melrin
Girls, I have a problem, I need your advice. I have a gas water heater in my kitchen and a stove next to it, and over the stove I want to hang an extractor hood. And this is where the problem arises, I cannot hang the hood with air outlet to the outlet, since reverse draft may occur. I look at all the columns and see that they are all with recirculation and outlet. Is it correct that if I install the hood and do not connect it to the chimney, then only recirculation works? and second, does it make sense to put it, how much does it purify the air?
sazalexter
melrin Recirculation is like a "dead poultice" In the room where the column is installed, there should be ventilation in a separate channel, usually an exhaust hood is tied to it.
melrin
So the fact of the matter is that gas workers do not allow the installation of a branch column, only an air purifier
lega
Quote: melrin

Is it correct that if I install the hood and do not connect it to the chimney, then only recirculation works? and second, does it make sense to put it, how much does it purify the air?

I will not say anything about modern hoods, but I remember in Soviet times my friend had one. The air cleared a little, but then the carbon element itself smelled. For example - she fries pancakes, and smells like yesterday's fish. Since then, my attitude to such hoods has been skeptical - the carbon element with which she purified the air, you are tortured to change.
Maybe there is an opportunity to make a conclusion on the street?
melrin
That is, if I make one more conclusion, can I connect a conventional hood?
lega
Quote: melrin

That is, if I make one more conclusion, can I connect a conventional hood?

In principle, yes, but this separate conclusion needs to be dealt with. I read on the internet about such options, but everything is not so simple there. You need to punch a hole in the wall, install check valves - in short, this is a serious matter. Condensation will form there in winter. Without a serious engineering approach, I would not have dared to get involved. Study the question, and then decide if you can? Maybe, considering all the hassle and expenses, well, her this hood?
melrin
Quote: lga

Maybe, considering all the hassle and expenses, well, her this hood?
I would like to, and the question is not so much about the smells, but about the removal of fat, is this what the regulating hood will cope with?
lunova-moskalenko
Quote: melrin

That is, if I make one more conclusion, can I connect a conventional hood?
You will call the stove-maker. Usually in houses where there are gas water heaters from birth at home (I have one), then there is not one chimney, but several. Let them walk through all the chimneys of your neighbors and yours, and they will probably find a free channel into which you can connect the hood. We have gas water heaters in every apartment in our house, there is also a separate ventilation pole near the stove, and there is a separate one in the sauna and in the bathroom. So in the kitchen, in addition to the two available, there is one more spare. And so in every apartment. But stove-makers find it. They know how to look there and make a duct for you in the kitchen for the hood. We pushed for a gas boiler in due time.
melrin
The whole problem is that I live in a private house of 1915, and there are all chimneys for counting :))) and I understand that I need to beat a new one in the wall, so this option most likely disappears :)))
lunova-moskalenko
Quote: melrin

The whole problem is that I live in a private house of 1915, and there are all chimneys for counting :))) and I understand that I need to beat a new one in the wall, so this option most likely disappears :)))
Clear. Well then, the current beat the wall with the outlet on the street hood. Why doesn't this option suit you?
melrin
scary to touch the house, we have 5 families living there, and suddenly it collapses?
lunova-moskalenko
Quote: melrin

