Carob coffee makers

[Vitek VT-1511]

Gave a coffee maker yesterday Vitek VT-1511.

Congratulations!!!
Luysia, share your impressions, I'm looking strongly in her direction ...

[ukka,]

ukka, the coffee maker still works fine, we use it every day. But somehow I didn't learn how to whip milk with it. Either we have such milk, or such handles ...

[Luysia]

Luysia, I was presented with VITEK 1513 yesterday. The coffee turns out to be very tasty, but the milk doesn't whip too much either. The instructions say that milk should be taken with a fat content of 4-6%, whole, but not from bags for long-term storage, or you can cream the fat. minimum 10%. I tried milk from a barrel - not very much (but I'm not sure that it contains 4% fat.), I bought 10% cream - the result is the same. Maybe we're doing something wrong?

[Rusya,]

Rusya, I'm already spat on this case played enough, it does not work. I only make coffee. Maybe you can ...

[Luysia]

Luysia, I just read reviews in the net, as far as I understand, people either immediately whip milk (and any of them from the store) or not. I’ll probably play a little more with the cappuccinatore and alsoI will spit on this case.

I met on the Internet the barista's advice on how to whip milk with a Panarello tube. There are many nuances. I remember that it is imperative to insert the tube at an angle .. first direct the tube to the wall of the container with milk ... make a whirlpool .. while keeping the tip of the tube close to the milk surface .. so that the tube also captures air. and only then the tube slowly sinks ... in this case, the moment of immersion must be determined by the degree of heating of the container with milk that you hold in your hands ...
In general, it was said that initially all these nuances must be perfected .. and then everything is done without hesitation ... the main thing is to grasp the principle of operation of Panarello
You can also just ask any bartender in a cafe to demonstrate how he does ... unless, of course, there will be no people in the cafe ... from the morning for example ...

[makabusha]

makabusha, thanks for the advice, we will try.

Presented a Bork c800 coffee maker. Can you share your impressions who has the same model? I have never dealt with brewing coffee and handling this unit ... Maybe you can tell me something?

[Jaroslava 333]

Presented a Bork c800 coffee maker. Can you share your impressions who has the same model?

Jaroslava 333
I have such a model. Today he is on a well-deserved rest, I changed it to Nespresso. A good machine, but it turned out to be too confusing for me, it's not mine ... so many body movements because of a tiny cup of coffee ... But I liked the espresso from this coffee maker, and the milk frother did its job well, too, really when compared with Aerochino, then the latter makes a denser foam ...

If anything is not clear, ask, I will try to help at least with advice.

Krosh, thank you for your quick answer, I already have questions: after boiling, the cone is completely filled with water to the very top. why and how to fix it? I have not tried cappuccino yet ... Tell me how to brew coffee for 2 cups at once, there is another filter in the kit. For me, this is an unjustifiably expensive toy, but the children gave it on March 8, you need to master ...

[makabusha]

makabusha, I forgot to thank you. Thanks to your advice, I learned how to work with a cappuccinatore. And absolutely any milk is suitable. Thank you!!!!

[Jaroslava 333]

after boiling, the cone is completely filled with water to the very top. why and how to fix it?

Jaroslava 333, it's just that you haven't tamped the coffee in the cone firmly enough. Try to tamp the coffee as hard as possible with a special spoon (included).After brewing coffee, my "tablet" turned out to be tightly compressed and almost dry.

Tell me how to brew coffee for 2 cups at once, there is another filter in the kit.

Everything is simple here. You need to insert a filter into the horn for two cups and pour in a double portion of coffee.

For me, this is an unjustifiably expensive toy, but the children gave it on March 8, you need to master ...

Not a cheap toy, I agree. But ... since they gave it ... Successful development to you !!!

Krosh, thank you for your answer! I will take into account your recommendations and I will master! Thank you so much!

[makabusha]

makabusha, I forgot to thank you. Thanks to your advice, I learned how to work with a cappuccinatore. And absolutely any milk is suitable. Thank you!!!!

so nice)))) .. and I just remained just a theorist .... while choosing came lack of money and other problems ... wait until the coffee maker ..)

