Pasta machine Philips HR2355 / 09

[Svetlana777]

Svetlana777, Sveta! So you completely repeated my words.
For example, tomorrow I will definitely call the store. Let the rest as they want.

I went and looked how much the chamber for kneading the dough with pin 3200 costs

For example, tomorrow I will definitely call the store.

You will do the right thing, let them not relax, otherwise, seeing the demand, they cooked up anyhow, there should be control, and don't shame the fig brand!

Friends, how is this plug scientifically called, so that you can address the representatives immediately and specifically on the case?

[Rituslya]

Rituslya, Rita! Most likely, it is better to send a picture to the Philips store for demonstration. I believe that since your two cars from the last batch broke down, then you have the right (if you wish) to return them to the store. Another thing is that they will not exchange you for a new one. They will refer to the fact that they are not in the store. But the money must be returned.
It's a mess so that two of them have the same breakdown after such a period.

Girls, and who has a big elephant, is there such a pin too? And what is it made of?

I couldn't find any pin in mine. There’s just some kind of garbage on the left, but it’s next to the nozzle, not in the mixing chamber.

[Svetlana]

Svetlana, can you have a photo of the bunker from the inside?

Another thing is that they will not exchange you for a new one. They will refer to the fact that they are not in the store.

and there is no need to exchange / hand over, we must insist that they send a new camera !!!! Please attach photos with broken pins.

[Natasha]

Natasha, I can take a picture, but there is nothing there

can I have a photo of the bunker inside?

their bunker is empty, and the entot pin is attached directly to the shaft.

the shaft is a single whole, now I will show a photo

[Ritulya]

But what is this plug scientifically called, so that you can address the representatives immediately and specifically on the case?

Ritulya, just say so that a plastic pin has fallen off inside the camera. He (the pin) is one in the camera, so it is impossible to make a mistake. Insist on having a complete camera change.

There is nothing inside the bunker in the big elephant, no pins.
And, in fact, young ladies, that you are rushing ahead of the locomotive? Problems are resolved as they become available. Did something fall off? Split? No? Well, that's all. There will be a problem (pah-pah) - you will understand. One case is not statistics.

[Marina]

Girls, my daughter started Filipka for the first time yesterday, and a pin inside the chamber fell out during kneading. Filipok just bought, from the last promotional batch on the Philps website.
But! - the daughter said that little crumbs were formed, the pressure of the dough lump crushed the pin, it fell out of the hole, the external plug fell off. This plug can be snapped back into the pin, but it pops out again during operation.
The daughter took out this pin completely, prospaghetted to the end, "the detachment did not notice the loss of the soldier."
I think that it was not for nothing that this game was discounted, apparently it was in it that there were such precedents.
The problem, in my opinion, is not big, as for me, so reliable enough solution at Marina - sent a photo of her daughter, let her son-in-law try.
This pin helps keep the dough out of the front wall of the hopper and guides it onto the auger. The part you need.
In a large elephant, this "pin" is cast on a common shaft - in front of the auger - 🔗 and in a small elephant they solved it insert into the mixing chamber, the solution, as it turned out, is unreliable, the chamber is also plastic.
Of course, you need to call the site. We will know how the site will solve such problems.
And to buy a replacement mixing chamber with a whole pin is an expensive pleasure = 3200 rubles more than half of our promotional Filipka)) the meaning of the action disappears.
Interestingly, a mixing chamber for a large elephant is 2 times cheaper than for a small one 🔗 Apparently, it was assumed that there was an unreliable part in it ...

One case is not statistics.

eh ... not just one ...
True, they happen due to the carelessness of the hostesses, due to non-compliance with the technology of the pasta dough
Still, this mini-version of the pasta machine is not as reliable as a large elephant, in which all the parts are solid and metal.
The reliability of our filipki is in our hands, in our careful observance of the correct kneading of the dough.

But! - the daughter said that little crumbs were formed, the pressure of the dough lump crushed the pin, it fell out of the hole, the external plug fell off.

That's what I wrote about, although they objected to me

And those who have had these machines for a long time, that, who has never had a wet dough? No, I think that's not the point. The machine should certainly not break because the consistency of the dough is not quite the same.

[marinastom]

They repaired me like that.

marinastom, Marina, Tell me, what kind of self-tapping screws or what they are called, did you use?
Please tell us more about the process of fastening the parts.

And those who have had these machines for a long time, have no one ever had a wet dough? No, I think that's not the point. The machine should certainly not break because the consistency of the dough is not quite the same. The dough is not made of iron!

