Blender

I want to buy a blender and the choice fell on Vitek VT-1477 and Braun Multiquick MR 550 Buffet. which one will be more reliable and better? both have breakdowns in the reviews.

Is it my glitches? Or at my computer? Why does everyone in the picture see a blender and I see a strawberry cake?

Girls, this is my cake))) so I gave it)) I uploaded a photo of the blender, but why the cake appeared I don't know)))

Yes, I was surprised in the morning - why no one reacted in any way to such a novelty

I fixed everything)) this forum glitched)) now there is Phillips)

Well, here's Man, today it's my turn to cut my fingers with Vitkoy boliiiit

Oh, yes)) I already wash it neatly)) he is sharp)) but the sponge is all cut)

I want to buy a blender and the choice fell on Vitek VT-1477 and Braun Multiquick MR 550 Buffet. which one will be more reliable and better? both have breakdowns in the reviews.

honestly, I do not advise Vityok. Better any other company, even if it is cheap, but not him. Faced the fact that in a month two breakdowns. Arriving at the service center, they looked at me like an idiot. Like what you want, this is Vityok (she began to call it that, like the master in the service), and with the details of the problem, and they say, in general ... Better take Brown. Higher quality. Although, who likes that.

I am also for Brown !!!

I want to buy a blender and the choice fell on Vitek VT-1477 and Braun Multiquick MR 550 Buffet. which one will be more reliable and better? both have breakdowns in the reviews.

I have Vitek 1480, I took it exclusively for the sake of cubes, although there are many different graters-attachments and grinders in the set. So I don't really like the leg in the kit. And the fasteners are too weak and very easy to unfasten, and it heats up quickly enough ... That is, beat something or make mayonnaise, then it heats up noticeably. Everything is fine during cutting and grating.

no, well, honestly, now this pen is only on the trash can. Or buy a new pen separately. Either there is some kind of sleeve, or something else ...

I have Vitek 1480, I took it exclusively for the sake of cubes, although there are many different graters-attachments and grinders in the set. So I don't really like the leg in the kit. And the fasteners are too weak and very easy to unfasten, and it heats up quickly enough ... That is, beat something or make mayonnaise, then it heats up noticeably. Everything is fine during cutting and grating.

that's exactly what I'm talking about ...

So I bought, more precisely, while I paid for the blender. On this site, for some reason, they called him a mixer.
blender mixer 2339 RUB
/]

I was looking for a powerful blender, but here they are already using it. : drinks: How is he? Did you like it? soundly made? In our online stores, prices range from 4600 (but not available) to 7600 and beyond. Something a little expensive. I want to buy something to buy. that there was nothing to complain about.

[Olya]

I was looking for a powerful blender, but here they are already using it. : drinks: How is he? Did you like it? soundly made? In our online stores, prices range from 4600 (but not available) to 7600 and beyond. Something a little expensive. I want to buy something to buy. that there was nothing to complain about.

Olya, just saw your post, I answer.
Not entirely happy. Powerful, well made, still German quality of workmanship, grinds well, but only 400 grams of bookmarks, or first load a little, and then add. I wanted one so that you could load a full bowl, turn it on and he grinds everything.
This was my last blender in an old Polaris Yultima combine
For the price that I bought 2339, you can buy. Not worth more. Although I will have to do it properly later, I was offended by him that he was not the same as I wanted and after 4-5 experiments, I did not take on him.

At first, my blender was idle with a glass, my foot was more comfortable and faster. But to make a mixture and cocktails for ice cream - he has no equal, he threw it himself, without you whipping. And the crap from 10kg of tomato in a few minutes rubbed me - it's just some kind of fantasy. I have a cashew shredder for small portsayk, for larger ones I already use a glass. He is not idle, just expect more from him than he might not be worth.

At first, my blender was idle with a glass, my foot was more comfortable and faster. But to make a mixture and cocktails for ice cream - he has no equal, he threw it himself, without you whipping. And the crap from 10kg of tomato in a few minutes rubbed me - it's just some kind of fantasy. I have a cashew shredder for small portsayk, for larger ones I already use a glass. He is not idle, just expect more from him than he might not be worth.

Sveta, do you have the same blender as mine?
If yes, then in more detail about 10 kg of tomato. Maybe I'm not taking into account something, I feel that I'm roaring like an animal and there will be much more power, but why doesn't it scroll with a full glass?

I have a phillips - in my technique it is on the list. And I laid the crap - horseradish, garlic, tomatoes cut into quarters and scrolled on the turbo. How many bookmarks I made - I don't remember, it was in the fall, but it all happened quickly as never before, just playing.
And it does not scroll because the knife stops at the bottom - you need to try to start with minimum revolutions and then add them.

[Lyi]

Lyi, Did you order from the site that followed the link? Normal shop? I looked after something, and the delivery is not exorbitant money. Does this blender have an ice pick container?

[Olya]

Olya, just saw your post, I answer.
Not entirely happy. Powerful, well made, still German quality of workmanship, grinds well, but only 400 grams of bookmarks, or first load a little, and then add. I wanted one so that you could load a full bowl, turn it on and he grinds everything.
What a pity? I think 400 grams is not enough, we have to look further now. I don't know what to look at now. there is also such a Stadler Form SFB.700 Blender Two, but it is 2 times weaker in power.

[Lyi]

Lyi, Did you order from the site that followed the link? Normal shop? I looked after something, and the delivery is not exorbitant money. Does this blender have an ice pick container?

shoko11!Yes, I ordered from the site using the specified link.
The store is wonderful, the packaging is of the highest class. And also fat pluses in this store. Delivery of one device costs 26.55 EUR, but if you collect a lot of goods, then the delivery increases very slightly. So I in this store ordered 2 parcels of 20 kg each and in both cases the delivery did not exceed 30 euros for each, that is, 1200 rubles.
There is a good freezer ice cream maker, which costs 5.5 thousand rubles, and in our stores it is 15 thousand rubles, the same applies to vacuum packers, and there is packaging in cellophane and in foil and in jars. The price ratio here and there is about 3: 1, that is, 3 times cheaper.
So check out other products as well.
And then all these goods are not Chinese, at least those that I bought, but of German quality, made in Germany.
So think about whether it makes sense to buy goods on Chinese sites or our Russian, but Chinese-made, if there are similar goods of German quality.
Delivery, of course, is slow, but this is already the fault of our post office and customs.
There is an ice pick in the blender.
Maybe in vain I hau this blender, I still need to work out with it and try different options, turbo first and others.

Thank you very much for such a detailed answer. I recently ordered a 3-in-1 Efbe waffle iron from Amazon through an intermediary, it would be cheaper here and to the post office near the house. And what kind of ice cream (firm) do you mean?

And Vmitka 1480 is quite enough for me ... the cubes are normal ... the graters are normal ... only that the fries are finely cut as for me ... I'm happy with the chopper ... milk-banana cocktails, strawberry kefiro makes in seconds ... a whisk too not bad ... making them pancake dough and waffle dough ...I made mayonnaise with my foot ... a lot of mustard powder dalla ak that I didn’t like it .. I didn’t dare to make a new one ... the potato grinder does not crumple badly ...

In Technopolis on the stock Blender Bosch MSM67PE. Price-499gr.



Characteristic:

Manufacturer Bosch
Blender type
Power, W 750
View (stationary, manual) manual
Number of speeds 1
Turbo mode is
Number of functions 5
Number of attachments 4
Stainless steel nozzle material steel
Bowl material plastic
Bowl total / working volume, l or kg no
Blender (for food processors) no
Blender capacity, l (for food processors) no
There is a universal shredder
Blender type (wired, cordless) wired
Anthracite color
Functions
Whipping is
Dough kneading no
Mixing (shaker) yes
Grinding is
Auger grinding (auger meat grinder) no
No grater
Shredder no
Juicer no
Citrus press no
Press for berries and boiled vegetables no
Mashed potatoes no
There is no mill
There is ice pick

And Vmitka 1480 is quite enough for me ... the cubes are normal ... the graters are normal ... only that the fries are finely cut as for me ... I'm happy with the chopper ... milk-banana cocktails, strawberry kefiro makes in seconds ... a whisk too not bad ... I make them dough for pancakes and for waffles ... I made mayonnaise with my foot ... I didn't like a lot of mustard powder dalla ... I didn't dare to make a new one ... the potato maker doesn't wrinkle badly ...

Please tell me how long have you been using it? It is very tempting, so I was on fire to buy, but the reviews are 50/50. Moreover, everyone likes what it does, but half of it breaks down very quickly ... on average 4-6 months. And so you want
Girls, who else uses Vitek 1480 - how do you, after a while?

Please tell me how long have you been using it? It is very tempting, so I was on fire to buy, but the reviews are 50/50. Moreover, everyone likes what it does, but half of it breaks down very quickly ... on average 4-6 months. And so you want
Girls, who else uses Vitek 1480 - how do you, after a while?

