Table induction hob

[Yutan]

Yutan, And what company is your induction, if not a secret?

[Tatiana.k]

Tatiana.k, bought in KZ in St. Petersburg. Kitfort firm. Then it was a novelty with us. And now there are plenty of them.

Thank you, too, when I chose to look at them, but stopped at Shteba.

Which manufacturer is up to you. There are a number of companies whose hobs I would never buy.

Tell me, which companies are not worth buying? It is very necessary to decide and make the right choice. If you don't want to write here, you can in a personal. Thank you! I really hope for help!

Convenience in working with burners: "buttons" or a slider (ruler). Buttons are more convenient, the slider can be erased over time and then where to look for the right place to press ...

Are touch buttons more convenient?

In general, when I monitored this issue, I stopped at Electrolux and Bosch.

So I'm looking at Eletrolux, Whirlpool, Goreny (Bosch is much more expensive). But on which manufacturer to choose is the question ... and so far intractable for me ...

And what do experts say about this surface? 🔗
Painfully tempting price - 2376 UAH.

[Vinnitsa]

Vinnitsa, Eletrolux, Bosch, everything else is purely China, at your discretion, including Shteba.

[Vinnitsa]

Vinnitsa,
Well, for example, Hansa, Gorenje, Whirlpool, Veko, Samsung, etc. - I do not associate with good representatives of hobs, sazalexter is right. For the assembly of Teka, which my mother-in-law, I will not speak, I do not remember, but they took it, only because at that moment there was no good choice in the shops of Boshikov and Elektrolux, and the price was fine, although China would have taken navryatli. It seems like this is her model 🔗 control is simple (touch buttons (the slider in the middle is just a drawing, not functional, you just need to press on the plus or minus), chamfers in all four sides). But on the Electrolux, which you showed, there is a slider, which, in my opinion, is not very convenient. (I just didn't understand: either the prices have risen so much, or her model is different in a letter, but this price in February would not suit me)
Pay attention to the letter K on the surface along the left edge - this means that the glass itself is made by EvroKera. There are only two manufacturers of glass ceramic surfaces. These are EvroKera and Schott Ceran. They try to put their logos on the surfaces. I do not know whether their glass is stronger or not, but they were looking for it with these firms.
On account of your Shteba, in my opinion, there are many grooves in which, sooner or later, dirt will start to clog and you will have to clean it out with a needle or knife. I was looking for myself exactly flat, on the previous page I was already showing off.
More observations from life: Teka hums quieter than Shteba, if you accidentally turn it on and immediately turn it off (for example, when wiping it), it buzzes for some time (she has such a program), Teka, even after cooking, buzzes much less. In general, when I took it for myself, there was nothing to compare with, but now I see the pros and cons of my cheap model.
My criteria: absolutely flat surface, good manufacturer, chamfers on all sides, easy operation.

[Vinnitsa]

Vinnitsa, Eletrolux, Bosch, everything else is purely China, at your discretion, including Shteba.

! I have several desktop inexpensive Chinese and built-in Bosch panel, made in Spain, all induction. Boshem is infinitely happy! And how did you live without him?

Oh, what to do? I have always believed that Whirlpool and Gorenje are good companies, you can trust ...

I already got everyone here, but what can you say about such models 🔗 🔗 ? They have a reasonable price. And what is the difference between them?

[Vinnitsa]

Vinnitsa,
In my opinion, technically absolutely identical models, the difference is only one letter, and therefore the difference in control. In one you "+" gain power, and in others immediately by pressing the desired number. For me, this is a good model, there are only no chamfers (the edge is straight), but these are already my troubles))))

Boshem is infinitely happy! And how did you live without him?

After reading the forum, finally, after long agony of choice, I decided - Bosch-PIА611F17E. I think it's an excellent surface ... There is only a little left - to finish the repair, buy a countertop, a surface ... and enjoy the comfort.

[Kitfort KT-102]

Girls (boys)!
I also decided to buy myself an induction cooker for 1 burner.
The choice is between
Kitfort KT-102 🔗 and
Maxwell MW-1916 🔗
The only selection criterion was that the size of the hob was from 12 to 26 cm.
I did not find any other induction machines of the same size, but I have the most popular pans and pans of 26 cm.
Hence the questions for those who have these devices:
1. Is the maximum hob size 26cm? Please measure with a centimeter.
2. Is there a smell of smelly plastic?
These are the main questions. Well, and then your opinion about them in operation: how they are washed, whether they are evenly browning or only the middle, whether they cracked during operation, and so on. And how would you buy them now?
Thank you.

Recently I bought a little Tesler PI-19, very, very happy with it. The temperature is set and power, there are no modes such as soup and frying. In general, she is clever and beautiful, and she also got it for 990r. in Yulmart, there was scotch on the packaging because of this, the discount is almost 2 times

the size of the dishes is from 12 to 26 cm, now I looked specifically.
The temperature is regulated 70,90,120,140,160,180,200,240,260,280 gr.
Power setting 200,400,600,800,1000,1200,1400,1600,1800,2000 W.
The maximum value of the timer is 2h59 min.
In general, I recommend! I am delighted with her wild!

[Ira]

the size of the dishes is from 12 to 26 cm, now I looked specifically.
The temperature is regulated 70,90,120,140,160,180,200,240,260,280 gr.
Power setting 200,400,600,800,1000,1200,1400,1600,1800,2000 W.
The maximum value of the timer is 2h59 min.
In general, I recommend! I am delighted with her wild! More details: https://Mcooker-enn.tomathouse.com/in...ption=com_smf&topic=731.0

Ira, can you give more details?
Is it really the size of the hob 26 cm or is it just written like this? If you put a 26 cm frying pan, does it warm up (fry the cutlets) evenly over the entire surface? And there is no smell of plastic when heated? When the desired temperature is set, is it shown on the display?
If everything is so, then I will also run to order it in the internet, especially since the price is very tempting!

There was no smell at all. They say induction makes some sounds, I heard nothing but a fan, it heats up in a second. A circle is drawn on it, measured - the diameter of the circle is 20 cm. I have a cast iron frying pan 24 in diameter - heating at the moment. I haven't fried the meat yet, but the potatoes seem to be fried evenly. The first day I played with the temperature of violent boiling, I change the temperature to 70 per second, no boiling. After my half-life electric stove, this one is simply wonderful! Take it, she's good! Here's nothing so "advertised" as this tile! : yes: If that I do not work in this company honestly, honestly!

A circle is drawn on it, measured - the diameter of the circle is 20 cm.I have a cast-iron frying pan 24 in diameter - heating at the moment

Ira, thank you for your response. And another request, when you put a 26 cm frying pan, pay attention to the uniformity of frying along the edges and in the center. And then the surface of the glass ceramic tile or plastic too?
And about the temperature, is it displayed on the display?

I decided not to bother and ordered this induction unit. True, it cost me a shipment of 1,810 rubles.
Then I will tell you my impressions about it and give it in comparison with the Profi-Cook sent from Germany.
I bought it earlier.

[Lyi]

LyiThe uniformity of browning depends on the cookware, bottom thickness, workmanship. Tiles use glass as a work plane.

[Sazalexter]

Lyi, The uniformity of roasting depends on the dishes, bottom thickness, workmanship. Tiles use glass as a work plane.

Sazalexter, I changed the dishes on time to Stounline, they are all for induction cookers, I looked specifically when ordering them.
I now have a Profi-Cook induction cooker, a hob, a circle in it 21 cm.
So when frying cutlets on it in a 26 cm frying pan, the middle is already well browned, and the edges are still pale, not fried, I had to change places, which I would like to avoid.
But, in general, I am very pleased with the induction system and decided that one is not enough for me. I ordered another one.

[WARNING!!!]

WARNING!!!
08/18/14g ordered in SOTMARKET 🔗
induction cooker. The phone manager accepted my order, assured me that the induction unit I needed was in stock, and I paid for the purchase with a credit card because of my "big mind".
They had money for 4 days. Today I received a message from them that there is no such tile available and I am offered to choose another one.
My question was whether the manager who assured me that the induction was available and why it took as much as 4 days to clarify the availability of the tile, was bewildered.
I was not going to make any new orders, as I understood that this was just a delay in order not to send my money back, but demanded that my hard-earned money be returned to me.
But for this it turns out you need to wait until they send me an application form, which I will have to fill out, send back to them, after which they will send me money in 10 days.
So far, they have not sent me this application form.
But it turns out that my son had a conflict with the same store, they returned the money to him only after 2 months. He already scolded me that I could not ask him about this store. He also makes many orders through the Internet shops.
So be careful and try not to buy from this store, especially do not make an advance payment.

