Bosch food processor - cuts into cubes!

And for what?

Skeletons Separate the bones. ))

I experimented, I get a little liquid, just a little.

Here is an ambush.
Okay, I persuaded, I won't.

In this way, you cannot completely separate the bones only - the mesh is too coarse.
You will have a lot of peel, which means you will lose more nutrients.
If you want completely pitted, then you need to wipe it manually through a fine mesh-sieve.

girls, please advise a harvester if there is one that would be cutting into cubes, french fries, a shredder, and for potato pancakes if of course there is one

[kloki]

kloki, so you are in the topic about this harvester!

[kloki]

klokiThe Bosch 5529 has all the features you need, but for the fries you will need to buy an extra drive (found the cheapest in Comfy). For potato pancakes, you can also use a complete fine grater, although people buy a separate disc for them.

[kloki]

klokiThe Bosch 5529 has all the features you need, but you will need to buy an additional disk for fries (I found the cheapest in Comfy). For potato pancakes, you can also use a complete fine grater, although people buy a separate disc for them.

but I did not find a potato cutter in the package for this model, I did not read the topic of sorry, maybe somewhere it was mentioned about it

answered dopleta, thanks Barmaleich!

I ordered this miracle cube for myself, so take it into your ranks tomorrow to bring

thanks girls for the hint on this model! made Olivier in the cube brought today and mayonnaise in it, in a blender)) krasoteeeeeen.
but did not understand whether it is possible to wash all parts from it in the dishwasher?

[kloki]

kloki, sorry, did not specify. Additional inexpensive discs were at Foxtrot (cheaper than in the service). And at Comfy, the harvesters themselves were cheap.
You can also get into the sale. 🔗
I bought from them, the wheels are original, solingen steel.

In any case, no one bothers to find a store on your own.
Again, I personally consider the disc for potato pancakes a useless waste of money, enough native discs. But this is a subjective opinion.

A couple of tips:

• Parts can be washed in the dishwasher, although the best results are obtained by hand washing with a soft brush. Be extremely careful, the knives are very sharp!
  
• When working with the main bowl, you can leave the blender bowl on the processor. In this case, it is better to remove the knife block from it. This will protect the blender from wear and tear.
• If you follow the instructions for the combine and do not expose it to heavy loads, the machine will last a very long time.
  
• When cleaning the cutter mesh, it is best to push the remaining food from the back of the mesh. That is, we disassemble the cube cutter, take out the mesh, turn it over and push the products with a pusher from the back side. This will protect the netting from damage, but there will be more food waste. Please note that the instructions advise you to clean the knife net from the front.
  

For example, I went to the forum to find out - which is better, a multicooker or an airfryer? in 2011

)))) oh this is definitely about me too))))

today I made a salad: cabbage and onions for a 1mm shredder, tomatoes, cucumbers, grated for fries, oh, how can you eat, I love this harvester, I have everything from technology, but I don’t understand why I thought the harvester was not a necessary thing at home, maybe because it’s not there were so many cuts of all kinds in one copy, today I planted soup on it, yesterday stew, the day before yesterday Olivier and mayonnaise in a blender

it looks like a salad the cucumbers did not come out very nicely, but given the speed with which this salad was made, it is forgivable, I never liked to chop cabbage, despite the presence of a Berner grater and lo and behold, a solution was found

Tell me if anyone knows what you can cut green onions on? with a knife in the main bowl, the dill was cut well, but no onion, did not want to.

Tell me if anyone knows what you can cut green onions on? with a knife in the main bowl, the dill was cut well, but no onion, did not want to.

My green onions always cut badly in the combine.
Someone advised in a large bunch and in a tray, but it also came out badly.
More beautiful with your hands.
But the onion turns out ideally.

Day everyone, help who can, there is no time to read the whole topic, there are six hungry mouths at home, tell me what kind of nozzle you can make condensed milk cream + butter, do you need to buy some other nozzle? We have mcm 5529

Girls, hello! With a desire to buy a combine, I tuned in to a small Philips HR7762, but it turned out that there was no time to buy it. And then I saw a "cube" at a bargain price, less than 5 thousand rubles, and now I risked ordering, but still in thought - my kitchen is "Khrushchev", small, is it still worth taking? I cook for a family of 4. Shredding cabbage thinly for salad, dough for pancakes is relevant - many write that they do it in a combine, only with a disc or with knives? Is there a dough for muffins? Do you need to buy a Julienne disc for carrots in Korean?
I was very interested in the rub for berries and mashed potatoes. There is no such in phillips. How dry are the leftovers from berries such as raspberries, sea buckthorn and tomatoes? And another question: for small volumes of products, should this combine be used, for example, for frying into soup from onions and carrots at one time?

Most likely, these questions have already been asked, but I think it will be easier not only for me if someone gives a short answer, especially with the accumulated experience of using this combine. Thank you very much for your answers.

We also recently bought Le_Nok, I allocated a separate place for him in the dishwasher, so there are no problems with getting out, the grater-shinka disc immediately took the extra attachments, for french fries and a julienne disc, I am in demand. The first one I asked for was a sieve, I only made a tomato, there was cake after the juicer, so I still got so much pulp by passing it through a sieve. I crush everything for the soup, first potatoes, then onions and carrots, changing the attachments, then it justifies itself. So far, all I can answer, someone else can say what.

[marisabelka]

marisabelka, Thanks for the quick response . And on the julienne disc, the carrot turns out almost like a store in Korean?

Yes, very similar

I don't even know what to write. I do everything on it. Shink, rub, cut into cubes, make dough for muffins, mayonnaise, cocktails. Only the minced meat did not like to do. The veins remain. It is necessary to take the meat completely clean, without films. Everything else is just fine.

[Chamomile1]

Chamomile1, thanks for responding. Do you make muffin dough with knives or a disc? I also drew attention to this processor because of the large bowl, hoping that all the products for the cake would fit in it.

Do you make muffin dough with knives or a disc?

It depends on what kind of dough. If thick, then with knives, if not very thick, then with a disk. Actually, more often with knives. I am afraid to spoil the harvester. Still, it is better to beat with a disc. In general, in secret, I often make cupcakes with my hands and don't whip anything too much. So, I will mix everything for baking. I rarely cook something special, but for the disposal of sour milk, manual mixing is quite suitable.
And I am too lazy to rub with my hands, I rub everything on the combine. Sometimes I rub with a margin. That is, not one carrot for soup, but 3-4 at once and onions the same way. And then freeze. Sometimes I make overcooking from everything grated at once, I freeze some of the already finished overcooking. Cheese for pasta is also rubbed with a margin. We need cheese for pasta, so I rub a lot at once. I use part of it immediately, and part of it I use ice cream. Well, in everything so. Not to bother with 1 thing or a small amount.

[Chamomile1]

Chamomile1, so I did the same - I quickly mixed everything into a simple cupcake, I just thought that it would be even easier with a combine. I'll wait for my order - I should come for the weekend. While I will read the pages of this topic. It's a pity that many photos are no longer displayed. I will look for a disk where you need to cut it, if I don’t figure it out, I’ll return to you with questions.

[Le_Nok]

Le_Nok, just then, after all, after kneading the cupcake, wash the bowl, lid and knife or disc. Here sometimes I knead in a simple bowl with my hands. It's easier to put it in the dishwasher.
My sister and I are fine with the disks. Scratches nothing. So, before you cut something, try using it. Maybe you will be fine.

[Chamomile1]

Chamomile1, about the disks, many in the subject reported that they were scratching the bowl. Maybe they fixed it in the last games and everything will really be fine, I hope.

Well, I already have Boshik. So far, I have only made muffin dough with knives in it. I'm amazed at the speed with which it happened. It took no more than a minute to knead. And a place was found for him in my small kitchen, to always be at hand. I thought about the ill-fated disc for a long time, wanted to use it at first, but did not dare. There is not a single burr on the disk, everything is smooth, I will try to insert a photo.


I understand, reading the topic, that if the disc scratches the bowl, it can be changed under warranty without any problems, nobody was denied? Who recently bought it, how are you doing with this disc?

[Le_Nok]

Le_Nok, I already wrote that my sister and I bought harvesters last year. I was in the spring, and my sister was given a birthday present in the fall. We're fine. Scratches nothing. We bought in different stores and we have a circle of different colors under the control lever. I have red, and my sister has gray. I don't know what it depends on. Possibly from the place of assembly.

[Chamomile1]

Chamomile1, yes, thanks, I saw your answer, just maybe someone else will come to Temka and write too. This I am all reinsured, maybe really in vain.

Girls, and by any chance no one has an extra box for nozzles from the bosch mcm 5540? I would buy. Maybe someone has a non-working harvester or just a box gets in the way, lies idle ....?

I came to cry. My harvester has broken plastic on which all attachments are put on. Just cracked in half. Now I don't know what to do. I'll have to try to repair it, I just have a bad idea how they will do it.
As a consolation, I can only say one thing to myself: "Thank you for taking the money."

[Chamomile1]

Chamomile1, Olga, are you talking about such a nozzle? 🔗 if so, you can buy it. And if about a pin in the middle of the bowl that sticks out, then only carry it for repair.

And I want to brag. Today, I was grinding cranberries on a cube on a propeller. There is no limit to my delight. So everything turned out great. The cake is dry. Jelly for jam is homogeneous and lush. Just a fairy tale. And on cubes she cut apples for jam, only had time to throw apples and empty the bowl, everything is so great. I will experiment further))))

[Marfusha5]

Marfusha5, no, not about that. It is that plastic thing that goes on the combine itself right after the metal pin. All the attachments are put on it. This is only for repairs and not a fact that they will help.

[Chamomile1]

Chamomile1, oh, what a pity .... Then yes. Only for repair. I wonder if they can somehow untwist the combine and attach a new pin in place? Let's hope this is possible. I will keep my fists for you.

I came to cry

Olya, look if this thing is broken 🔗, then it just changes, my husband changed it in 5 minutes, though the order went on for 3 weeks.

Olya, look if this thing is broken 🔗, then it just changes, my husband changed it in 5 minutes, though the order went on for 3 weeks.

I also broke such nonsense. The husband quickly put in a new one.

[Anchytka]

Anchytka, Ledka, oh, girls. Thank you very much for calming me down. It was this detail that broke.

How to turn a combine harvester into a potato peeler. Found here 🔗... If I am not mistaken, this is an invention of our Wasps.

The whisk disc is mounted upside down, water is poured into the bowl so that it slightly covers the disc. Add 8-9 small unwashed potatoes and peel for 40 seconds at low speed. In the photo combine Bosch 5540.

Link to video 🔗 and 🔗... And a warning.

Bosch 5540 cleans potatoes with an emulsifier disc from the combine 5529. It cleans well with water, but the foam pours out of the bowl - there is a real danger of drowning the combine's motor! In the future, I will finalize the design of the potato peeler.

Girls, where can you buy a cheap dice attachment? I want my sister to buy a separate Bosch 5540 and a separate nozzle with cubes. Can you please tell me, I can't find the attachment.

Girls, please tell me, can I cut raw beets on a cube cutter, or is it better not to risk it? And then the chopper does not take every beet from me.

cuts raw carrots and potatoes with a bang. pumpkin too. at the second speed (I have 2 speeds).

Thank you so much. I liked cutting the potatoes too. But I'm afraid to experiment with beets ...

Good afternoon everyone! Wandered into this forum and disappeared in this thread. Please help me put everything on the shelves.
Now I have a Braun Multiquick 5 harvester. But not everything in it suits him, and he is already for many years, then the sounds are not the same, then it stinks, then the knife flies ... I decided to send him to the dacha, and ask her husband for his birthday Bosch MCM 68885. In the new combine, in addition to the old functions of a grater, shredder, chopping, I hope to get the function of a normal mixer, including for milkshakes, dicing and a full blender. I really hope that from his bowl and blender the liquid will not flow over the edge with the lid closed - in the old one it kills. Maybe someone has dealt with both devices? Am I right that he can beat better than Brown's plastic paddles? I have never been able to get a normal foam in a cocktail with it, unlike a regular mixer.
For the rest, there are a few more questions about additional attachments and capabilities. I don’t understand at all, which series of attachments are compatible with MCM 68885?
1. The average grater, which is not there and everyone recommends it, is the Bosch MUZ-45 KP1 (or MUZ45KP1), right?
2. To what extent will a blender, which essentially mashed potatoes itself, replace the MUZ45RS1 raw vegetable grater? Do I understand correctly what she does exactly mashed potatoes?
3. Is the Bosch MUZ8KS1 parmesan and chocolate grater suitable for him? It is written that it is for MUM8, but the mount seems to be the same. And in the description of the other attachments, there is also not a word about MCM6 ... Will this attachment be replaced by the fine grater that comes with the kit or the same vegetable grater MUZ45RS1? Basically, I plan to use it specifically to crumble hard cheese.
4. I found three options for a citrus squeezer: Bosch MUZ8ZP1; Bosch MUZ-4 ZP1 and Bosch MUZ 5 ZP1. Again, I can't figure out if any of them will fit this harvester? If not, can you wear something else there? No juicer needed for other fruits / vegetables.
5. Can the included blender chop ice? Will it be able to make a cocktail with crushed ice or frozen strawberries? In the Philips blender, I did this without using a special L-shaped nozzle for ice picking, I did it with ordinary knives (although, in my opinion, the instructions also allowed this). I really want my favorite cocktail - frozen strawberries with champagne.
Thank you all in advance.

Owners of 5529, tell us about the berry press. Can it be used with hot vegetables (mashed potatoes) and how do the processor and blender bowls behave when in contact with boiling water?

[Nettle]

Nettle, I have a combine not very long ago, I mashed potatoes several times, rubbed it hot with a press, adding hot milk and a decoction from the pan. I did not notice any undesirable consequences for the combine. I won't say about the blender, I didn't grind hot stuff in it.

Good day! I bought julienne discs for my Boshik and for fries. But the fry disc has some irregularities around the edge. Here is a photo

Shown with arrows where the edge is slightly wavy.This is normal? I ordered it in the online store, did not notice it during examination, but discovered it the very next day.

Good evening! I would also like to know about the compatibility of the attachments of the MUM8 and MCM 68885, can anyone have seen them close or held them in their hands?

[Le_Nok]

Le_Nok, I have the same waves on two discs for fries. And from msm 5540 and in a separately purchased disc. So that's all right.

[Girls]

Girls, tell me, please, the bosch proficubix on the cube cutter seems to tear the sausage, it turns out not in cubes, but with torn edges. What am I doing wrong? I also tried it in the pulse mode, I cut it at 1 speed. Help with advice, please.