Lena, I have little experience of independent work with filipk. But I carefully read the topic, delved into and mastered the nuances.
Thanks to our generous advice and warnings to girls

I had a couple of times that the dough was wet and began to clump, I at once stopped the machine, the first time just took out the unsuccessful dough and loaded everything over again, added flour the second time, the machine coped with it, stirred everything to the crumb.
And once again it was, corrected on the go

first a very dry and crumbly dough spun, splashed 2 tables. l of water - stuck, poured a couple of tables. l. flour 1 s, the crumb spun again, mmm - let's go spaghetti, hard, very warm, but elastic.

The pasta making process is fast, there is no difficulty in following it, and it’s funny to watch

[Irsha]

Irsha, Irish, because I didn’t do it myself, I can’t say what kind of screws. If necessary, I will clarify.
My Master said that he glued and supplemented with self-tapping screws.

If necessary, I will clarify

Marin. please clarify. Doing something, too, will not be the daughter herself)) and the central control will not interfere.

Already sent a request.
Ir, you can drop the phone in a personal, write to Viber or Votsap, if any.

DeUshki share the sizes here, please. What if it comes in handy

Ir, you can drop the phone in a personal, I will write to Viber or Votsap, if any

And we can also give details, suddenly someone will come in handy. TTT.

Most likely the dough was too important.
According to the instructions, there should be a crumb.

I agree with that. I once got a wetter dough, crumb, but lumpy like that. And this crumb got into lumps that got stuck on this pin and, I think, pressed on it.
And if in the batch of the last elephants this pin was not very securely fixed, then it is quite possible that such a dough gives it an extra load and it may break off.

My Master said he glued

What kind of glue did you use, can you also clarify?

and it can break off.

here it did not break off from the daughter, but the external plug fell out, and the pin could simply be removed. Take out inside.
The daughter was finishing just with the pin removed, with a hole in the right side))

Quote: caprice23 from Today at 10:21 AM
and it can break off.
here it did not break off from the daughter, but the external plug fell out, and the pin could simply be removed.

Broken off, fell out ... Better of course if it did fall out
But obviously this came from some kind of impact on this pin, the effect there is one - the dough. Well, plus a flimsy pin mount

Oh, virgins ... The phone is so dreary ...

It seems to be 2.2 mm screws
Drilled 1.7 mm in the blade
In the part outside the hole 2.2 mm
And I also drilled in it with a 3.5 mm drill to a depth of 2-3 mm so that the caps would hide
And before collecting everything I anointed with T-7000 glue

Oh, here's a clarification: Probably not 2-3, smaller for the cap, 1-1.5 ...

Although you are here trying to criticize my words, but if any of you thinks that you need to somehow adapt to the little elephant from this batch, that the falling out and breaking of machine parts is the result of improper work of the owner of the car, then God be with you. Do not call anywhere, do not write, etc., Nobody forces you. Follow the words that it is not necessary to raise the boil ahead of time. And rightly so! Let them continue to fool us!
Here everyone decides for himself how to act.
Success to everyone!

[Elena]

Elena, do not be offended Of course, you must call and write !!! Obviously this is a marriage! He just showed up under the influence of a wetter dough



I am writing

Well, plus a flimsy pin mount

but this clearly should not be

To be honest, I also think this is a marriage. So it was necessary to fix this pin more reliably. Marinochka found a way.
No one is immune from mistakes, so such a nuisance can happen to any user.
I will definitely call too, but I need to find the stub. As always, I started running out of despair, but I don't know where.

[Rituslya]

Rituslya, Ritochka, try to find it and let your cup be changed.

I also think that this is a matter of marriage ...
Okay, from a lump of dough in six months, but not in the first batch ...
I started the dough according to the instructions for this unit ....
If you look at the thickness of the plastic at the points of contact between the plug and the pin, then you understand that it will not withstand a heavy load.

[aniramka]

aniramka, Marina, have you already called Philips?

No, a lot of work today and tomorrow, and I wanted to take a photo of this piece if I write a letter to them, but my hands have not yet reached.

Do not call anywhere, do not write, etc., Nobody forces

Len, don't be angry.
I didn't criticize you. And also surprised at such a quick breakdown.
But there really was an inattention to the work of the machine. Even if you pour flour exactly according to the recipe, but how many times it has been said here that flour is different, you need look in fact the batch, and can be adjusted, thank God.

And you need to call the site, try to rectify the situation.
Have you already made your own filipok?

Guys, maybe this pin works like a fuse? That is, if it fell off, then you need to put it in place and make the dough more crumbly, crumbly. Otherwise, the motor may overload from overload. These are my assumptions, thoughts aloud.
You still need to call Phillips and find out why the pin falls off.

