Kitchen machine Kenwood (2)

It is usually white. The material is fluoroplastic (this is the same Teflon, by the way). It is located inside the body of the meat grinder, a millstone rests against it. If it is not there, then there is no pressing of the disk to the lattice. A long time ago, when I bought my PG-520, another person bought a Kenwood household meat grinder (it cost much cheaper), and then they lost this little thing in it - the meat grinder barely worked until the person understood what was missing.

Yes, I found this white thing. It is inside the case, white))

[qwistria]

I don’t know, of course, I read the posts of pros and cons, not everything so I agree with you- qwistria .
For example about a chopper. Coffee grinds perfectly, like sah. powder. And so that it warms up or "boils" (well, first of all, the instructions say that if you grind in one step, then no more than one minute). And why more, if I have it and in 40 seconds turns into dust?
And I am very pleased with the kneader. Loosely knead 3 loaves of bread at a time. The hook is doing great. And the power is such that I would hardly have mastered with my "biceps" to knead so much.
I adjusted the whisk lower, and even whips one protein (it would take me longer to get the hand mixer).
For a meat grinder, I will not say, I have not bought it yet, I'm looking for a 955, so that it is completely aluminum, without plastic. We'll see there.
But given that our prices are an order of magnitude lower than in Moscow, I think the purchase was successful.
Of the similar units on the market in our network, this is the most impressive.
Therefore, I studied it for about a year, until my husband gave it to him. He is a techie for me, he pays little attention to the appearance (this is all for me, under the interior) - and he immediately climbs "inside". Of all, only he agreed to.
I also want a juicer closer to summer, and some of the graders (I don't know yet which of the three is more needed), and then we'll see.
In any case, our polemic is useful.
In such discussions, and there is a golden mean!
I enjoy reading all the opinions.

pysy. qwistria, but about chondroitin, are you cool ... * JOKINGLY * and otkel such knowledge?

Inuska! Buy a rub of cottage cheese to rub, otherwise not only chondroitin, but also calcium will be lacking!

Guys, I'm bragging!
Olga prompted me the site, there are very decent prices for nozzles
for my 020.
In particular, my cube costs only 800 hryvnia, compared to 1100-1300 on other sites ...
Very attractive, tomorrow I will explore the territory)))
Who are interested in: IBS shop. com. yuei (English letters).
Olya, thanks a lot again)))

[AlenaT]

Hi, AlenaTI'm always welcome, I'm sorry ...
I’m also thinking about the cube ... but I don’t know if I need it, it seems like I want to ... maybe I’ll buy it in 2-3 weeks ... but I’m weighing all the pros and cons ... my husband caught fire with a potato peeler ... . but for me it's better to take a cube ... that's all I think ...

Inuska! Buy a rub of cottage cheese to rub, otherwise not only chondroitin, but also calcium will be lacking!

so you want me to gobble up cottage cheese and become a plaster monument? ...

Ol, so many girls say about the potato peeler that it is only good
for young potatoes, and the old one is very conditional ...
I somehow didn't want her at all ...
And as for the cubic, I will call tomorrow, I would like to be lucky.)))

but I don’t know, I don’t often make Olivier, my husband says buy, I don’t know if it’s advisable .... and it’s not a small amount of money, although it’s cheaper than on other sites, kapets, that’s at 340 I wanted and that’s all ... I’m thinking holidays coming soon ...

Hmm, I'll carry a knife and discs from a meat grinder tomorrow to sharpen it, since there are a lot of offices in Kiev dealing with this for restaurants.Let's see how the quality improves.

The potato peeler peels both old and young potatoes in the same way, but if you pour in a little water, as in all videos, then do not peel anything at all, even in a young one. More water is needed for the potatoes to almost float. It's just that the young one cleans faster and the old one takes longer, but the cleaning process is the same, it is simply gradually sharpened from all sides evenly. If there are a lot of mixed potatoes of different sizes, then the small one will be cleaned faster and then it will only wear off, decreasing in diameter if you do not pull it out, and the large one, after sampling the small one, will still be rubbed on the second run. Well, again, if you have deep-eyed potatoes and you are too lazy to clean the eye-holes, then you will have to wait even longer until the potatoes evenly grind in diameter to the level of the eye and cut them out, or you will get tired of waiting and you will not gouge out the eyes yourself ... Just don't use deep-eyed potatoes. Time and speed of rotation decides everything. Recommended rotation speed # 3 is absolutely not suitable for cleaning, the speed must be higher than 4-5.