[Lyi]

Lyi, and I always buy only through those Internet shops where you can pay upon receipt of the goods. Is there no induction on ozone?

So we tried to put all the pots in the house on it (all of them are excellent, with a flat bottom, steel 18/10, at the time of their purchase in the instructions for one of them I remember exactly - it is suitable for induction cookers). And for this foolish plate, therefore, it is not suitable !!! And you know what, the only saucepan came up to it - an old tattered enamel one (miraculously it was lying around! But it's tiny - it's used for cooking sausages! So I figure out what now ... to throw out this idiotic tile?

I bought induction "Oursson" and almost got hysterical in a completely similar situation. Because she frantically went through all the dishes at home. And to understand why the finest dishes from Germany and France do not fit this thing, but the Soviet enamel pots fit - for me it is impossible! Well, all the enameled utensils were taken from the mezzanine to use the tiles, while the kitchen was destroyed due to repairs.

WARNING !!! 08/18/14g ordered in SOTMARKET

I also came across Sotmarket and also only a solid negative! Once there were long negotiations (I tried to buy a vacuum cleaner from them at an attractive price, at the moment they did not have it, and then they said that there would be no supplies at such a price), the second time, however, without prepayment, I ordered the goods, They promised on oath that the goods are in their warehouse, exactly what I need, exactly the same as on the prom, etc., and so on, two weeks later they say that the goods can be received, but the price has increased exactly two and a half times! Naturally, I did not buy such a product, and I also had a fight with the manager on the phone that they had taken me by the nose for so long. As I understand it, this is some kind of strange shop and they have nothing of their own, in terms of warehouses, availability of goods, and so on. They already look for the necessary goods on order somewhere, order, receive, and then resell them to their customers with their own wrap. In general, I support, DO NOT BUY Nothing IN SOTMARKET and never, they will deceive.

These discs for induction cookers are now available at Ozone (14 cm and 22 cm)



🔗

I bought induction "Oursson" and almost got hysterical in a completely similar situation. Because she frantically went through all the dishes at home. And to understand why the finest dishes from Germany and France do not fit this thing, but the Soviet enamel pots fit - for me it is impossible! Well, all the enameled utensils were taken from the mezzanine to use the tiles, while the kitchen was destroyed due to repairs.

So what is easier - take a magnet and check the BOTTOM of the dishes. The sides may not be magnetic, but the bottom will be. The main thing. so that the magnet "sticks" to the bottom of the cookware. Then the magical power of EMP will give the heat

I also choose tiles, my brains are already boiling.
I want to hear your opinion.
I choose between:
KITFORT KT-106
🔗
Philips HD4959 / 40
🔗
and
Profi Cook PC-EKI 1034.
🔗

I have a kitfort tile, I really like it. Has been working for three years without complaints.

I have a kitfort tile, I really like it. It has been working for three years without any complaints.

I also tend to her. But I have not yet fully decided.

I did not find any reviews about Pro Cook and it seems to have been removed from production with all that it implies.

Phillips is a thousand more expensive and twice as heavy (but the case is not plastic, but ceramic).
It only has 6 modes, but the warranty is 2 years.
In general, I'm in thought ...

For this money you can take. She will work out her money. And my cover is like new. Nothing sticks to her.

[thet]

thet, but what about the smell of plastic?
I read that a smell appears at high power.
And more questions: what diameter of dishes do you put (from and to)?
How much does the frying pan evenly warm up, can pancakes be baked?

There was no plastic smell. I brew coffee in a Turk with a diameter of 8 cm. Pancakes are normally fried. They are baked not quite evenly, but this is not critical. The largest dish I have is 26 cm in diameter - just no more. Everything is working.

[thet]

thetThank you very much for the information!

I will also look "live" in the store and make a decision.

[Elena]

I did not find any reviews about Profi Cook, and it seems that it was discontinued with all that it implies.

Elena, I have a German-made Pro Cook, I bought a computeruniverse in a German store.
The tiles are wonderful. I wanted to try another brand of induction, but to be honest, I wanted to be greedy and buy cheap Chinese here, but I got burned with the corresponding market (by the way, they, dogs, I still haven't returned the money, I'm still waiting) and ordered another Pro of the same Cook for yourself and your sister. I decided that they weren’t looking for good from good, but the miser pays twice, as I did.
And this tile is constantly in my work, it stands right on the gas stove on the glass surface. But one is not enough for me.

[Lyi]

Lyi, thanks, I also wanted Pro Cook.
But, for some reason, in many stores they are no longer and will not be (I am on a single-burner), they say they have been removed from production.
There are two burners, but I need a small one for a summer residence.
And with the store it is strictly necessary, promise to sue them, they will immediately move.
There are terms for a refund, and then they have to pay interest.
They pull because they hope that you will lag behind them.

The mother-in-law has a kitfort stove. Cooks well, faster than their old electric. But my husband and I have a 2-year-old Zanussi, with ordinary burners (that is, not glass ceramics), it still cooks faster, and does not make noise)))

There are two burners, but I need a small one for a summer residence.

I don't want a 2-burner either.
Firstly, they have a capacity of 3.5 to 5 kWh, and I don't have such sockets. I'm afraid he won't.
Secondly, my pots and pans are not small in diameter and standing next to each other will interfere with each other. Therefore, I decided to take two single-burner stoves, which will be connected to two different sockets, and where the distance between them can be adjusted.
Why don't you want to order a Profi Cook in this German store? It has already been verified by all of us.

Why don't you want to order a Profi Cook in this German store? It has already been verified by all of us.

I can't wait long and I have doubts about the service center.If removed from production, then there may be problems with the availability of spare parts (if suddenly something breaks).
I decided to order Philips, I have a technique from this company, I am very satisfied.
I read the reviews, they are different, let's see what happens in real life.

Please tell me, has anyone used the induction cooker discs shown on the previous page? I have been using tiles for a long time, I'm happy. But I can't put a copper bowl for jam. I wanted to buy such a disc. My husband had adapted a sheet of iron, everything worked, but after the temperature was set, the tile turned off, the jam was not cooked. So I wonder if everything will be the same with this disc.

Generally, the efficiency decreases from the disk, there will be large heat losses and the meaning of the induction cooker disappears.
And the tile was turned off because the sheet was overheated. The heat did not leave in the same volumes further (into the basin).

and has anyone used induction hob discs,

I bought Frabosk, small. Plate Kitfort 102. The disc heats up instantly and the plate turns off. Do not use. The only moment that I can use is to heat up the disc and turn off the stove, the disc cools down for a long time and you can warm it up, melt it up, keep it cool. But I prefer to melt the same butter in a fondyushnitsa, and the disc was bought for a Turk, it didn't work, the diameter is too small (for a Turk), and the disc does not work correctly with my stove ...
I read that such discs work fine with other stoves, but I don’t know for sure whether they are from the same company or French, 3 tons each.

Girls, I share my impressions!
I bought Philips after all.
To say that I am happy is to say nothing!
Heating is instantaneous, the transition to another mode is also.
No problem. Those who use glass ceramics will very easily switch to induction.
Six modes, but no more. Includes a saucepan.
Some of the dishes fit, even without the usability icon.
The diameter of the dishes is from 10 to 23 cm. Maybe you can use more or less, but I didn't have one at hand.
I tried all my dishes, some are not good (including my Zepter).
I'm only worried about baking pancakes but no frying pan so don't check.

I bought a frying pan. The pancakes are all right!

Good day!
I am choosing a tabletop tile. I want to get rid of the stationary stove completely.
According to the description, I liked Orson with manual twists, Shteba and Hotter.
And also the panels for two burners are of interest - one is a highlight, the other is an induction, but I did not find any non-built ones on the network.
I want a desktop one, so that there is mobility, and that pancakes and eggs are obtained.
I see the advantage of mechanical twists in the fact that you can put a timer on the socket with a delay.
Although the "native" delay of launch is declared in Hotter.
Who has already chosen for yourself, help me decide.

Put it better, not on 4-6 burners, but on 2. It takes only 30 cm in width, but the quality will be better and will take up a minimum of space. My own kitchen is small, but after weighing all the pros and cons, I did so.

[Warsaw]

Warsaw, I join your question, I read it myself, I choose, but so far I can not decide. I have not yet decided on 1 comfort or 2.

[Warsaw]

Warsaw, I join the igorechka's advice, because it is good to have both induction and highlight. The fact is that in portable stoves, induction often scalds too much - it is impossible to adjust the light boiling mode.