Dishwasher malfunctions

Girls, maybe someone had this:
PMM Bosch (SCE52M55RU), clean, with salt, I use decent tablets. There are no build-ups of fat or white bloom. Suddenly, at the end of the wash (I tried different programs), when I already need to turn off, error E04 appears. The dishes are clean, only more drops of water than usual, but there is no water in the drain, I checked the filter mesh there - everything is clean, perfect. I called the service, the master said there "your water supply nozzles are clogged with fat!", And I took off these turntables and checked them and "blew" them with water - well, there is no fat there!
What could it be?

[Juliet]

Juliet, According to the error code, flow switch, blockage or breakdown, try to clean the finish with PMM detergent, if it does not help, call the service. In the future, use separate products, salt, Somat powder, rinse aid.

[sazalexter]

sazalexter, but do not tell me if I use the PMM once or twice a week, dry it after work, but then condensation still forms inside, is this normal? And what to do with PMM if we plan to leave for a year or two? Should it be turned off or, conversely, periodically turned on, flushed?

but do not tell me if I use the PMM once or twice a week, dry it after work, but then condensation forms inside anyway, is this normal?

Quite normal, PMM and is designed to work with water.

if we plan to leave for a year or two?

Disconnect from the electricity, the plumbing, the water inside with salt, I would not pump it out, unless of course the room freezes. The door would be left open to prevent the formation of a smell.

[sazalexter]

Quite normal, PMM and is designed to work with water.

Confused that mold can form.
sazalexter, thanks for the advice!

[Belka13]

Belka13, Olga, the mold will die during the next wash, at 60 * C and an alkaline environment there will be no wounded all microbes will die.

[Alexander]

Alexanderthank you calmed down

Girls, Beko's car, where is the salt to regulate?

Answer, who has a Beko car-Where is salt regulated? I shoveled the whole yet .. did not find

[mowgli]

mowgli, what is your model?

Hello! I have a flavia bi 45 delia dishwasher at home, but I haven't used it for about six months. There is water and salt left in the salt and water valve. All this stood and infused for a long time, the water turned yellow and everywhere there were white stains from salt. I want to start over using the dishwasher, but I don't know how to drain and clean the whole thing. If anyone knows how to do this, please contact me.

[Natalia]

Natalia, I stood for 3 months, did not drain anything, turned it on and continue to use it, the salt fell asleep when it was over, everything works

[ega0404]

ega0404, I would also do so, but it is embarrassing that the water is yellow. You don't want to wash the dishes like this. Or is it worth starting once without dishes and then the water will drain itself? Or will it not merge by itself?

Can run with powder without dishes at max temperature, as we clean for example

[ega0404]

ega0404, Thanks for the advice! Tomorrow I'll try and write the result

[Natalia]

Natalia, Open the salt container and simply pour a batch of new salt into it, excess water will pour out of there. That's all.

I wrote earlier about my problem, the Bosch machine, it washes badly as far as I remember, since I rarely used it, but recently she generally started to be naughty, the upper tray hardly ever washed. As if there is no water pressure, and even the upper rocker has stopped spinning from this. Calling the master is a problem, we live in a village, they only fight for a call, let alone for repairs !!! Well, I called everything today, because.and the refrigerator broke down, and without it in any way, it's not a dishwasher! The master is not so hot, I already understand more in dishwashers, I sat and sat there, silently chatting there cheto .... Asks, how much water should there be ??? I say, you must tell me this, not ask me. And then there is no water at all at the bottom. He poured from a saucepan .... and then it started working with excellent power !!! When the water is filled in the aquastop, something itches, in the washing machine and dishwasher the parents have no itching. She said this to the master, she says it is normal. He concluded that the water level sensor was buzzing. They need to take her to the city and poke around with her until he took it, the car was not the same. I have already read today, many write that the valve is dirty in rust, it is removed, washed and everything works. Or aquastop something. I didn’t like the master, and until they took me away, I would like to try (there is a friend who understands in technology, the truth is not in dishwashers) themselves or a valve or aquastop. A question about aquastop, there is a Bosch machine in another place, I wanted to take a hose from there for a sample, but realized that it does not screw in, but the machines enter directly inside. Does my trial mean no cranking? And I read that in general people who are not afraid of leaks are generally changed to ordinary ones. How can I do that? I wrote the sea, maybe someone had a similar problem? Share your experience!

[Oksana]

Oksana, Check the inlet filter for water, this is the mesh in front of the aquastop. Although it seems to me it's still a pressure switch and (or) the brains of the PMM. The machine should pour the amount of water it needs, even if a small stream is flowing. Aquastop should not be cleaned, and it is confusing.

