Dishwasher malfunctions

[Illusive-light]

Illusive-light,
Katya, does this service only specialize in Veko? My Bosch is buggy periodically - water is pouring out from under the door So do my dishes, putting a moisture-absorbing diaper on the floor

I also had a Bosch and at first it was also leaking from under the door. It turned out the rubber seal did not fit snugly. Corrected - now does not flow

[kavilter]

kavilter,
Cyrus, this is not the first time for me)) He is 3 years old or more and began to flow relatively recently - about a year somewhere

[Antonovka]

Antonovka,
and you endure this puddle for a whole year, I only lasted for three days. I already wanted to call the SC, but my husband looked well and corrected this gum. Obviously I moved it when I was loading the dishes

[kavilter]

kavilter,
So everyone looked and not every time it flows (mmm)

People need advice. I have a Siemens dishwasher. I loaded the dishes, put them on the hottest sink (almost always mine) for the night. In the morning I got up - I see error E 23 on the display. The inside is full of water.
I unloaded the dishes, drew out the water, turned off the machine (just with a button). We checked the filters, unscrewed the pump cover - everything was clean everywhere. The next time you turn it on, there was no error, they put it on rinsing - everything worked, there was no error.
In the evening I put it on hot again, my husband watched. An hour and a half later - again error E23, but this time there was no water inside.
What would that mean, can you do something yourself?
The most unpleasant thing is that the warranty ends the day after tomorrow. If I call the master today, he will come in a week, does it mean there will already be an out-of-warranty repair?

[SvetaI]

SvetaI, Brand of her garbage can number?

The most unpleasant thing is that the warranty ends the day after tomorrow. If I call the master today, he will come in a week, does it mean there will already be an out-of-warranty repair?

The guarantee, as far as I remember, is calculated from the moment of contacting the service and submitting the coupon in the service.

[Alexander]

Alexander, like this Siemens SC 76M522

The guarantee, as far as I remember, is calculated from the moment of contacting the service and submitting the coupon in the service

So, if today or tomorrow I call the master, it will still be under warranty, right?

[SvetaI]

SvetaI, right.
The canal or pump is clogged, the pump is dying.

the pump is dying

And indeed a canal, and not a year has passed

Greetings to all) Tell me, maybe someone knows? My machine is Ariston LL40, after a long downtime and the move did not work, I called the master, he replaced the pump, left, I loaded the dishes and ... I was upset. after a long wash, she stopped, did not rinse and dry, but the button in the crystal mode simply lit up and all the dishes remained semi-dirty and wet. had to be washed manually. Do you think it is over? Only in vain did you throw out 3000 for repairs? Do you have to buy a new one? What could it be? As I understand it, such a loop failure says that the electronics are covered? Or I'm wrong?

[Lilyanna]

Lilyanna, Call the master, let him figure it out, maybe this is his jamb.

My "Bosch", at the wrong time, "grunted". Error E-24 and faucet lit up. So for the repair: replacing the pump will cost us with work in the office. service center - 8800r. pump (on order), 1500r. work, 900 rub. take away-bring the car Yes, by the way, the dishwasher spoiled me, now it seems that you wash the dishes with your hands.

Today we connected a new PMM burning 64311, poured salt, pushed the buttons, started empty for the first time. She buzzed, thought, and gave e4. There is a small puddle under the typewriter, what does this really mean? Tell me, friends!

I add - the car was taken for a return, they offer to take another. Now choose again ...

Hello, I have a Zanussi machine, I bathed it two months ago, it worked well, now it gives an error that there is no water intake. Moreover, it does not give an error immediately, after rinsing, before the main wash. You can hear how water is drawn into the car, and then bam! And a mistake. We disconnected the hose, there the mesh is clean. What can be wrong?. The pressure in the system is 3 atmospheres (we have a well, there is a water pumping station, a fine filter). Thank you.

[Igrunova]

Igrunova, Elena, if the pumping station is in order, contact the service under warranty.

[Elena]

the error is not given immediately, after rinsing, before the main wash.

Elena, and what's next? Is it turned off by the button or should it be turned off from the socket? And the next day it works again until this critical moment, right?
If so, then it is very similar to what we had.
It turned out to be an overdose of detergent. The product foamed a lot and because of this, the liquid got into the sump and the aquastop worked. Then, if you leave the machine ajar, everything dries up in a day and the machine works again.
Out of fright, we called the master several times, he came, took out the machine, tilted it forward, water poured out of it, and after that everything worked. The master conscientiously disassembled the machine, checked everything and said that everything was in order, there were traces of detergent in the pallet.
Maybe this is just the case for you? The master said powder overdose is the main reason for the calls.
Of course, while the machine is under warranty, it is better to let a specialist look.

turns off with the button, I think there can be no overdose, I use pills.

I think there can be no overdose, I use pills.

Just on pills, the probability of an overdose is much greater - you can pour less powder if the dishes are small and not greasy, but this number does not work with tablets. This is not what I think, it was the master who told me when I asked him about it.

[Igrunova]

Igrunova, Elena, if the pumping station is in order, contact the service under warranty.

So let's do it. On Monday, the store will pick up my assistant :(.

Just on pills, the probability of an overdose is much greater - you can pour less powder,

Sveta, today I'll try it with powder. Thanks for the advice.

And the pills can be adjusted too. Most often it is divided in half. And the halves are enough for high-quality washing.

I'll try this way


Kind time of the day. Yesterday I tried to wash it with half a tablet and lo and behold! My assistant worked fine, but the dishes were washed badly, because they were very greasy. 75 * soap. There was a lot of foam in the bottom of the car after washing ...

Girls and boys, help me, pliz. Siemens machine SR 65M030, in May it will be 3 years old. The salt indicator came on, fell asleep, but it does not go out. Usually it was extinguished immediately after the salt was added, now it has already released the sink 4 times, it still burns. The salt did not change. I have been using Finish salt for all 3 years.

Hello! I would like to thank the participants of this forum for the help. The machine works great! Now I will pour less powder. Thanks again to everyone for their help.

[Igrunova]

Igrunova, jointly rescued your assistant. It seems to me that the pills that you used in the car are bad.
This cannot be so that the dishes are not washed, no matter how greasy they are, and even at the maximum temperature.

Taya, I do not agree with you, my Eared Nanny pills are excellent, and before them I took pills, I don't remember the name, I had to put two pills on one sink.

The Bosch SPV63M50 machine worked for 1.5 years, gave an error E09, there is no heating, they say the heating element burned out in the service. Repairs were said to cost 8 tons. (5 t. P. TEN and 3 t. P. Work) here is the vaunted BOSH ((((

[Angel_day]

Angel_day, Try to contact another service, it may be cheaper. Parts on PMM have grown in price, depending on the exchange rate, and the car itself costs about 60 tons.

Good day! I have a Veko, I don't remember the model, unfortunately. 7 years of soap without problems.Now her handle is broken, so the machine is temporarily idle. And during this very downtime, water is drawn into the machine. Already repeatedly came to the puddle in the kitchen (((What could it be?

[Berry]

Berry, Inlet valve, call the service technician.

Thank you so much

What if they help me without service? Or what to be ready for at least?))
Pmm Candy. Approximately in the middle of the cycle (any, I experimented) it turns off completely. After a while, it turns on itself. And then it turns off again. And it turns on again)))
When the button is forcibly turned off, it turns on itself after a while. The program does not continue, the lights just come on. Does not drain water. I took it out of the socket - you never know, it will suddenly help))) to no avail. The filters are washed. There is no blockage. Just in case.)

[Fotina]

FotinaDid you check the channel, is there no blockage in it? How old is the garbage can? Is there a puddle under the car? Please enter the exact name of the vehicle.

Hello, but I have such a problem: I noticed that lately the machine has been working normally every other time (, I turn on the preliminary rinsing, you can hear how the water is collected, but it does not rinse. it is clearly audible in any program that rinsing first went on, and then washing, now it is not audible at all that the rocker arms were spinning, only at the very end of the program.

Friends! I came to you for help and advice!
My car today gave a Waterproof error, that is, the leakage protection system worked.
The instructions say: turn off the water tap and contact service.
Like this, without options (
Or maybe there are options to fix this matter yourself? Without resorting to the help of the service?
Maybe someone had such a problem?

[Irina F]

Irina F, in my typewriter there were such errors (protection against leaks) at first after the purchase, I really thought everything - I have to take it, change it. The question was resolved by phone, I called a familiar master, it turned out to be trivial - the rinse aid did not like the machine, it created increased foaming and the aquastop worked

[V-tina]

V-tina, Tina, my car is about a year old. I have it in general with whims, if the salt or rinse aid runs out, then the rugatza starts and refuses to wash
My two previous machines are inexpensive and without whims, they could easily wash the dishes, even if the salt ran out and there was no way to run to the store.
And with this ... As my eldest son said today, she herself has to go to the store for salt for that kind of money

