Choosing an electric meat grinder

[Anna]

Anna,! I have a Kenwood meat grinder full set, and a dicing nozzle, but since the advent of Gamma, I have never used it. Gamma - "workhorse", light, comfortable, omnivorous!

And I'm not overjoyed at the Kirov meat grinder Gamma.

I have Lepse. This is also Gamma? I forgot something about it, I need to get it and remember why I changed it to Axion seven years ago. But I liked her, especially the vegetable cutter in her is successful.

[Biryusa]

Biryusa, Olya, Lepse is Gamma!

This is my

I remembered about her and immediately missed her. We urgently need to get it and check it for performance.

Yes, she, only I also have a mill in my kit.

Twice I put a second mill in the basket, but I didn't decide whether I want to buy a second millstone or buy a millstone and that's enough.

By the way, about the bushings: they must be original and have a stamped inscription "Axion" on the end.

My sleeve flew while twisting the leaves for tea. where the spare is unknown. I bought two or three pieces in a repair shop at 50 (!) Rubles apiece. We flew one by one even on meat. Then my husband bought in the market, where they sell one spare parts for 80 rubles. I examined it carefully. The material is even outwardly different and there is no inscription. The original has the Axion logo. I ordered three sets of three at the factory. I have been using one for three years. Truth and leaves I no longer twist. So - only from the factory, with an inscription.

These bushings are now on Ozone. Upon careful examination of the photo (especially the one posted in the reviews), the inscription is guessed

I read you and think, why was I so "lucky" - my relatives had bushings with a logo, however, I bought 120 rubles for 3pcs in the dns in the city, so they all flew, however, I bought another pack while I was lying. ..

[Anna]

Anna, Anna67, and which model with a mill? And is it worth it? It seems that a meat grinder is not particularly needed, I rarely use it, but I want a mill for a long time. For Kenwood, tin is both expensive and not, but here it seems possible to combine business with pleasure.

[Nathalte]

Nathalte, I bought the 07-01 gamma for the same reasons.

Moreover, I have a second-hand Boshik and did not want to heavily load it (although later I bought everything from grates to a dough sheeter anyway. A multimixer, a mill and an ice maker were not bought because of the inadequate price.

One model, but different kits. You can buy 1 there everything except a juicer, you can buy 4 - only a meat grinder and a mill separately. I took 1 because there was not much difference in price.
But so far I have only managed to grind coffee (until I switched to manual) and peas. And I forgot to sift the noodles, but I ate the noodles, besides, the devil pulled me to disassemble and reassemble it so tightly that the millstones were a little worn out. For the second year now I have been thinking about buying a second mill, millstones, or it will do so.

[Nathalte]

NathalteNatasha, I don’t know which set with the mill, because I took it in a shop at the factory in Kirov. They have all the bells and whistles there, you can take it separately, in some kit there is something, something is not, I asked for everything, and the seller put it down for me. Mill was ill for a long time, but I used it several times, grinds well.

[Biryusa]

Biryusa, we are Hercules Kenwood Cuch. The car broke down - flew in to replace the gearbox

... Does anyone have such a model of the Mulinex meat grinder or the same company?
MOULINEX HV9 ME730 2300 W

I want to buy, but I doubt it, because I want a normal tomato juicer and stainless steel knives, but in the reviews they write that the cake is wet.I watched the video on YouTube, wet cake from raw tomatoes, but from the first cooked, and then passed through the spinning there is a difference? Or is it double work?

Girls! Tell me, who knows exactly where to call in Izhevsk about the app. parts to the Axion grinder? Maybe someone knows a specific phone?

Here is their official website

🔗

[Marpl]

Marpl, Marina! Elena Bo! Thank you! I want to call them, if they don't answer, then I'll have to ask here.
Maybe someone can answer now? What exactly, what attachments in particular, differ from each other 41 models of Axion meat grinders? I found 41.01 models; 41.02; 41.03; 41.12: 41.23;
In addition, in some models, Axion 41M or Axion Meat Grinder, model 41 professional is simply written.

Here is an article on the best Axion meat grinders

🔗

and

🔗

[Marpl]

Marpl, Marina, thank you! I will definitely read it! Basically, I called them, I found out everything I wanted about Axions. And the main thing! I ordered on Ozone, due to the fact that now Ozone has paid delivery, the Axion 41.02 meat grinder, as the most complete. I managed to order in general with free shipping.
So, it so happened that I ordered two pieces. If suddenly in NOVOSIBIRSK someone needs free shipping, and the price she had on the day of order was about 4600, write in a personal.

I also have such a modification, I have everything I need.

[Marpl]

Marpl,

[Masha Ivanova]

Masha Ivanova, your post got into a storm and disappeared (so in all topics, if you wrote at the time of rework)

[Miranda]

Miranda, Miranda, thanks! I know that everything happened almost before my very eyes. But there was not such an important message.

Here is an article on the best Axion meat grinders

Axion meat grinders are the most sloppy, and only axion sellers praise them here

[Yaroslav Romanovich]

Axion meat grinders are the most sucking

Yaroslav Romanovich, do you have any arguments that axions suck?

but only axion sellers praise them here

I would never have thought that we (sellers) are half a forum here

Axion meat grinders are the most sloppy, and only axion sellers praise them here

[Yaroslav Romanovich]

Yaroslav Romanovich, and what are you going to start praising now (also as a seller, of course)?

Hello everyone!
I read it and I can not get rid of the feeling that those whose meat grinders break down did not read the instructions ... Either they poke obscene things into them, or stupidly overload them ...
And the meat grinders (with the exception of prof., Which are not discussed here) are all the same ...
I sell "Axion"

Axion meat grinders are the most sloppy, and only axion sellers praise them here

We've been exposed!
We registered here on purpose, for 3-5 years we wrote several thousand messages in different topics, just to be able to praise Axion and raise its sales.

