Kenwood Kitchen Machines

[Konvetka]

Konvetka, Lyudmila, on the warranty card at the top of the hotline phone, call it. This is for me at the office. the site was advised. It seems that the master should come home, this is in Moscow. Good luck!

[Marinuly]

Marinuly, I was here faced with the repair of the cache, and so only one Kenwood service in Moscow from the entire list repairs the kitchen of the car

I ran into the repair of the cache here, and so only one Kenwood service in Moscow from the entire list fixes the kitchen of the car

I was offered two to choose from, but only one of them agreed to come home and fix it on the spot.

[Galina]

Galinahope everything goes well!
Girls, made Brownie Chocolate in Kesh Induction. I think the recipe is standard, although everyone has his own, should you put it in a separate recipe? Or is it understandable

one kenwood service in Moscow from the entire list repairs kitchen machines

I was offered two to choose from, but only one of them agreed to come home and fix it on the spot.

This is disgusting - they promise one thing, but in fact it turns out quite another!

[zvezda]

zvezda, Olya, unconditionally Prescription without fail Please

Good afternoon, everyone! Finally, my dream to buy Kenwood becomes real, the client has matured)). I want Cooking chef KCC 9060 S, A question for experienced users, if you took a car now, which one would you buy? Thank you in advance.

Greetings to all! Who is familiar with this Kenwood kMix KMX750RD? How is this apparatus? This is the first time I want to buy such a mixer. Unfortunately, funds are limited. Needed for whipping, mixing. I cook for the house.

Combine Kenwood KMC 013 or maybe this one? It is more powerful than 1400 watts (the first 1000), the smaller bowl is true. And he is with attachments, there is a blender and a meat grinder. I have a meat grinder, a blender and I'm not sure if the rest of the attachments are needed, but power ... or is 1000 watts enough for my home? The brain is boiling already!

[Camilla]

Camilla, the question which one would buy all the same rests on money + understanding what you want from the car, but first of all money. Well, as usual, I am in favor of induction. Nozzles are a gain. With a certain amount of patience, you can wait for the shares on the attachments.

PS When I come across some personalized promotional code, I check it to see if it can be advised. Usually, only scales are given for them, that is, they are no different from the simple kenwood code. Sometimes + sweet gifts from pastry chefs, but relevant only in the city of the pastry chef. But in the video that she scolded on the last page for the incorrectness of both the comparison with kitschen and bad advice (you cannot use the latch with a whisk / flexi / k-shaped, you can break the car) there was a CHEF code, and he surprisingly gives a 10% discount. And yet minus 7-8 thousand rubles is more significant than a bad video. Maybe there are still discount codes, but have not come across yet. While this code works, you can use it.

That is, if KCC9040, then instead of 69,990 rubles. in total - 62,991 rubles. + scales + apron. And if KCC9060, then instead of 79,990 rubles. - 71 991 rubles. + scales + apron. There is also a life package to get -10% - to issue an installment plan and pay it off in full before the first payment. But whether it will give such an amount (that is, with a discount) to issue an installment plan so that another -10% in this way - I don't know.

Finally, my dream to buy Kenwood becomes real, the client has matured))

I hope minus 8 thousand for 9060 will help the dream, and the client will finally mature

[Maiya26]

Maiya26, here someone had kMix. And in the subject dough places mentioned about a month ago. You can try to search the forum.

013 small bowl, you need to understand the tasks, whether it is enough for you, or is it better to look at large bowls. But 1000W. just enough.

[Maiya26]

Maiya26, I have kMix and Major 065. If for a pastry chef, then there are no complaints about kMix.Whips, mixes everything perfectly. There is enough power for this. Bowl 5 l. arranges. I have it constantly registered on the tabletop. It kneads dough worse than 065. But the 065 has a new generation hook, and again the power is higher, so the kneading is much better. 065 is more versatile. But the price is also higher. If you are only interested in confectionery, and you are not constantly going to chop, chop meat and vegetables, knead the dough, then kMix will cope with the task.

and the client will mature completely

a friend's help is simply necessary, thank you, the price, of course, is scary. I ask in a whisper: is it worth waiting for "Black Friday"?

[Maiya26]

Maiya26, my kMix750 works. I am satisfied with 100%, there is enough power for all my tasks: bread - pastry - sausage. By the way, it has a new generation of kneading hook, not the same as that of the kMix500, and more power.
Yes, a lot of interesting attachments - by, you can only dream of flexi. (
But I bought primarily for kneading bread and am absolutely happy with the results.

Thank you very much girls for your help! I will probably stop on it. I liked him externally

[Nija42]

Nija42,

Maiya26,
Yes, a lot of interesting attachments - by, you can only dream of flexi. (

I bought flexi on ebay. For a pastry chef, she is simply necessary, in my opinion. In general, I love kMix very much, almost every day at work.

[Camilla]

Camilla, I still have 023 and 9060. They remember that I had 096 and I was very unhappy when I changed it to 9060. Now, when a year has passed, I can say for sure .. only 9060, and, listen to Miranda, buy by promotional code.
I'll post the recipe later .. I'm here with muscake cakes and mastic got carried away .. just can't tear it off

I can say for sure .. only 9060👍

Thank you!

[Camilla]

Camilla, we are waiting for you in our ranks

Here's a video of the meringue .. really I can't understand why they don't cook on the machine?

we are waiting for you in our ranks

Thank you! This is the third attempt to cling to you. I hope this time it will work out.

Yes, a lot of interesting attachments - by, you can only dream of flexi. (

There is flexi for kMix!

Flexi for kMix machines - Kenwood AX500.

And there is a souffleika.

The kMix "sufleika" is officially called AX511.
But you can also find it by the code - KW716428 or article number AW20000005

Only the high speed nest attachments - blender, citrus press, food processor, multi-chopper, smoothie maker, etc. - cannot be placed on the kMix.

And for the low speed one - all the attachments. There are all options for planetary too. The only thing - I doubt about the sieve-rub, but it has already been taken out of production.

I ask in a whisper: is it worth waiting for "Black Friday"?

Unclear. Yet this is a mono store, not a retailer.
However, in large stores all these days of discounts can be strange, find a real discount on the need for luck.

Hello girls! They brought me a kenwood kmix 750 today. I tried to beat the whites, his tail heats up, or whatever it is called. Whipped for five minutes. I have strange doubts ...

[Maiya26]

Maiya26, "Tail" - where is it? How warm is it? At what speed? Did you adjust the whisk in height? Well, in general, 5 minutes is normal for a planetary, but not to stand with the unit in your hands, but at the same time calmly do other things. You will get used to it.

The top is where the motor is located. I did not touch the whisk, because the instructions say that it is already configured as standard. 5 minutes is normal for what to heat up? It is not boiling water that is heated, of course, but noticeably. Many write that they are not heated at all.

[Maiya26]

Maiya26, 5 minutes for whipping is ok. Do they fight at maximum speed? I don't have kmix, but chef titanium. It gets warm, but slightly. After 15-20 at swing speed - it is already noticeable, although not an iron.

[Maiya26]

Thank you. There are six speeds and then the maximum, I did not set it to the maximum, I beat it on a six. I'll try to do something else, see how it behaves.

Maiya26, my kMix750 works.I am satisfied with 100%, there is enough power for all my tasks: bread - pastry - sausage. By the way, it has a new generation of kneading hook, not the same as that of the kMix500, and more power.
Yes, a lot of interesting attachments - by, you can only dream of flexi. (
But I bought primarily for kneading bread and am absolutely happy with the results.

Maiya26, my kMix750 works. I am satisfied with 100%, there is enough power for all my tasks: bread - pastry - sausage. By the way, it has a new generation of kneading hook, not the same as that of the kMix500, and more power.
Yes, a lot of interesting attachments - by, you can only dream of flexi. (
But I bought primarily for kneading bread and am absolutely happy with the results.

Natalya, is it hot for you?

Natalya, is it hot for you?

Well, how do you compare? After 5 minutes lukewarm. It is felt, but does not cause concern. And when I kneaded it on a brioche, it interfered: there was unnecessary heating, the kneading was very long, and everything was warming up a little (there was more in the motor area, but also the hook and the rest). I had to stop a couple of times and place the bowl with the dough and the hook in the refrigerator.

Hello girls! They brought me a kenwood kmix 750 today. I tried to beat the whites, his tail heats up, or whatever it is called. Whipped for five minutes. I have strange doubts ...

I have kmix 50. I always beat eggs on a biscuit for 12-14 minutes. at the maximum. A little lukewarm in the motor area.

[Maiya26]

Maiya26,

Natalya, is it hot for you?

No, it doesn't heat up like that. Now I went and beat the eggs (there will be an unscheduled biscuit for my husband's joy) at speed 6 - after 5 minutes nothing was felt. I felt some kind of warming 8 minutes after the start, after 10 minutes it became slightly warm, 15 minutes after the start I stopped it - warm. But not hot.
I only once brought it to the state of "hot" and automatic shutdown - when I turned it on on a whole grain rye dough made from a kilogram of flour and sat down to work at the computer for a minute. After 25 minutes, I came to myself from the silence in the house.)))) After 30 minutes, he calmly turned on.

Everything is clear, it is clear why the device was heating up yesterday, we didn't wash it! Yesterday I and my husband drank some vino for his health this morning I got up early, started whipping the meringue again, whipped me for ten minutes! I kneaded the dough for bread later, all the rules!



How to insert a photo? I searched, I looked, I didn't find

Goodnight!
Maybe a stupid question, but: no one printed the recipe book in the printing house? So what would be nice to take in your hands? How tiresome it is to follow the link and scroll ...

And I would have a link to the recipe book. Satisfied with Kesha is incredible! He kneaded my first yeast dough (according to the recipe for Anise - universal yeast dough) - great! Someone wrote that Bosch kneads perfectly - I can compare - Kesha is no worse! Only Boshik was crying and trembling, kneading the dough for 600 g of flour. And Kesha did not even notice this weight)). Silk dough! I'm also happy with the meat grinder - I sharpened the knife, made the minced meat with a bang!

[Lyubasha]

Lyubasha, Hooray !! I am very glad that I liked Keshenka! I have Bosch and before Kenwood appeared I loved him very much (and now I like the company itself), but now Kesha is definitely driving. And what will happen next .. with your pens, so we are waiting for new creations!

[Prus - 2]

I'm also happy with the meat grinder - I sharpened the knife, made the minced meat with a bang!

Prus - 2, how did you do that? I'm foolish, you can't say otherwise, because the meat grinder worked perfectly, I carried the knife and gratings to the master for sharpening, now I don't like it, the meat is wound on a knife, now I'm thinking how to fix it, or try to sharpen it myself, or a knife with gratings new buy.

Kind people, tell me pliz, who disassembled Keshka? Where to do this at all? From which side to crawl? My husband decided to fix my gearshift, but he doesn't know how to crawl up to it

[Kara]

Karacan this help?

[Peter Push]

Peter Push, Natasha, sharpened, as the girls here advised in the subject - assembled a meat grinder, tightened the ring with a wrench and at a speed of 6 gave the knife to work on the grate for three minutes. Excellent result! A knife circle (slightly noticeable) remained on the grate - continuous, without gaps. That is, the knife and the grate fit very tightly to each other.

Kara, can this help?

Thanks a lot darling! Chot so scary Probably better to take to the service

[Olya]

Olya, dear, I also love both Boshikov! And I will continue to use them on the sly. Especially a food processor, while I don't have this attachment for Kesha. Still, it has a 3.9-liter bowl, as I understand it, Keshinoy will have less. And I will not buy a cube-cutter-attachment - in Boshik it is excellent and a cube of a good size. I look forward to Keshina's clothes (nozzles) as a gift for the New Year. The children said they would give me a set of all the attachments that I choose. So for now, of the non-native (that did not come with him) nozzles, I only have a dough sheeter. Now they are on the detuning of pies in Multicooker from the dough that Kesha made. Yesterday I baked half (fits 8 pies), so wonderful! But I didn't take a picture. Today I will take a picture and post it here - all the same Keshina's work)).



Well, my pies are baked. Help yourself, girls - Kesha put his hook. Baked in a multi-coke (multi-body), there is no rift - they are going with my children to Romania.

[Kara]

Kara, Irinawhat exactly is with the car?
It is not difficult to disassemble and assemble.

Well, my pies are baked. Help yourself, girls - Kesha put his hook

Lyuba, wonderful, appetizing pies turned out

Kind people, tell me pliz, who disassembled Keshka? Where to do this at all?

I have a Chef Titanium KVL8300, disassembled from below.

Probably better to take to the service

Why don't you want to invite me home? They called me, asked what happened to the car, asked to send the video to them. Then they appointed a day, the master came with spare parts and disassembled - put everything on the spot. It may take a little longer, but for that, don't carry the car on yourself.

[Prus - 2]

Prus - 2what a beautiful pie (pies)!

And I would have a link to the recipe book

There is a lot of the first edition on the net, type in the search - The book of recipes for kitchen machines Kenwood Chef and Major. Shepter Gianni

And there is pdf freely available for the old induction, but there are recipes without induction -

🔗

Kara, Irina, what exactly is wrong with the car?

Vlad, the speed control knob turned counterclockwise, and very easily without pressing (wiped the car), now at whatever speed you set it, it works at maximum

[Prus - 2]

I tightened the ring with a wrench and, at a speed of 6, let the knife run in with the grate for three minutes. Excellent result!

Prus - 2Thanks, I'll try a grating with a raw hand side. And the pies are good, just a wreath.

[Irina]

Irina, the handle can be removed without disassembly, pull it towards you.
Does it rotate in the opposite direction?

[Miranda]

Miranda, Thank you! Once again helping out!

Does it rotate in the opposite direction?

Yes, it is now rotating.

Irina, the handle can be removed without disassembly, pull it towards you.

And how to put it back? Does it just snap into place? What could have broken inside?

Why don't you want to invite me home?

And I didn’t know that it’s possible. Of course it would be an ideal option than to drag this bandura somewhere. Is this service provided at a regular Kenwood service center?

Yes, it is now rotating.

But how do I understand the speed does not change?
Is the car under warranty?
If so, then to the service.

But how do I understand the speed does not change?

The speed is maximum all the time, whatever you put it on.

Is the car under warranty?

My hero is already almost 7 years old, so there is hardly any guarantee there.

If so, then to the service.

That is, it is better not even to climb yourself?