Balabushka
And delicious. Reminded the taste from childhood. On gas in a frying pan, such a taste did not work, it was somehow loose.
natali21
A super pressure cooker would also buy a spare pot. And another question is what to do with the valve? He makes noise.
Sandy
natali21 welcome to us and congratulations on purchasing a pressure cooker

Quote: Sandy


Before closing the lid, you need to check that the silicone O-ring lies tightly under the iron ring!
You don't need to do anything with the valve, let alone be afraid of it There are two valve positions
First position
Pressure cooker Comfort Fy-500 - reviews and discussion
This is the working position at high pressure, i.e. this is how the valve should be during normal operation of the pressure cooker (float recessed).
************************************************

Second position
Pressure cooker Comfort Fy-500 - reviews and discussion
In this position (float raised) we bake on the "baking / cake" program as well as when we fry something with the lid closed hermetically.
We also turn the valve in this way when we need to forcibly release pressure (this causes a hiss, and if a lot of liquid can spit, so you need to release it not abruptly, but by turning the valve a little bit)

The valve won't fall out or fall out unless we unscrew the screw inside the cover, so it's safe.
When typing, the pressure does not hiss from him, he just stands in this position.

There is another valve under the handle, you don't need to do anything with it either. It hisses a little when the pressure is gained, then it abruptly overlaps itself (the hiss and the release of a thin stream of steam disappear), and everything is quiet, not steam, not a sound from the lid for the entire cooking time.
albina1966
Oksana! How delicious you show everything here, tell it !!!!
At first I fell for Liberty, but after your photos and detailed descriptions of recipes, I became a fan of Comfort !!!
Please tell me how many liters of jellied meat you got. I, in principle, look after the skimmer, mainly for jellied meat and meat dishes. A family of meat eaters, you see. It is tempting to have a portion of jellied meat in 2 hours. : girl_in_dreams: Of course, I brew it a lot more. But for 2 times, I think it will be enough. All the same, the cooking time is reduced by several times.
natali21
: kiss3: Oksana thank you very much for your help. Tell me how do you wash the lid? Unscrewing the two large screws is not enough, but on the sides you also need small ones.
Sandy
Quote: natali21

: kiss3: Oksana thank you very much for your help. Tell me how do you wash the lid? Unscrewing the two large screws is not enough, but on the sides you also need small ones.
Unscrew only two screws and the cover is removed, what are the other two? There are no more screws, the rest of the "two screws" are valves
Sandy
Quote: albina1966

Oksana! How delicious you show everything here, tell it !!!!
At first I fell for Liberty, but after your photos and detailed descriptions of recipes, I became a fan of Comfort !!!
Please tell me how many liters of jellied meat you got. I, in principle, look after the skimmer, mainly for jellied meat and meat dishes. A family of meat eaters, you see. It is tempting to have a portion of jellied meat in 2 hours. : girl_in_dreams: Of course, I brew it a lot more. But for 2 times, I think it will be enough. All the same, the cooking time is reduced by several times.

I am very glad that my photos helped you in choosing
Regarding the jellied meat ..... I do not remember how much it turned out ....... probably about 3.5 liters of liquid + meat .... but I did not pour it to the "eyeballs" it is possible and a little more, for the compote of liquid I pour almost to the very rim (just above the maximum mark), it may not be done, but I do
Sandy
By the way, girls who are interested in the quality of the saucepan, so it looks like this for now, since February 22, when used every day, or even twice a day.And frying and boiling and baking
Of course, very little time has passed, but still

Pressure cooker Comfort Fy-500 - reviews and discussion

annnushka27
Oksana, will they tell you when the spare pans will appear, or will you periodically watch yourself?
Sandy
Quote: annnushka27

Oksana, will they tell you when the spare pans will appear, or will you periodically watch yourself?
They said they would call themselves, as if they brought me into their base. As soon as they call, I will inform you that they have appeared

But I want stainless steel, I tried to buy on taobao through an intermediary and waited in vain ..... at first they said that they could, and then that they could not .... I spat and ordered for Alekspress through a friend (because I do not have a card for payment) I'm waiting
Sandy
Quote: natali21

Be a weasel, tell me where you can order a saucepan?

0966535804
0501803639
I must say - you need a pot for the Comfort Fy-500 pressure cooker or name the dimensions of the pot (see the first page) and they will offer the one that is suitable in size from those that are available.
Sandy
natali21 Well, did you figure it out with the valve and the lid?
albina1966
Was in the Metro today. There are no them, I even guess from whose light hand.
On the one hand, I was upset, I stood there for several years, and here I was, and on the other, I was glad that I was picking up money on my Wishlist, and then, you see, they would be delivered.
Sandy
Quote: albina1966

Was in the Metro today. There are no them, I even guess from whose light hand.
On the one hand, I was upset, I stood there for several years, and here I was, and on the other, I was glad that I was picking up money on my Wishlist, and then, you see, they would be delivered.
They promised at the beginning of summer the next delivery will be ... if they did not lie for excuses (I talked on the phone with a girl from the service, they sell both pots and the pressure cookers themselves, so she said that the Chinese who supplied them with the goods explained to her, what are there at the factory what then changes in this regard have not yet brought in any pots or pressure cookers)
annnushka27
Quote: Sandy

They promised at the beginning of summer the next delivery will be ... if they did not lie for excuses (I talked on the phone with a girl from the service, they sell both pots and the pressure cookers themselves, so she said that the Chinese who supplied them with the goods explained to her, what are there at the factory what then changes in this regard have not yet brought in any pots or pressure cookers)
It seems that in China, either changes in all factories, or all pressure cookers are made at one.
Sandy
Beans again

Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion
Lozja
Quote: Sandy

Beans again

Did you cook asparagus by chance? I need to empty the freezer by Easter ... and she's there, lying around, one might say, forgotten.

Usually fried with tomato and roast. What to try in SV under pressure.
Sandy
Quote: Lozja

Did you cook asparagus by chance? I need to empty the freezer by Easter ... and she's there, lying around, one might say, forgotten.

Usually fried with tomato and roast. What to try in SV under pressure.
I don’t have such beans
And what you try, it won't get any worse, just don't digest
Sandy
Quote: natali21

I just don’t know what to do, steam is pouring out of the valve. Cry at least.
Tell me everything in order:
What valve?
How long does it take to steam?
What position is the valve in?
When you unscrewed the lid, you asked about "two more screws", did you accidentally twist them, the ones on the side?
natali21
Quote: Sandy

Tell me everything in order:
What valve?
How long does it take to steam?
What position is the valve in?
After the valve is closed, the valve is located under the handle. Then he starts to fall from the main valve. And I put it as shown in the photo.
Sandy
Quote: Sandy


When you unscrewed the lid, you asked about "two more screws", did you accidentally twist them, the ones on the side?
Sandy
There are two options, either the valve is defective or it was not assembled correctly during assembly.
Sandy
Maybe your valve screw is loosened (from the inside of the cover), try to twist it, it should be screwed on tightly and not move or twist.
rusja
with the same success, you can tell sho in Comfort the same problems with the valve as in Libert with putting on the cap.
There is no perfection in this world
Sandy
Look it is as in the photo (this is a "muzzle" with buttons turned to you)?
Pressure cooker Comfort Fy-500 - reviews and discussion

Sandy
Quote: rusja

with the same success, you can tell sho in Comfort the same problems with the valve as in Libert with putting on the cap.
There is no perfection in this world
You can, if you like it so
natali21
Everything was fine until I took it apart to wash it. How I put everything here and it started hissing, whistling, just horror how I just didn’t twist it.
Sandy
Quote: natali21

Everything was fine until I took it apart to wash it. How I put everything here and it started hissing, whistling, just horror how I just didn’t twist it.
Disassemble and assemble back, you saw how many "spare parts" there are, if you put at least one in the wrong sequence, the valve will not work correctly
Sandy
For all the time that I have it, I have disassembled the valve only once ...
Sandy
Here is the correct sequence for assembling the valve:

Pressure cooker Comfort Fy-500 - reviews and discussion

natali21
Quote: Sandy

Here is the correct sequence for assembling the valve:

Pressure cooker Comfort Fy-500 - reviews and discussion
Big: bravo: thank you Ksyusha for your help. If not for you, I don’t know what to do. And there the figured puck was incorrectly stuck.
Aygul
Quote: Sandy

Here is the correct sequence for assembling the valve:

That’s why it’s quiet, doesn’t hiss and doesn’t splatter when cooking. Do you remember the discussion the other day? And at me my small pressure cooker there is only the valve itself (which is the last one in the photo), and that's all
Sandy
Quote: Aygul

That’s why it’s quiet, doesn’t hiss and doesn’t splatter when cooking. Do you remember the discussion the other day? And at me my small pressure cooker there is only the valve itself (which is the last one in the photo), and that's all
Yes, our valve is complicated, but it works well
Sandy
Quote: natali21

Big: bravo: thank you Ksyusha for your help. If not for you, I don’t know what to do. And there the figured puck was incorrectly stuck.

If you immediately wrote that you disassembled the valve ... would have found out before I thought that you had problems with the valve right from the store
Sandy
Buckwheat porridge with chicken

Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion
Timulka
Quote: natali21

After the valve is closed, the valve is located under the handle. Then he starts to fall from the main valve. And I put it as shown in the photo.

I had the same problem after disassembling the valve, it turned out that I forgot to put the gasket (mixed up)
Balabushka
Quote: Sandy

Buckwheat porridge with chicken

Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion
what program did you cook on?
Sandy
Quote: Balabushka

what program did you cook on?
On Kuroplov 22 minutes
albina1966
Quote: natali21

: (Girls tell me how to post a photo on the forum. Yesterday I cooked potatoes with bacon, but I can't boast.
Come here, they will help you there https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=73109.0
natali21
Pressure cooker Comfort Fy-500 - reviews and discussion

Here's my potato.
Sandy
I have a cake today

Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion
Lozja
Quote: Sandy

I have a cake today

And what kind of biscuit? Chocolate boiling water?
Sandy
Lozja classic biscuit for 4 eggs only with the addition of cocoa (2 tablespoons).
natali21 I wrote the recipe in recipes.
Sandy
Rice with chicken on "Kuroplov" 22 minutes.

Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion
Sandy
Today for the first time I cooked horns from rye flour with bran, then sprinkled with grated cheese

Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion

The taste is so unusual
Sandy
Quote: rusja

And these are sold or made by myself

Ol, my husband bought at the Buffet

Pressure cooker Comfort Fy-500 - reviews and discussion

Typically useful
Sandy
Yes, they are ugly in finished form
Pea mash
Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion
Sandy
I have pizza today

Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion Pressure cooker Comfort Fy-500 - reviews and discussion
albina1966
Quote: Sandy

Albina thanks
I have everything as simple as a "corner of the house" without problems
Let's buy faster, there will be at least someone to talk to and discuss the dishes how to cook, otherwise all the owners of our Comfort have evaporated, or appear only when something needs to be asked
You can't imagine how I want to!
In the meantime, it is not possible to carve out for the Comfort. Just soaped up, my mother went to the hospital. You yourself understand, not before. And while they are not in the Metro, I will wait for the summer, maybe they will deliver, and by that time there will be extra money. And then you alone here are torn, and the rest of the comfort owners are silent for something.

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers