Multicooker Dex DMC-60 (reviews and discussion)

Thanks a lot for the answers

In our DEXline store you can buy a DEX DIP-6 multicooker pan. This is a 2.5mm non-stick aluminum casserole for DEX multicooker.
This is for 60, as I understand it?

I took my spare wheels for Dex60 in Dexline and then there were only pans for dex50 / 60, then there was no dex65 yet, but that was a year ago or more. You'd better check with the managers which models this saucepan is suitable for.

DEX DIP-6.
This is for 60, as I understand it?

Yes, you understand correctly, I also bought and I have a new one 30 grams heavier than the old saucepan
By the way, there is the same promotion on the outlet

Thank you girls, I'll run to buy)

Today I ran in my new pan, baked a curd casserole. It turned out wonderfully, the casserole popped out of the pan without loss, at once. I will only use the new pan for baking.

So even, it's very good that nothing fell apart

Taichka is a cool casserole !!!! :-) :-) :-). The recipe for the studio !!!! :-) :-)

Taichka is a cool casserole !!!! :-) :-) :-). The recipe for the studio !!!! :-) :-)

Here, according to this recipe, baked.
Cottage cheese casserole in a multicooker Panasonic (Ridiculous)

On my "Baking" program, the casserole (for 400-500 grams of cottage cheese) burns all the time, if I cook it manually, what temperature and time should I set?

On my "Baking" program, the casserole (for 400-500 grams of cottage cheese) burns all the time, if I cook it manually, what temperature and time should I set?

I always bake on the Baking program, but not a full cycle, always turn it off early. Usually 45-50 minutes are enough for good baking. In my previous message, I posted a photo of a casserole of 500 grams of cottage cheese, it was baked for 50 minutes, and it takes 45 minutes to bake a biscuit.

Girls, hello everyone! Who can throw at me a link where can I order a new saucepan? I will be very grateful .

Here many people bought on the stock 🔗but now the price.
Although, comparing here 🔗, this price is one of the lowest.

Lena, thanks! Is it cheaper to search? Are these prices now?

Who can throw at me a link where can I order a new saucepan?

Tanya, did you call Alexey for the cup?

Lena, thanks! Is it cheaper to search? Are these prices now?

Tanya, I don't know if it is worth looking for cheaper. Now I can only watch online offers, because where I am, real stores with household appliances are almost all closed, and those that are open set prices such that! I also saw cheaper 🔗.

Tanya, did you call Alexey for the cup?

Nilchik, I’m going to ask, who is Alexey? And where should he write? I just returned home and was a little behind the times ...

Tanya, I don't know if it is worth looking for cheaper. Now I can only watch online offers, because where I am, real stores with household appliances are almost all closed, and those that are open set prices such that! I also saw cheaper 🔗 (remove asterisks).

Lenochka, thanks! But here it is even more expensive.

Hello. Try to contact directly 🔗... A week ago I ordered a bowl and a chopper for a blender - the prices are pleasing. They need to write in the feedback form, respond to the mailbox.

Lenochka, thanks! But here it is even more expensive.

Yes? And it is written 450 UAH. Are they really selling more expensive? Here is a zhezh of radishes, people are misled!

Tanya, wrote in a personal, read.

Hello. Try to contact directly 🔗... A week ago I ordered a bowl and a chopper for a blender - the prices are pleasing. They need to write in the feedback form, respond to the mailbox.

Thank you already!
Thanks a lot, everyone! You can't survive without our forum!

Thank you already!

Will you announce the price later? It will be interesting to compare with dealerships.

OK!
Will you voice your name, sympathetic stranger?

: hi: Alexey. Sometimes I read the site and the forum out of hunger. I don't know what prompted me to look into Temko ...

Quite another matter! Pleasantly!

Will you announce the price later? It will be interesting to compare with dealerships.

Sounding! On Dexline the price is 518 UAH, in other places, about the same, plus, minus.
Thanks a lot, everyone! A separate thank you for Nele !!!

I bought a pot at the end of February from Dexline at the price of 228 hryvnias. I have no words....

A saucepan for Dex at a reasonable price. 🔗 and here 🔗

Girls, I lost my glass, I almost never used it. He, of course, lies somewhere, maybe he stayed at the dacha since last year, well, in general, Fedora has grief. And today on the forum I found a recipe, and there it is necessary to measure the rice with a multi-glass. Prompt e, what volume should we focus on? Weigh the water please, if not difficult, and write how many grams. And I will already think about how to replace it

180 ml of water in a glass under the top.

Zhenya, thank you very much! helped out!

Always glad)

Again, the action for Dexica castroli 239 UAH. here 🔗

Hello girls! I've got Deksik gone crazy ... It's SO boiling at the extinguishing! I cooked borscht, open the lid - there is intense boiling ... There is no question of stewing something with a minimum amount of oil - it sticks. The saucepan is new (already the third since February 2013). Probably, the assistant is quietly wrapped around ... Someone had this?

So at first it should boil strongly, and then, after a while, already a little.
Or does it boil from the beginning of the program to its end?
Why do your pans wear out so quickly? My cartoon is older than yours, but I only recently bought a spare one for baking only.

Taya probably sticks not because the pan is worn out, but because of the high temperature, if you do not interfere in time. I think there is still something with the temperature there

[Taia]

Taia, boils constantly. Probably, the brains are already on one side ..