That is, if it fell off, then you need to put it in place

his daughter tried to insert it, but it clicked off again.
I called the hotline - there are no free operators)) probably phillips stoves are repaired.
I looked at the service centers, in Yekaterinburg there are, most likely, that is where they will be sent. The guarantee has begun.

service centers, in Yekaterinburg there are

called, tovarisch asked what kind of unit, what detail - dictated from 🔗 , although the man asked for a picture)) nothing and opened it with words.
He said, since there is a guarantee, then of course, bring it, we will take a look.

Ospidya, girls, write and call wherever you want, who will forbid you!)) Of course, no one. The question is, what will you say and what will you claim if everything in your car is intact and nothing has fallen off. Will you tell them about marriage? Which one? Where? Why did you decide that? Because some Dusya in Kaliningrad has something broken? You can always talk and ask, of course. But I probably think like a lawyer, education and work affects.No "evidence" - no basis for manufacturer's actions. The one who really broke down is to make a claim. There is a guarantee, there is an RFP.
If you are now in the car, you will glue / fasten this pin yourself in advance, etc. - there will be problems with your guarantee.

In general, I am kind, not harmful and do not want to offend anyone)). I just urged you not to fuss, think.)))

If you are now in the car, you will glue / fasten this pin yourself in advance, etc. - there will be problems with your guarantee.

Natasha, no one wants in advance. It's just that three have already fallen off. They want to call Philips. And the rest just ask, just in case, what to do (glue, screw), if suddenly ... I hope This "if suddenly" does not happen

It's just that three have already fallen off.

Then I probably missed something in the dialogue, I apologize. Marina does not count, she forgot the paddle in the bunker, there anything could break down, including the engine. This is not the case at all. Daughter Irsha. And who else?

[aniramka]

Have aniramka, at Ritusli's and at Irsha's

at Irsha

Irsha did not fall off as far as I understood. Her daughter fell off.

Irsha did not fall off as far as I understood. Her daughter fell off

I wrote it in a shorter way

Irsha did not fall off as far as I understood. Her daughter fell off.

Irishka, hear, rejoice! ..
Natasha, I'm sorry, it's just, really, a funny pun ...

Irishka, hear, rejoice!

oh, I can’t))) glory to those, Lord, even though here he didn’t fall off Irsha))) mmm




I will write about my daughter's troubles for repairing a filipka.

[Selling my elephant.]

Girls, if anyone needs- Selling my elephant.
Boo twice... Spaghetti once, foam once.
It's just not my device. I understand that it will stand.

Received a spiral attachment, cooked with tomato powder, TK flour, 1 egg + water. In general, the spirals spun well, but there are also quite even specimens. The boiled form was preserved.

[Svetlana]

Svetlana, and how about the thickness of the dough? * Hopefully * thinner than the basic set of horns?



Girls, can you try Parfait or Pudov with food coloring? Which are for the pastry chef. I want something quick while at the dacha. Ozone brings us * praise him *, this year I chase them in the tail and mane))

[Svetlana]

Svetlanathinner than horns. On the nozzle itself, the slots are noticeably thinner.

with food coloring Parfait

I do not recommend Parfait, there was a negative experience, now I bypass them. Somehow, these dyes spoiled a large batch of macarons for me, they were very bitter.

If you want colored, then the best is vegetable juices, I showed the multi-colored above.




By the way, I bought tomato powder at Ozone.
🔗

The price was lifted

[Svetlana]

Svetlana, congratulations, wonderful spirals turned out

By the way, I bought tomato powder at Ozone.
🔗

The price was lifted

the conclusion suggests itself - dry and do it yourself!
and today I waited all day for mine to arrive at the post office, in the morning we went, so it was almost to closing and arrived, I feel the way was far, apparently we were driving through the neighboring city, tomorrow morning I’ll scratch to pick it up (I’ll have to make an assorted flour from one batch of flour, 3 kind of experience

[Cvetaal]

Cvetaal, Sveta, pretty macaros turned out. I love spirals and shells very much.
Mine are on the way. I'll try it on buckwheat flour.

[Cvetaal]

Cvetaal, Sveta, pretty macaroshki turned out!
Svetlana777, Light, I'm already confused what 3 types will be?



And I took my shells from the post office today. I tried it. I will unsubscribe in detail tomorrow. So far, an ambiguous impression from them

3 types will be

spirals, squares and shells

(I feel I will make assorted flour from one batch of flour, 3 types of testing

I plan to bookmark 1 rate for each nozzle)) I already mentally make them, and they walk from Moscow to me on foot))

And I took my shells from the post office today. I tried it. I will unsubscribe in detail tomorrow. So far, an ambiguous impression from them

Natasha, what didn't you like?