So the myths about only young potatoes are only among housewives who have never used this very potato peeler.

Most likely, the girls were guided by the video, so they have nothing
and did not work)))
But now they have the opportunity to improve their combat skills)))

Olya, I really like 340.
Today I chopped a bowl of cabbage for sourdough at once, just need
get used to cutting the cabbage into such chunks so that in the neck of the nozzle
passed ...

So the myths about only young potatoes are only among housewives who have never used this very potato peeler.

I use it. And I will repeat once again that I have a period of using it only in the summer. I specifically buy small potatoes so that they can be cooked entirely with garlic and dill. To clean it by hand is tortured. And it's easier for me to peel ordinary old potatoes with my hands, it comes out much faster, unless, of course, you are cooking on a shelf. And even then, if a lot of potatoes need to be peeled, then you will have to make several bookmarks. You will then wash the nozzle longer. By the way, small potatoes are perfectly peeled at 2 speeds.

I also sharpened the grates and the knife from the meat grinder. It got much better.

So the myths about only young potatoes are only among housewives who have never used this very potato peeler.
[/ quote]
Gwistria, why are you doing that? I wrote that I was not very happy with the potato peeler. Here I was not too lazy to get the nozzle. I put 8 potatoes in it, the cleaning time is 4 minutes, it seems not bad, but I will have to clean it up .. I also cleaned the amount with my hands, much better and faster. I have three adult peasants in my family, I will have to make several such bookmarks. Conclusion: girl-th: super for a young potato, for an old one - pampering. In general, I am very pleased with the car, and I am grateful to the forum for helping me make the right choice. And even having such a combiner, sooner or later, we will all the same get all the attachments

I also sharpened the grates and the knife from the meat grinder. Much better.

how did this grill sharpen? Do they sharpen them? Are you talking about 3 discs with holes?

The girls, it turned out to be much more convenient to scoop out of the bowl not with my own spatula, but with silicone spatulas, spoons, which I bought for the multicooker.

[tatita]

That is why I sell it because in my family time is more valuable, and it is easier to peel it by hand in 2 minutes than to throw an old potato and wait 30 minutes.

tatita, 4 minutes chatting potato is like not chatting, it can be seen even in the photo. I threw and grinded completely the peel, why then was this potato peeler needed if then I finish everything with my hands as in your case?

And you have a small potato peeler at444, I have a more capacious at445, you can peel a lot more potatoes.

Something people called and called about a juicer and a potato peeler and the whole thing was gone. Who wanted to buy, you know, I'm leaving town for an indefinite time on Tuesday afternoon. Hopefully less than a week.

how did this grill sharpen? Do they sharpen them? Are you talking about 3 discs with holes?

yes, I handed over holes and a knife to the workshop.

Girls, maybe someone will come in handy)
Avito sells Kenwood 560 08, like mine for 23 thousand
🔗
I think they'll give it back for 20)

Tell me please, what is the difference between Titanium Major KMM020, and Titanium Major KM020

Tell me please, what is the difference between Titanium Major KMM020, and Titanium Major KM020

KMM 020 newer equipment there is a different form of rubber beater for cream, combine at 647 in km 020 -640th, glass blender in km 020 metal (a controversial issue which is better) still different scales may be different by numbers I don't remember

In short, I got confused, I need to be able to knead a tough dough into pasta and dumplings, so that you can beat everything and that you can put attachments such as a meat grinder and for making spaghetti ...
Tell me ...

oh sorry this is the difference between km023 and kmm 023

I couldn't understand the difference ...

yes they are the same, kmm updated - a nozzle for a cream of a different shape. On both, you can do everything, only you will have to buy everything separately - both a meat grinder and a dough sheeter and for spaghetti

I couldn't understand the difference ...

km 020 was simply updated, but the car itself remained the same

Damn, if you still need to buy some of the nozzles separately, then you can look at another model ???

You can just buy 20 and purchase the attachments you need.