Tell me, how can you determine if the machine has run out of salt and rinse aid?
In my opinion, these two sensors do not work for me, they are constantly on. You can still see the rinse aid somehow .. but the salt .. Approximately how many sinks will 1kg of salt last?

I have a full fill of salt (about 1.2 kg) enough for 6 months with daily use.

[Sana]

Sana, thank you very much! So before NG, no salt is definitely needed.

And in my opinion, the salt sensor has never lit up at all. For five years the typewriter ... I wait, wait, many, many months pass, I lose my patience and go there to see what is in the bunker? There, as a rule, there are traces of salt around the lid, I open and fill up, about 2/3 packs fit in ...

And my often asks for salt, but I have it set to the maximum .. every two or three weeks I definitely pour a full compartment

And my often asks for salt, but I have it set to the maximum .. every two or three weeks I just pour a full compartment

It's strange, maybe it depends on the models of the machines, I also set it to the maximum, but because of this, it only eats away the rinse aid quickly

Waiting, waiting, many, many months pass

And in my instructions for the machine it says that "it can take many, many months before you have to add salt"

maybe it depends on the models of cars, I also have it at the maximum

maybe I have a Zanussi, the rinse aid is separately regulated and I very rarely add it,

How many sinks will 1kg of salt last?

Depending on the hardness of the water. The softer the water, the less salt goes. I have an average hardness, salt is enough for 5-6 months. It's easy to see - unscrew the lid, it will be visible there if there is no salt or little, there will be a lot of water on top. You can try adding salt, it will displace the water and fill the compartment. If there is salt, the container will fill up rather quickly. If the sensors are constantly on, a breakdown is likely or the hardness numbers are incorrectly set. Almost every car has settings for salt and rinse aid.

[Olga]

Olga, we have very hard water. And the water in the salt compartment is always full, after I fill up the salt, it flies down somewhere and covers it with water and after a couple of cycles the button with a call lights up.
I lost the documents from the typewriter and I don't remember how to set these same settings for salt and rinsing.

And the water in the salt compartment is always full, after I fill up the salt, it flies down somewhere and covers it with water and after a couple of cycles the button with a call lights up.

How much salt is included in one go? Maybe you just fall asleep a little?
After the signal that I need to add salt, I almost always have 1 kg. The salt also flies down, the water pours out, I pour it until the salt is under the cap of the tank, it becomes visible.

How many sinks will 1kg of salt last?

My machine eats salt is unrealistic. I fall asleep at least a month. The regulator is at a minimum. The machine itself does not determine the rigidity. There are three knob positions "-", "middle" and "+". The instructions say that in these positions, 20, 40 and 60 grams of salt are consumed per cycle, respectively.

[Vika]

Vika, Salt is usually poured over the neck of the container. Here I close the lid and there is almost no water, solid salt. At one time, indeed, not less than a kilogram, in some cars it happens even more.

And whose car? Maybe look for instructions on the net or on the manufacturer's website? Usually there are the same buttons used from model to model. Worth seeing. Well, the car shouldn't crack the salt like that

Although, Anya Vaughn writes, 60 grams per cycle. So it turns out 16 times from a pack of 1 kg? Gluttonous, however

We recently had it. Gradually, the upper shelf began to wash worse. Then I noticed that the upper rocker does not turn. Exhausted, looking for a reason. It turned out to have become stiff over time and collapsed the O-ring on the fitting where the upper shelf enters the water supply pipe to the top. Because of this, there is no pressure in the rocker and it does not spin. There are no spare parts for our car wash (Ardo). They stopped producing it for Russia. They cut off a piece of the irrigation hose and put it on. But you need to pick up a thicker one that would be denser.

So it turns out 16 times from a pack of 1 kg? Gluttonous, however

oh, somewhere so it works out for me, my Italian is voracious

It turned out to have become stiff over time and collapsed the O-ring on the fitting where the upper shelf enters the water supply pipe to the top.

This ring has also fallen apart. Year 3 at that time used a typewriter. The husband in the hardware store picked up a similar pattern. It works, although the upper basket now sits in the seat not as smoothly and easily as with the "native" one, but it does not affect the work.

I ask the knowledgeable for advice!
On the top shelf, the glasses are covered with some kind of eerie white-cloudy coating, which does not wash off after manual washing.
What could it be? I recently changed the tablets, Ecover to Finish, and I have been using them for a month. Everything seemed to be fine.
The second car wash gave such surprises.
and how can this horror be washed away?

[Mirabel]

Mirabel, good day, I'm certainly not an expert, but maybe it was the finish that behaved like this, depending on what the program was, what kind of water hardness, what rinse aid you have and whether salt is filled in, and the plaque can be easily removed - pour or vinegar if there is an essence of 70% then 2 table spoons or citric acid a tablespoon into the detergent compartment, and run a short program like for glass, I have a temperature of 30 minutes and 45 degrees, everything should be easy to wash

[Calipso63]

Calipso63, Valentine, Valechka! Thank you so much!
Mine is always on the same prog, with a high rate and duration for about a couple of hours, our water is very hard, the rinse aid is the same constant. It seems that the machine does not ask for salt
The finish at first behaved normally, which he might not like after a month of use, and it is he who is recommended for Siemens-Bosch.
Went to wash my glasses

[Mirabel]

Mirabel, or maybe add salt all the same and interfere with it there)))) sometimes it happened that it seems like salt does not ask for something, but it will also appear once, but now I don’t wait when she asks for it myself, from time to time I add and mix so as it says everything in a lump there is not stuck together, and if it stuck together to mix)))))

maybe add salt all the same and prevent it there

I'll do it!

Answer, who has a Beko car-Where is salt regulated? I shoveled the whole yet .. did not find

I also suffered for a long time with this question, probably it is not regulated here, that's who the knowledgeable will answer !! In my apartment, the first installation was 45 cm, there was nothing about setting the salt in the instructions, now the full-size Veko instruction about salt breaks off in words about measuring the hardness of water.

Quote from: mowgli on December 03, 2016, 15:29
Answer, who has a Beko car-Where is salt regulated? I shoveled the whole yet .. did not find

I also suffered for a long time with this question, probably it is not regulated here, that's who the knowledgeable will answer !! In my apartment, the first installation was 45 cm, there was nothing about setting salt in the instructions, now the full-size Veko instruction about salt breaks off in words about measuring water hardness.

and you write what kind of sink model?

[Calipso63]

Calipso63, Valentine, The first stage is passed and the glasses shine!
I cleaned the filter beforehand, although I did it recently. I added salt and lemon and everything worked out!
In the evening I will do the main wash and hope that everything will be fine!

our water is very hard

At the same time, separate means are used and not average tablets.

The finish line behaved normally at first

You just didn't see a sink defect right away.

and you write what kind of sink model?

I have a DIN 26220 eyelid and a small DIS 1520 and a question about the salt setting

Quote: Mirabel from Today at 14:45
our water is very hard
At the same time, separate funds are used and not average tablets.
Quote: Mirabel from Today at 14:45
The finish line behaved normally at first,
You just didn't see a sink defect right away.

mmmm I mainly use powder, but there are also tablets, so to speak, according to the mood)))) but the salt is also the rinse aid along with the tablets)))) the water is also hard

separate funds and not average tablets

what do you mean?
I always use good tablets, salt and rinse aid.
all local friends-acquaintances of Boshi-Siemens and all use only Finish. Looking at them, well, the Finish promotion was

[Mirabel]

Mirabel,

Quote: sazalexter from Today at 04:51 PM
separate funds and not average tablets
what do you mean?
I always use good tablets, salt and rinse aid.
all local friends-acquaintances of Boshi-Siemens and all use only Finish. Looking at them, well, the Finish promotion was

this is about means of the type powder + salt + rinse aid and the averaged means of 3in1 are like tablets and all kinds of capsules, by the way, it is much more profitable to use the powder, since it is dosed depending on the amount and dirtiness of the dishes




lala2,

I have a DIN 26220 eyelid and a small DIS 1520 and a question about the salt setting

Interestingly, I read the instructions from cover to cover, so to speak, I will say that it is straightforward, there are many detailed pictures, unlike my Siemens one, but the bad luck is the feeling that the salt adjustment was simply not printed ... I think that it should also be adjusted by pressing and holding certain buttons, I think you can experiment or write directly on the site of Beko (((

it is much more profitable to use powder

we do not have powder on sale, and the tablets are all 3 in 1, but no one pays attention to it. Without salt and rinse, nothing sensible will work.

And we have powder. And that's a good thing. Only a week ago my dishwasher welled up.
The on / off button is pressed, but the indicator lights are off. And where the program selection buttons are not pressed.
And no one wants to repair dishwashers in our village. ((((

[Mirabel]

Mirabel,

we do not have powder on sale,

then yes, the question of powders disappears, and sometimes I also divide the tablets in half if the dishes are suddenly small, or I have a 45cm sink

Well ... probably Finish tablets don't want to wash the glass.Today I have the same song all the glass is covered with a cloudy bloom.

My sister had a Bosch 45, we were visiting and I was also amazed that all the dishes were covered in white ...
I fixed it by washing on a long program with dishwasher cleaner, and of course, without dishes