sazalexter
Kara, It's a pity of course the old PMM. But now I hope to get used to the new one, try to add rinse aid, it should dry better.
Galya13
Quote: sazalexter
Galya13, It's hard to say, it looks like "brains", only the service will help here. In principle, it is possible to do without pre-rinsing.
Alexander, thank you very much for your answer! Of course, you can do without preliminary rinsing, but it upsets me that I have only had a car since January, I handle it carefully, everything was fine, but here it is ... Therefore, I am upset
Nikollete
Good afternoon, dear forum users! Yesterday I became the owner of the desktop PMM Electrolux ESF 2450 S, made in Italy.
It was bought from a showcase, the last one (we just have temporary housing, we plan to buy a full-size housing later - there is no place, but it’s good to live and now we want to), the price instead of 18,000 rubles. - 10800.
They brought home, plugged in, the on / off button does not work for her. absolutely. But with a combination of other buttons, you can do without it. Just a question for experts - is it not very critical? I tried to wash the dishes - mmm, everything seems to be ok. She is the first with me, I still do not really know which side to approach an unknown animal.
And yet, the owners of such a model have a question: we don't just have rinsing, do we?
toffee
I have a Bosch tabletop and you, Nikollete, are right in them there is simply no rinse aid. But I didn't understand about the button.
And you got a tasty price, maybe because of the button?
Nikollete
I suspect that yes, the price is because of the button, however, we were not told about it, they found it at home and the consultant told us that this model was discontinued now, it was the last one, it was on the window for a year.
Nikollete
: cray The music did not play for a long time ... I started the machine today, it worked for half an hour, and then the whole display went out, something was buzzing in it and that's it ... The tablet did not completely dissolve and, as I understand it, the whole process washing at this point was interrupted. 😠 Dear master bakers, help! It's all? Hand over it? Or can you do something on your own? Yesterday, all day long, they assembled a new sink for it, they even re-glued the kitchen apron in a fit of enthusiasm, and she was like this in the morning ...
toffee
Maybe men will advise something sensible, but I think hand it over. If discontinued, there may be problems with the spare parts. Yes, and wandering from the first days of the beginning. Hand over.
sazalexter
NikolleteYou will not do anything by yourself, to the store under warranty or paid service.
Nikollete
Thank you very much for your answers! sorry to be impossible as ...
Nikollete
Life, however, is more and more miraculous. In connection with the construction of a new sink, I had to change the mixer in the kitchen and reconnect the washing machine and dishwasher, and it turned out that in the parking lot the drain level was turned in the wrong direction (I’m still that plumber), and the washing water got in and the PMM turned off the display. Now everything is working and the cycle on the auto program went fine. I am so glad, so glad !!!! Technology is smart!
gala10
Nikollete, very happy for you! Let your machine serve for a long time and faithfully!
sazalexter
NikolleteSo I also thought about connecting, but did not voice it ...
Nikollete
Sazalexter, voice your guesses for the future, we will only be glad!
Laslovna
Help with advice, I bought a Beko 6530 car at the dacha. But the dishes after washing are always with abundant white bloom. Already played enough with the water hardness and the amount of rinse aid. Dishwashing powder Somat soda effect, can it be a problem? Dishwasher malfunctions
nakapustina
I have a Beko DFSN 6530, I use the finish line (my daughter brings it from a finca), there are no problems But this topic did not go
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=27350.0
V-tina
Quote: Laslovna

Help with advice, I bought a Beko 6530 car at the dacha. But the dishes after washing are always with abundant white bloom. Already played enough with the water hardness and the amount of rinse aid. Dishwashing powder Somat soda effect, can it be a problem? Dishwasher malfunctions
I have all the funds Somat - everything always sparkles
Omela
Eeh, my hmm broke .. It worked the cycle and did not shut down, but makes a noise. I turned off the power, turned it on again - it makes a noise and does not turn on for washing. This is the end, right ??
V-tina
Omela, and looked at the hoses? I had a similar problem with the washing machine ...
sazalexter
OmelaOpen the car, did it drain all the water? If not, check the drain hose, drain for clogging.
Omela
All the water was drained, but by the sound of the suction pump working. I went to check the hose.
Omela
I'll tell you ... My husband wanted to immediately climb to chicken the shelf, for we (pmm) barely shoved it under the countertop. But I had to urgently go on business, so they left me until evening. Now I have arrived, turned on, it is not buzzing, it works, mmm, although I did it on a short program. What it was and where it went is a mystery of nature.
toffee
Mabudo she was scared of raskurochivanie?
Omela
Xs why she was scared, but the symptom is not good. (
Sana
What kind of machine? I had Siemens, there was a similar problem. On a long program, the pumping pump turned on, as it were, and pumped until it turned blue, did not turn off. On the short program, I worked normally at first, but after 3 times the same story began. The master came and said that "the brain". They knocked out the typewriter, pulled out the brain, took it away, brought it back in a week, said - everything is fine with the brain, but he doesn't know what about the typewriter. They called another craftsman, he changed some sensor in 5 minutes, said that this was their usual problem. Launched - it works. It has been working for 2 years. Pah-pah-pah.
Omela
Quote: Sana