Added Thursday, 08 Sep 2016 7:32 pm

We'll have to, nevertheless, call the master, and he goes to our wilderness only for rather big money (

for that kind of money, she herself has to go to the store for salt

maybe someone who knows will appear in the topic - will tell you what to do

if the salt or rinse aid runs out, then the rugatza starts and refuses to wash

Irina, but what about washing with tablets? I do not have a separate button for tablets in my typewriter (Simmens), although I only use them.
I set the minimum value in the salt and rinse aid sensors, although Zero can also be set there. I fall asleep for every fireman once every six months, I don't pour rinse aid at all. Try to reduce the value of the sensors, maybe it will help for now

Added on Thursday, 08 Sep 2016 20:43

As my eldest son said today, she herself has to go to the store for salt for that kind of money

- I just like the words of my son heard the same approach

[Caramelle]

Caramelle, Svetlana, I haven’t tried tablets in this machine (I have a mile), so I don’t even know how it will react. We must try, after we deal with the breakdown.
Previous Boshi - no problem, by the way, the eldest Boshik successfully works with his son in an apartment, and he is more than ten years old)

Girls, owners of Siemens and Bosches.Does anyone use a special nozzle for cleaning trays? I wanted to buy, but I want feedback from real users.

[Irina F]

Irina F, Yeah, Mila, of course, costs like a spaceship, but somehow in Russia there are a lot of complaints about them lately ... and pills, in theory, any machine should use them

Added Thursday, 08 Sep 2016 10:34 PM

Does anyone use a special nozzle for cleaning trays?

I bought it with a spray, I used it a couple of times, but for this you need to remove all the baskets from the machine - and this is also a place to look for, where to put them even for two hours of washing. so now I abandoned this business - it's easier for me to rinse the protrusion in the sink or in the shower in an emergency - especially since I don't cook especially greasy things in them, and after the pies, a good baking sheet is easy to clean. If there is something fatty, I try to cook either in smaller ones, which fits into the machine (I like stellan ones from Ikea), or in foil, or in disposable foil ones. If this contraption greatly affects the price of the issue of the machine itself, I would now calmly refuse it

[Svetlana]

If this contraption greatly affects the price of the issue of the machine itself, I would now calmly refuse it

I don't think it does. It costs around 600-700 rubles.
I don't cook on bare baking sheets either. Be sure to lay a non-stick mat, but sometimes you still have to wash them "for an adult." I mean, ovens. Glass, ceramic, and so are placed. I would like to periodically shove and wash all the baking sheets, grates and from the mesh filter to the heap, and not run with them into the bath.

but for this you need to remove all the baskets from the machine - and this is also a place look for, where to put them even for two hours of washing

I understand this, and there are no problems with the place.
Svetlana, what is your model? And what is the stub? Today I rummaged half of the Internet, I found two types. I have a clumsy instruction, not from my car model and I can not yet figure out which one I need.

Added Thursday, 08 Sep 2016 10:53 PM

Did you like the quality of the washing?

Simmans, I bought a model like 2013, I can send a brand for the weekend, now I'm not at home. This plug was immediately included with the machine. Washing quality? I even thought about not using this attachment for a long time, but it seems normal.

Added Thursday, 08 Sep 2016 11:10 PM

from filter mesh

- is it metal from the hood? I put it in the usual soap mode, fit without problems

Is it metal from the hood? I put it in the usual soap mode, fit without problems

Yes. I also wash them with ordinary dishes. It's like that, thinking out loud
I didn't have it in the kit, so I think

I didn't have it in the kit, so I think

Ksyusha, I am a deviceaholic by nature and I love all sorts of such things, and when I choose a technique, my son acts as a brake, shouting "Again you choose something from the series" lukhari " in action. and you will immediately understand it is necessary, it is not necessary. It is better to regret what you have done than what you could have done and not done

Ksyusha, I'm a deviceaholic by nature

There are no others here
Yes, I probably will.

[Irina F]

Irina F, is your machine still under warranty or no longer? If not, then I can give advice, because we had a similar error 2 weeks ago, which we successfully corrected ourselves

[galchonok]

galchonok, Checkmark, answered in a personal!
Thank you)

but for this you need to take out all the baskets from the machine - and this is also a place to look for, where to put them even for two hours of washing.

No, you only need to pull out the top one, otherwise where are you going to put the baking sheets. Ksyusha, I have such a Bosch PM with a spray. In principle, I am satisfied. But, I still can't get used to wet dishes at the end of the program, in the previous Electrolux the dishes got absolutely dry

Irish, I ordered it, they will bring it tomorrow. Hope will fit my car