Damn, if you still need to buy some of the nozzles separately, then you can look at another model ???

mean cheaper? they are still not very cheap if you mean kitchen. Kenwood machines, dough sheeters and spaghetti slicers - these attachments are in any case sold separately, not included in any set. Km 020.023 and above (070, 086) the most powerful-1500 watts, see what you need. it is not necessary to buy everything at once, you can gradually buy it, but it is a gift for yourself for many years

Is there an alternative to Kenwood?

As an alternative, this is Bosh or Kitchen Aid, but the Bosch attachments are somehow strangely attached, not very convenient, and the kitchen does not have any shredders. I started to choose with Bosch, after seeing everything I fell in love with Kenwood.

I thought, read it, and I think that we should stop at 010 ...

Here are just the meat grinder attachment I have left from the meat grinder itself ...

KMM 020 newer equipment there is a different form of rubber beater for cream, combine at 647 in km 020 -640th, glass blender in km 020 metal (a controversial issue which is better) still different scales may be different by numbers I don't remember

Dasha, you are mistaken: in km020 a glass blender, heavy, infection,
immediately there is an association with a cast-iron frying pan)))
I won't say about the shape of the nozzles, there is nothing to compare with ...

Dasha, you are mistaken: in km020 a glass blender, heavy, contagion,
immediately there is an association with a cast-iron frying pan)))
I won't say about the shape of the nozzles, there is nothing to compare with ...

I described it 023 - wedged both the scales and the harvester complete

Alternatives? Of course, the whole sea.
There are even similar ones in power.
There is also heating.
But there are no attachments similar in number, which, moreover, are not imposed en masse in the original configuration, but you can buy separately exactly what you need and as needed.
So, if, for example, you only need a dough mixer, then such a wagon and a small cart.
But appetite comes with eating. What if you want some more functions later.
Option 2: either buy all this with separate devices (and, by the way, there are ardent adherents of just such an approach) or purchase only additional attachments for the already existing Kenwood CM.

[Olga VB]

Olga VB
And please advise, otherwise the spouse wants to make a gift, but I myself do not know what exactly I need ...

To do this, you still need to decide what YOU need.
That is, first determine the functions - this will give a range of devices.
Then decide what for - it will give hints on power,
Decide on the size of the kitchen room, the frequency and intensity of cooking, whether your family will grow and, accordingly, your needs will change, how easily and quickly you part with old appliances and acquire new ones, that is, whether you need to take into account the prospects, etc., etc. etc.
Only you know what you need in terms of functions and what you may need in the future.
And then you can choose the device, its characteristics, and a specific model
Maybe you don't need a CM at all, but, for example, a new fur coat.

Tanya, it already depends on your preferences in cooking
(and your family, of course))).
I bought Kenwood 020 in its original configuration (4 attachments for dough and proteins and
glass blender) exclusively as a kneader. In this capacity, he showed himself
absolutely irreplaceable assistant.
My husband was very impressed with the making of Easter cakes)))
The next one I wanted an ice cream maker, I chose the right moment, they were cheaper then.
Then the whole family sculpted dumplings and decided that the dough roll was just necessary)))
And by the season of workpieces we got a sieve - a wiper and a high-speed nozzle for tires -
forging-cutting. By the way, they really made the job much easier.)))
And since I moaned that cutting five kilos of eggplant into cubes is practically a feat,
and even rubbed a corn)))), then this predetermined the purchase of a cube, which happened the other day ...

So everything is in your hands)))

Well, my family is very fond of any pastries, dumplings, pasties, manty and other test snacks, I just think about what, but does it make sense to overpay for, for example, a blender, and a newer model ...

I here the other day decided to knead the dough on dumplings. For 500 grams of flour.
My 560-08. I did it !!! The dough is gorgeous kneaded.
So 1000 watts is enough for dumplings. Although I stood and looked, I was afraid that I would not pull, because the dough is steep.
But everything turned out great)
I also bought a dough roll for myself, tomorrow I take it)

The dough sheeter is a mess! I answer!)))

I confirm, weigh! Today I tried the first day, I was happy like a child. I also cut spaghetti, so I didn't know where to run with them, they almost hung on my ears Now we urgently need a dryer

Well, my family is very fond of any pastries, dumplings, pasties, manty and other test snacks, I just think about what, but does it make sense to overpay for, for example, a blender, and a newer model ...

Well, already more definite ..
This means that now we need a dough mixer and a dough sheeter. And tomorrow?
And how are you going to make the filling for these dumplings and pasties? Do you need a meat grinder or a processor with knives?
And for sweet pastries, cut apples or wipe cottage cheese?
And how much flour / dough you need to feed your family, how many eaters?
Do you include any pasta among the dough treats for your family? What exactly and in what portions?
And "any pastry" is both custards and choux pastry? Then also induction will not hurt ...
You figure out a list of wishes for yourself, and then the solution will ripen by itself.
After all, there are other KMs with heating, and there are meat grinders, and with pasta gadgets, and with different power, and with different configurations.
For example, when choosing KM, I went around a circle several times and again came to Kenwood 080 - he, I think, is optimal for our family.

As for a birthday present, it should be a gift for you personally, IMHO.
And KM is a gift for the whole family and, first of all, for those who are eating these pastries and pasties on both cheeks. Let him give himself for his birthday.
And then he settled down well: mine is mine, and yours is ours, that is, it is also mine.

Girls, don't even hesitate. Buy kenwood. He's just super.
I have it for more than 3 years, and while the glass blender crashed, for me it's even a lot ... I break all the glass quickly ... very reactive
And the rest everything works properly and helps me out despite the fact that I give birth one after another ... I would have disappeared without him.
It is still important to have a dishwasher for this type of equipment. Then no problem at all.
I 1.5 could not decide on such a purchase. Now I regret that I thought for so long.
It is also important to understand whether you like to use helpers. There are conservative people who find it easier the old fashioned way. I have a friend who doesn't use a dishwasher, but I can't get enough ...

Also for me opening the Kelly milk cooker. Porridge, milk creams - super!

I confirm, weigh! Today I tried the first day, I was happy like a child. I also cut spaghetti, I didn't know where to run with them, they almost hung on my ears Now we urgently need a dryer

I recognize myself
If you find a dryer - be sure to report back in Temko .... otherwise it is very necessary, but your hands do not reach.

Olga prompted me the site, there are very decent prices for nozzles
for my 020.
In particular, my cube costs only 800 hryvnia, compared to 1100-1300 on other sites ...
Very attractive, tomorrow I will explore the territory)))
Who are interested in: IBS shop. com. yuei (English letters).
Olya, thanks a lot again)))

I sit and compare prices with the site ... I bought a cube at Kenwoodshop .. for 1299 ... it even became sad ... it's good that it was a year ago.

I don't have 340A .. the price here is sweet ... I really want to buy, but I already have nowhere to add. Tell who has both a cube cutter and a high speed grater. Maybe discs are suitable for a cube cutter ... maybe it makes sense to just buy discs. Visually, they are with the same star in the middle ...

I use the cube cutter more often than other attachments. I love to cut onions on it. For example, I made pilaf. I chopped an onion on it, then I was too lazy to put the food processor on, all the more so to wash it later, and cut the carrot into cubes .. It turned out beautifully. Borsch, by the way, I also cut into cubes all ...

Therefore, I think at the expense of the high-speed one, that I am tortured to put and wash everything. But if the discs fit ... it would be cool .... Cut everything on one.

By the way, thanks for the site, I finally found the jars for an adequate price for a yogurt maker.

Oh, I also think about disks and a cube. How to find out whether they fit or not ...

Checked it out. Unsuitable.

Elanna, by the way about borscht)))
Are not borscht cubes too small?
And it is a pleasure to take off-wash-put on the 340 attachment
and everything turns out very quickly, you don't feel any discomfort ...)))

Checked it out. Unsuitable.

Thank you!
Here are the bastards .. they did it with a specialist ...

[Olga VB]

Olga VB
And please advise, otherwise the spouse wants to make a gift, but I myself do not know what exactly I need ...

I also chose between Bosch MUM and Phillips. Twisted, twisted everything. But Kenwood is the best in quality. I stopped at Kenwood KMC 013, but Already decided exactly on KMM 023. I'm really thinking, maybe I can take 084?
But I’ll rather take 023. There’s an action for them right now in Ukraine. I really want a quick, high-speed grater. therefore I will sell the food processor rather.
pysy About how I spent a week sitting on the forum using the terminology of Kenwood holders