[Miranda]

Miranda, nice to meet you
Never mind. The man flew to the forum, the mood was bad .... Us .. l (sorry for the French) and left. I guess it won't appear again
Good mood, positive emotions and creative success in the kitchen to everyone

Axion meat grinders are the most sloppy, and only axion sellers praise them here

but from this moment, in more detail. And then I advised my friend

In addition to advice, advise your friend to make a choice according to your needs and tasks that the meat grinder entrusts. And everything will be smooth. That is, if the task is to process 5 kg of meat per week, you should not take a 100 W meat grinder ... there will be no limit to disappointment, etc. Be guided by common sense and read the instructions for the device ...



I have Axion without any bells and whistles (I don't need them) has served faithfully on all blanks for 3 years already .... the plastic bushing ... nothing broke, the repair kit out of the box is whole .... All I can say.

has served faithfully on all blanks for 3 years ...

vooot. This is the main thing!

vooot. This is the main thing!

Subject to all of the above - yes

What are you going to start praising now (also as a seller, of course)?

Yul, apparently a meat grinder of some well-known brand suffered a fiasco on sale. So the fellow seller decided to raise the fallen image on HP

A bit of philosophy
In Soviet times, the "electric meat grinder" was obtained by combining an electric drill and a manual meat grinder (we do not take more advanced options) ...
Most often, the following picture was observed: A spouse with a drill rested in a meat grinder (we will omit the technical part), a spouse is laying the components ... So, the "spouse" ten times thought what was possible and what should not be shoved into a meat grinder. "I was much more worried about the drill and knew its performance characteristics .... When trying to put something indecent into the meat grinder, the recoil could be quite tangible ...... Now, unfortunately, there is no such" protection against overloads " ...
Therefore, the "knives are bad", and the "splines on the bushings are plastic" and "brand of Mr." .....

splines on plastic bushings

So it's just as good as the plastic ones.

Oh, I almost forgot !!!!! GRILLES RUST !!!!! Ask any normal locksmith and he will tell you that normal metal designed for such purposes cannot but rust! Rather, it may, but this grate will cost like a whole meat grinder ..... Wipe it after washing - and no problem .... I can already hear the objections of alarmists and healthy lifestyle fanatics ... I answer: you eat more metal when you cut bread with an ordinary knife .. .. moreover, every day and several times ...

electric drills and manual meat grinder

Tyuyu, this is very noisy and irrational.
I attached an electric motor to the sewing machine. Very convenient, you can adjust the speed.
And husband, no no, let him eat cutlets)))

GRILLES RUST !!!!!

wipe off and oil. I have it in the instructions.

splines on plastic bushings

so it's right. Otherwise, the "insides" will fly, and so, only the consumable - the bushing.

so it's right. Otherwise, the "insides" will fly, and so, only the consumable - the bushing.

I take off my hat and bow to a literate and wise woman

Oppressed ...

Well ... I ... this ... I will change the CV joint in the car in 15 minutes. Prepared for trial and trophy raids.
But with a meat grinder is more difficult

[Yaroslav Romanovich]

Yaroslav Romanovich, I will also insert my 5 kopecks, but not for you, but for those who think to buy a meat grinder. Last year I had the same choice. After the advice to look at the axion - I was worried for a long time, I can tell my opinion - both in the tail and in the mane, I made teas, let's say, a lot of tea ... (it's not for you to scroll the meat) several bushings flew, I thought about it in advance - I bought it several packs of 3 pieces of relatives. The price for them is a penny. The meat grinder, frankly speaking, was very surprised at work, and if you erase the word Axion, it’s not immediately recognizable. I am sooo happy with the choice and am grateful to everyone who guided me on the right path. And from the rest of the money I had enough for a vacuum cleaner, almost. .. also on a tip from here. I need to PREPARE for the result with less labor costs and I need good workhorses in the kitchen - and not to have an exhibition of appliances in the kitchen - so make the right conclusions, Yaroslav Romanovich

I need to PREPARE for the result with less labor costs and I need good workhorses in the kitchen - and not have an exhibition of equipment in the kitchen

I fully support it! I will not develop the topic, otherwise some may be offended

I look after the meat grinder at the dacha, only for 1-2 kg of meat, once a month. I think to take Axion 31.01. I also liked the Polaris PMG 2027L. Does anyone have Polaris?

Julia, take the proven horse Asion. In it, if anything flies, then penny plastic bushings.

In it, if anything flies, then penny plastic bushings.

Aha!

only for 1-2 kg of meat, once a month

For such a quantity, enough for a lifetime
Only, she has one drawback ....... then, as you get used to, because of such a quantity, it will be reluctant to get her and wash her

There is nothing to think about! Axion! All those whom I advised say thank you. She plows with me! .. Especially in the harvesting season. How much grass has been spinning on it! Imported ones are unlikely to withstand such a load. Grinds any stringy meat without problems. I also use a shredder, but much less often.

[julia_bb]

I look after the meat grinder at the dacha

julia_bb, Yulchik, are you not considering a planetary with a meat grinder at the dacha? The attachment to the planetary mixer will withstand just such a load normally.

It's just like an idea.

[Svetlenki]

Svetlenki, Svetik, no, planetary, as if the dacha is not needed.
I am looking for a simple grinder, I will probably take Axion. In some reviews on the internet I found that knives rust. Here in the thread I read it, everything is fine with everyone, like.

In some reviews on the internet I found that knives rust.

Yes, knives and grates must be thoroughly dried. This is the rule I know for any meat grinder. If it is stainless, then there will be problems with sharpness, as I understand it.

Good luck! I would have made that choice too!