Pasta machine Philips HR2355 / 09

And here I am, surprisingly, while holding on and do not even want a spiral. Maybe she got sick?

On the contrary, I always wanted a spiral, but Philips did not have the original ones. Or maybe they have already appeared, but I did not know?
But the Vietnamese fellow, he hurried in advance. And the girls showed such beauty, and I ordered, especially directly without intermediaries, conveniently.

[caprice23]

ordered exactly at 4?

caprice23, Natasha, exactly. You can see a picture in the order - it is 4.

tried to do? Maybe you don't need to change?

Not yet. I've only tried spaghetti so far.))
In general, I will not be like everyone else. At 5 no one ordered or told.))

[Ludmila]

Ludmila, and ordered exactly 4? In general, as far as I understand, when paying through a paypal, there is some kind of guarantee and you can open something similar to a dispute on Ali. But I will not say for sure, can any of the girls tell me.


Have you tried to do it? Maybe you don't need to change? Are they pretty good?

Yes, that's right. There, protection for 30 or 60 days through paper and ibey gives protection for some time. I would call the paper dial. But first I would write a prod. If he sent the wrong attachment, which was bought, then it is his fault.



Or immediately open a dispute on ibey. Photos of the nozzle only need to be taken and attached

I examined the nozzle with shells, but it is not the same! Not 4 grooved, but 5 smooth ... Well, where my eyes were, I got it in June. And what can be done?

Natasha correctly said, first check your order, maybe you threw the wrong one into the basket then. If there were 4 purchases, and he sent 5 smooth ones, take a photo of the attachment and a screen of the order and talk to the product, no, so contact the support service.

Papardelli and Tagliatelli. Svetlana777, Light, do you have any pictures?

no, no, I just tried to make it - thick, removed it from my eyes. I don't want flat ones yet, I think any thickness can be bungled on a dough sheeter / noodle cutter, that's why I don't consider flat ones. (and I don’t need to incite me on them

any thickness can be welded on a dough sheeter / noodle cutter,

Oh, while you knead the dough, while you roll it out, while you cut it

and it is not necessary to incite me on them

Choi that? Kaneshna nada! It's not interesting to want one))

You can see a picture in the order - it is 4.

I am writing a product, send a photo, if you shout at him, you see, he will send a replacement (he will refuse, say that all the tips that are bought from him are ordered from the forum where you are, and if no one else will buy from him, in general you will find what he say, well, let him send him to half the price (two others ...

Oh, while you knead the dough, while you roll it out, while you cut it

And who says this? .. And what did this someone say less than a month ago? ..

Or immediately open a dispute on ibey. Photos of the nozzle only need to be taken and attached

Sveta, where is the dispute open?
I wrote to the seller so far, indicated the reason that the product received does not match the description, and, of course, I attached a photo.

will refuse to say - that all the nozzles that are bought from him are ordered from the forum where you are, and if no one else will buy from him

Oh, while you knead the dough, while you roll it out, while you cut it

Tyuyuyu, the dough is 21 seconds, zip, (or the remains from the freezer that remain from the elephant, zip) and then the thing is, if a machine with a motor, just have time to sculpt.I bought it at the Stars, so no, I don’t want flat nozzles, tomorrow I’ll go pick it up with a built-in motor and .... goodbye flat nozzles

And who says this? .. And what did this someone say less than a month ago? ..

Whoa?
Well, that's me)))
In fact, I really like macaros from the dough sheeter. You can make them exactly the way you want. And even slender ones leave, as if from a store. Do not frizz around the edges)

Sveta, where is the dispute open?

but fig knows it, I didn’t come across this, I didn’t really find it, I looked at Raural (opened it, clicked on the payment, well, there it goes ...

copy Need to contact the seller?
Log in to eBay with your username and navigate to your purchase history. For help, go to the eBay Resolution Center.
I pressed it, went to the Center on eVau, and then I didn’t do anything. Try this way.

[Ludmila]

Sveta, where is the dispute open?
I wrote to the seller so far, indicated the reason that the product received does not match the description, and, of course, I attached a photo.

Ludmila, go to the history of purchases (orders), find this attachment, there will be a drop-down menu with options, and there should be something like "open a dispute" or "resolve a problem". I explain it so vaguely because I work in the English version of ibey, but how is it in the Russian ...

I do not have access to ibey right now, unfortunately. Girls, please help me with advice on opening a dispute on ibey.

If a sell error occurs, then Ibei will most likely return the purchase amount.

And even slender ones leave, as if from a store. Do not frizz around the edges

and what thickness you want

Terry edges do not bother me a bit!
I agree, from the rolling out exactly, pretty. But for me it is sooo dreary: get the box with rolling out, take it out, fix it, twist it. And that's not counting the test. I have a simple rollout, without a motor, although, at one time, there were thoughts of its upgrade.

I love my dough rolling machine, and I don't need elephants in my house, although I read the topic constantly and that's it.

find this attachment, there will be a drop-down menu with options, and there should be something like "open a dispute" or "resolve the problem"

I didn’t find one, only contact the seller, but if through Raupal, then you can reach eBau where the info is where you can mark what you need ..

Conflict Resolution Center
Resolve the question
We always advise our members to enter into negotiations to resolve difficulties associated with a transaction. First, contact the participant through the Conflict Resolution Center to try to resolve the issue.
To start resolving the issue, please let us know what your problem is:
I bought a product. I sold the product.
I haven't received my item yet.
I haven't received payment yet.
I received an item that does not match the seller's description.
I agreed with the buyer to cancel the transaction.

I love my dough roller, and I don't need elephants in my house

for the time being ... I also said so)))

I don't need elephants in my house

no, well, the elephant is the necessary device, the dough rolling will definitely not replace it, but what about the spirals are beautiful, and the macaroons are square, and the spaghetti

go to the history of purchases (orders), find this attachment, there will be a drop-down menu with options, and there should be something like "open a dispute" or "resolve a problem".

In the order, only the link "Contact the seller", in it - several reasons for contacting, I chose "I received the product, but it does not match its description", using this form and sent a letter.
I'll tell you later how it all ends.

[Ludmila]

Ludmila, try again through Raupal, as I wrote above, when you follow the links from there to Eva under the spoiler, what should come out Pasta machine Philips HR2355 / 09 # 5665 you choose the penultimate one and (the devil pulled me to do it) there will come out below on a blue background CONTACT us and the girl (I think maybe online chat ??) did not press.
We must knock on all doors, and curse culturally, otherwise

[Svetlana777]

Svetlana777, Svetlana, thanks, and so I'll try.))
I went to paypal, then to ibey. It looks like I'm getting into the same form of contacting the seller.

It looks like I'm getting into the same form of contacting the seller.
.

and below there is perhaps a blue strip where you can contact not with the prod? (look carefully at the bottom of the page)

I love my dough roller, and I don't need elephants in my house

The elephant is nooooo, but the elephant is quite - to play with me, as the most doubting one)))
I still do not understand whether I like it or not, but I have already ordered the nozzles. I'm delighted with the process, but not very much from pasta)
Well, I love that there would be beautiful macaros, each one to one, but here it does not work, well, except for spaghetti. Give me aesthetics))

[Svetlana777]

Svetlana777, yes, that's right, the PP has its own feedback form.
I filled in everything, asked to compensate for half the cost.)) We are waiting, sir.

I filled in everything, asked to compensate for half the cost.)) We are waiting, sir.

well done, we'll wait for the result together. (if the prod answers first, do not forget to hurt the HP, Schaub did not remain without profit at all, he already draws muleins in his head, planes / prints various nozzles, since such a booze / purchase has gone)

The elephant is nooooo, but the elephant is quite - to play with me, as the most doubting one)))

Natasha, I read all your doubts. In my family, they are quite even about pasta, they just support my toys and therefore I play, I understand that we do not need an elephant, but the topic is very interesting to observe. The dough sheeter for me solved a lot of problems (dumplings, dumplings, etc. I ride everything on it, I'm very happy with it, I love it a lot and I'm not going to change it for elephants)

Do not frizz around the edges)

So this is the very class in Italian pasta:
any Italian sauce adheres perfectly to these edges

Good evening everyone
I am with such a question - maybe someone has nozzles for sale.
We have bought, tried and don’t like the shape of the products.
On a large and small elephant.
And then my family asks for new forms.

[Ksenia]

Ksenia, did you leave both elephants for yourself?



And I made myself shells for lunch
This time everything went with a bang!
For 1 glass of Italian flour, the tc took 1 egg and water to the mark. No more water was added. At first, some horror films came up, barely, crumbling oblique curves. Okay, at least I didn’t act willful again and add water. I waited a bit and went to the beautiful shells. The first krakozyabry shoved back into the elephant.
Well, here it is:

I am very happy! The dough is thin)
I concluded that for curly macaros you need a drier dough, and for spaghetti, a wetter dough will do)

P.S. I sit and think, can I order the spirals?
Or are the nozzles enough for me?

I made myself shells for lunch

Excellent turned out

P.S. I sit and think, can I order the spirals?

Similarly, only about shells)

For 1 glass of Italian flour mc

Natasha, did I understand correctly what you were doing on Makfa?

I sit and think, can I order the spirals?

Why think, take it, of course.

let's go beautiful seashells

Natasha, what kind of nozzle is this?

[Tatyana]

what kind of nozzle?

Tatyana, shells of 2 types there, these ribbed like this, but so far it is not available. We are waiting for the new ones to be printed ...
🔗

Did I understand correctly what you were doing on Macfa?

I was directly puzzled by the question, in the same place it seems like it says 1 tbsp of Italian flour (you are a hard grade) il Makfa began to produce something else, but I don't know?

For 1 glass of Italian flour, the tc took 1 egg and water to the mark. No more water was added. At first, some horror films came up, barely, crumbling oblique curves. Okay, at least I didn’t act willful again and add water.

golden words, and yesterday I "did" the spirals, I decided without an egg, and ... and, in short, I volunteered, I did splash too much water, that is.To the dough, terribly creaking, I tried to portray something when I left, I decided that it was hard for the elephant ... Next time I will definitely do it according to the recipe! The dough on one water is completely different, very interesting, the spirals had to be made short, because they began to unwind and acquire an unknown new shape.

[made on the water]

Screwed fettuccine, no eggs, made on the water.
Flour half TK, the rest is 1 grade, amaranth, rice flour, a pack of pectin.
I put the pectin like a bee instead of an egg, sort of like a binder, well, in general, I put the pectin just like that)) useful. In the finished form of that pectin, I did not notice
Cooked for about 15 minutes, without an egg, it is softer both before and after cooking, but when it was kneaded, very small crumbs were spinning.
Delicious. All my tails with butter, my mother's macaroni respects, without butter, only the older cat takes a bite, but only so that egg-egg

[Irsha]

Irsha, Ir, and what about the service, did your daughter address it more specifically?

[Marina]

Dough on one water is completely different

softer and not yellowish.
But still elastic.

But it is really better to throw the first crawlers back into the bunker, they are dryish and shaggy, their progression is not even.




Marina, marinastom, have not yet been contacted. They seem to have it rainy there, and the son-in-law will go through the whole city. In general, he is inclined not to hit the slippers, but to follow your path, and I say - the service is better, and my daughter says - and without a pin it is normal.

I contacted the hotline at Philips, I will remind me 300 km to the service center, Phillips, politely offered to help me arrange the purchase of a new bunker)))) noticing that the delivery is paid))))
Since Sunday, after a breakdown, I have not used the machine, there is simply no time
The husband, having examined the broken parts well, said that nothing was broken, just badly welded and glued

purchase of a new bunker)))) noticing that delivery is paid

is the bunker itself free?

me, too, if anything, mmm, 300 km to Yekaterinburg service

Irina, I wrote - purchase, wrote the price 3200 or 3400

purchase

yeah ...
tady, ttt, self-tapping screws

3200 bunker, then transfer 200 r

The husband, having examined the broken parts well, said that nothing was broken, just badly welded and glued

named. The rivet plug flew off from the outside.
Actually, and it's true, I think that self-tapping screws, if anything,

, did I understand correctly what you were doing on Macfa?

No, Natasha, exactly in Italian. I ordered it on ozone for a long time. She stood in the locker quietly, I completely forgot about her. So I remembered and did. I did not find any difference with the macfa)

il Makfa began to release something else, but I don't know?

Not until it became)))

Natasha, what kind of attachment is this?

Tatyana, Lanna correctly gave the link above. Shells for 4 pieces



Girls, can you make pasta by adding American dye?

[Ksenia]

Ksenia, did you leave both elephants for yourself?




Bye both



Well, I don't know how to answer with quotes

exactly in Italian.

I did not find any difference with the macfa)

Thank you, so I will continue to use MacPha.

Yesterday I tried out my last attachment from the set. Cool tubes were coming out! Moreover, different-sized crooks are such, because I cut them off by eye.
I sprinkled a little ordinary flour into the cup, a little hard, a little more corn. Everything worked out right away.
Very tasty, so yellow. But they cooked again for a long time.
And why did I, a bastard, take this flour on the scales for the first time ?!

Girls! I want to ask the owners of the big elephant. The set of nozzles 2490/10 has a plastic spatula knife, like, as said, for cutting pasta. Have you tried it in work and does it differ in cutting quality from the usual spatula that comes in the set for the paste machine?

[Elena]

Elena, if we are talking about the one in my photo, then it is very convenient, it is for curly pasta, I cut spaghetti with an ordinary spatula.
Pasta machine Philips HR2355 / 09 # 5055

[Cvetaal]

Cvetaal, Sveta! Yes, it is about him and speech. You made me very happy. I sold my set for a large elephant without this knife (of course, by agreement with the buyer, who has a lot of different knives). Now I have such a knife, I just forgot about it and haven't tried it yet. It means that I left it for a reason.
Thank you!

Helen

[Cvetaal]

Cvetaal, writes that the video is not available.