Review in an adjacent branch https://Mcooker-enn.tomathouse.com/in...571.0

And Vmitka 1480 is quite enough for me ... the cubes are normal ... the graters are normal ... only that the fries are finely cut as for me ... I'm happy with the chopper ... milk-banana cocktails, strawberry kefiro makes in seconds ... a whisk too not bad ... I make them dough for pancakes and for waffles ... I made mayonnaise with my foot ... I didn't like a lot of mustard powder dalla ... I didn't dare to make a new one ... the potato maker doesn't wrinkle badly ...

with mustard powder, mayonnaise is not very tasty ... better with ready-made mustard .... and after tasting the mayonnaise with a blender .. only I do it myself ... I don't buy ready-made mayonnaise at all ..

Please write your impressions about Vitek 1480, the above branch does not open, but I want to know the opinion!

Impressions - lack of evil Vitek 1467 turns out to be a blender only for indoor vegetables. I tried to chop raw carrots into cubes, got stuck, barely pulled out, now I decided to chop cabbage for borscht, t
I'm so stuck that I can't get it out now. By the way, only raw potatoes are chopped. I still have a Boshik, with
the equal turns out to be a double blade on the bosha, and on one side of the thread there is plastic and therefore he chops only boiled vegetables, one asks why he is so needed. What a stupid company, nafik such a g to release and advertise. By the way myself. the cube attachment is also difficult to insert and remove from the bowl. https://Mcooker-enn.tomathouse.com/index.php@ option = com_smf & Itemid = 218 & topic = 22571.0

Most likely in 1480 and 1467 the cube cutter is the same.
On good terms, it was necessary to write on the packaging only for boiled vegetables!

I still can't get the cube attachment out of the blender bowl since yesterday. And so and so I twist and twirl and still nothing, already the pieces of boiled carrots inside are beginning to go out. Tell me what to do, pliiz!

Tell me what to do, pliiz!

In 1985, my motorcycle engine jammed so that I could not open it for repair. Precisely because of what is jammed. I had to buy a new engine.(450 rubles of the USSR, more than two of my monthly salaries). And the old one is still in the motorcycle garage.

Waiting ... for my great-grandchildren, probably ...

Finally it turned out to pull out this nozzle. I decided at my own peril and risk to make efforts and pull with force, although I knew what could lead to physical damage. But surprisingly nothing broke. In general, the quality of plastic, and in terms of tactile sensations, initially Vitka seemed to be as good as more eminent brands. It turns out there is a trick with the installation of this nozzle, which is not indicated in the instructions, now I finished it after tormenting him. Nevertheless, I think that the blender should provide that if you insert the attachment incorrectly, then it should not turn on, like with other companies. I did not experiment with cubes on this, except for mayonnaise with a submersible nozzle. While the flight is normal, but already plagued by vague doubts judging by the reviews that he will not live long.

Girls, I need advice. You need to buy a blender within 300 UAH. But there should be graters and a minced meat knife. Here I stopped at two. What do you recommend? Blender Saturn ST FP 0042 or Blender set DELFA DEK-4500. Often they will not use it, so sometimes a chicken in minced meat and carrots and of course they will whip something there.

[Nadyush,]

Nadyush, maybe Deh? There are 3 models, here is the last one, just what you want! They are guaranteed for 2 years. Ah-ah-ah, the price there is a little more ... But, just in case, look at the "Rosette".

Naaad so tyzh yesterday already decided which one to take

Yes, I have a blender. This is me in addition to the gift !!!!

Help with choosing a blender. I am thinking of purchasing such a Braun MR 6550 MCA It seems that there are a lot of nozzles, and Braun, but only they are all kind and with nozzles and companies are good, how to choose the right one. I am not a culinary master, but I like to bake, often it is necessary to beat something. In general, I will be very grateful for the advice

Help with choosing a blender. I am thinking of purchasing such a Braun MR 6550 MCA It seems that there are a lot of nozzles, and Braun, but only they are all kind and with nozzles and companies are good, how to choose the right one. I am not a culinary master, but I like to bake, often it is necessary to beat something. In general, I will be very grateful for the advice

Good blender, take it boldly.

Help with choosing a blender. I am thinking of purchasing such a Braun MR 6550 MCA It seems that there are a lot of nozzles, and Braun, but only they are all kind and with nozzles and companies are good, how to choose the right one. I am not a culinary master, but I like to bake, often it is necessary to beat something. In general, I will be very grateful for the advice

I have one. I am 100% satisfied with it. Take it boldly!

I have had a Braun 555 for 15 years. An excellent blender, now, in my opinion, this particular model is not produced. I am overjoyed with them, the quality is high.

Girls, today on the Groupon, the Kitchen Aid hand blender in four colors (red, black, beige and silver) is sold at a discount of 2 thousand rubles for 5590 rubles!

Girls, I need advice. You need to buy a blender within 300 UAH. But there should be graters and a minced meat knife. Here I stopped at two. What do you recommend? Blender Saturn ST FP 0042 or Blender set DELFA DEK-4500. Often they will not use it, so sometimes a chicken in minced meat and carrots and of course they will whip something there.

Nadyush, I liked the Saturn ST FP 0042. And the reviews about him on the Rosette are not bad. I had Orion-11 in general, plowed for 4 years almost every day. The knife is still sharp. But something in the engine flashed (I think the fuse has blown) and he is temporarily on vacation (until I catch an electrician at work).

Nadyush, I liked the Saturn ST FP 0042. And the reviews about him on the Rosette are not bad. I had Orion-11 in general, plowed for 4 years almost every day. The knife is still sharp. But something in the engine flashed (I think the fuse has blown) and he is temporarily on vacation (until I catch an electrician at work).

We already bought it, thanks. I took it exactly. True, they haven't given it yet, it so happened that the trip is postponed ...

[800]

There's a blender in Epicenter. Power 800 and two knives, seen in the photo. The cost is only 299gr.

Bragging
Bought a kitchen aid shredder. I have two mixers, a bamix blender, and no chopper. Here is my purchase Food Chopper (Chopper) 2 Speed, 5KFC3515ER, KitchenAid


I really like the work of the grinder, it does everything in literally seconds and very smoothly. Today I baked a cookie, ground pistachios in 10-15 seconds, walnuts even faster. These are ground pistachios


So far, everything is fine.

Dear ladies and gentlemen ,,,,,,, urgent business can you tell me if this grinder can make me flour from almonds. Dear owner about the miracle of the machine, let's experiment with almonds. you really need to know.

Dear ladies and gentlemen ,,,,,,, urgent business can you tell me if this grinder can make me flour from almonds. Dear owner about the miracle of the machine, let's experiment with almonds. you really need to know.

It will not grind at all into flour, but it will grind very finely

It will not grind at all into flour, but it will grind very finely

an old coffee grinder grinds. but taking into account the load of only 30-40 grams with sugar. won't he take it !? you have to try, it will be cool, if he can. to try the same with sugar one to 1. 150 grams of each product. damn it would be a whole victory, who has such, let's try it! uraaaa

an old coffee grinder grinds. but taking into account the load of only 30-40 grams with sugar. won't he take it !? you have to try, it will be cool, if he can. to try the same with sugar one to 1. 150 grams of each product. damn it would be a whole victory, who has such, let's try it! uraaaa

Grinding in a coffee grinder (which is not recommended) produces unwanted oil, grinding in a grinder with sugar will produce better results. Try Me for baking dacquoise biscuit, I grind it with a blender

Grinding in a coffee grinder (which is not recommended) produces unwanted oil, grinding in a grinder with sugar will produce better results. Try Me for baking dacquoise biscuit, I grind it with a blender

Elena, if the almonds gave butter in the coffee grinder (at least a drop), I would not have made flour. You are right, he will give oil if you keep it in the coffee grinder for 10 seconds or more. but if in short pulses of 3-4 seconds and with sugar, then everything is ok. the flour turns out excellent, but it takes too long to mess around (grind 20 grams each way) there is such a professional equipment called a robot cupe. costs from 50 to a million. it is dedicated for this business assembly. (cutters and grinders) the minimum speed for flour to turn out is 3000 rpm - and that's when I ran into a kichen aid grinder and saw that it had a speed of 3500 (I think there is every chance) you need to try

Our forum member with the nickname ceth has a kitchen idovsky grinder.

how can I contact her? how to write to her?

Her messages are a couple of pages ago, right here https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=138.2160 , click on the green scroll under her profile and write messages in a personal.

I came home from vacation, so with a delay, although the answer will not please, the fact is that I did not try to make flour. If the question is still relevant, you can try. True, for this you need to buy at least almonds and come up with something to bake

My beloved, vaunted, coveted Vitek-1480 died in six months
And I, the snake, praised him. : girl_red: Here's a damn reducer. If it were not for him, Vitek would not be a blender, but a dream. We gave it to the service-spare parts, we made an act, I will try to return it. Girls, I feel sorry for him. That's what kind of company this is, everything is good and wonderful, but there is a fly in the ointment. I bought a hairdryer, it works like a clock for 4 years, but in my favorite nozzle the bolt is constantly unscrewed and the nozzle falls out. The iron is the same story, periodically, once a year, 5 drops of brown liquid flow out of the water tank and no one will guess where it will get (on black trousers or a white shirt). And the blender is in the same place - the engine is running, the knives and graters are sharp, comfortable, functional, but normal gears could not be inserted into the gearbox.