[Taia]

TaiaI think the pans wear out quickly because the water is hard. I noticed that after washing, when it dries, there is a white coating at the bottom (like in a teapot). I bought a new bowl because of the promotional price, using all the bowls, I keep a new one for baking.

Girls, tell me, please.
Dex 60 burned out. A new spare pot remains. What cartoon is it still suitable for?
Dex completely suited me, I would take a similar one.
Dex 60 seems to no longer sell ((

[Lisichkalal]

Lisichkalal, Sveta, take a look, it is listed here which cartoons fit
🔗
I bought my son one of the listed ones - PHILIPS: HD 3036/03. A very decent cartoon, just practically licked with Dex 60 according to programs, the pan there is very powerful, no worse than Dex's.
Another saucepan from Dex 60 fits Scarlet SC-410, I have it in addition to Dex, but it is weak, there is no fry, no baking, everything in it boils like crazy on almost all programs, milk runs out on milk porridge, in general , is constantly cut down, showing overheating on the display. And the saucepan is flimsy there. So if you don't buy Dex60, then pay attention to Philips. Although Dex is still better, if you find everything, better than him. Phillips fries weaker, it seems, I read reviews about him, not all positive ones, there were problems with the temperature sensor, at one time they wrote that suddenly a stupor happened with multi-brain brains. But in our Philps everything is fine, maybe it was a game like that, but right now they fixed it. My son has this cartoon for almost a year. There's another Philips on the list, but I don't know anything about him.

Tanya, thank you very much !!! followed the link))

Friends, tell me, please.First of all, are there steel / glass / ceramic dishes for Dex DMC 65 - for the purpose of purchasing? Secondly, if not, what is your take on the Teflon / some kind of non-stick coating on the included saucepan? He made a gift, but the joy did not last long, because it turned out that the doctor who gave it to the person was strictly forbidden by the doctor and added that all this is carcinogenic, that they refuse it all over the world, replacing it with ceramics or just steel ... Maybe someone has studied, and there is adequate, impartial information on this? Thank you

Friends, tell me, please. First of all, are there steel / glass / ceramic dishes for Dex DMC 65 - for the purpose of purchasing? Secondly, if not, what is your take on the Teflon / some kind of non-stick coating on the included saucepan? He made a gift, but the joy did not last long, because it turned out that the doctor who gave it to the person was strictly forbidden by the doctor and added that all this is carcinogenic, that they refuse it all over the world, replacing it with ceramics or just steel ... Maybe someone has studied, and there is adequate, impartial information on this? Thank you

the teflon saucepan, if not damaged, does not emit any carcinogens. here in the thread it has already been discussed, look)))

Thank you! If it does not make it difficult, please orientate at least approximately, please, on which page ... 350 pages of discussion is strong), that is, there are no similar pots made of stainless steel, glass, etc., right?

Thank you! If it does not make it difficult, please orientate at least approximately, please, on which page ... 350 pages of discussion is strong), that is, there are no similar pots made of stainless steel, glass, etc., right?

Somewhere in the initial pages, I don't remember exactly. There are no analog saucepans as much as I know.

I flipped through the first 100 pages at the request "Teflon" - I didn't find it ... If suddenly someone remembers where this part of the conversation is, I will be grateful for the tip. So far, with non-Teflon coating found only for DEX DMC-70 (DEX DIP-7) / DEX DMC-71 ( 🔗). Or, for example, for multicooker POLARIS PMC 0517AD, PMC 0523AD ( 🔗). If suddenly someone has any ideas, I will be grateful, or the day after tomorrow I will have to carry it back. Thank you

p. from. maybe someone has a positive experience with similar multi-varks with ceramic-coated pots (in the same price range) - I would also be grateful for tips

[anonimka]

Suddenly someone will be interested in Kidstaff (Ukraine) they sell pans for 370 UAH (seller anonimka):
• Aluminum multicooker pan: DMC-10, DMC-50, DMC-60; PHILIPS: HD 3036/03, HD 3039/40
• Aluminum pan for multicooker DEX DMC-65
• Aluminum pan for multicooker DEX DMC-70 and DEX DMC-71

The lot is called "Bowl for multicooker DEX and PHILIPS"

Good day!
Tell me, has someone already changed their Dex to another MV? I am very pleased with mine, but already "age" .. I want the same reliable one with a solid bowl.

[279 UAH POT FOR DEX 60]

I, too, look closely at different cartoons, ... my deksik has already gone for the 5th year, it works as it did, but still it is not eternal. Now there are so many cartoons stuffed with programs and accessories, and some pots are not very good ... ceramic sticks, with non-stick ones, not everything is clear, but it probably seems so after ours. I have bought a new saucepan for my Deksik. Now, if anyone needs it, in Deksline, Rozetka and other stores, a promotion until the end of the week 279 UAH POT FOR DEX 60and in my opinion to the 65th too. I couldn’t resist, let it still work, and I’ll have time to choose. But there I touched the new dexics 67 and 80 "live", they look so cool, so high quality, I really liked it. Somehow the radish, fili and poly seemed more flimsy, well, not all kanesh, and at me personally. In general, it is very difficult to choose. We will wait, can someone changed and share their impressions

And I would like our bowl to fit the new cartoon.
Here you are dreaming, right?