Bosch food processor - cuts into cubes!

Thank you!

It was?

Chef, thanks for the video! I have had a Bosch cube for more than 2 years, and I did not know how to cut the greens. It turns out - easy!

As I understand it, troubles with the model are already in the past? How can you distinguish the modified from the old one?
I ordered 5529 together with a medium Bosch MUZ 8 KP 1 grater for 5900r (5500 + 400). If in vain, dissuade urgently!

[Arkady _ru]

Arkady _ru , Congratulations on one of your most successful purchases! Let it serve for a long time - it will not disappoint you!

[Prus - 2]

Prus - 2, thanks, but so far only with one of the most successful orders, and even then not quite. Unfortunately, no medium grater was available. Combo only.

Well, it doesn't matter! Terochka, although the most popular, but you can survive a couple of days (until you find where to order)! I wish you success!

And I also congratulate everyone in the subject on the upcoming EASTER Holiday!

[Prus - 2]

Prus - 2how the Easter cakes are decorated! awesome beauty!

On the topic of cube cutters. My combine is already 3-4 years old, now it has begun to rumble very much (((Some kind of knock in the engine (

Good evening everyone! Almost ready to buy Bosch MCM 5529! The topic skipped as far as I could, but did not find the dimensions: height without a cocktail flask and a compartment with a pusher, width, depth. These indicators are very important for me! Thanks in advance for those who responded!

[diana7dg]

diana7dg, height without blender 20.5 cm, width 33.5 cm, depth 24 cm.

Larissa, thank you very much! Dimensions are just what you need!

Well, finally, the painful search for a real assistant ended with the acquisition of this device! Fitted ProfiKubiks into the interior just perfect! Naturally, a test drive on graters / shredders and cubes immediately passed.
The rest is ahead.
The first thing I encountered was that I got involved in pulling out the cube attachment! I bend two glands, then two more, and the first time and back stuck, just bend four fingers do not stretch! But somehow you need to take out the advertising paper from the inside! I have them so and so, well, they hold the yellow nozzle and that's it! Accidentally touched the grate and it easily pulled out, here you can already stick your fingers inside, but the glands do not allow the nozzle to be pulled out, since the tenth time I still took it out!
She pulled out a piece of paper, put it back together, on top to put on a gray knife, also fought with the latches-pieces of iron!
Won! Now I decided to chop the last carrot in the house into cubes! Instantly! Cubes in the bowl! I take off the lid, and there the carrots have hammered the whole grate !!!! Well, I think I'll quickly throw it out with a white pusher! Bummer! The pusher does not climb from one side or the other. As the monkey twisted it, the carrots got tightly stuck in a slice on top, the cubes stick out from below, the pusher is not inserted. I had to carefully drill holes from above with a clip, two were enough for the teeth of the grill cleaner to push the nasty carrot!
Then I cube two onions, zip, I don't have time to work with him as a pusher, I need to develop a skill! The bulbs almost jumped out.
Next on the test drive went thin and "thick" shredders. Potatoes and onions (unfortunately there were no cucumbers or tomatoes in the house, but I forgot about cabbage). I didn't have time to blink an eye, I liked the thickness. Because of my sluggishness, the young, small, light potatoes managed to peel in an instant while I inserted the pusher into the hole! I look and she is already white all naked!
Grater has tried everything. The one that with many small holes easily cut a piece of Lambert cheese into shavings, did an excellent job with raw beets (just for fun).A large grater cut raw beets into such interesting pieces, just like somewhere there were pictures of French fries with crescents, and these are slices with a hollow on one side. Mysterious form
I washed all the personal belongings very lightly, wiped them with paper towels, put them in their places and collected the cutter in a bowl. This time the iron clamps were already more obedient and did not resist me! The neck is wide enough, definitely larger than that of Vitek and Phillips blenders.
As a result, first impressions: the unit is amazing !!! Nimble ... bliiin, you need to learn to work with your hands faster, otherwise he will clean the chips from vegetables! I am wildly delighted and shocked!
I hid the onion slices in the refrigerator, they will come in handy. And I cooked different-sized vegetables in test quantities in a plastic bag in the microwave and added the dog to the rumen for dinner.
By the way, the carrot cubes have decreased in size after heat treatment, this is information for those who like to cut small salads.
Well, in the conclusion of the first review, what the husband said: "Why the heck bought a juicer, we have it!"

Well, in the conclusion of the first review, what the husband said: "Why the heck bought a juicer, we have it!"

Awesome ..))) And if you confuse a tractor with a small car, will he understand?

Congratulations on your purchase! I strongly suspect that it is time for me to want this.

[Bijou]

Bijou, thanks for the compliments! The tractor, I am sure, will distinguish it, because in his youth he worked on it.

I have a question about a knife in a blender, is this normal shape? In the instructions in the figure, the blades are located differently. Something I doubted ... one of the blades is horizontal, and in the figure two are down, two are directed up.
}

And my agony of choice ended with the purchase of 5529. I wanted to take and already ordered Redmond RFP-3904 for 4600r, since only graters / cube / shredder are needed (but in general I was thinking about 68885 and 64085 because of its greater compactness, but the price is not very - it suited it), but then I saw this one after a service repair for 2880r with a full guarantee and went to see what the reason was and where it was buried ... Everything works, the kit is complete, the repair was made for the end switch of the large cup cover, which is reflected in the document. At the same time I saw that I had chipped off 1 cm of a thin rib at the bottom of the blender container and asked to write it in with a seal. So now it's mine, just brought it recently and haven't tried it yet. But already glad ...
I ordered Bosch MUZ45AG1 wheels for julienne (448r), medium Bosch MUZ45KP1 grater / shredder (498r) and Bosch MUZ45PS1 for French fries (527r).

[Arkady _ru]

Arkady _ru, I also ordered Redmond 3904, in the evening they sent an SMS to pick it up, but I changed my mind at night. Until half past midnight, I sat reading the forum and reviews wherever possible. I realized that this one is more functional, you can buy attachments, the size is straight to the point!
Congratulations on your purchase!

Thank you! I already wrote above what I ordered.

[Arkady _ru]

Arkady _ru, and where did you order it and how is it - with delivery or can you come to pick it up?
And what is the shape of the knife in the blender? Can you take a picture?

[diana7dg]

is this normal form?

Normal, diana7dg! One horizontal, one up, two down.

[dopleta]

dopleta, thanks, reassured. It's just that I have vague doubts that my box has already been opened and maybe someone refused. Not all the parts had packing bags and the gray plastic of the blade with the cybercutter knives was in something oily ...

Knife in blender 2 down, one sideways, one up.
🔗
Here's another found St. Petersburg at a discount 5529 on packaging:
🔗
🔗
Is it worth taking another Bosch MUZ45RS1 for 347r? If it is for potato pancakes, then you can take it. In fact, the nozzles are not opaque, which are expensive, if in fact, sharp and made of good metal.

Disc grater MUZ45KP1 is it a medium grater? And the slot on it is a shredder, that is, is it double-sided? How many mm is the shredder?

In disc KR1 shredder 2mm

Today my Boshik passed test number two: a disc for beating, a knife, a citrus juicer and a propeller with a strainer (crushing) took part.
I went to the store and bought food for testing. The first test was a knife.He got large chunks of beef goulash, yesterday's sliced ​​and ringed onions and parsley. First I threw in the meat (I think, probably in vain, it is better to go ahead with onions and greens, because in the chopped meat some bundles of greens were wound up and not cut, but there were not many of them). I coped with the meat, I liked it, in any case, I will definitely use this function. The onion was mixed with the meat perfectly, and the greens in some places remained a bunch in the meat. I ground the parsley separately perfectly, although there was very little of it in the bowl.
The second number went to the juicer. I bought especially juicy orange and reddish oranges (for beauty of color). I squeezed out everything, there was an even skin! But I like juice without pulp, so I strain it. And so, there is a lot of pulp or I squeezed them too much (most likely the latter, I am not experienced in this matter) Juice with my son drank with pleasure!
Next, a disc for whipping. The product was cream "Prostokvashino" 20% and a little, in a trickle in a circle, added 33%. I didn’t beat it for a long time, I didn’t time it. First, the liquid splashed up to the top, and then dropped to half the bowl, and there was about 400 ml of it there. Whipped up so that I gasped! And so fast! For the first time in my life it happened. She took some of it with a spoon, added some syrup to the bowl and spun it some more. Yummy turned out !!!
The last test was the wiping tip. Only now I didn't know what to wipe on it ?! The victim was a tomato. I cut it in half, the first half slipped through with a whistle, the second got stuck under the blade, probably because nothing was falling from above. Does it also happen with potatoes? Does the latter remain under the blade? Or the tomato skin is to blame, although it got stuck with the skin up.
In total, all personal belongings coped with the task. It remains to test the blender, but next time!
Test products:

Wipe well the berries from the seeds with a wiper. Very good, for example, sea buckthorn! It's just a fairy tale!

Congratulations on a good and useful purchase! Let him serve faithfully for a long time!

And if the tomatoes are rubbed, first chop them with a large knife in a bowl (like meat), and then - into the rubbing! And mashed potatoes are a song! I can't do or eat any other way!

Mashed potatoes in the sense of a potato? Even I don’t want to mess with this helicopter and potatoes, but once I’ll try. Suddenly like it!

Yes, potato. And there is no special fuss - boil the potatoes, drain the water and immediately throw in the rubbing. Wipes very quickly! And then hot milk, stir in butter. Well, I also add an egg. If you're afraid of salmonellosis, wash it well with baking soda. Yes, and you will break - immediately into the potatoes, so that it does not come into contact with the outer shell. Such puree is airy1 And not snotty - it does not come into contact with metal.

You tell so deliciously that I will definitely try! Thank you!

Soak the wiping itself after work for 10 minutes in warm water, and then with a brush that goes to the combine - it will be washed off in a second! And the puree is super! Unsubscribe later!

Good evening! Today I tried to whip a milkshake in a blender and using a disc. The result is the same with both methods and is the same as whipping with a hand blender. But I did not do it according to the technology, the milk was not chilled. Great blender grinded banana and mixed with milk, it turned out thick and tasty, but the thickness of the banana. Milk is cooled in the freezer, I will try again.
And further! So far I have ordered only a disc for fries. In the store I picked up (where it was possible to choose from a tray in a bag) potatoes of the required size and diameter. I cleaned the houses and cut the butts like an eggplant and adjusted them to the size of the feeding hole. I show everything that happened.
These are the potato trimmings around the edges:


This is the bulk:




These are the trims:


Original:


Well, the finished product:


I was quite expecting such a result and am happy! I get the same potato when cutting by hand, but with less energy consumption. It's more pleasant for me to wash the combine than to cut the potatoes with a knife.I saw a cutter for 10 mm blocks in Burner's advertisement, but I did not come across a sale and I am not sure that the cutting will be thicker. In general, the disk for French fries will work for me, we will learn to cut beautifully and gently fry!

[Arkady _ru]

Arkady _ru, thanks for the link to the site, there I bought a disc for fries. Then I thought about it and ordered two more: a medium grater and for pancakes.

Here! These 2 discs are the most popular! Regarding the disc for potato pancakes - in addition to pancakes, we make mashed potatoes from tough fruits and vegetables. Well, the middle one is the most popular!

This is the bulk:

So, of course, we don't buy such a nozzle ... I will cut it by hand and quickly, I have a suitable knife.

On the scales there are corollas at 68 and a grater for berries at 55 ... And where to go?

Still, the grater slightly outweighs. The beater may be in a different place (all the more, I have a simple mixer), but I wanted to test the grater. Girls, how is mashed potatoes done? By her? Just push potatoes there with a pusher and that's it, mashed potatoes at the exit? And there’s no stirrer, what’s right in the bowl and bring all this to mind? Somewhere I saw such rotating frames for mixing, but definitely not here.

Is five and a half for 5529 expensive or normal?

The cheapest 5240rub.

You just shove the potatoes and that's it. I immediately add milk there and throw in pieces of butter. First, a few potatoes, then butter, milk, then again potatoes, then again milk and butter. I like it this way more and try not to interfere with the potatoes after rubbing, they are more airy, if not mixed. Maybe I just think so, I don't know.

The cheapest 5240rub.

For that kind of money, I only found it at a markdown in a neighboring town.

You just shove the potatoes and that's it.

Wow cool! And you can, probably, throw butter into a pot with a whole potato, smash it with a spoon that you took the milk, splash the milk and stuff this mess into the com6ain ... But that's so, fantasies for now. Dreams ... There, along the way, 6 will be seen.

If I cook in a pressure cooker, then I immediately add milk to the potatoes, and I don't pour a lot of liquid, only as much as is needed later in mashed potatoes. And if I boiled it on the stove in water, then I did not drain the broth, but immediately took it out with a hot spoon and into the combine, even if the liquid gets into it, it only tastes better.

People are good, I read and read for half a day, my head is already porridge. I even got to the explosive schemes, and still there are several questions to consolidate the material:

1. Is the insert-ku6ik from this thing suitable for 5 MUM in MSM 55 (30)? Their lower part has the same number, and the upper part with knives is different. Plus, the seats may vary, and that's what I'm afraid.


On MSM 6 ** did not fit in humans, but like 6s they differ from MCM 5?

2. Do I lose a lot of useful attachments when I buy MCM 5530 (except for the Ku6ik, of course)? That I got the hooks for the dough and the whisk somehow learned.))

Just since yesterday, 29 has risen in price, and 30 has fallen in price. So I thought that if you collect this Tetris for spare parts, it might turn out to be more useful and almost cheaper. Provided that the Ku6ik attachment can be removed from this picture, of course.

I saw this:

Sasha, the cube does not sit on MUMs, only on MSM, I don’t know how on 4, but on MCM5530

Is it true the other way around - that a cu6ik from Mumov does not sit on MCM?

I have a question about milkshakes, I did not notice this information in the instructions. How long can you whip a cocktail in a blender, and how long does it usually take?

Beat the cocktail with big-big foam for 3 minutes. at 2 speeds. Less is possible, but I like the foam very much

ABOUT! I was afraid to twist for a long time, now I will be bolder!
In general, does the motor have any time limitations? For example, the Redmond 3904 combine has 1 minute of work and rest. And this one?

[sazalexter]

It seems like nothing has been written about restrictions. Ask a question in the topic about MUM 5 sazalexter, he knows everything very well about all the equipment, and about combines - including BOSCH! Well, share with us!

[sazalexter]

Thanks for the hint to whom to contact and thanks to our technical guru sazalexter for answer! And the answer was: "If the time is not specified in the instructions, it is not limited, there is ventilation and protection."

Just today I took 4 discs. Made in Slovenia. Sharpening for count. I won't go to change, I'll fix it myself.

[Arkady _ru]

Arkady _ru, stupid or what?

Yes, not quite the point. Not as stupid as those of the MYSTERY MMC-1401 electric grater (twin of Clatronic ME 3484 and MAXWELL MW1303), in which only shredders have chiselled cones (do-it-yourself graters). Sharpening is everywhere, but in some places it is partially sharpened and far from being as sharply sharpened as, for example, discs (2 pieces of different caliber) for a grater and shredder at the Borner 3610156 rotary grater, on which I almost cut my finger. In the latter, the sharpening is not noticeable, since from below. And it's good that I didn't try with my finger, something stopped me ... Bosch discs have a sharpening on top.

[Arkady _ru]

Arkady _ru, perfectly cuts everything with such a sharpening as it is - and fingers during washing are whole!

[Prus - 2]

Prus - 2, what does cut is not surprising. The combo is more powerful than Mystery, you can push it a little. Nobody cuts with knives when washing. I remember that my daughter was still quite small, I specially showed her how to wash a knife (with a periodic reminder). Now it has grown, there is no need to remind and examine)) The disks that came with the combo are made of better quality.

[Arkady _ru]

Arkady _ru, and how and on what will you sharpen? I would like the knives on a universal chopper from a blender to be sharper.