Food processor Bosch MUM 5 ...

[sveta-Lana]

sveta-Lana, Svetlana, if you have a citylink, then take a look there. Payment also upon receipt.

[Tanya-Fanya]

Tanya-Fanya, Tanya, there is a citylink, but they don't have mump1000

WildBerry has a Bosch MUMP1000 for 4013 rubles.

as well as pasta dough, like any cool dough, it is optimal to cook with knives in a food processor

At Ozone, the Bosch MUZ5MM1 multi-mixer is now on sale with a discount and a promotional code for 2049r.
Relatively normal price practically for nothing.

MUZ5MM1 fits MUM4, MUM5, MUM6, MUM8 and MaxxiMUM machines.

Making dough for dumplings with knives in seconds.

MUZ5MM1 fits MUM4 machines,

Please tell me, is it tested in practice? According to the instructions, this attachment only fits mum5.
I have mum4, that's why I'm trying to find out.

Yes, in practice. There was an opportunity to try on both MUM4 and MUM5.

The only difference is that the MUZ5MM1 has a magnet in the attachment point and without a complete assembly of the multi-mixer the MUM5 motor will not turn on, this magnet is not needed in MUM4, MUM8, MaxxiMUM, therefore it is suitable for them.

MUZ4MM * and MUZ8MM * are both without magnets and differ only in the color of the gearbox and fit MUM4, MUM8, MaxxiMUM, except MUM5. (On MUM5 they will stand up normally, but the motor will not turn on, but you can glue the magnet and it will also work)

In general, MUZ5MM1 is the most versatile, suitable for everyone.
These multi-mixers fit on the blender socket, which is the same for the MUM series.

The same slot is used for the MUZ45XTM1 shredder, which even on the packaging indicates compatibility with MUM4, MUM5, MUM8, MUMX.



If there is an idea to acquire this multi-mixer for both MUM5 and other MUMs, then you should do it now, the price will hardly ever be lower. (Promotion until 31.01.2020).

[Cacktus]

Cacktus, many thanks for the detailed answer!

Girls, and I have a sadness 2 months before the end of the warranty period, a black liquid flowed (I suspect that it was grease) from the hole where the nozzles are inserted. I called Ozon, explained the situation (thanks to Sveta-Svetlenka for telling me where to call), the operator said that I needed to contact the service center. Of course, I explained that there is no service center in our city. Then the operator said that the combine would be brought to the Ozone pick-up point and issued a return, which I did today. The money was returned within 15 minutes to the personal account of Ozone. I had MUM5.

If drops of this grease come out, then this is normal, this happens when the motor and gearbox are heated.
This lubricant just needs to be wiped off with a napkin and not bathed.
There are also traces of grease on the nest for whisk and meat grinder.
You have it practically new, apparently there was no significant load before.
And then it warmed up and the excess lubricant flowed out.

There were no drops. It flowed in a thin stream. And before that, the combine began to growl at all speeds in two weeks.
But I already handed it over under warranty.
I just realized that Bosch was very weak for my needs. I bake very often, so the harvester was in use almost every other day.

So he began to growl, this is bad, and the grease is leaking from Bosches and from MUM5, and from Boshevsky blenders.
It seems that the type of lubricant has been changed, this was not the case before, but it is often found on new ones.

Hello, tell me, blenders for mum 5 should also have this magnet ?? I just have a mum 5 and it is not on the blender. I want to buy a multi-mixer attachment and I'm worried that it won't work if I have a magnet

On Ozone, the Bosch MUZ5MM1 multi-mixer is now on sale with a discount and a promotional code for 2049r

Please tell me a promo code !!

Hello, you need to activate an additional discount by clicking on the lilac BOSCHNY promotion icon. I already purchased goods, maybe I don't really need it, but for that kind of money, you can indulge in it.
I have a mum of 5, everything works, you just need to install it already fully assembled.

The 5 series blender has a magnet in the handle inside the bottom.

So do you also have a magnet on the blender ??

The 5 series blender has a magnet in the handle inside the bottom.

Can't I find this magnet on my own ?!

Yes, it's in the blender handle, inside.

When you insert the blender lid and turn it into the groove, carefully look into the blender handle)

Here is a photo



Photo can not upload

When you insert the blender lid and turn it into the groove, carefully look into the blender handle)

Ah, I'll look then!