[Jaroslava 333]

Krosh, thank you for your answer! I will take into account your recommendations and I will master! Thank you so much!

Jaroslava 333, always at your service, if you ask anything.

P.S. And also, if possible, to me on "you", okay?

[Crochet]

Crochet , nevertheless, I did not fully understand my coffee maker ... I have questions for you:
one . For some reason, water accumulates under the drip tray, a little, but still there ... Is this how it should be or is there something wrong?
2. Still, there is still water in the horn on top of the coffee, maybe the grinding is wrong (I have a manual coffee grinder, still Soviet times)?
3. The cappuccino maker works, in my opinion, flawlessly, now the child demands a milkshake made from whipped milk ... But with coffee it doesn't work ... I'm afraid to be completely disappointed ...

Greetings to all, my Bork c700 is a reliable, beautiful car. Also, at first I could not figure out what was what, and then I began to call the support service, asked about everything, the experts very competently and in detail explained how to achieve exactly the kind of coffee I needed. Which grind, how much to add, which cups are better, etc. now coffee turns out no worse than in a cafe, as it turned out, almost everything depends on the quality of the coffee itself and on grinding and also on tamping. (she immediately took a Bork coffee grinder to her). I would also like to note that my machine is on almost all the time, so the coffee sometimes turns out to be too hot. As for me, it is best to turn it on 10 minutes before cooking, then the temperature is optimal. I turn it on right in the morning, while I wash, dress, brush my teeth, and you can already drink coffee). Water accumulates in the pan, this is normal, and it should be, after each preparation it is rinsed, self-cleaning or something, I don’t remember exactly how they explained it to me, I just remember that it should be so.

Greetings to all, my Bork c700 is a reliable, beautiful car. Also, at first I could not figure out what was what, and then I began to call the support service, asked about everything, the experts very competently and in detail explained how to achieve exactly the kind of coffee I needed. Which grind, how much to add, which cups are better, etc. now coffee turns out no worse than in a cafe, as it turned out, almost everything depends on the quality of the coffee itself and on grinding and also on tamping. (she immediately took a Bork coffee grinder to her). I would also like to note that my machine is on almost all the time, so the coffee sometimes turns out to be too hot. As for me, it is best to turn it on 10 minutes before cooking, then the temperature is optimal. I turn it on right in the morning, while I wash, dress, brush my teeth, and you can already drink coffee). Water accumulates in the pan, this is normal, and it should be, after each preparation it is rinsed, self-cleaning or something, I don’t remember exactly how they explained it to me, I just remember that it should be so.

LiliANNA, thanks for the tip) I was looking for opinions on this coffee maker. True, they turned to Bork, because they need to use a gift card, so we're thinking about what ...)
Tell me, pzhsta, is the volume of 1 serving of 30 ml enough? My husband found this model for himself, but he got used to filling himself with a large mug of (essno, instant) coffee, then I myself consume coffee a maximum of 1 time a year ..
Could you also tell us about the coffee grinder: model, impressions of the work (size, grinding speed, noise during operation, etc.). There is a separate requirement for the noise level, since the daughter does not tolerate noise and immediately into tears, be it a blender, a meat grinder or a vacuum cleaner
If it's not difficult, could you measure (DShV) a coffee maker and a coffee grinder?
that's a problem ... you need to use the map, but we can't decide what to do))

1. the portion volume is not fixed, my husband always makes double coffee, there are 2 measuring caps included, for one and two cups, so he puts a double cap and pours a teacup of coffee right away. that is, the volume of coffee is not limited, since the water goes on until you turn it off. at least a ladle right away)
2. But I can't say about the noise level in the coffee grinder, because there is nothing to compare with, before that, it was only Soviet, it seemed to be making noise. in this coffee grinder, coffee is simply poured, according to the number of cups, to the risk of 2-4-6-8-12 cups, and then the degree of grinding is set, from the largest to the smallest, the operating time is 12 cups, about 15-20 seconds, more precisely did not notice. makes noise, of course, not without it.
Dimensions (HxWxD): 32x25x30 cm in my kitchen it looks like this , the coffee grinder is removed in the closet, so it is not present in the photo, but it is ordinary in size, no more and no less than that of other manufacturers, it just seems to me that it is better to take from one manufacturer so that there is no "misunderstanding" between the options)
4. I also have a BORK W500 mini stove, also a cool thing!

Thank you for the quick and complete answer!) I didn't see only the model of the coffee grinder and the size, I at least decide, wider, narrower, higher and lower than the coffee grinder (to decide where to shove it), I didn't see the information on the Internet, so I ask
if the model is more difficult to specify, then the price category is also possible (on Bork's website there are approx. 5 thousand, 10, thousand and above)
and the stove is not required (yet)), there is a stove, a good oven, micro and SV, there will be nowhere to place)

model coffee grinder Bork СG700 like this Overall dimensions (H * W * D) 22 * ​​10 * 14 cm. not expensive, it was worth two thousand with something.

I can take a picture of them together in the evening and post them tomorrow

Thank you very much!) There is no need to take pictures, everything is more than clear and understandable) she, it seems, is not with a millstone, with a rotary knife (if she remembered correctly). Is the grinding even? and you can grind cereals with it? or I too swung ...)

I have not tried cereals, but the grinding is uniform. definitely not with a millstone. on the topic of grits, I want to buy a special mill to make flour myself, and wheat, buckwheat, and rice, but so that not a little bit, but normal, so that the bread itself is baked))) so that the coffee grinder is in this is not an assistant)))

I was not going to grind flour, but for children's cereals) in general, I gave my husband a place, I indicated a place for a coffee maker, let him decide what he needs, in the end, he gave a gift card to others, and he drinks coffee much more often)
Thanks for the consultation!)

not at all )

[Dasha904632]

Dasha904632 A work colleague bought this, very happy. Read more reviews 🔗

Are there owners of VITEK VT-1514?
🔗

[anita-ekb]

anita-ekb Did you buy it? If not, take your time. The Vityok technique is worth buying only in case of extreme financial constraint, or if you really like the "design"

anita-ekb, for that kind of money, Vitek, don't even think about it.

[sazalexter Tanyusha]

sazalexter Tanyusha
I haven't bought it yet. For that kind of money - I agree that it is expensive. But! There is a chance that it will fall in price soon.

I am fine with Vitek technique. Now I have a Vitek 1510 coffee maker in use. I am very satisfied

De'Longhi Caffe Treviso coffee maker. I bought it a few months ago. Very satisfied. Inexpensive (hit the share), and sensible. But there is a problem - when pumping a steam horn (without coffee) for "sugrevu", it rumbles and vibrates indecently loudly. It is especially difficult to use in the early mornings. I am afraid to wake up the family. I put various noise suppressing pads. I went to a terry towel four times. To no purpose. Can anyone have a recipe?

The Vityok technique is worth buying only in case of extreme financial constraint, or if you really like the "design"

Our unpretentious Vityok car-type coffee maker has worked well for several years. And after buying a coffee machine, she moved to her husband's work, where she also successfully works to this day.

.

[not andrey]

not andrey Unfortunately, nothing will help, the rumble will continue.

[not andrey]

not andrey Unfortunately, nothing will help, the rumble will continue.

That is, is it so conceived for them? I mean, it's not a marriage? And what about other models of this price level?

[not andrey]

not andrey Carob and automatic coffee makers make noise, the principle of operation implies this. The pump pumping water is noisy and there is no way to get away from it.

Dear forum users! Tired of thinking about the need to purchase a coffee maker and what ... Help! And the question is the following: when buying, for example, Gaggia carob (they say not a bad brand) + Gaggia MDF coffee grinder, the amount is 4000 UAH. For this price, you can buy the simplest automatic coffee machine. What's better?

Dear forum users! Tired of thinking about the need to purchase a coffee maker and what ... Help! And the question is the following: when buying, for example, Gaggia carob (they say not a bad brand) + Gaggia MDF coffee grinder, the amount is 4000 UAH. For this price, you can buy the simplest automatic coffee machine. What's better?

Maybe ask the same question on a narrow-profile forum, on prokofe or ixbt. There they will definitely be able to help you with advice.

Good evening!
I read the topic and still decided to write.
I want to buy a Vitek VT-1513 coffee maker, there are a lot of positive reviews on it, there are videos on the Internet.
there are owners of both the 1511th and 1513th models.
What are your impressions of it after several months / years of use? Thanks in advance for your reply.

I didn’t wait for an answer, so today I brought home this new kitchen animal - I’m already loving her ...
class-class-class! I am happy as a child!
The froth is great for espresso! The cappuccino maker did not disappoint either, from the third part of a mug of whipped milk turned out to be a whole mug ... yummy! Not at all disappointed!

I didn’t wait for an answer, so today I brought home this new kitchen animal - I’m already loving her ...
class-class-class! I am happy as a child!
The froth is great for espresso! The cappuccino maker did not disappoint either, from the third part of a mug of whipped milk turned out to be a whole mug ... yummy! Not at all disappointed!

Congratulations on the coffee maker! Let it serve for a long time and for joy. Enjoy your coffee!
Gain experience, and there, after a year or so, you will want a more serious technique.

Congratulations on the coffee maker! Let it serve for a long time and for joy. Enjoy your coffee!
Gain experience, and there, after a year or so, you will want a more serious technique.

Thank you! With "pods" I do not need! And on a more serious coffee maker, an amphibian will crush me with its slippery paws ... I will use 40 sput more worthily!

I didn’t wait for an answer, so today I brought home this new kitchen animal - I’m already loving her ...
class-class-class! I am happy as a child!

I also fired up to buy "Vitka" I also read a lot of praise in the internet, but I still trust the reviews on our website, in particular yours. Thank you, I'll go and order. I hope this unit pleases you to this day?

I also fired up to buy "Vitka" I also read a lot of praise in the internet, but I still trust the reviews on our website, in particular yours. Thank you, I'll go and order. I hope this unit pleases you to this day?

In addition to me, this coffee maker was ordered from my filing by two more girlfriends. So I took three boxes at once ...
So that's it. Satisfied !!!!!!!! Already several times I have been thanked for choosing this model ... One of them has a family using it several times a day ...
My husband was against it, and now he doesn't use the old one, although I didn't clean it ... Every day he makes coffee with pleasure on THIS!
Well, and I ... I'm just dragging along ...
By the way, she treated her very adult nephew, so he said that in popular coffee shops they serve cappuccino no better! In general, a coffee shop at home!
I am very pleased!

By the way, I forgot to add that milk is whipped wonderfully - of any fat content ... I took both the Cheerful milkman and the jug For the whole family ... Cream, of course.
In general, I approach the choice of milk without fanaticism!

I am very pleased!

Thank you very much for your feedback! I ordered it today, already all in impatient anticipation

Thank you very much for your feedback! I ordered it today, already all in impatient anticipation

I hope you will not be disappointed!
I'm waiting for your impressions!

By the way, I forgot to add that milk is whipped wonderfully - any fat content ... I took both the Cheerful milkman and the jug For the whole family ... Cream, of course.

Can I have a photo of whipped milk with coffee?

Dear forum users, owners of the Bork S800 coffee machine, tell me what to do? I can’t understand what’s the matter: I turn on the coffee maker, but I can’t wait for the coffee, the pressure builds up, but the breed doesn’t pour in ... I don’t know if I’ll explain it clearly, the impression is that a strainer is clogged in the horn ... I have already cleaned with him , and without it, but in vain ... The unit is idle, it only takes up space ... In general, I have only disappointments with this model, to admit very much for such a price and such problems!