How to choose a cooker hood

[Elena,]

Highlight the message and click

Urrrrrrrrrrrrrrrrrrrrrrrrrrrrr ................ happened!!!
Elena, thanks for the training / educational program !!!

[Lyudochka]

Lyudochka, not at all! We all help each other here

Good day! Girls, tell me please, who has the gas top, at what height did you hang your hoods from the hob? Inclined hoods are of particular interest. At what height it is recommended to hang, I know. But I really want to hang it lower, so that it is in line with the upper drawers. And whoever has a hood hanging low enough from a gas varachnaya, isn't it scary that something will blaze. How long has it been hanging so low? They tell me that it will not immediately burst into flames, but when, over time, trochies of byaka are collected on the fat filter, then this byaka can easily blaze. I want an inclined hood, it is prettier to me and I think it is just that and you can hang it a little lower.
Oh, the whole poem dashed off, litter.
Py. sy. I also want to hang the top boxes as low as possible, I'm only 162 cm tall and really don't want to have shelves in the kitchen that I can't reach ..

Good day! Help to choose a hood for the kitchen. Kitchen 11 m2, I imagine the hood like this: inclined, black, so that it works quietly. The price up to 12000-13000 would be desirable.

Good day! Help to choose a hood for the kitchen. Kitchen 11 m2, I imagine the hood like this: inclined, black, so that it works quietly. The price up to 12000-13000 would be desirable.

I have an inclined Kronasteel hood: Kronasteel Irida PB 600 black

If cheaper they still have such: Kronasteel SELIYA PB 500 black

Can't leave a link

I really like it: easy to wash, looks nice, powerful.
In general, this manufacturer only deals with hoods, so somehow there is more confidence that it is a reliable thing.

And who has a hood hanging low enough from a gas varachny, is it not scary that something will blaze

There are given the standards under which it is guaranteed that no fire will occur in any case. In order not to complain to the courts later on the manufacturer. In reality, do you have a layer of fat like in a frying pan? And there is a frying pan on the fire, it heats up, how you have to try so that the fat really flares up. And horror stories about fat dripping from the hood, which will catch fire when it falls on the stove :) This also needs to be worked out properly :)
Hang up as conveniently, rinse the grease filter and the outer surface of the hood frequently for peace of mind, and do not be afraid of anything.

Not to say that the topic is very lively, but in my time it would have been relevant to me.
So I am writing my experience of choosing a hood, maybe someone will come in handy.
At first I did not know at all which side to approach the choice.
First, I decided on the appearance and color. Oblique, black.
Then with the parameter m3 / h
Then with the consumed electricity, kW / year
With noise, db
With price, €
Excellent, after spending a certain number of hours on the internet, I found a worthy one.
But, she did not fit in size. Pipe too long.
I had to first look at the appropriate sizes, and only then everything else (
There were not so many suitable (((literally 3 pieces.
I'll make an order today. Average in terms of performance, electricity class b, instead of a, noise 67, instead of 54, with m3 / h in addition, the price is good. But it will fit and you don't need to saw anything)
Install, post a photo.

Then with the parameter m3 / h
Then with power consumption

It's kind of like interconnected parameters, isn't it?)

Wrongly written, with the consumed electricity, kW / year.

Even more incomprehensible ...And this is where it can be in the characteristics ?? If one person cooks porridge, which almost does not require extracts, and the other practices Chinese cuisine, for which 1000 cubic meters of productivity may not be enough?

Here, 82 W / year

Apparently, some average statistical value is taken.

Added Saturday 27 Aug 2016 1:03 PM

I wanted to buy this hood, but the pipe is so long ((((
🔗
I had to choose another
🔗

I had to choose another

14 centimeters difference was so critical for you ?? Is she against the ceiling?
And if you lower it below? Inclined ones hang quite low, their center is approximately at the same height at which the traditional version is hung.

We have 92 cm from the ceiling to the panel on the wall. Even if you cut off the panel, it will turn out very low above the table top.
Well, with all our cars, which are both high and not very, this is critical.
Plus an absolutely stupid window, the first hood will cut off its corner ((
The first hood has a minimum of 1065 cm (we will use filters), the second has 325 + from 460 to 700. That is, just under our 92 cm.

But, she did not fit in size. Pipe too long.
I had to first look at the appropriate sizes, and only then everything else (
There were not so many suitable (((literally 3 pieces.

That the hood may not fit because it has a long pipe, I certainly did not expect it)))

Added on Monday 29 Aug 2016 09:27 PM

By the way, I bought a hood, but it was not without problems either. I ordered it through mvideo, so they brought me the wrong hood. And the driver was proving so much that this was what I needed that I almost believed it.

Itself in shock, chose to choose, but it turns out you need to look at the size first. They do a lot of long ones, can they all have high ceilings? we have 2.42

In Russia, on average, ceilings are 2.6-2.7, more are fewer already exceptions

It looks like our height is an exception)

The promised pictures of the hood

[Lisichkalal]

Lisichkalal, but how does it catch? Does it take everything well?
Even yesterday I took a walk in the store, I was horrified by some of these hoods - they should catch them with a tiny crack. One. Below. As a filter, there is a little thin grate. Turned on to the maximum - the air movement is barely noticeable.
Gloom, in short. Not a hood, but an interior decoration.

I will not say that I am delighted. There is almost nothing from below, but from the side by the window it draws in decently. It seems to me enough, I cook almost everything in typewriters, and the extractor hood for rare occasions when cooking on the stove or in a pressure cooker, when steam is released.
Still quite noisy, but I have nothing to compare with.
Because of the stupid window, our other options did not fit well ((
Where there is a screen in the middle, it pulls into the clicks of the screen. But we don't have it, just glass and will pull it in, as it were.
Vidyuhi I do not know how to insert (
I'll take a photo of the filter, if interested) but I'll post it later, since there are some problems with uploading from the phone and tablet. Everything comes from a computer, but it is far away .., ce la vie
So far we have done only on charcoal filters, the pipe has not been taken out into the street. If we are disappointed, we will withdraw.

A. Well, that's why it pulls very weakly, and makes more noise, that on coal - these cartridges consume at least a third of the power.
Well nothing. At least something .. And then if a brand new kitchenette quickly overgrows with fat - it will be completely offensive.

[Lena]

Lena, I'll see if this power is enough for me or not, if not, then we'll take it out into the yard)))

Something nonsense with the hood. It does not suck in, but blows the air back into the kitchen.
That is, it works like a fan, and not like a vacuum cleaner. And if you bring a sheet of paper, then it will fly away and not stick to the hood.

What is it like?? What place does it pull in? Well, from somewhere she takes air to blow it onto the stove.

I experimented with a napkin. It pulls in, but somehow weakly, but blows out strongly. That's right, as much as he sucked in, he returned as much air. But you bring your hand to the place where it draws in and there is nothing. Even the steam is not very drawn there. And the smells from cooking are present.
Maybe vertical hoods are all like that? Or because of the charcoal filters?
I wrote to the seller, she says return, we will refund the money. But there is no guarantee that another similar one will be better.
Who has a vertical hood that draws in air a lot?

It pulls in, but somehow weakly, but blows out strongly. That's right, as much as he took in, he returned as much air. But you bring your hand to the place where it draws in and there is nothing. Even steam does not go there very much.

Probably, this is because she only needs to catch steam with the bottom part, and she draws in air from all sides. Therefore, it blows out "4 times more" than it draws in. )) But this is true for all inclined people, you understood this from the very beginning. ))

It looks like you will have to take the pipe outside (

[Svetlana]

Svetlana, Light, looked at your hood! effective!
And I, the sod, did not even see such hoods and did not realize that there were such.
And rather, she ran to test her own, very simple one. The napkin is sticky, even at a minimum.

[Vika]

Vika, and your pipe is eaten out or also on charcoal filters? Does it take away smells?
But the sense of its showiness, it pulls something bad ...

[Svetlana]

Svetlana, A pipe is brought out. Yes, it removes odors very well. But we also have some kind of super sophisticated ventilation, so smells are normal.

I wrote to the seller, says return, we will refund the money. But there is no guarantee that another similar one will be better.
Who has a vertical hood that draws in air a lot?

Indeed, nonsense. This is the first time I've heard of this. I have an incline, everything is fine with her.
It's good that the seller is good, went for a refund. And what kind of company do you have?

Added Sunday, October 02, 2016 1:09 PM

Vika, have you got the pipe out, or also on carbon filters? Does it take away smells?
But the sense of its showiness, it pulls something bad ...

When the hood is not removed, but works through charcoal filters, productivity is reduced by 30%. So if it is not possible to withdraw, then you need to take the hood more powerful.

[Anastasia]

🔗
Anastasia, like this.
Yes, it seems more powerful than it should have chosen. The kitchen is 8 square meters, and the hood is 713 cubic meters, that is, as I understand it, 10-12 square meters.
We have not returned while we think (((
Nastya, do you bring your hand down and pull it straight?

[Anastasia]

Anastasia, like this.
Yes, it seems more powerful than it should have chosen. The kitchen is 8 square meters, and the hood is 713 cubic meters, that is, as I understand it, 10-12 square meters.
We have not returned while we think (((
Nastya, do you bring your hand down and pull it straight?

I have not seen this on the Russian market. In general, 713 cubes is a lot.
Mine pulls fine. The hand, of course, does not attract. But with 2 pans copes easily. And at the 3rd speed, steam from the kettle is also drawn into itself, which is on the table. Although I have less power.
Why do you think to take it or not? If it does not cope with the main function, hand it over.

Yes, this is my first hood in my life, I don't know how it should be, but I imagined that it was different.
We have some kind of non-standard ceiling and few hoods fit in size. This one seems to have already been installed, I'm just not sure that another similar one will be better and there is nowhere to look at the work of such hoods (

Yes, this is my first hood in my life, I don't know how it should be, but I imagined that it was different.
We have some kind of non-standard ceiling and few hoods fit in size. This one seems to have already been installed, I'm just not sure that another similar one will be better and there is nowhere to see how such hoods work (

Hello! Very interesting, how are you doing with the hood, what have you decided?

[Anastasia]

Anastasia, yes left
They did not want to bother, but it seems that she pulls, though not in the way she thought. But noisy is a fact. I rarely turn it on and not for long, so it will do.
We were visiting, there the hood is old, so you can't hear it at all, but mine is like a vacuum cleaner.

They did not want to bother, but it seems that she pulls, though not in the way she thought. But noisy is a fact.

We are also noisy.) But pulls.She hangs sideways, in an attempt to somehow grasp both cooking and gas in priority.
People once doubted that this is good, so I went to take a picture. From the picture it seems that the hood is just from the side, but in fact it is also much farther than the hob with a frying pan, that is, there is more than half a meter difference between the frying pan and the hood horizontally, it does not even reach the back burner with a corner.))

Pulls, so pulls!

And that's not even the maximum.)
But the hood has a truly luxurious life - the exhaust is led out directly behind the wall with a window.

And that's not even the maximum.)
But the hood has a truly luxurious life - the exhaust is led out directly behind the wall with a window.

Perfect solution

We are also noisy.) But pulls. She hangs sideways, in an attempt to somehow grasp both cooking and gas in priority.
People once doubted that this is good, so I went to take a picture. From the picture, it seems that the hood is just from the side, but in fact it is also much farther than the hob with a frying pan, that is, there is more than half a meter difference between the frying pan and the hood horizontally, it does not even reach the back burner with a corner.))

What a beauty, you have to be so drawn in! Maybe due to the shape of the T-shaped hood? When the filters are completely above the stove, the suction surface is larger, right?
I have a slope, so it pulls in at maximum speed, But I don't need much. I don't cook a lot of things that often.

What a beauty, it must be so drawn in! Maybe due to the shape of the T-shaped hood?

Rather, due to the fact that there is no long (sometimes clogged) vent behind the hood. channel where she should push the air. The exhaust is immediately behind the wall, all the hood needs to do is to lift two valves. And so yes, all other things being equal, the horizontal pulls better. But people I trust say that inclined people eat with very good absorption. Not all, of course - they are of very different designs, and not always successful.

When the filters are completely above the stove, the suction surface is larger, right?

Here, the hood does not hang over the stove at all; it is located about half a meter from the burner.

Please tell me. Choosing a cooker hood. The kitchen is standard, 8.75 sq. M.
The store advises this one:
Hood TEKA TL 6310 B, only the color is not black, but stainless steel.
Front steel.
mechanical control.
2 halogen bulbs.
Two speeds.
Front detachable and replaceable.
metal filters.
Twin gas turbine engine.
check valve.
Extraction capacity: min. 233 m3 / h - max. 332 m3 / h.
sound power: min. 56 dBA - max. 65 dBA.
The ability to work in recirculation (C3C filter).
Energy class: E.

It is built-in.

I want to know your opinion.

Please tell me. Choosing a hood for the kitchen. The kitchen is standard, 8.75 sq. M.
The store advises this one:
Hood TEKA TL 6310 B, only the color is not black, but stainless steel.
Front steel.
mechanical control.
2 halogen bulbs.
Two speeds.
Front detachable and replaceable.
metal filters.
Twin gas turbine engine.
check valve.
Extraction capacity: min. 233 m3 / h - max. 332 m3 / h.
sound power: min. 56 dBA - max. 65 dBA.
The ability to work in recirculation (C3C filter).
Energy class: E.

It is built-in.

I want to know your opinion.

Good day!
As for the brand, I can not say anything, not very famous did not come across it.
According to the characteristics, it is noisy with not very high performance. In general, I was focused on a performance of 420 in a kitchen of 9 sq.
Have you looked at any other options?

no, I didn't look anymore.

Please tell me. Choosing a hood for the kitchen. The kitchen is standard, 8.75 sq. M.
The store advises this one:
Hood TEKA TL 6310 B, only the color is not black, but stainless steel.

I also did not hear something about such a company in the hoods at all) The first time I come across
And I agree that it is very noisy.
And so everything is standard. The kitchen is small, so it should have enough power. Are you going to withdraw or use in recirculation mode?

The performance of the hoods does not at all depend on the size of the room.

Are you going to withdraw or use in recirculation mode?

Discharge into a vent.

I can't say anything about this brand. I can recommend such options
Kronasteel Kamilla 1M 600 inox

Shindo Maya 2M 60 SS / BG
There are 2 motors if you want more powerful

Thank you all very much for your advice!