I don't see the photo.

Good luck.

The main thing is that everything works.

Here is my blender, I haven't found a magnet yet

Hello, tell me, blenders for mum 5 should also have this magnet ??

MUM5 differs from other MUMs in that it has a sensor (reed switch) in the blender socket.
Without a magnet in the attachment (blender, multi-mixer, TastyMoments chopper), the motor will not start.
The motor will not turn on even if this connector is not covered with a protective cover, it also has a magnet.

🔗

I want to buy a multi-mixer attachment and I am worried that it will not work if there is

On the contrary, those nozzles that are with a magnet fit all MUMs (4,5,6,8, X)
And to MUM5 only with a magnet.

Here is my blender, I haven't found a magnet yet

Here is a photo of the base of the MUZ5MX1 blender, where the magnet is visible.

🔗

Here is a photo of the base of the MUZ5MX1 blender, where the magnet is visible.
🔗...03198_1540788_2946546 .jpg

It's just that I definitely don't have a magnet in the blender, I was twisting it like that, and that way, the handle is transparent and hollow on both sides, there is definitely no magnet inside the handle! But if you say that muses 5 is suitable for everyone, let's hope that it will suit mine too

Just now I got to the combine. Indeed the magnet is at the bottom, not in the handle. The handle contains a mechanism that is connected with a magnet. I have a 54251 mum, a multi-mixer came up.

let's hope that it will suit mine too

What kind of MUM5 do you have?
It's strange that there is no magnet.
Maybe they simplified it a little and did it like the rest of the MUMs.

Just now I got to the combine. Indeed the magnet is at the bottom, not in the handle. The handle contains a mechanism that is connected with a magnet. I have a 54251 mum, a multi-mixer came up.

Strange, so why don't I have any magnet ??? !! I have a mum 58364

[Frosya Burlakova]

Frosya Burlakova, rejoice, whether you have a magnet on the attachments deeply purple or not ...

From the advantages of your situation, I see that the MUZ4MX2 blender will suit you.
It is collapsible and its base and bottom can be removed with knives, the cover is soft.
I like it better.

Frosya Burlakova, rejoice, do you have a deep purple magnet on the attachments or not ...

This is good, because we have already ordered a muz 5 multi-mixer, I hope that will fit)
And what is the advantage of the collapsible blender, I don’t understand something?

This is good, because we have already ordered a muz 5 multi-mixer, I hope that will fit)

This one fits everywhere.

And what is the advantage of the collapsible blender, I don’t understand something?

easier to wash and easier to get a thick yum.



The new MUM5s now all come without magnetic sensors on the blender connector.
Today I saw a new MUM58252RU - there are no magnets either in the stub or in the blender.

In short, now an ambush for owners of old MUM5 with a magnetic sensor for closing the nozzle,
you need to monitor the presence of magnets on the purchased attachments for the blender connector.

But all blenders, grinders, multi-mixers are becoming compatible.

[Cacktus]

Cacktus, please tell me about the muz5cc1. Does it fit mum4?

please tell me about the dice cutter muz5cc1. Does it fit mum4?

No! MUZ5CC1 and CC2 will not work with MUM4.

So I was left without a "cube" attachment? And I will have to make cubes with pens, pens, pens

Thanks for the quick response

[Cacktus]

Share your experience for those who use muz5mm1 or muz4mm3. Thanks to Cacktus, I realized that this is one and also a nozzle (knife +3 graters). Also a question for those who use the muz5vl1 vegetarian attachment - 5 grains.

Which attachment do you like best?
And is muz5vl1 suitable for mum4?

[Tanya-Fanya]

Tanya-Fanya, I have a mum4 with a similar one. Rather, the vegetable cutter came with three graters, I separately bought a disc grater + shredder. In the photo she is at the bottom left

And is muz5vl1 suitable for mum4?

No, it doesn't fit. The body of this vegetable cutter is different.
But the cutting discs are the same and fit.
In general, MUM4 usually comes with this vegetable cutter with three discs, while other discs can be purchased separately.
For MUM4, MUZ4DS3, ... DS1, ... DS4 are suitable, it has 3 disks in the kit. DS4 should have a transparent cover.

Which attachment do you like best?

Three discs with a multi-mixer duplicate the capabilities of three discs with universal cutting.
But discs from a multi-mixer are not interchangeable with discs from universal cutting.
The seats on the disks are different.
A multi-mixer with these discs is more convenient for small volumes.
For seasonal workpieces or large batches, versatile cutting becomes more convenient.
But, for universal cutting, the choice of discs is larger, and the multimixer without options has only 3 types.

Girls who have MUM4, 600W is enough for making marshmallows? Or the mixer will die under such loads.

[Dunyaz]

Dunyaz, I have MUM4, but I have never made marshmallows.

[Dunyaz]

Dunyaz, not all mum with the first digit 4 have a power of 600 watts. Read carefully, or better check on the manufacturer's website. My mum 44r1 500 watts.




Svetta, if you choose a minute, tell us about the use of disks in practice.
I bought my 4 mumiks "naked", with only two whisks and a hook for dough. So I decided to replace the hand mixer. And now I'm getting into the taste and thinking hard, and not whether to replace the small Philips combine with shredders and graters simply with a Mumik attachment.
Therefore, I torment you with questions about nozzles and graters.
Thanks to everyone who shares their experience!

[Tanya]

Tanya, we have a topic on MUM4, it is possible that they will answer your doubts faster.

Why not just replace the small Philips combine with shredders and graters with a Mumik attachment.

I have a full set of Mum 4 and a small Philips.
The bottom line is this: I do not use a shredder on Muma, it is not convenient for me, cumbersome.
I actively used little Philips for grating vegetables until I bought a Philips HR1388 shredder.
Now it is constantly on the table, Philips 7605 combine as an addition (potato pancakes, chopping with a knife).
And the big Mum 4 is just for kneading and whipping .......

[Zeamays]

Zeamays, Svetlana, thank you very much! You helped me save family money and storage space

[Zeamays]

Zeamays, Sveta, plus to small Filip against MUM4. If I had first bought a Philips 7605, then I would not have bought MUM4 (there is also a shredder in the Zelmer meat grinder, it would have been enough for the eyes).

shredder Philips HR1388.

Bosch universal cutting on MUM4 and MUM5 is essentially the same as this shredder,
the difference is small.
even the designs are very similar.
the only difference is in the shape of the motor part.

If I had bought Philips 7605 first, then I would not have bought MUM4

7605 is the same as Bosch's multi-mixer.
It may well be enough MUM, as a kneader with only beaters and a multi-mixer as a grater / shredder and chopper.

The multi-mixer is easier to clean after use than the universal cutter and bowl.

Well, how good it is to live in the Khlebopechkin family!
Thank you very much, virtual friends! For a whole week I racked my head with these shredders for the mumik, it turns out that she and Phillips are twins and brothers.

Phillips are more compact than MUM and are more convenient to use.Bosch uses more flexible plastic in the MUM "Axes for universal cutting of the Bosch MUM4, MUM8" food processor, compared to the Philips multi-cutter (sometimes, at MUM, the universal cutter clogs up so that you have to disassemble and release this axis).
I have: both MUM4655, and Philips - both 7605 and 1388. MUM is a dough mixer, mixer, beater and meat grinder. Shredder - 1388 multi-cutter from Phillips (before purchasing it, I shredded large volumes at MUM).
And for 1-2 servings - all actions in 7605 from Phillips.

the difference is small.
even the designs are very similar.

The designs are similar for everyone, and the new ones being considered in the neighboring branches of Ninja and Veggie Bullet are similar to Philips.
Size difference.
The freestanding Philips HR1388 shredder takes up three times less space on the table than the Mum4.
For my daily work, it is more convenient for me.

Bosch universal cutting on MUM4 and MUM5 is essentially the same as this shredder,
the difference is small.
even the designs are very similar.
the only difference is in the shape of the motor part.



7605 is the same as Bosch's multi-mixer.
It may well be enough MUM, as a kneader with only beaters and a multi-mixer as a grater / shredder and chopper.

The multi-mixer is easier to clean after use than the universal cutter and bowl.

Phillips 7605 is easier for me to use because of its size. It stands on the table, and the multi-cutter is on top of the combine, which must first be pulled out from under the cabinet to gain access to it.
The multi-cutter has only three discs and that's it, and in Phillips I have 4 graters, slicing, bar cutting, and a chopping knife and emulsion disc.
Here, everyone chooses equipment for their needs, for me personally, the Philips 7605 turned out to be indispensable.

[Tanya-Fanya]

Tanya-Fanya,
I have 600
Svetta,
Or you can link to the topic, otherwise I did not find exactly about 4, only about the nozzles

Here everyone chooses equipment for their needs

Exactly. Well, I'm not imposing, but I mean that some devices are similar in function.
And then everyone decides that it is more convenient for him either one motor unit and a bunch of attachments for it, or several different kitchen gadgets narrowly tailored to their tasks.

in Phillips I have 4 graters, slicing, bar cutting and a chopping knife and emulsion disc.

According to the description on the Philips website, there are only three replaceable inserts (grater, pan grater, shredder), a rotating knife and a whisk disc.

So I was left without a "cube" attachment? And I will have to make cubes with pens, pens, pens

By the way, pay attention to the Boshevsky blender with a cube cutter, such as MSM881X2, MSM671X1
For one-time volumes it is much more convenient than the MUM cube cutter.
Smaller and easier to clean.
The stocks come at very sweet prices, MSM671X1 came across at 5990 rubles.
Philips also has similar dice blenders (Philips: HR1669 and HR7969).

According to the description on the Philips website, there are only three replaceable inserts (grater, pan grater, shredder), a rotating knife and a whisk disc.

I bought the rest, fits from other Philips models.

Or you can link to the topic, otherwise I did not find exactly about 4, only about the nozzles

So what, what about the attachments, there is all infa for 4 series. Here, too, the topic touches on the nozzles, and there it is about everything.

[Cacktus]

Cacktus, thank you so much, you gave so much useful information
About cubes from Philips - a good idea, I will study.

Or you can link to the topic, otherwise I did not find exactly about 4, only about the nozzles
So what, what about the attachments, there is all infa for 4 series. Here, too, the topic touches on the nozzles, and there it is about everything.

Do not be offended, but in that topic we are talking about the attachments.
And here I raised questions about the compatibility of attachments. The mum5 has a wider range of attachments than the mum4.

Do not be offended, but rather send me to the place where you talked about additional attachments to Philips, or where you read about it.

Once again, many thanks to everyone for sharing experience

[Marina]

about additional attachments for Philips,

Here in this thread Marina told and showed about her Philips.Electric vegetable cutter # 2532
And in this thread https://Mcooker-enn.tomathouse.com/in...om_smf&topic=517928.0
By the way, Philips seems to have announced that he is finishing the release of kitchen appliances and is focusing on other products, so hurry up ...

[not]

Phillips seems to have announced that he is finishing the release of kitchen appliances.

It's a pity ... Philips HR7605 (and its previously produced analogs) has no worthy alternative ... For some functions, you can choose an alternative, but "all-in-one, high-quality, functional and compact" - no.
In general, Phillips, like Ozon, was not lucky with managers ...
Phillips' main mistake with the cube cutters was that instead of completing the cube cutters with the whole set of gratings, they decided to sell them as a separate set with a horse price. The result, in principle, was obvious. It was correct to put all 4 grids in the box with the cube cutter, as they themselves demonstrated in their commercial

But, as an addition to compatible models not equipped with a cube cutter initially, sell separately. Well, it's a bad policy to quickly remove some models of accessories from the assortment, even accessory parts ...notoriented service and say nothing.
Even now, when cube cutters are already being produced by all and sundry, no one else has such variability of cutting. It was logical to release a separate cube cutter into an attached container, taking the multi-cutter as a basis and changing the motor and landing rod in it, with a set of gratings, better, adding a new version of the grate - cutting with short bars (like Nyser's) and leaving the shredder-grater disc 420303600301 The saddest thing is that it is still relevant and makes sense.

Philips: HR1669 and HR7969

Long gone - this is the 2012 model.
If you can buy somewhere in the leftovers, then another, later model - a cube cutter for Philips HR1999 / 90 blenders. Fits the following Philips SpeedTouch hand blenders: HR164x, HR167x and HR169x. Additional grilles, and ejectors to them, are the same. And they also need to be looked for in the leftovers in the services selling spare parts.

Hello! Please tell me, if Mum 58252 is dead, then which carcass will be identical, but cheap, so as not to buy attachments that are already there?