points, somewhere in the middle of the page there is a section
spend points, go in and look for offers from partners, among them ozone, there is also Eldorado, Philips ... click on ozone, and click on the button to get points. You receive a number code on your phone.
You enter this code on the ozone website when you start placing an order, in the left corner, at the very beginning it says - enter the promo code.
You get 300 rubles for a purchase from 3000 rubles.
Good luck!

[Jouravl]

Jouravl, thank you very much. I accumulated a bunch of points at MTS and did not know where to put them. Now I’ll take a walk, I need to make a little list, which I still lack for complete happiness.

Girls who have a meat grinder Axion m 4101? Share how she is to you?

[Olka D]

Olka D, I am for Axion :) Tell me, what is the name of your Axion?

meat grinder Axion m 4101? Share how she is to you?

perfectly! I like it very much: D grinds well and quickly, the instructions say to grind the meat not frozen, I thought it would wind up the veins and clog up in the end - but no, it grinds everything very well without clogging

perfectly! I like it very much: D grinds well and quickly, the instructions say to grind the meat not frozen, I thought it would wind up the veins and clog up in the end - but no, I grind everything very well without hammering Thank you very much for answering me, otherwise I already broke my whole head, which one select. Have you used a juicer?

[Natalia K.]

Natalia K., thank you all for your help, for me it was the best choice, but I bought it for my mother for the new year, while I try it myself, I cook the sausages, I have had guts for sausages for 2 weeks. I wanted a separate mold for myself, but a meat grinder with attachments turned up. so I'll check at the same time

Tell me, where do you buy sausage casings?

Tell me, where do you buy sausage casings?

They talk about it here Natural casing for sausages and artificial casing (SP, RF)

[Miranda]

They talk about it here Natural casing for sausages and artificial casing (SP, RF)Thank you very much for the reference, have you already bought there? and how do you?

Added Wednesday 15 Feb 2017 4:01 PM

Girls, boys! I tried the Axion 41.02 meat grinder today. (I bought it on the recommendation Miranda,) very happy. Can't find additional grilles. You have them where they lay. I have one grate on the auger, I can't see the other two. Is there no place to store these grates on the grinder itself? Maybe I won't need them. Today I was spinning a pumpkin, everything is very fast. Please tell me, how do you like your meat grinder?

Can't find additional grilles. You have them where they lay.

On the back panel there is a small window, it rises, there are two bars.