On a long program, the pumping pump turned on and pumped until it turned blue, it did not turn off.
Has included today on a long program and exactly the same garbage. I have BEKO. It means all the same the master will have to be called.
Olika
There was a similar problem, a bone got into the pump blade, and how the riddle got there, I probably didn't see it. This is the reason why the pump did not pump.
Aristonka
Hello everyone
The dishwasher Ariston washes very badly. during operation, water is constantly drained into the septic tank in a thin stream - about half a liter per minute. Wash this is not normal - all the detergent is washed off into the septic tank? Need to call the repairmen?
sazalexter
Aristonka, Check the PMM connection for draining water, you do not have a "break" in the air, a rarefied medium forms in the drain pipe, water flows by gravity.
Antonovka
sazalexter,
Alexander, and I also have a question on the PMM - she began to ask me more often for salt and is not at all interested in rinse aid - doctor, what's wrong with her ??
sazalexter
AntonovkaHow old is PMM? If 5-7 look at the rinse aid sensor and the electronic unit, for dried electrolytes and non-soldering.
Antonovka
sazalexter,
She is 3 or 4 years old. In short, it's sad somehow, we ourselves won't see it for sure ((Thanks
Aristonka
Quote: sazalexter
Aristonka, Check the PMM connection for draining water, you do not have a "break" in the air, a rarefied medium is formed in the drain pipe, water flows by gravity.
Thanks to the PMM repair guru - we will check)))
Lyusichka
Question: PMM Zanussi ZDT 120002 FA - age 1 year, on Saturday I filled up salt to the eyeballs, and today asks for more. Five days have passed what happened to her?
sazalexter
Lyusichka, Salt is not dissolved, concentration is low, add more. Or the salt is of poor quality, change it. It won't help, we'll think.
Lyusichka
I fell asleep to the eyeballs and loosened it with a spoon so that it would fit more (maybe that's why?, Maybe it didn't dissolve, I'll come home, I'll open the salt compartment, I'll see), salt - Calgonit finish grains are large, before that I used the German Denkmit with small grains, everything it seemed to be normal.
Creamy
Once the PMM, too, did not see the poured salt at close range. The point turned out to be that the salt was in huge tablets and obviously there was no proper concentration in the solution. As soon as I replaced the salt from another manufacturer, PMM immediately saw the salt.
Taia
Quote: Lusichka
I fell asleep to the eyeballs and loosened a little on top with a spoon, so that it would fit more (maybe that's why?
And on the pack you did not determine how much you put in? The whole pack, half?
I not only pour it to the top, but also melt it with a spoon, press it down. It gets wet and sinks heavily inside, I still add some sleep so that it is to the eyeballs. And I also pour Calgonit finish, large, as it seems to me it lasts longer.
Lyusichka
I fell asleep under string, almost a pack of 1.5 kg (a whole pack never fits, always remains a little) with a spoon trampled down and loosened.
Yesterday I opened the compartment for salt - there was no trace of it there, not a drop. So, that option with the fact that it is poorly dissolved has disappeared.
I will try option No. 2 "low-quality salt", I will return to the old salt, see what happens, then I will report back.
Lyusichka
sazalexterThank you for the hint, after all, it was low-quality salt (suspicion fell on it because I bought at a stock and the price was 2 times lower than usual), I fell asleep with another, until a week and a half and the flight was normal.
ebolena
Tell me, I forgot to pour a liter of water into the salt dispenser before the first use, but I poured the salt, what should I do now?
ebolena
Tell me, I forgot to pour a liter of water into the salt dispenser before the first use, but I poured the salt, what should I do now?
ebolena
Tell me, I forgot to pour a liter of water into the salt dispenser before the first use, but I poured the salt, what should I do now?
Antonovka
ebolena,
I suck the water off with a big enema even before the usual regular filling of salt
* Anyuta *
ebolena, pour a liter of water on top and stir
sazalexter
ebolena, Pour the water.
sazalexter
After working for 10 years, Electrolux ESF 4151 broke down for the 2nd time, on the very holiday of January 31, it gave an error i30, aquastop worked. An autopsy showed that the gasket for the temperature sensor of the parts had been corroded. Gasket No. 1118535036 or 1118535010
used in almost all PMM Electrolux, AEG, Zanussi.

Dishwasher malfunctions


The breakdown was preceded by a symptom, black scraps on the dishes, as it turned out, these were pieces of a sprawling gasket.
toffee
Quote: Antonovka

ebolena,
I suck the water off with a big enema even before the usual regular filling of salt
What about the fig? Is that so?
Katya1234
sazalexter,
Alexander, I sympathize. It's good that the breakdown was quickly found.
Antonovka
iris. ka,
So it is more convenient to pour salt - water does not protrude
perevetich
Good afternoon, dear members of the forum! Help me please!!!! PMM BOSH SRS45T62EU When you start any program, it starts working as expected. But in the middle of the program, it drains all the water and does not pump it anymore, although the motor is running. that is, it turns out 2 times the water is filled and 2 times it is drained and 3 times does not want to fill it. I tried to just pour water into the machine (as they say from a bucket straight into the inside) after the gulf, it immediately starts to wash ... After the end of the word, it starts to drain it as it should be ... What is the problem, help

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers