manul
j @ ne, Evgeniya
Marinuly, Marina
Happy to help!
In general, it turned out interestingly with the purchase of the bowl.
I wanted to buy it last year and bookmarked it when I decided to order it, it was gone
The managers answered that there would be cups and I periodically checked the link. As a result, they appeared and I ordered. Only then did I accidentally discover that if you go through the site, it is not in the attachments.
So I hurry to report to our forum!
Happy Holidays to everyone
Evgeniya
manul, Alexander, your link turned out to be a miracle! You are like Santa Claus - with a gift! I also ordered at a discount, I'm waiting!
Thank you!
LydiaVera
Quote: Miranda
With a new one it will be possible to use it only without a casing due to the nameplate
you may ask, what is a label?
Helen
I also ordered a bowl yesterday ... but without any discount ... in the morning they confirmed my order, and today after reading the info about discounts here, I phoned the site and said that I bought a car from them and I want a 7% discount, and I problems made ... !!!
Evgeniya
Miranda, Miranda, I sent you. Or maybe with girls in Moscow to order 2 bowls, delivery for two.
Miranda
LydiaVera, the new induction on the bowl of the well, in the new lids of the nameplates that cover these wells. On the front splash cover, on the rear cover.

All other bowls have 6.7 liters. even though metal, even plastic, there are no holes, so it won't work with lids - the spray cover won't slide to the end, and the casing will rest and the head won't close completely.

Therefore, add. bowls or native with holes (the price is not known, but definitely expensive, abroad 100-120 euros, depending on where). Either any other, but without covers, or try a cover + casing from the first induction.
***
Girls, about the map - don't cook a pot, thank you all very much!
We are with Marinuly, ordered the second bowl - the delivery became free (since the order is more than 5 thousand) and with a discount on its card.
Marinuly
manul, you are our savior!
Evgeniya
Quote: Marinuly
manul, you are our savior!
That's for sure! How quickly we organized!
LydiaVera
Miranda, Thank you! I admire your knowledge of all these Kenwood troubles, really cool! Is it possible to find out about this somewhere on Russian-language resources so as not to bother you with stupid questions?
Peter Push
Quote: VRad
Girls, who uses Kenwood scales? How are they? Nowhere could I find out after what time they turn off.
VRad, once I asked this question, there were no rave reviews, not a fountain, in a word. And they sent me to study the subject of scales. Mine, too, then breathed in incense, but I have been using them for more than a year, and they are still breathing.
Miranda
I did not hope for a second native induction bowl, since they are very expensive. And I ordered a friend in Germany for plastic ones, and even asked for a minimum of 3, and preferably 4, because for some processes, especially multi-colored creams, like night_furia I would miss + 1 cup.

I will now trade in plastic bowls when they arrive
Prank
Quote: Miranda
I will now trade in plastic bowls when they arrive
I book one
ludmila_27.79
Quote: LydiaVera
Girls, who uses Kenwood scales? How are they?
I had the scales in the kit when I bought the harvester, though it was a long time ago. The scales are ordinary, it is convenient only because you can weigh directly in the bowl from the combine; on other scales, not all of this works. Now my scales are broken. For a long time, the contact was leaving, I had to pull out the battery and insert it again to work. And now they do not turn on at all, I changed the battery, it did not help. I didn't repair it, I bought a new conventional scale.
Miranda
Prank, agreed!

I hope it will ship soon, the package is a combined hodgepodge. We are waiting for the last piece under the order - an additional (fourth) cone-blade "spaghetti" to the Kenwood spiralizer, which my brother and wife bought in Kiev, and which I will have in a week.

By the way, a friend found out in German Kenwood about a spiralizer as a nozzle. It is expected to be on sale in Europe this year. The price is unknown. Judging by the Russian language in the multilingual instruction, we will have it too. But we started selling Gourmet almost a year later.

The nozzle and the separate one do not differ in details (cones-blades, a circle into which they are inserted, a guide tube-cover, a pusher, etc.). Therefore, I plan, when the nozzle and the details for it appear, to bribe the fifth cone (wave cutting), if, of course, I like the spiralizer.

In fact, they have only one main difference - the motor / power. The individual has the final power, the attachment has the motor and the power of the machine itself, that is, you can change the speed, etc. Perhaps this will affect the quality of the cut. Although, who knows.

Well, the appearance and equipment (which can be purchased) are also different, but this is important only for those who want a nozzle or a separate one.

As I get it, I'm going to write a review. I think it will also be interesting for those who are looking for a nozzle.
LisaNeAlisa
Miranda, I'm just waiting, waiting! Recently, I've been watching more and more of the bushes) but the new nozzle is interesting)
LydiaVera
Girls, Happy Old New Year to you!
When the dough rolling machine works for you, does it creak in an inhuman voice? As if there are skewed pieces of iron rubbing against each other. I have used it 5 times so far, but it seems there was no such nasty squeak. She is dear, for 9060, costs a lot of money and behaves like that. This is normal?
Yutan
LydiaVera, in my opinion, not normal! My dough sheeter is one of the most popular attachments. It so happened that I use it several times a week (dumplings, noodles, dough for cookies). Never squeaked.
anna_k
LydiaVeraDid you wash her under water?
j @ ne
LydiaVera, if the nozzle is still under warranty, it is worth changing. If not, then someone in the thread mentioned that he was promoting. Perhaps large crumbs got caught and dried.
Twig
I also creak. Doesn't the warranty seem to cover the attachments? I was also advised to disassemble.
In a flea market, someone was selling a noodle cutter, describing to the advantage that it thinned out the dried dough in separate strips, and when raw, glued together in two noodles. Like this is a two-in-one advantage. I just burst out laughing.
Ken's noodle cutter quality is not up to par. Better to have a separate gadget.
Kara
My nozzle for cutting thin pasta creaked like hell, it seems to be called trenette. The husband did everything with her. But this rattle did not affect the quality in any way.
leostrog
Quote: Twig

I also creak. Doesn't the warranty seem to cover the attachments? I was also advised to disassemble.
In a flea market, someone was selling a noodle cutter, describing to the advantage that it thinned out the dried dough in separate strips, and when raw, glued together in two noodles. Like this is a two-in-one advantage. I just burst out laughing.
Ken's noodle cutter quality is not up to par. Better to have a separate gadget.
I have a separate dough rolling Marcato - I'm very happy with it.
And I keep it not for noodles (we do not eat pasta), but for rolling out dough for cookies, pies, etc.
Twig
leostrog, I also bought an Atlas with a motor.
I compare the quality of Kenwood and Kitchenaid-kitschen nozzles, which is much more pleasant. I wanted to write Heaven and Hemlya, but it's not true.

Eh, there is no perfection in life. There would be a Kenwood machine with induction, and low-speed nozzles from Kitchen - it would be a thrill!
anna_k
And I liked the Kenwood attachment more than the empire with the motor
LydiaVera
Yutan, anna_k, j @ ne, Twig, Kara, leostrog, anna_k, girls, thank you all for your participation! I didn't wash it with water. I don’t know what to do, tomorrow I’ll call the Cookingshef and listen to them. She is one of the most necessary for me, noodles and dumplings are a pleasant bonus. I'm afraid to disassemble so far - suddenly it will be necessary to change or something like that.
If this creak does not affect the life of the nozzle, then okay, I'll sacrifice my nerves. Although for 10 thousand you could have done better. But if she gives it out before dying, then it's terribly simple. Here is howling like a beaten dog.
Olga VB
I creaked when the dough got inside. Then, apparently, it somehow dried up and spilled out, and the nozzle stopped creaking.
anna_k
I remember my husband disassembled this attachment and cleaned it, but then he could hardly put it back together. And it is more likely because he heard the price from me, I had to strain not to buy a new one

In general, I do not recommend repeating, it is very difficult and there are many small details
LydiaVera
Now I'll put it on the table, let it also lie down, dry, suddenly help. Tomorrow I will drive her again. And I'll call the site. I will leave my husband with a sledgehammer as a last resort. I'll write later how the matter ended.
Gayane Atabekova
LydiaVera, My husband periodically dismantles the dough sheeter. You have no idea what's going on inside. I disassembled it myself the first time (it stopped spinning), but I could not assemble it.
For that kind of money, they could have done so that the dough does not get inside. And without her I can't make dumplings, I can't make khinkali.




Shake it when dry. Part of the dough will spill out.
LydiaVera
Quote: Gayane Atabekova
the husband periodically disassembles the dough sheeter
Thank you! This is good news, since it can be disassembled and reassembled many times.
atamana
Quote: VRad

Girls, who uses Kenwood scales? How are they? Nowhere could I find out after what time they turn off.
My old scales are on fire. I wanted to buy Tanita for 5 kg, but they are not there and it is not known when they will be. So I thought, maybe buy Kenwood at Globus, although I did not find rave reviews for them

I can't say anything bad about the Kenwood scales, I used them for eight years, even before the car, you can lose the tare weight, the only negative for me is a step of two grams, you need special accuracy, weight up to 8 kg, although there is little that needs to be weighed more ... Redmond is definitely better, looking beautiful, with a retractable display, but in which in different parts of the platform, it shows different weight.
VRad
Quote: atamana
Can't say anything bad about Kenwood scales
Ladies, thanks to everyone who responded. Dropped Kenwood in favor of Beurer. I found those on which it is convenient to weigh the bowl.
atamana
Quote: VRad

Ladies, thanks to everyone who responded. Dropped Kenwood in favor of Beurer. I found those on which it is convenient to weigh the bowl.

And now I have Soehnle Page Profi Hold, up to 15 kg, an enlarged platform, the ability to weigh non-formatted containers, which closes the scoreboard, step 1 g, I ordered CU, but now at the technical site ru for 2500.
Marinuly
Quote: atamana
And now I have Soehnle Page Profi Hold
Interestingly, I just need to look after the new scales. Now I use the Beurer firm, but they have been for many years.
As for Kenwood, I didn't like it. Weight changes from the slightest movement. They came as a gift, I would not buy them myself.
VRad
I don’t know about others, but my sieve is spinning in the process. Both the rim and the metal insert rotate. Maybe you need to slightly raise the nozzle with the blades?
True, today I solved this problem. I put a napkin folded in half on the edge of the bowl (about a third of the diameter).
I have 992. But it differs only in the thickness of the pin. The rest of the parameters are the same as 930.
Miranda
VRad, not only the thickness of the pin.
Also in height, since the bowl from 992 is smaller in height than the bowl 930.

Kenwood kitchen machine: working with attachments

With a pin from 930 and a bowl from 992, the head will not close.
And with a pin from 992 and a bowl from 930 it will not reach the disc, even if you twist it to the maximum.

Twisting the pins, that is, swapping the pins at the blades, will also fail.

Only the sieve discs themselves are identical and interchangeable.

VRad
Miranda, Thank you.
The question about "torsion" remains open. Does anyone have a sieve or just me?
Skazi
Valeria, I have 930, I didn’t use it a lot, but nothing worked during those rare times of use.
Twig
At idle, if you turn it on, twisting is possible. There is no torsion with products.
LydiaVera
Girls, I'm again with my rolling. Thanks for the advice.She shook her like a pear for two days, kept her in a hot kitchen, shook her again. She shook out the dried pieces. I put the dough to roll today, at first there was a normal sound, then at 6-7 mode I started to whine a little. Probably not everything jumped out. But I have already calmed down, there was a shock yesterday.
I asked, just in case, on the site, it seems that the attachments have a one-year warranty. Therefore, I will not spin it yet. A friend from the service center could not advise anything on this matter. He has never been approached with these attachments at all. But this is a good sign - it means that although they creak and howl, they do not break.
Although Kesha is good, but if I had more space, I'd better buy a separate one with an Akita motor. It is wide, the dough would not be hammered so much. And the price is comparable to the Keshina attachment.
VRad
Quote: Twig
There is no torsion with products.
An, no. It is with products that it turns. Today I was wiping very dry cottage cheese, so until I realized to put a napkin, it just worked at idle. Unfortunately, I don't remember what happened to the berries, but if it did, it was not so active.
Twig
Alternatively, insert a silicone piece. The cons in the store told me that this was the norm, I didn't have Kenwoods then, I just looked at the nozzles and was surprised that the sieve was loose
vis
Quote: VRad

An, no. It is with products that it turns. Today I was wiping very dry cottage cheese, so until I realized to put a napkin, it just worked at idle. Unfortunately, I don't remember what happened to the berries, but if it did, it was not so active.
I have a 992 attachment and a small bowl. It also spins, and with products as well. I already wrote about it. Somehow, such a performance of a nozzle for such a price is surprising ... It would not be so difficult to come up with somehow fix it ... But for some reason Kenwood does not bother, and it will do))
Marinuly
Girls bragging about brought me a cup
Kenwood kitchen machine: working with attachments Kenwood kitchen machine: working with attachments
It turned out to be for a new induction, they said that for 096 it would hardly be available anymore.
Evgeniya
Marinuly, Marina, does our 096 recognize her? Does induction work?
Miranda
Marinuly, so unexpectedly, we have a bowl for a new induction. Its real code is KW716599, here it didn’t shine in stores before, but I saw from 110 to 130 euros abroad.

And, by the way, the code under the secret link corresponds to just an iron bowl for majors, with silicone-free handles, etc.
Marinuly
Evgeniya, Evgeniya, everything is normal! Recognizes darling
The only difference is that the new one has two nozzles for draining and a marking inside.

Miranda, well, yes, that's why, when ordering the manager, I tortured that there was only induction and no more
Evgeniya
Quote: Marinuly
everything is normal! Recognizes darling
The only difference is that the new one has two nozzles for draining and a marking inside.
Hurrah! We are glad to markup! And noses too!
It seems to me that managers are not aware of which cups they are selling
Marinuly
Quote: Evgeniya
It seems to me that managers are not aware of which cups they are selling
Now in the know.
Together with the courier, we called them and found out.
Miranda
Quote: Marinuly
Now in the know

Now kaaak they will understand, kaaak will raise prices - and hello

Me when Marinuly, I called with a question - what to do, the courier brought bowls for a new one, to take it or not - at first I thought that it would be possible to give up with those who, using a promotional code for a new car, received a bowl for an old one. But then she quickly changed her mind.

The old induction bowl fits the new one only without lids. You can do without a steam cover, but induction will not turn on without a casing - the protection will work. If you can burn a hole in a plastic bowl, you can't cut it out in a metal one.

And the bowl of the new induction fits both cars, suddenly I have a new one in a year or two or three. There is nothing to break in the bowl, it is forever.

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers