Kitchen machine Kenwood (2)

Inusya, cheaper if you are from Kiev. They send them to the regions by cash on delivery, it cost me about 140 hryvny more. from a cost of 900 UAH In general, it would be cheaper for me through the same outlet - they have the same price.

Inusya, cheaper if you are from Kiev. They send them to the regions by cash on delivery, it cost me about 140 hryvny more. from a cost of 900 UAH In general, it would be cheaper for me through the same outlet - they have the same price.

And, well, if so, then yes. I just asked a Kiev girlfriend, she will bring them, they have a shredder of 449 UAH.
IN to the "outlet" it is already 560!
Even in Foxtrot it is 60 UAH cheaper (only 500) ...

It's just that it is not available, therefore, the price is "from the bulldozer", but what is at 1 UAH. expensive.

And, well, if so, then yes. I just asked a Kiev girlfriend, she will bring them, they have a shredder of 449 UAH.
IN to the "outlet" it is already 560!
Even in Foxtrot it is 60 UAH cheaper (only 500) ...

🔗 UAH 369 (written at night cheaper - the usual price is 449)
🔗 449
🔗 499 UAH

right now, I'll deal with night orders ...

And I looked, but did not order .... I haven’t bought the combine yet (I dream everything) - the kitchen is in the process of repairing ....
I wonder how often they have such overnight promotions?

there are telephones there, by region, you need to call and ask ...

I, too, finally got a 010 very happy. I mostly need it for a pastry chef, so I already appreciated the power and the attachment with silicone blades for grinding, homemade cottage cheese grinds into a mass perfectly. Before that, I had a 260 model from Germany bought, but we unwound it there, the plastic gear shafts did not wear off at all with intensive use for more than 2 years. Girls who will tell me to think about buying a meat grinder for her meat from the veins needs to be cleaned?

Girls who will tell me to think about buying a meat grinder for her meat from the veins needs to be cleaned?

I join the question

Girls who will tell me to think about buying a meat grinder for her meat from the veins needs to be cleaned?

I join the question

Girls, I have a meat grinder - I'm happy. There is no experience of using other electric meat grinders, there is nothing to compare with. Compared to a manual meat grinder - Kenwood is UNWAYS better, I don't clean anything on purpose, I cut the meat into convenient pieces and that's it

"Before turning, it is necessary to remove all bones from the meat and cut off the films" - this is from the instructions. I have such a meat grinder, I wrote about it here earlier, I was not lucky to "chew" the meat, in general I would now buy a separate one, the same kunwood, the price is almost the same

I'm confused

010 and 020 how are they different? different bowl volume and power, right? And also, which one with, and which one without a meat grinder? Save, and I will stop wanting

I'm confused

010 and 020 how are they different? different bowl volume and power, right? And also, which one with, and which one without a meat grinder? Save, and I will stop wanting

Julia, don't panic: girl_mad: It is 010 and 020 that do not have a meat grinder in the kit, you need to buy it separately. The differences I wrote to you: the power and volume of the bowl

Julia, don't panic: girl_mad: It is 010 and 020 that do not have a meat grinder in the kit, you need to buy it separately. The differences I wrote to you: the power and volume of the bowl

and that's it?

and that's it?

well yes

I'm confused

010 and 020 how are they different? different bowl volume and power, right? And also, which one with, and which one without a meat grinder? Save, and I will stop wanting

Julia, the basic equipment for these machines (KM 010 and km 020) is the same - these are 4 nozzles for whipping and a blender.There are different configurations, for example, KM 010 007 comes with a meat grinder and a juicer, and in KM 023, in addition to a blender (it's metal there) and 4 attachments for dough, cream, etc. there is also a meat grinder, a citrus juicer, a mini chopper, harvester, scales. There are a lot of videos on youtube on this topic - type kenwood km010 or 020 and see the complete set in detail.

"KM 010 - power 1400 W, steel bowl 4.6 l," basic equipment ": whisk for whipping, K-shaped mixing attachment, hook for kneading thick dough, elastic attachment for soft mixtures, glass blender AT338.
KM 013 - the same KM 010, "basic configuration" (instead of the AT338 glass blender - steel AT339) + AT950 meat grinder + AT640 food processor + AT960 citrus press + AT320 universal grinder + AT750 electronic scales.
KM 010 007 - the same KM 010, "basic configuration" + AT950 meat grinder + AT641 centrifugal juicer.
KM 020 - power 1500 W, steel bowl 6.7 liters, "basic configuration" - identical to the configuration KM 010.
KM 023 - the same KM 020, the equipment is identical to the KM 013 configuration "This is probably more clearly

I'm confused

010 and 020 how are they different? different bowl volume and power, right? And also, which one with, and which one without a meat grinder? Save, and I will stop wanting

Yul, choose between 10th and 20th. It all depends on how much volume you need. Of course, the power affects this. You can buy the rest that is necessary. Personally, I decided for myself that it would be better to let it be more ... So I took it ...

Girls, lovely, thank you

Inna, I think so too.
I looked through the prices for accessories and met different letters and tsiferki in the marking of the "meat grinder" attachments, the question is, which one will I need, with what marking?

P.S. but there is no nozzle for making beer, I need a weighty argument for my husband

P.S. but there is no nozzle for making beer, I need a weighty argument for my husband

tell me what you have!

... and there is a meat grinder AT 950.

[For kitchen machines series: Chef.]

I found two identical (in appearance) nozzles, but the price for one hundred hryvnia is different and one has a postscript For kitchen machines series: Chef. - What is it like ?

And why is it much more expensive on the official site than in other online stores? Is there a risk of buying a fake?

[For kitchen machines series: Chef.]

I found two identical (in appearance) nozzles, but the price for one hundred hryvnia is different and one has a postscript For kitchen machines series: Chef. - What is it like ?

Found 010 chief, but 020 major - right?

So.
And I bought all the attachments on different sites-
while there were no problems with fakes)))

No, Alena, I'm not talking about the attachments, but the machines themselves. The difference between an official site and another online store over a thousand hryvnia

I bought my Major on the site cheaper. no (English letters).
The price was also much less than at the office. site.
Probably, they take for the name ...)))

No, Alena, I'm not talking about the attachments, but the machines themselves. The difference between an official site and another online store over a thousand hryvnia

Julia, I was choosing between 010 and 020 - I took 010 (the price is lower). Although if there was a material opportunity, I would take 020 (more the volume of the bowl). I bought 010 with basic equipment (combine + blender). You can buy a meat grinder, but I don't need a juicer.

By the way, in Foxtrot and Comfi there were shares for Kenwood and nozzles.
Often on the official website, they charge a higher price just because of the words of the official representative.

Girls, do not tell me, the question arose - I really want to wash the nozzle for rolling the dough, it says to wipe it with a damp cloth. Has anyone washed it? FAQ can this happen to her?

No, Alena, I'm not talking about the attachments, but the machines themselves. The difference between an official site and another online store over a thousand hryvnia

Julia, we somehow bought my mother KM 010 in Kiev, on one of the sites the price for 013 was lower than for 010, I was asking them for a long time, why? To which I received a secret answer - some of the cars were imported legally, they are more expensive, some - not legally, so the difference in price, this does not affect the quality of the cars.

Girls, do not tell me, the question arose - I really want to wash the nozzle for rolling the dough, it says to wipe it with a damp cloth. Has anyone washed it? FAQ can this happen to her?

It is NOT RECOMMENDED to wash any dough rollers.

I also monitored shops on the Internet, prices are different everywhere, I turned to a friend who was engaged in technology, as he told me that those that are cheaper are fake, the only thing that would be profitable for me to order from Germany would have cost a meat grinder. juicer th and an additional bowl of 6 thousand 010 model, but it was necessary to wait 2 months until relatives buy and send it and until it arrives. and the car was needed already yesterday (
From my experience, I can say about the volume of the bowl, in my 260 model it was 4.5 liters and it was enough for me, despite the fact that I do cakes, so I stopped at 010

So what to do now, where to get it and where is the guarantee that a fake will not be slipped in for a lot of money?

[Lozja]

Julia, I am sure that the question is not about fakes at all. The more "hands" the goods pass through, the more expensive it gets from the end seller. The closer to the "primary source" the cheaper. The difference even hovers around a thousand.
I’m trying to explain.
What you call - the official site - is not (as I understood it was Kenwood-shop.com.uk).
Since the official site is not engaged in SALES. This is, how to say, a site advertising products.
If you go to Kenwoodworld.com, then yes, it will be our office. Kenwood website. But there are no prices. There is only a list of products and information about the manufacturer, etc. There is also a list of stores where you can buy products, many of our supermarkets are listed there, including online stores.
Therefore, you can assume that where you are looking is just a Kenwood & DeLongey SALES site. And they set the price as they see fit. That's all.
By the way, in the "Rosette" the price is the same as theirs, in the kenwudshop (1 UAH more expensive).
On our forum, a girl is selling various such pieces, ask her. Oksana Lozja.
That year when I wanted (later, circumstances did not grow together) it was very profitable to take from her. Just ask if it's in stock now.

It is NOT RECOMMENDED to wash any dough rollers

Ehh sorry, I got the dough in the slits to wash the hotts thoroughly.

So what to do now, where to get it and where is the guarantee that a fake will not be slipped in for a lot of money?

Julia, to be honest, I doubt very much that such things are counterfeited (the metal case is done by hand within 3 days, it is very heavy, massive), but if in doubt, order in Germany or go on vacation abroad yourself, we have, for example, 020 costs about $ 655 and nozzles are 2 times cheaper than in Russia at least

No, Alena, I'm not talking about the attachments, but the machines themselves. The difference between an official site and another online store over a thousand hryvnia

Julia I bought here 🔗 4991 UAH. $ 605

if in doubt, order in Germany and nozzles are 2 times cheaper than in Russia, at least

Daria, how to order in Germany?

I, too, have not come across information about Kenwoods forgeries either here on the forum or in the reviews on other sites. The harvester itself and each attachment to it are packed so beautifully and with high quality, very good printing products. So do not even think about fakes, you will definitely be delivered a high-quality car that will delight you for a long time.

here, for example, 020 costs about $ 655 and nozzles are 2 times cheaper than in Russia, at least
[/ quote]
Daria, everyone wanted to ask you where is the best place to buy attachments in Dubai? My sister flies there once a month, or rather to Abu Dhabi, I asked her, she says that the price of the equipment is the same as ours.

Daria, how to order in Germany?

unfortunately I can't recommend a specific site - it's just that you often come across posts where people successfully ordered and came out cheaper, our attachments are cheaper (I live in the UAE)

Daria, everyone wanted to ask you where is the best place to buy attachments in Dubai? My sister flies there once a month, or rather to Abu Dhabi, I asked her, she says that the price of the equipment is the same as ours.

OxiSK, in the Emirates, nozzles are sold only in Jashanmal stores (in Abu Dhabi there is jashanmal in the Marina mall and Abu Dhabi mall) -they are official dealers, the kitchens themselves. cars can be bought in other hardware stores - E max, Sharaf Dg, Panda, Carrefour (ala our Auchan) have never met anywhere else

Daria, thank you very much. And do not tell me the price they come out cheaper than in Kiev or Moscow?

Daria, thank you very much. And do not tell me the price they come out cheaper than in Kiev or Moscow?

Yes, cheaper, for example, a press for berries recently looked at it cost 245 dirhams, a rubbing sieve was bought for 145, a dough sheeter was 275 now, like 300 with a penny, a potato peeler price is 195 (as in Russia) for a moim, all nozzles cost up to 400 dirhams. Course: 365 dirham -100 $

On our forum, someone wrote that he ordered from Germany here, if there are relatives or friends, they can send you a parcel through the Czech Republic (I don’t remember the company) and there will be no need for customs clearance and other fees. I received my 260kenwood (2 years ago It cost me 90 euros to send it. I bought it on Ebay, an analogue in Ukraine like 266 costs around 3 thousand) and so on. Not large equipment, the only thing is that the delivery is from 1.5 to 2 months. the price is 1.75 euros per kg. and 8 for processing and tightening the box in polyethylene

🔗

I also thought that a fake could be caught, but such an expensive unit is unlikely to be forged, everyone makes their choice, it cost me 010 with delivery home of 6200 UAH. and the warranty card is sealed (by acquaintance we take all the equipment), but the date is not set, this is also +

[Daria33]

Daria33! There is no need to wash the roll, the dough will dry out and fall out of it at the first start.

I have a manual rolling, when it dries up, I knocked and everything falls out)

On our forum, someone wrote that he ordered from Germany here, if there are relatives or friends, they can send you a parcel through the Czech Republic (I don’t remember the company) and there will be no need for customs clearance and other fees. I received my 260kenwood (2 years ago It cost me 90 euros to send it. I bought it on Ebay, an analogue in Ukraine like 266 costs around 3 thousand) and so on. Not large equipment, the only thing is that the delivery is from 1.5 to 2 months. the price is 1.75 euros per kg. and 8 for processing and tightening the box in polyethylene

🔗

I also thought that a fake could be caught, but such an expensive unit is unlikely to be forged, everyone makes their choice, it cost me 010 with delivery home of 6200 UAH. and the warranty card is sealed (by acquaintance we take all the equipment), but the date is not set, this is also +

From Germany online shop at h-duve.de. Excellent service, tax deducted, price much lower.

I tried to squeeze orange juice with the AT 960 nozzle. Something I am doing wrong, probably I had to manually squeeze

I tried to squeeze orange juice with the AT 960 nozzle. Something I am doing wrong, probably I had to manually squeeze

Why didn't it work? What was wrong? We love orange juice a lot

Why didn't it work? What was wrong? We love orange juice a lot

It seems to have installed everything, as the instructions suggest. But when I turned it on, nothing twisted. The motor made a sound and that's it
I had a food processor and no difficulty in making appellas. there was no juice (it broke for a long time, that's why I bought Kenwood, looking closely)

It seems to have installed everything, as the instructions suggest. But when I turned it on, nothing twisted. The motor made a sound and that's it
I had a food processor and no difficulty in making appellas. there was no juice (it broke for a long time, that's why I bought Kenwood, looking closely)

So either I did something wrong, or - I was making juice (we’re talking about the press for citrus fruits, I don’t remember the nozzles by numbers?) Everything was spinning and the juice turned out

[Daria33]

Daria33! There is no need to wash the roll, the dough will dry out and fall out of it at the first start.

Thank you, I have already resigned myself to the thought that the dirt from it will fall off by itself

I tried to squeeze orange juice with the AT 960 nozzle. Something I am doing wrong, probably I had to manually squeeze

Albina, this is a nozzle for a medium-speed socket, if it rotates when turned on, then something is wrong with the nozzle or its installation

Thank you, I have already resigned myself to the thought that the dirt from it will fall off by itself

Albina, this is a nozzle for a medium-speed socket, if it rotates when turned on, it means something with the nozzle or its installation

Phew, at least I'm not the only one with a citrus press attached to a medium-speed socket, in all instructions and in a video about kitchen machines KM10 and 20 it is shown that this nozzle should be attached to a high-speed socket. I even had a small dispute about this with one of the forum participants.