scary to touch the house, we have 5 families living there, and suddenly it collapses?
So there is just a hole in the wall and you will see the hood. It will look approximately like this.
/14/b5f976cbcde245398b11507c8468844f5916f8153524051.jpg.html]How to choose a cooker hood
melrin
and which company is better to choose a hood?
brenno
Hello everyone! Help me please, I have been choosing a cooker hood for 2 weeks already. I stopped at 2 models, but I can't choose one among them. They are very similar in everything and I can’t go straight, I’m lost. I like both of them, at least put all two. In general, I want to ask you to just say which one visually you like best. Here 🔗 and so 🔗... Many thanks to everyone =)
visole
The Ventolux range hood is suitable for our kitchen 🔗... In appearance, it fits perfectly, but what about the quality? Franke still has one, only a little more expensive. I think that both of them are made in China, so there is no point in overpaying. Maybe someone has similar ones - unsubscribe, please.
Niunia
I have a Ventolux hood, only in a different design.
I am satisfied with the work.
Albina
Need some advice, maybe someone knows which slider hood is better?
Wild cat
So, having dealt with the dishwasher (I dreamed about one thing, but they gave me another. Recently I ...), I came here.
Stove 50 cm. Now I am looking for a hood. You also need 50 cm, because the lockers hang back to back. If you redo it again, my husband will definitely beat me. After the last permutation, he has not yet left.
The kitchen is not large, 5.5 sq. Height 2.7. The productivity is 180 m3. (But + stock is still needed)
It will be attached to the common ventilation duct. I will not hole the walls. Pull far.
I liked the citylink "Built-in hood KRONA Kamilla 500, 1 motor, stainless steel"
🔗
None of the acquaintances have such retractable ones. All have a fireplace type.
And I have never come across the "Krona" technique.
Advise, take Ali how?
Albina
Wild catit looks like you, like me, will not get an answer. The subject died out. All who need to have acquired. And who does not need and does not need
Essenia
I approached the choice of the hood very seriously and meticulously. I will write the main parameters that you should pay attention to:
1. The capacity of the hood should correspond to the size of the room (length × width × height of the kitchen and × 13 = the capacity that is needed, but it is better to throw in 100-150 cubic meters. My example is 7 × 3 × 3 × 13 = 819. I took a hood with a capacity of 1000 m3 ).
2 The hood should not be smaller than the hob, but preferably larger. Can be of the same size (60 * 60).
3. Dome, wall, built-in - the choice is yours. But I read that the built-in ones are weaker. I found the dome hood as the best choice for myself. This is the design you like.
4. Single or twin engine? They say that the twin-engine is better and quieter. From personal experience I won't write because I have a single-engine (well, I didn't have two) ((
5. Stainless steel, glass or enamelled. It is very difficult to wash a stainless steel - these rosters. I wash well with my email. I don’t know about glass, but it seems to me easier than with stainless steel.
6. Are the filters dishwasher safe? You need to look in the instructions. Alas and ah, my hands, because I don't have this device (pmm) in the kitchen.
7. Well, for air removal and recirculation - you can read above. I don’t have charcoal filters, my mother took them off, because the hood did not suck up odors well.
8. Conclusion on my street - this winter we did not have any condensation. Truth with smells the cooker hood and warmth sucked famously. I don’t know, maybe I’ll persuade my husband to hook a pipe on the street so that there’s an exit upward. And then we just have the corrugation on the wall closed with some kind of flapping lid (I forgot what it's called).
Maybe I didn't take into account all the points on which I chose, sorry, It was a year ago. I have a Pyramid N60 cooker hood, I am satisfied with it for about 8-9 months.
When I chose the hood, I killed all my family, godfathers and acquaintances (they did not know that it was so meticulous to find fault with a "simple" hood). And I can't buy on the Internet - I need to look, touch. And in our village, none of the sellers know anything hee-hee from what I asked. In general, both sellers and pets breathed freely when I bought IT. I hope I will help someone in choosing.
Njashka
Essenia, and the number 13 is what you had?
Essenia
The number 13 is kind of standard. When calculating the kitchen, the result that came out must be multiplied by 13. Honestly, I did not think of it myself, this is the result of studying the forums about the choice of hoods. Such advice is given there. I have a working kitchen + dining room (combined) through the arch. So I counted everything together and multiplied by 13. When I fry fish in the dining room, there is not even a small smell. For me, it was a priority not to spread the smell of food. Well, she explained as best she could
Lisichkalal
Tell me, please, I choose a hood, I don't understand anything about them (so many different.
Hoods, such types are made at an angle, modern ones, just a screen at an angle, is this a design or are they something special that differ from the rest?
Umka
Quote: Cvetaal
I have a built-in hood Faber, 60 cm
Good afternoon Svetlana!!!

Cvetaal, Svetlana, Faber still functions with you, otherwise I snatched the same one almost for nothing ... Only now all Faber is assembled in Turkey, and the barcode on the box is Italian, and the price is Russian ...
SvetlanaThank you so much for the story about your hard work !!!
Cvetaal
Lyudmila, good morning! Faber has been working without problems since November 2009. Congratulations, I hope it won't let you down
Umka
Quote: Cvetaal
Congratulations, I hope it won't let you down
Thank you very much, Svetlana, boom hope so !!!
Bijou
Quote: Essenia
I will write the main parameters that you should pay attention to:
1. The capacity of the hood should correspond to the size of the room (length × width × height of the kitchen and × 13 = the capacity that is needed, but it is better to throw in 100-150 cubic meters. My example is 7 × 3 × 3 × 13 = 819. I took a hood with a capacity of 1000 m3 ).
No. The performance of the hood has nothing to do with the area and volume of the room.
It depends solely on how much dirt the hood has to remove during operation. When slowly boiling porridge and frying fish (or popcorn), the power will be different, although the size of the kitchen will remain the same.
Quote: Essenia
2 The hood should not be smaller than the hob, but preferably larger. Can be of the same size (60 * 60).
No, not required. Island hoods are often generally tiny in size, but at the same time they perfectly remove pollution. The larger the hood, the higher it can be suspended while maintaining efficiency. In the apotheosis, there are generally tiny column hoods that leave for cleaning directly from the countertop and take dirty air almost directly from the frying pan.
Quote: Essenia
4. Single or twin engine? They say that the twin-engine is better and quieter.
No. You need to look at the construction. If one turbine is installed, then it can be much more efficient than two tangential fans.)
Umka
Quote: Bijou
it can be much more efficient than two tangential fans
Good afternoon Lena!!!

You are a techie, Elena, to the marrow of your bones ... Tangential fans - I don't even know such words ...
Bijou
Umka19,
I even checked them with Google - I wrote these words correctly the first time !!!
Umka
Quote: Bijou
the first time I wrote it correctly
Good girl, I didn't even doubt it !!!
deggion
Which one will be quieter?
That, in principle, pyramida hoods are not bad, but even they buzz if you install them incorrectly. If you want to use a corrugated pipe, then it is recommended to choose a larger one by diameter, since such a pipe will create less hum, but thinner pipes can create various "sound effects".
How to choose a cooker hood
Elena_Kamch
Bijou, Lena, this is yeah !!! So much useful and interesting information! This is where you had to ask when choosing a hood. And we all poked around on the Internet ... Although I'm happy with my hood, it has been working for several years
Umka
Elena_Kamch, Elena, and what is your hood / firm ???
Elena_Kamch
Umka19, Ludmila, Gorenje, like I'll go home at lunchtime and see if I'm sure. And then the memory is letting down ...
Umka
Quote: Elena_Kamch
I’ll go home at lunchtime and see if I’m sure
Elena, thanks and photA if monA ???
Elena_Kamch
Quote: Umka19
photA
Recessed or extended?
Although, it is possible this way and that, the main thing is that the memory does not let Zarubka do it already
Umka
Quote: Elena_Kamch
Recessed or extended?
It is desirable in all poses !!!
Elena_Kamch
Yes, she is so ... modest. It only slides out and slides in, in the retracted form, just a strip above the stove (everything else was covered with a cabinet)


Added on Tuesday 29 Mar 2016 05:53

Umka19, Lyudmila, Well, I came ... Quickly took a picture of how it happened ...
This is how it is extended
How to choose a cooker hood

It snapped a little from the bottom, so that it was clear that one part leaves the other
How to choose a cooker hood

This is how it looks when closed. The structure itself is hidden in the locker.
How to choose a cooker hood

And this is a little below
How to choose a cooker hood
Bijou
Quote: Elena_Kamch
And we all poked around on the Internet ... Although I'm happy with my hood, it has been working for several years
I will say terrible - I bought some of my equipment without using the Internet at all. How to choose a cooker hood ))
Elena_Kamch
Quote: Bijou
bought without using the Internet at all
Well, yes, and such were the times. Came, saw and bought
And there were also when they signed up for equipment several months in advance.
Umka
Elena, many thanks for the photo !!!
P.S. And I also liked the tiles on the apron !!!
Elena_Kamch
Umka19, Ludmila, Thank you! I also like the tiles Spring in Paris. Inspires ...
"Vesna ... and I want to go to Paris again!
You were there? No, I already wanted to "

And there is still such a large structure in the cabinet! I forgot already, but then I considered
Umka
Quote: Elena_Kamch
You were there?
Was, but, unfortunately, not SPRING ...
Elena_Kamch
Quote: Umka19
Was
Great! And I only dream ... ... someday ...
Umka
Quote: Elena_Kamch
Great!
But I have not been to Korea and China ...........
It's just that you have Asia by your side, and we have Europe ... was ... until His Majesty Crisis came

But in general, Elenawhat our years are !!!
Elena_Kamch
Quote: Umka19
In general, Elena, what our years are !!!
Ludmila, I think the same!
Quote: Umka19
until His Majesty the Crisis came
With this you would only somehow cope Or even in Asia, too, you will not walk, if only with your own tent
Umka
Quote: Elena_Kamch
if only with your own tent
And we traveled so half of Europe ... Own car + tents + camping = LAPOTA !!! But to Kamchatka, the estimate was in 2010, so it was more expensive for two than to fly / visit to Cambodia
Oh, they will chase us away from the mudflow with a broom, for our memories ...

Elena_Kamch
Quote: Umka19
chase us from the mudflow with a broom
Also a suspicion arose

We have here for everything they are fighting with tourists mamadaragaaya I think, and who comes here when you can give up in Cambodia


Ludmila, do you just choose the hood or have it already?
Umka
Elena, already bought ... on page 7 boast
ElenaHow to hide messages under the spoiler ???
Elena_Kamch
Quote: Umka19
How to hide messages under the spoiler?
Highlight the message and press the button Sp next to Text Color.

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers