Illusive-light
Yes, now again, I have collected water and that's it, silence, the "Brush" indicator is on, no action, the washing process does not start. Yes, I have already tried to launch three different programs, all to no avail, I even removed the side covers from it, I thought, you never know, a leak, aqua stop, etc. ... but no ... everything is dry below ...
Omela
I see .. then only the masters call ...
Illusive-light
Oho-ho .... Sadness ... But all the same, thank you so much for responding) And then I looked for a long time and looked for the Reset button))))))) The most mystical in this case is that three days ago on dacha PMM Virpul ordered to live long ....... Mystic .... Or who jinxed?
Omela
Quote: Illusive-light
And then I looked for a long time and looked for the Reset button
yyy ... so after four years of using the machine, I did not know about the existence of this button at all .. the master enlightened.))
Illusive-light
it's ok))))))
Illusive-light
I called Beko's hotline ... they advised the same machinations ... they passed a verdict - most likely the Moscow Union of Artists died ... I'll go mourn and look for the master ...
Omela
Quote: Illusive-light
... I'm going to mourn
I've been mourning my own for half a year ... it works, then it doesn't.
Illusive-light
Well then I join ... Together it will not be so mournful
Omela
I practically resigned myself to it ... I got used to it ... it was hard when the hot water was turned off. her period "did not work" was once ...

shl. wanted to ask, and what side walls did you remove to see the presence of water ?? I don’t know where ... under the door at the bottom there is such a bar .. is it removed ?? I tried to pick it off, but it does not give in without effort, I also wanted to look at the water inside.
Illusive-light
The left and right walls, they can be easily removed, there are 5 like screws on both sides, only the left wall has such a screwundel right at the bottom, it turns out to be unscrewed only if the machine is tilted, but with a screwdriver in 5 seconds)) The right one is only screwed on the side. The lower bar is also removed, they fell out of me after the machinations with the sides) But it just doesn’t give anything, ate it was removed, there’s some kind of stupid piece of iron))) The best option is the left one, you can see everything at once. And the filling tank, how the water is supplied there, it is transparent, and the tank with salt and the bottom ...
Omela
Catherine, thanks, I'll try to unscrew it.)
Illusive-light
Omela, Yes, it would be for what) I would throw off the pictures ... if I knew how to screw them here)
Omela
Photos are inserted through the gallery. that is, when you click on the reply button, at the very top of the window that opens it is written in red: insert the author's photo into the message. Upload there, then copy the link to the left of the photo and paste it into the message.
Illusive-light
Ooooh! Exactly! Thank you !! I'll try to screw something up)))
Illusive-light
This is the open left sidewall.
Illusive-light
Dishwasher malfunctions
Illusive-light
Dishwasher malfunctions
This is a brine tank, just under it everything is dry and clean ...
Dishwasher malfunctions
Actually the face, so to speak, in an open form, from here we unscrew the screws.
Dishwasher malfunctions
And this is the right side, the air intake of the dryer, below it is a motor and a pump, as I understand it.
Omela
Catherine, thanks for the photo.

Quote: Illusive-light
Actually the face, so to speak, in an open form, from here we unscrew the screws.
I looked at my face, I have screws with flat heads, that is, like nails .. how to twist them? You can only hook it. Or try to pry it off with pliers, so the paint will peel off ... and what kind of screws do you have there?
Illusive-light
Quote: Omela
with flat heads, i.e. like nails ..
This is very interesting ... I have ordinary self-tapping screws - Dishwasher malfunctions
All on them
Omela
I have such nonsense. I'll wait for my husband, let him look, maybe he knows how to deal with them.

Dishwasher malfunctions
Illusive-light
Ah .... so it looks like Pts just like stubs ...are they not plastic by any chance?
Omela
Here's my hat, I also thought it was a plug, but I couldn't pick it off with my hands. Now she took the knife and opened it .. ufff ... means We will unscrew it in the evening !!!
Illusive-light
)))) Keep it up)))) My here is raskurochenaya worth ... upside down, besides ... waiting in the wings) The truth of what is not clear ... apparently according to the scheme - my husband dig deeper - spat, father dig deeper - spat. ..)))) Then we will call the master. Although I really do not want to .. our masters .... "Nasyalnik, something happened ???
Omela
the master came to me three times .. in the end, he said to take it to the service.
Illusive-light
Yeah ... but it's better to the service than where we have taken ours now ... we stopped by, asked in the workshop, they say, take them to us, we will do a diagnosis, they brought it, they say, leave it, the deadlines are from Ndel ... completely brutalized ... right now I will look for SC
Illusive-light
Well, in vain I probably ran into the workshop where they took my martyr today, called, today you can pick it up, repair - 3600, replacement of the recirculation pump. Well ... let's check, unsubscribe after 8 how to install it in place
Omela
Hurrah!!! There is happiness in life!
Antonovka
Illusive-light,
Katya, does this service only specialize in Veko? My Bosch is buggy periodically - water is pouring out from under the door.So my dishes, putting a moisture-absorbing diaper on the floor
Omela
Lena, sIstraaaa, and now it is pouring with me ... only I think it's not about the machine, but about the sewers.
Anna1957
Quote: Antonovka

Illusive-light,
Katya, does this service only specialize in Veko? My Bosch is buggy periodically - water is pouring out from under the door.So my dishes, putting a moisture-absorbing diaper on the floor
In my experience, it drains badly, the drain is clogged with fat. On the advice, she poured half a bottle of the Mole, for 2-3 seconds. pressed the start so that it was sucked in, but did not merge, and left it overnight. In the morning I ran 1 cycle without dishes. Works, does not flow.
Antonovka
Omela,
We have already cleaned the sewer - it continued to pour on the 2nd day after cleaning)))) I have it strange - it can run a couple of times and a week and then wash it normally))
Omela
Anna, thank you, I'll try a mole, you won't wait for your husband to clear the sewer. It pours every time I wash. (
Anna1957
Quote: Omela

Anna, thank you, I'll try a mole, you won't wait for your husband to clear the sewer. It pours every time I wash. (
Scare husband with the prospect of fixing downstairs neighbors
Omela
No, well, she’ll finish me off .. now she’s climbed to look at the drain in the machine. so the plastic cap fell off the rail from the upper basket .. no more strength. and below we have an entrance and my husband is impenetrable ...
Antonovka
Anna1957,
Anya, did you pour it straight into the car ??
Anna1957
Yes. When you turn on any program, the machine first pumps out the remaining water. I took out what can be removed from there, pressed several. seconds a program to pump out the water, then poured the Mole's machine to the floor level, pressed it again for a couple of seconds and left it overnight.
Antonovka
Anna1957,
Thank you, Anyut! Let's try today))
Illusive-light
Lena, no! What are you)) This is so ... handicraftsmen of all trades, we have here near the market just a desk that repairs household appliances! Judging by the description, you have a buggy water level sensor ... nothing else comes to mind ...
Antonovka
Illusive-light,
I see)) But thanks anyway)) Maybe the sensor, I also read about it. I just wanted proven masters - after all, what you don't understand can be diluted in full (((Therefore, I look at the PMM during the wash.
Illusive-light
Well ... what can I tell you, friends in misfortune)))) My machine is working, everything is fine, as there was no problem ...
The only thing that bothers me .... well, very much, so this .... enchanting speed of repair))) Well, straight in general))) Where, God forgive me, the market tent managed to get a recirculation pump in a few hours (!) Specifically for my model (!), replace it (!), run the wash cycle (!) despite the fact that in the afternoon they said - at least a week will take all the catwalking) .... So, as they say ... you need to be vigilant, because - we came to pick it up, I tell them, guys, but where is my old, faulty pump? Answer: Eeeeee .... mmmmm .... well ... Apparently the master took it with him ... well, in short, we did not see him when the master will be HZ ... Gar coupon? oh, yes, we provide .... only we have no forms)))))))) So - my opinion ... some unfortunate wiring fell off there or something else ... they stuck it on place ... for 3600r ... But, you can't go anywhere, but in less than a day I TTT, with a working machine ...
Illusive-light
Quote: Antonovka
can be diluted in full (((
Believe me, they did it to me today))) But ... what you can't sacrifice for the sake of comfort, saving time and other delights of life
Anna1957
Dishes have been poorly cleaned recently. I discovered that the helicopter was not spinning (I don’t know the correct name). Several times, noticing the position of the blade, I opened the machine). And now what i can do
Yulia_red
Help! The touch panel is covered in the LE CHEF dishwasher, does not respond to touch. Maybe someone knows where spare parts are sold, otherwise in our city in the service center they can do nothing at all.
sazalexter
Yulia_red, Julia, how old is the dishwasher?
Yulia_red
A little short of 2 years!
sazalexter
Yulia_redIf the warranty is over, try to repair the control unit, look for an electronics engineer who repairs TVs, very often power tracks near the relay burn out in the units, local power supplies of microcircuits fail, bad soldering ("cold") is commonplace. Ordinary PMM repair services do not really like to repair electronics blocks, they prefer to change them entirely.
Yulia_red
sazalexterThank you very much, we will look for an electronics engineer.
Zabava
Anna1957, Anna, the blade can be removed by pulling it up with a little effort. Maybe something is wrapped around the rod? Try to clean the holes with a knitting needle or blow, for example, with a pear.
Anna1957
Quote: Zabava

Anna1957, Anna, the blade can be removed by pulling it up with a little effort. Maybe something is wrapped around the rod? Try to clean the holes with a knitting needle or blow, for example, with a pear.
Thank you. I just turned the blade upside down. When I was filming, I did not pay attention to her position. And everything spun and washed normally
Zabava
Anna1957, it's great that there were no big problems!

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers