Ekaterina2
Marfusha5, I have normally boiled cuts. need to freeze a little
Marfusha5
Ekaterina2, Katyusha, for some reason. Thanks a lot for the advice, I'll try to freeze it.
Ekaterina2
Marfusha5, happened?
Marfusha5
Ekaterina2, Katyusha, I'll try to make a salad for Christmas. Until the hands reached.)
Le_Nok
Marfusha5, thanks for the answer. I already had time to test my disc for fries - it also cuts normally, but how quickly. I thought the harvester would "sausage" from these "waves". But it looks like this is his peculiarity, considering your two disks.

Girls, Happy Holidays and Happy Old New Year! Health, happiness, fulfillment of desires, and, of course, delicious culinary masterpieces
Angel_day
Help girls recently bought a combine 5529, I can not put the whisk disc on the nozzle holder. Along the way, the disc does not have enough thread to sit on the holder ... Or I don't understand anything at all ...
dopleta
Angel_day, are there oblique vertical marks inside the disc?
dopleta
Like these ones?

🔗
Angel_day
there are no such stripes, there is a rabbit on the knife, but there is no beater on the disc .... what to do ??
dopleta
To return! It's a marriage! After all, in this case, the disc is not attached, but dangles freely on the holder.
Angel_day
this is how it looks 🔗
Angel_day
and so
Angel_day
Angel_day
Quote: dopleta

To return! It's a marriage! After all, in this case, the disc is not attached, but dangles freely on the holder.

Return the whole harvester ?? or replace the disk? ..
dopleta
Wait, I can see grooves on the inner surface of the disc adapter ring that should sit on the lugs of the holder. Turn the disc slightly clockwise, lowering it without force, so that the tabs and notches line up.
Angel_day
as I just did not twist it uselessly, I have to go to the store, let them try to install
Nira
The ribs on the holder must line up with the slots on the disc
Bosch food processor - cuts into cubes!
dopleta
Have you confused the disc? I have a slightly different one. True, I bought it as soon as it appeared, perhaps you have a newer model. But your ring at the disk looks a little different - I see four slots in the ring from above - I have only two, and wider.

🔗
Nira
Yes, I think so too. I have two slits wide, like dopleta.
Angel_day
you have two wide slots, I have four narrow ones ... it does not fit in any way
Angel_day
Girls, I sent my husband to the store to change the disc, the disc was changed, thank God "! Now I will test
dopleta
So, after all, they invested from another model?
Ekaterina2
Angel_day, let everything be good with Boshik for many, many happy years
Nira
Angel_dayIt's good that you decided to try this attachment now and noticed that it doesn't fit. A little time has passed since the purchase. I'm glad for you that everything turned out so well.
Angel_day
Quote: dopleta

So, after all, they invested from another model?
I don’t know, in general they were thinking something there and decided to just change the disc, I myself think what kind of disc I got ... maybe it's a marriage after all ...
Girls now I'm scared to try a disc, they wrote I need to cut out the gasket from the rubber cover so as not to scratch the bowl ... Where to put it on the nozzle holder?
natalia1983
Hello everyone. Girls, can you please tell me what additional attachments you can buy for the Bosch MSM 552 combine, and will the Bosch MSM 5529 cutting attachment specifically fit it? And what else will do? And where can you get them?
kleoruru
Quote: Kalinka 777

I have a BOSH 68885 combine, it copes with all the declared functions perfectly. Grinds evenly. I did not whisk the cream with a whisk, I made a biscuit, it turned out well.Graters such as those of BOSH 5529 (I have it at my dacha). Good power, cute.
tell me, wiping from 5529 is suitable for 68885 ??? Help?
elenvass
kleoruru, Yes.
kleoruru
Quote: elenvass

kleoruru, Yes.

thank you .. this is cool ... but here's another look I found discs on the stand they sell, they will fit 68885 and are they needed?
Vladimir I
🔗 Can you please tell me this is solvable? It's just a shame that the money is lost, but I can't chop the meat
Vladimir I
Tell me how to insert a photo? I do not grind meat on this combine, it stuffs INSIDE and even squeezes the minced meat out, the review in the citylink to which the link was deleted because they did not like this review there
dopleta
Vladimir I, press the "edit" button above your message now, and you will see a red line "insert author's photo" will appear. Everything is clear there.
Anara
Hello people ! Help with advice, please! I had a long time ago MSM 5529, I ordered it from Moscow with delivery to Astana. In the very first days of operation, a flaw in the model with this blender lid was revealed. I had to hold it with my hand, until after a year of this "stop-crane" mode the control board flew. In the service center, of course, they counted the amount much more than half the cost of the combine with delivery. So he remained with me indifferent to everything in his cozy box. Somehow I decided to fit him an inexpensive relative in the form of 5525 (I will say right away that I purchased this device for the sake of a cube), but I was afraid of a second such dependent with the same design and possible cockroaches. And now, in fact, the essence of my appeal: people, I beg you, help. Answer the question, is my dicing accessory suitable for the Mcm 64051? The question is probably strange, but this is me, what if ... Someone ... Something like ...
Tanyush @ ka
Girls are cute, tell me which one is better to take a harvester. I choose Bosch MCM62020, Bosch MCM 64085 or MCM 68885, in principle I need it for whipping proteins, cream and cutting vegetables, I want to buy a good one and at a price affordable, tell me who has which one is better to choose?
Bijou
Last year I complained that I did not dare to rub the currants in the Cubic - it seemed that the output was too small. I was persuaded that I just took a small amount of berries. This year I obeyed and threw in all half a bucket of selected berries without tassels.)))

It turned out something strange - in fact, it's just juice. No, I understand that red currants mainly consist of skins and seeds, but that without them there will be only water left, it came as some surprise to me. The second day in the refrigerator, while gelling in any eye, only the foam bounced off with a cap. The foam in general prevented me from living - in the bowl only it was visible, it was after she left a bit and the syrup appeared.

Someone rubbed red currants in this way and what came of it? Or what have I done something like that?

Although the mashed potatoes in the "rub" just shine!
And to freeze a mountain of pumpkin into cubes in an instant is even cooler. Not every knife takes it.)))
NataliaVoronezh
Anara, if there is an opportunity in stores to try this cube cutter attachment live on the one you want to buy, then this will be an ideal option. And so, I ordered a rub from 5529 to my 68885, it sat perfectly.
Vladimir I
This is how my harvester works Bosch food processor - cuts into cubes! Bosch food processor - cuts into cubes! Everything goes inside.
Glada
girls, selling in Moscow MSM 5529. very little used. without box
I did not use a blender at all.
cost 4500.
write to the mail, please, if interested
glada dog yandex ru
madames
Hello everyone! Today is the second day with us Bosch 5529. Cool and fast cutting everything. Today I chopped everything for soup and went away for a minute, left her assistant to grate the beets alone. And in vain ... Beetroot jammed under the lid. And they pulled out the container from the spinner, but the top cover does not open, what to do, it sits poured. Well, how to take it off? Who was it like that help with advice. It seems like the lid is on a latch, and when you remove it from the device, it did not open for some reason. I'll go read the instructions, I didn't seem to see advice there in such a situation.
dopleta
Turn the lid over the bowl counterclockwise to align the arrows on the lid and bowl handle.
madames
Thank you very much!! How great, help came so quickly. Let's go to repair and work on. And this Boshik is just lovely! And where have I been before ?? Such joy in the kitchen.
milly02
Girls, I bought model 68885, I figured it out with grater-knives, I really like everything, but with a cube cutter I just can't assemble it correctly.
Where can you see? Maybe there is a video for the assembly?
NataliaVoronezh
Quote: milly02
Girls, I bought model 68885, I figured it out with grater-knives, I really like everything, but with a cube cutter I just can't assemble it correctly.
Where can you see? Maybe there is a video for the assembly?
Look, there is a risk on the rim, it must be combined. Just twist the nozzle, it will snap into place when the marks are aligned. I don't know if she explained it clearly.
Natt
Girls, good!
Reading the forum from the bushes, in a couple of months I became the owner of Kuzi and no less beautiful Boshik (I'm afraid to go into other topics, otherwise I really want a robot vacuum cleaner, and um).
In connection with the last question. I have a Mum 54251, but I really want a nozzle with a utility knife for it. Does a bowl with such a knife from earlier models fit the Mum 5? We have a lot of advertisements for the sale of earlier combines for spare parts, I would gladly take such a bowl, otherwise it costs so much in the service
Ateiya
Good evening! I read all your messages about the Cube and MWM 68885 ... And I decided to stay on the first option ... Tomorrow they will bring my charm. Now I obviously won't sleep well all night waiting for my miracle)))))
Bijou
Natt, and you rummage through the online stores of spare parts. Including the official Bosch website. The articles and model affiliation are always indicated there. Once upon a time I was looking for the compatibility of something there, that's why I remember.

And the direction is correct - I myself bought an incomplete 5525 in Yulmart for a thousand in the spring. For this money, I got another bowl with a lid, the very base with a motor, something else, and a set of trolleys. It turned out to be tanning, completely new, but clearly released a long time ago - the regression in the modern 5529 model is clearly visible - the old one has a completely different main shredder, better.
Natt
Quote: Bijou

Natt, and you rummage through the online stores of spare parts. Including the official Bosch website. The articles and model affiliation are always indicated there. Once upon a time I was looking for the compatibility of something there, that's why I remember.

And the direction is correct - I myself bought an incomplete 5525 in Yulmart for a thousand in the spring. For this money, I got another bowl with a lid, the very base with a motor, something else, and a set of trolleys. It turned out to be tanning, completely new, but clearly released a long time ago - the regression in the modern 5529 model is clearly visible - the old one has a completely different main shredder, better.
Officials usually write that they are suitable only for 1 series, because the older versions are cheaper, but you need to sell at a higher price.
So I'm interested, because on different sites you can find harvesters with idle motors, which with a bunch of attachments are much cheaper than one bowl from officials ...
Vitaly69
Quote: Seniyak
Good day!
Tell me please! I have a question: I bought an msm62020 harvester, I haven't tried it yet, but I thought it had a cube attachment. A very relevant attachment, albeit not urgent. If all models of this series differ only in the configuration and power, I understand correctly that the components can be mixed between them ??? That is, can I buy a juicer and an attachment for cubes and fine straws? And it doesn't matter that it's not for this model, but for 68?
The same story ... In the video on the MediaMarket website, it cuts into cubes, sellers from the store send for extra. nozzles in service. And on the service website about the cube cutter it is written "Suitable for harvesters MCM64 ... / 68 ... On MCM62 .. this nozzle does not fit !!!". Why it doesn't fit - they don't want to explain. In appearance, the bowls on these models are the same, the only difference is in power: MCM62 - 1000 W, MCM64 ... / 68 - 1200/1250 W. Who knows - tell me !?
More details: https://Mcooker-enn.tomathouse.com/in..._smf&topic=311888.new#new
svetn
Please, tell me, what is this nozzle for? Bosch food processor - cuts into cubes!
dopleta
For whipping.

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers