Multicooker Brand 37502

Thanks for the quick response, I'll try! And then my husband began to tease me:
- you all praised that nothing burns, and now everything has to be torn off (to tell the truth, in the summer he had to wash the dishes more often than me, I have a garden and little granddaughters).

And also, tell me, do you need to type the address (name, nickname) or is there some kind of button: clicked, and the name of the person to whom you are addressing appears?

And also, tell me, do you need to type the address (name, nickname) or is there some kind of button: clicked, and the name of the person to whom you are addressing appears?

No, there is no button. You need to type a name. You can only click "Quote" in the desired post.

In a nutshell - all programs are 5, baked goods - 4. IMHO

For baking in a multicooker to be at "5", you have to pay 20 - 30 tons for it? Do you need it?

It attaches to the side of the ladle and spoon body. It is not very visible here, but still:

I thought for a month what kind of thing it was, I almost threw it away, then my husband figured it out.

For baking in a multicooker to be at "5", you have to pay 20 - 30 tons for it? Do you need it?

What kind of cartoon do you mean ???

For baking in a multicooker to be at "5", you have to pay 20 - 30 tons for it? Do you need it?

in Brand, everything is baked at "10 ++++", and bread and biscuits, and casseroles ... Look at our reports

[Masha]

Masha Yes, I baked a chicken yesterday. Delighted with the darling all evening.
I am from the process, quickly, without splashes of fat. Sweet from the taste!

[Mistletoe-Ksyusha,]

Mistletoe-Ksyusha, probably, when I said that baking at +4, I meant that the top of the baking is light - Duc is, most likely, for all multi-pressure cookers - but the quality of the product is not affected by the light top!

Girls, we are here expressing a purely subjective opinion, aren't we ??? I meant that due to the structure (removable lid), there is an excessive amount of condensation in this MV, so not all baking recipes are suitable.

[Little]

Little, I answered I am beautiful regarding the price and baking.

Hello everyone! I’m with you too))) For a long time (more than 2 months), but I didn’t crawl out of the bushes))) I’m happy with Brandik, without any complaints - everything is VERY tasty and conveniently prepared - casseroles, side dishes, and hot dishes. It smells like some members of the forum, the silicone seal of the lid, but for now I endure ... Vooot, but I went, in fact, to finally pay my respects to everyone and indicate my presence))) I promise to start sharing culinary achievements with photos in the near future. Have a nice and tasty day everyone!

Hello everybody!
And congratulate me on joining your ranks! Model 37502 was brought to me by a friend from Moscow (it is not sold anywhere in our city). I spent a month studying modes and recipes. I am absolutely delighted! Fortunately, what I was most afraid of (the smell) did not happen. Here I would like to thank Vadim Solynin, the General Director of "Brand" personally, from the bottom of my heart, for his participation in the purchase of my favorite! I was pleasantly surprised by the promptness of his answers (in private messages) and in his actions. Thanks to his efforts, a friend, extremely limited in time, was able to buy a multicooker with minimal stress.
If there are people on the forum who doubt and / or are looking closely at this or that model of multicooker, I want to say - take this one, you will not go wrong! Moreover, an updated model is on the way.

And right after my joy I will share my grief.
Yesterday, after steaming fish (by the way, the fish turned out to be excellent), my cartoon stopped turning on. Absolutely. I plug it in - but it does not beep invitingly, as before, does not blink with lights ... I began to look for the reason.I noticed a few drops at the bottom (condensation dripped from the lid, there was a lot of it - after all, steam), wiped it off. And when I crawled under the towering bottom with my fingers, I was horrified to find condensation dripping from the lid !!! I wiped it off, dried it with a hairdryer as best I could, but the cartoon still doesn't work. Left it open overnight - the same. Can you please tell me if I can do something else, or is that all - my beloved's creeps and I have to go and surrender to the Service?

Let it stand open and dry. Open the lid completely, then condensation cannot enter either the bowl or the heater.

What a passion! Sorry for your cartoon! Maybe it's worth, after all, contact the service - it would, in theory, have already dried, since you dried it with a hairdryer and left it open ...

And I, as promised, am sharing an impromptu: chicken drumsticks stewed with cabbage and a green apple))) I cooked according to the principle, everything that was lying around in the refrigerator)))

[Izum]

Izum I sympathize with you.
It's just not clear why the water got under the heating element?
How can this be from the "For a couple" program?
The condensate should collect in a drip and not pour under the bowl.
Maybe it was originally a marriage? Or did I not understand something?

So, let's try again! Chicken drumsticks stewed with cabbage and green apple. - onions with carrots on baking mode for 10 minutes, added cabbage, rubbed a green apple, half a bell pepper there, added garlic, a spoonful of tomato paste, salt, spices to taste - also on baking mode for another 15 minutes. Then she pushed aside the stewed vegetables, put the chicken drumsticks on the bottom, covered them with a "cabbage" coat, turned on the stewing mode for 30 minutes. In half a multi-glass of warm boiled water, she spread a tablespoon of sour cream, salted it, poured it into a cartoon, and closed the lid. Here's the result:

Sorry for the quality of the photos and their insertion into the message - a photo on your phone. because the camera is unexpectedly discharged, and I haven't really learned how to insert a photo yet (((I'll be better prepared next time)))

[Lala Toy]

Lala Toy, the water got to the bottom apparently in this way. First, I took out a steamer with fish and the inside itself. bowl with the remaining boiling water, and then began to move the cartoon on the table. And it seems that a lot of moisture has accumulated in the sealing silicone rubber, so it got there over the edge. Or, perhaps, when I tried to remove the removable cover to wash, and the inside. the cup, again, was not there. I myself did not notice the moment when the water dripped. Everything was revealed only after 30 minutes, when I again decided to turn on the multicooker for the next dish.
In short, let my negative experience be a lesson: do not carry out any manipulations with the lid and even with the cartoon if there is no bowl inside!

I also got rats. proposal for the "Brand" company: maybe it is worth making a perforation in the lower part (the lower part when the lid is open) of the silicone cover gasket, as manufacturers do in some models of washing machines? : girl_cleanglasses: Perhaps then the condensate will get into the drain holes, and then into the drip tray, and not overflow.

Elena Bo, Thanks for participating. I really hope for the forces of nature, because I don't want to contact our service at all.

[Оmela]

Girls, we are here expressing a purely subjective opinion, aren't we ??? I meant that due to the structure (removable lid), there is an excessive amount of condensation in this MV, so not all baking recipes are suitable.

Оmela, we will turn all fours into fives
In the next batch, the power of the upper heating element on baked goods was increased.
The tests went well. So I hope this four will be fixed.

And right after my joy I will share my grief.
Yesterday, after steaming fish (by the way, the fish turned out to be excellent), my cartoon stopped turning on. Absolutely. I plug it in - but it does not beep invitingly, as before, does not blink with lights ... I began to look for the reason. I noticed a few drops at the bottom (condensation dripped from the lid, there was a lot of it - after all, steam), wiped it off.And when I crawled under the towering bottom with my fingers, I was horrified to find condensation dripping from the lid !!! I wiped it off, dried it with a hairdryer as best I could, but the cartoon still doesn't work. Left it open overnight - the same. Can you please tell me if I can do something else, or is that all - my beloved's creeps and I have to go and surrender to the Service?

...
I also got rats. proposal for the "Brand" company: maybe it is worth making a perforation in the lower part (the lower part when the lid is open) of the silicone cover gasket, as manufacturers do in some models of washing machines? : girl_cleanglasses: Perhaps then the condensate will get into the drain holes, and then into the drip tray, and not overflow.

... I really hope for the forces of nature, because I don't want to contact our service at all.

On Monday we will try to solve this problem promptly. It's a pity that it happened, but you shouldn't worry. Everything will be fine

About rats. offers. It is impossible to make perforations in the lid gasket, since in this case, steam will flow through it during the operation of the multicooker, which is not good.

[Izum]

And right after my joy I will share my grief.
Can you please tell me if I can do something else, or is that all - my beloved's creeps and I have to go and surrender to the Service?

Izum, countrywoman, how is it today? Maybe already working?

[Оmela]

Оmela, we will turn all fours into fives
In the next batch, the power of the upper heating element on baked goods was increased.
The tests went well. So I hope this four will be fixed.

Vadim, what about the 501st?

Girls, condensation can get into food or on the heating element if the lid is not lifted all the way (not up to 90 degrees). If the lid is fully lifted (standing), then the condensate flows into the drip tray. In short, open the lid completely and you will be fine.

Vadim, what about the 501st?

Does the 501 also have such a problem?

[Оmela]

Оmela, we will turn all fours into fives
In the next batch, the power of the upper heating element on baked goods was increased.
The tests went well. So I hope this four will be fixed.

That's lovely! And ours will not be able to increase this power in any way? And that’s enviable. I want perfection.

[Vadim]

Does the 501 also have such a problem?

I can only say for my 501. I bake charlottes on biscuit dough, chocolate on boiling water, bread - no condensation.

Vadim, You are about this in the thread about 501, throw a question, not everyone will see here, and suddenly someone has moisture in 501.

That's lovely! And ours will not be able to increase this capacity? And that’s enviable. I want perfection.

I subscribe to the question. What about us? So we will remain low-power

[Aygul,]

Aygul, especially in order to answer you, I turned on the cartoon - it does not work. I didn’t want to turn it on earlier than 3 days later, I hoped that the contacts would dry out. And now my hopes are melting every day ...

On Monday we will try to solve this problem promptly. It's a pity that it happened, but you shouldn't worry. Everything will be fine

Vadim, Thank you so much for the help offered. But, since my "patient" and I live a thousand kilometers from Moscow, I am afraid that
solving the problem easily and quickly will not work
After you outlined the merits of the updated version, I even had a slight regret that I was a little hasty with the purchase. But I am grateful to my slow cooker for the past "honeymoon", when she gave me at "5" all the dishes that I tried to cook.

[Vadim,]

About rats. offers. It is impossible to make perforations in the lid gasket, since in this case, steam will flow through it during the operation of the multicooker, which is not good.

Vadim,I, of course, do not insist on perforation. But if we consider this issue theoretically, then after all, these holes in the closed state of the lid will be pressed, and the steam will not leave. On the other hand, even if there is a steam leak, it still comes out through the valve ...Sorry for the philistine judgment, the engineering did not finish ...

[Оmela]

Оmela, we will turn all fours into fives
In the next batch, the power of the upper heating element on baked goods was increased.
The tests went well. So I hope this four will be fixed.

Well this is right for me! And when will Peter see this game and how can you figure out what exactly it is ??? Maybe there are some secret numbers? Or date of manufacture? Or is another power indicated?

[Aygul,]

Aygul, especially in order to answer you, I turned on the cartoon - it does not work. I didn’t want to turn it on earlier than 3 days later, I hoped that the contacts would dry out. And now my hopes are melting every day ...
Vadim, Thank you so much for the help offered. But, since my "patient" and I live a thousand kilometers from Moscow, I am afraid that
solving the problem easily and quickly will not work

Izum, Vadim, Is there a service center in Izhevsk so as not to send to Moscow?

Does the 501 also have such a problem?

Alas, my three attempts to bake a biscuit ended with disastrous results: the magnificently beaten dough fell, baking into a ridiculous cake with a pool of water on top. Puddles were also observed on the baked bread, but yeast dough is not so easy to precipitate, thank Gd, and I also removed the valve to facilitate the release of steam. However, in fairness, I must say that Elena Br has long offered to bring a cartoon to find out the quality of the heating of the lid, but I just can't get myself together, because this is fraught with certain difficulties for me.
Although, at the beginning of the discussion of the model, there were still girls who mentioned a similar problem https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=147299.120 (ext. 138), https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=147299.240 (post 253 - there is a trace of a puddle of water on the cake and even a path along which it flowed from the cake), https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=147299.380 (post 393), I will not search any more, and so it is clear that I am not fantasizing. But the trick is that not everyone has this problem! For other girls, biscuits turned out to be simply fabulous, which is incredibly pleasing, but also prompts the idea of ​​some "inequality" in the work of heating the lid. So I thought that if we slightly increase its power, then the problem could go away.

Otherwise, I'm terribly happy with the multicooker, I'm looking forward to the updated model, I love your company!

[mamba]

mamba You are a little off topic, updated model 37502,
and you are talking about 37501 about its update, you have not said anything yet
or they said, but in the topic about 37501.

[Izum]

Izum, Vadim, Is there a service center in Izhevsk so as not to send to Moscow?

I found it myself. LLC "DS" st. K. Marx d. 393. Tel: (3412) 43-16-62

I read the whole topic, but did not find anything about the size of the bowl. Maybe someone will write measurements from a saucepan, I would like to adapt it to my Supra

I'm afraid it will be problematic to adapt the bowl from 37502 to Supra, since the bottom of the bowl is rounded, under the heating element. I do not know which model of your multicooker is, but most often the heating element is flat, and as a result you will not have a snug fit of the bottom of the bowl (37502) to the heating element.

my bowl's bottom is also rounded (not like a Panasonic) and outwardly they are very similar. How will it be in height and width? There is nowhere to look at it in stores either, and so hunt to update your bowl

upper diameter 23.6, height 14.7 (I apologize for measuring with a centimeter tailor's tape), it is difficult to measure the lower diameter

I counted with the sides (you can remove 2 mm). Of course it's better to check whether it is included or not

I'll probably have to buy a new cartoon when my bowl is completely peeling
But on the 37502, how does the ceramic bowl behave after prolonged use? I just had a ceramic frying pan and after a year everything began to stick to it both with oil and without, I had to throw it out (

My bowl from 37500 has been serving for more than 3 years. The coating did not suffer from the raids of children with iron spoons, or from the PMM (although the manufacturer did not recommend washing the first batch in the PMM, but the children do not care, as a result, the outer coating became not very pretty, and the inner ceramic one was as good as new).

I dropped my cup today. Tomorrow I'll go for a new one. It seems like there is linoleum on the floor, and it did not fall much, but the coating inside went with small cracks in this place (fell sideways).Now I will use it for steaming and putting yoghurts in jars. It’s a pity. : cray: I am today without multi, as without hands.

[Dusya Tapkina,]

Well, who did not believe that the coating of the bowl is ceramic?

Dusya Tapkina, Seriously, I really sympathize, sorry for your cup ... well, at least there is an opportunity to buy a new one.

I really sympathize ... I, too, literally the other day, almost dropped the bowl - the child grabbed the hand .. all life flashed before my eyes ..
The earliest and most successful acquisition for you, and let it serve for a long time. The projectile does not hit the same funnel twice.
By the way, if possible, take two at once! It is very convenient

Hurray, hurray, hurray! : yahoo: I bought a new bowl! Already put the curd casserole! So I got used to the cartoon for 5 months, that without it, like without hands.

My food periodically begins to stick to me due to plaque on the bottom of the pan, which is not washed off with detergents. I then pour hot water, add soda and leave to soak. Plaque disappears, food does not stick.

But today oblomssss .. the plaque did not go away .. I soaked it twice .. And sho to do ??? Rice is stuck on the Express today.
shl. was upset.

I also have such a raid from time to time. At first I thought that when my husband washes, he does not wash well. And then I realized that no - the husband is not to blame))